The installation guides step by step to create linked clone pools?

Similar Questions

• Link on the installation guide for content Portlet Suite 11 g Release

  Hi all
  
  Anyone knows the link to get the installation guide for dissemination of content Portlet Suite 11 g.

  Hello

  I also had this problem initially, but in my case I had missed on the following steps:

  1.

  From a command line, run the WebLogic Scripting Tool (WLST), for example:

  WLS-HOME/as11r1wc/common/bin/wlst.sh

  Note:
  The script of WebLogic (WLST) tool is a script command line that you can use to create, manage, and monitor WebLogic Server domains. See the Oracle Fusion Middleware Oracle WebLogic Scripting Tool for more information.
  2.

  After initializing the script of WebLogic tool, type connect() and press ENTER.
  3.

  You are prompted to enter the user name, password and server URL Admin. Enter the following values and press ENTER.
  4.

  Once connected to the server, run the following command to register your WSDL:

  registerWSRPProducer('webcenter','Provide_Any_Name_for_WSDL_Handle','Your_WSDL>',timeout=500)

  For example:

  registerWSRPProducer (' webcenter', ' StellentWSRP ',' http://Host_Name:Port / SPC/portlets/wsrp1? ") WSDL ", timeout = 500)

  Referencing your content server

  WLST following controls should be used to create, delete and reset an Oracle Content Server connection:

  Note:
  Custom managed server on which CPS is deployed and the WLS_Spaces server must be restarted after you run the following commands to make the changes take effect.

  *

  Run the following command from WLST to create an Oracle Content Server connection:

  createJCRContentServerConnection ('CPS_Application_Name', 'CSConnection', socketType = 'socket', 'Content_Server_Host' = serverHost, serverPort = 'Content_Server_Port')

  For example (if the CPS application name is StellentPortlets):

  createJCRContentServerConnection ('StellentPortlets', 'CSConnection','192.0.2.250 = ', serverPort = ' 4444' serverHost, socketType = 'socket')

  *

  Run the following command from WLST to remove Oracle Content Server connection:

  deleteConnection (appName = 'CPS_Application_Name', name = 'CSConnection')

  *

  Run the following command from WLST to restore an existing Oracle Content Server connection:

  setJCRContentServerConnection ('CPS_Application_Name', 'CSConnection', socketType = 'socket', 'New_Content_Server_Host' = serverHost, serverPort = 'New_Content_Server_Port')

  *

  Run the following command from WLST to list existing Oracle Content Server connections:

  listJCRContentServerConnections (appName = 'CPS_Application_Name')

  See if you've too missed to follow the above mentioned steps and if so then fill to see if the problem still persists.

  Hope this helps

  Thank you
  Srinath

• Trying to download my newly purchased Adobe Photoshop elements 14, after clicking on int o 'my account' and 'My orders', the installation guide tells me to click on the order for more information on the product and which works fine as well. However the ne

  Trying to download my newly purchased Adobe Photoshop elements 14, after clicking on int o 'my account' and 'My orders', the installation guide tells me to click on the order for more information on the product and which works fine as well. However, the next step where I press the download button is not possible, because the download button is not there... What should do? Also when I press the "see the recent downloads" and the error message is displayed.

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | Suite X | 9,8 | 9 standard | 8 standard
  • Captivate: 9 | 8 | 7 | 6 | 5.5, 5 | 1
  • Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2
  • Lightroom: 6.4|  6| 5.7.1| 5 | 4 | 3
  • Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
  • Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• Manager of RCMP and RCMP Intelligence - where to find the installation guides?

  Friends,
  
  I'm looking for installation guides for:
  
  Oracle Enterprise governance, risk and Compliance Manager 8.6.3.1 and Oracle Fusion governance, risk and compliance Intelligence 3.0.2.
  
  I could find the implementation guides, but there is no installation in detail steps. Can someone point me to it?
  
  Kind regards
  Prem

  Yes, it will certainly be included in the downloads of delivery in the docs folder.

• To the installation of custom (my) Labview drivers created using system driver instruments LabView 8.2

  I spent the day writing a driver for my new general i/o board for LabView using the creator of project pilot such Instrument indicated on the latest LabView tutorials. It works fine on my computer, even incorporated in the Panel 'Instrument i/o' on the toolbar. Really great.

  But! This must obviously be something that I can publish on a Web site or email to people for them to install on * their * computers! I tried to use the configuration settings as described in another tutorial in order to produce a zip file, a source folder and a Setup program. However, none of these export options seems to produce a labview library that can be opened without nasty error message on the files being found. Of course, the files are present in the directory, but it is looking for them in the * original * folder instead of either the file installation or a folder in a directory from the file to the library. It's really quite absurd, so I guess I'm doing something wrong... but I can't find information on how to do this right. When I followed the instructions I can find, it does not at all.

  What I * should * was that, if I created an installer, when an end user with LabView installed ran the installer it would integrate the new Instrument of e/s vi in their panel of LabView. But this does not happen. In addition, when you look in the installation directory (by default not the LabView directory), but a directory in Program Files/driver-name all the files are there. But if you open the library in the directory of the Volume, he complains about the vi being in the wrong place, then load them in the wrong place.

  It seems clear that the behavior of the installer must be to put the appropriate files in the location where LabView research instrument drivers. That is not that this disturbs the bajeezus out of me. Can someone explain me or give me a link to the instructions how to accomplish this feat apparently obviously necessary? I can possibly download my driver to the network NOR, but I want to at least test it out first!

  I've attached a zip file of the installation directory, which I do not understand in the runtime environment for reasons of size. I've also attached a zip file of the original directory. It won't work unless that place in the correct location in the folder of LabView. He probably has an older version of I've been using the build options.

  I think I got this figured out, maybe, others may use the solution.

  On the "Source Files" category in the specifications of construction for an installer, [LVDIR] represents the LabView installation directory. So, if you create the directory instr.lib under [LVDIR], you are installing in the root directory of the instr.lib. Then, create another folder named identically in your project source directory (so that it can find the files) and mark in the installation directory. On the side of the project view, open 'My computer', choose your lvlib on the left and your installation on the right directory and click on the right arrow between the two panes. This will create an installation directory structure in the correct location on the target.

• Can someone point the installation guide for gc

  I'm new to gc can someone point the 11g installation guide

  Here is the link http://www.oracle.com/technetwork/oem/grid-control/documentation/oem-091904.html

• Created the Group Linked Clone/pool - now how to connect to / them?

  OK, I got the pool group / a linked clone. Now, what should I do to connect with them? I worked off the coast of the "VMware-View4-EvaluatorsGuide" and there is nothing after having created the group/pool? So, how do I connect to this pool? I've created or set it to 5 desktop computers.

  Anything will help maaaaannnn... cuz this trial and the guide is just don't do it for me.

  Thank you

  OK, don't know if the guide had suggestions on the construction of your model, but you must make sure that the view agent is installed on your VDI machines.   You must also ensure that the client view is installed on the computer that you connect from.    Once entitle those who have been verified a user to use the admin view pool manager.  You can then connect on the vdi client and should be able to access the pool.  Simply specify your connection broker name after you run the client from the view.

  If you have found this device or any other useful post please consider the use of buttons useful/correct to award points

• Cannot start the master VM once linked clone pool is created

  With the help of ESXi 5.1, I created 3 floating linked clone distinct categories of 10 clones each. Everything works fine until I try to turn on the master after the linked clones are available. I get an error:

  Cannot open disk ' / vmfs/volumes/volume/vm/vm-000002.vmdk' or one of the snapshot disks it depends on.

  He made this 100% of the time. No exception. I manually loaded a basic system of Windows 7 x 64 flat and converted a x 64 and x 32 using the P to the converter V. All systems do exactly the same thing. All files are where they say the man should be.

  I can attach some files are required. Just need help. Destroy my master and create whenever I dial the linked just clone pool seems exaggerated.

  It is not the virtual disk controller that is causing the problem (I just mentioned in order to make you aware of it). What is most likely the origin of the problem is the format of virtual drive not supported (twoGbMaxExtentSparse) which is used for the virtual disk. I suggest that you follow http://kb.vmware.com/kb/2036572 to convert the virtual disk shaped ESXi supported, which should solve the problem. Please keep in mind that this will require free space on the data store (the size of the configured virtual disk size - ~ 233GB).

  André

• New installation of 6.1 of the Horizon. It is normal that provisioning linked clones will take a lot of time?

  Hello

  First, I will describe my setup:

  1 Management Server: Dell PowerEdge R730 48 cores, 2.5 Ghz with 9 drive HARD 300 GB SAS 15 K (RAID 5) and 256 GB of RAM

  2 hosts VDI server: Dell PowerEdge R730 48 cores, 2.5 Ghz with 9 drive HARD 300 GB SAS 15 K (RAID 5) + 1 SSD 200 GB, 256 GB of RAM, 2 K1 grid cards

  1 unit number logic on a Dell Equallogic PS6110X (750 GB) where I put the masters.

  1 switch Dell N4032F (10 GB)

  All the server has 4 10 GB ports configured with NPAR (so, I have virtual network card of 6 x 10 GB for storage and 6 virtual network adapter for the network of the VM) and 2-port 1 GB for the management.

  My master: Windows 7 SP1 x 86 optimized with 24 GB HDD Thin-Provisionned (2 vCPU 2 GB of RAM, 3 VMXNET network Card). There is no application has added to this master.

  I can't ask the Microsoft VMXNET 3 fix because it is said that this patch is not applicable.

  I have no VSAN because that only 2 VDI hosts, so I set up my stock for each guest with local storage for the linked clones and SSD local for the replica.

  When I run the provisioning of the office pool (17 VM):

  The clone of the replica (Equallogic == > local SSD) aura 2'30 "... It's good for me (113 MB / s... the Equallogic is also used for another another LUN storage server)

  But the rest of the entire operation completes the provisioning will take 40'.

  More than 50% of carrots is around 100% of the CPU on the host.

  I tried to change my (9 disc hard + 1 spare) RAID5 to RAID10 (10 HDD). It will take 50'.

  And, when all of the operations are completed. I have 2 or 3 VM with the message: Agent unreachable and 1 or 2 crashes on the provisioning.

  One recompose your desktop one VM will take about 1'30.

  My question: it is normal that commissioning will take so much time?

  And another question: when I'm connected to a virtual desktop computer with customer Horizon during a pool commissioning, the freezing of the VM or I can't just plug. Although I Office ready. And sometimes, vCenter client will freeze to a large number of seconds during deployment

  Have someone idea?

  PS: Sorry for my approximate English ;-)

  Solution: I replaced the lsi_mr3 of storage vmware with the driver megaraid_perc9 driver.

  Thanks to ddewire for his help.

• How to change the computer name of existing desktop computers linked clone pool?

  Hello

  I'm curious about something that has developed in our Organization.  New guidelines came down and we have to change the name of the computer for all of our offices to meet the new criteria.

  I have many of our users is on the offices of Linked-Clone (automated pool, dedicated, assignment see 5.1) which will have their names have been changed.  I use a 'model' for the name of the computer.

  I tried this before by simply change the settings of the pool, and then recompose the pool.  Recompose worked well, but NONE of the virtual machine names have been changed.  All machines, recomposed just fine, but keep the old name of the computer (non-compliant).

  How can I change the name of the computer of my clone in an existing pool offices?  Maybe I have something wrong.  I'm doing it instead of having to create a new pool and move the persistent disks.  I would like to change the name in the settings of the pool and recompose, but it did not work.

  Scenario:
  See 5.1

  Automated cloning related pool

  Assignment of dedicated (persistent disks)

  Thanks in advance

  It is not possible to change the name of existing workstations by modifying the settings of the pool. There is no way to make this happen automatically and in doing so manually would not seen happy.

  Unfortunately, for dedicated pools, you will have more work to do. If you do not use Persona you detach the persistent disks and recreate virtual machines in the pool with this disk to create a new virtual machine with a new name to be generated.

  If you use Persona you could remove all virtual machines and have Persona to extract profile data down to the virtual machine that would be entitled to the user when they connect then. This will cause all user installed programs go, but I hope that's not common if you are already using linked clones.

  I encourage to go to the next page, click on the feature request form link and publish information on what you're trying to do:

  https://www.VMware.com/support/policies/feature.html

  Notifications about features are reviewed by VMware and if you can get enough of your friends/colleagues notice to users to ask something often a solution will grow in any kind, nature or form.

  Hope this helps.

  -Mike

• For loop create linked Clone

  I have a script that will create a clone that is linked to from a snapshot, apply a cuztomization and start the virtual machine, what I want to do is create a loop for who would do this for multiple virtual machines. but I have no idea how to do so I don't know a loop, that's what I need, but I don't know how I should format the code.

  Here is my script up to now:

  [Code]

  to connect-viserver 'vCenter5 '.
  $sourceVM = get - VM 'Pano-VM-1 | Get-View
  $cloneName = 'Pano-VM-1.
  $cloneFolder = $sourceVM.parent
  $cloneSpec = new-object Vmware.Vim.VirtualMachineCloneSpec
  $cloneSpec.Snapshot = $sourceVM.Snapshot.CurrentSnapshot
  $cloneSpec.Location = new-object Vmware.Vim.VirtualMachineRelocateSpec
  $cloneSpec.Location.DiskMoveType = [Vmware.Vim.VirtualMachineRelocateDiskMoveOptions]: createNewChildDiskBacking
  $sourceVM.CloneVM_Task ($cloneFolder, $cloneName, $cloneSpec)
  Set-VM 'Pano-VM-1' - OSCustomizationSpec "Pano-VDI" - confirm: $false
  Start-VM 'Pano-VM-1' - confirm: $false

  [/ Code]

  Thank you.

  for ($i=0; $i -lt 10; $i++) {
  

  $sourceVM = get - VM 'Pano-VM-1 | Get-View
  $cloneName = ' Pano-VM-Clone-$I ".
  $cloneFolder = $sourceVM.parent
  $cloneSpec = new-object Vmware.Vim.VirtualMachineCloneSpec
  $cloneSpec.Snapshot = $sourceVM.Snapshot.CurrentSnapshot
  $cloneSpec.Location = new-object Vmware.Vim.VirtualMachineRelocateSpec
  $cloneSpec.Location.DiskMoveType = [Vmware.Vim.VirtualMachineRelocateDiskMoveOptions]: createNewChildDiskBacking
  $sourceVM.CloneVM_Task ($cloneFolder, $cloneName, $cloneSpec)
  Set-VM ' Pano-VM-Clone-$I '-OSCustomizationSpec "Pano-VDI" - confirm: $false
  Start-VM ' Pano-VM-Clone-$I "-confirm: $false
  }

  It should work.

• Cannot delete the linked clone pool

  Hello

  Please bear with me, as I'm still not a lot of experience with this product. I can't remove a linked clone automated pool manager. Virtual machines and records (including records perisitant) associated with this pool have all been previously removed (deleted from the drive) of vCenter. The pool remains Gray and in the State of "suppression", in the display manager.

  around every 45 seconds, this event is logged in the display manager:

  module = connection to the server. message = error commissioning took place the Pool win-xp-related-clones due to a configuration problem.

  I don't know yet where to start troubleshooting. Pool seems to think again its status of "supply", meanwhile, the menu pool bed and the pool is actually disappeared for a long time that the "deletion" status.  It seems that my SQL db view can be somewhat altered and that maybe I need to delete some data manually.

  What newspapers I consider to facilitate troubleshooting? I searched the journal of composer for the name of my pool (win-xp-related-clones), but there is no match.

  I run see 4.5 and vCenter 4.1.

  Any help is greatly appreciated! Thank you!

  Hello

  Take a look at this KB (1008658):

  http://kb.vmware.com/selfservice/microsites/search.do?

  language = en_US & cmd = displayKC & externalId = 1008658

  The same thing happened to me once, and that KB has been very helpful.

  Best wishes / Saludos

  -

• Join the Parent picture to the domain before you create linked clones?

  Do we not have to attach the image relative to the domain before creating a snapshot, and use it to float pools related clones?

  Agree with Mittim12...   Works either way, but we have our images of parent is joined to the domain before.  This help us to do things that is install OK on the image for domain use for users and allows us to do some more test before we deployment.

  Good luck... 

• Slow Internet, if the installation is not possible. need to direct links to installers.

  I live in the Isle of Man, an island off the British coast. We don't have a fast broadband connection and download CC applications through the CC desktop application is not successful. I desperately need to be able to access the installers, dmg files to install in offline mode on my Mac. I use Photoshop CC 2014 and LR 5 and I can not update one of them successfully. We are waiting for you to sort out direct links to installers for centuries now, what is the problem?  Please sort!

  LR is above and here's ps, Adobe Photoshop keep up-to-date

• Resize the linked Clone pool

  Hi all!

  We did a big pool and now want to get rid of the unused vm, optimized on windows xp.

  The pool has a size of 20 machines, but only 6 are used then, how can I check this without 6 used heavy disturbence?

  Is what I just change the amount of 20 - > 6 in the properties of the pool and remove these virtual machine in VMware View Admin who do not serve?

  I am grateful for tips how to reduce the size of the pool of size/member.

  Bernd Nowak wrote:

  Is what I just change the amount of 20-> 6 in the properties of the pool and remove these virtual machine in VMware View Admin, who are not

  used?

  Yes.

  AWo

  VCP 3 & 4

  \[:o]===\[o:]

  = You want to have this ad as a ringtone on your mobile phone? =

  = Send 'Assignment' to 911 for only $999999,99! =