New installation of 6.1 of the Horizon. It is normal that provisioning linked clones will take a lot of time?

Similar Questions

• Why for the last 3 days am I get the update of windows to shut down & boot-up/it takes a lot of time to complete their/TI is aqnnoying!

  I have windows7 home premium - when I stopped, I get updates - then I get them back to the start-up/it happens each time for the last 2 or 3 days-i use my computer toshiba laptop throughout the day and don't ever started day avant-ce that goes? There are unusually long for downloads to update?

  See this discussion: http://answers.microsoft.com/thread/cac55bf2-e271-e011-8dfc-68b599b31bf5 (which now includes a countless number of threads merged to confuse you more).

• Have Photoshop Elements since 2001.  A new computer with Windows 7 Professional 64 bit.  It does work on my new computer.  Which version is MORE SIMILAR to the old version that I have, which will take place on W7P - 64?  Thanks for any help.  Popjer

  Have Photoshop Elements since 2001.  A new computer with Windows 7 Professional 64 bit.  It does work on my new computer.  Which version is MORE SIMILAR to the old version that I have, which will take place on W7P - 64?  Thanks for any help.  Popjer

  You should probably just download the demo version of the EP 12 and see if you can live with it.

  Download a free trial version or buy Adobe products | Adobe Downloads

  That being said, you tried to install PES 1 on your computer?

  How much free space is on your hard drive?

  You have Internet Explorer 10 or 11?

  PSE 1 can run on windows 7 x 64, if certain conditions are met.

• Firefox has become very slow. It takes a lot of time to load any website. I reinstalled FF but the fleeting problem.

  Firefox has become very slow. It takes a lot of time to load any website. I reinstalled FF but the rest of the problem.
  As a test, I downloaded Chrome and it is much faster.
  But I love FF and would be very happy if you can help me solve this problem.

  Hi Reos,

  When you reinstall Firefox it always uses your old profile with all the old things that you had. That said, you're lucky, there is a new feature that lets you "Reset" of Firefox. This will remove some of the pieces that might cause problems while it keeps your bookmarks and other important things safe.

  Check it out and let me know if it works: Refresh Firefox – reset the parameters and modules

• Installation... Using Windows 7 64 bit - Install takes a LOT of time... is this normal?

  Installation... Using Windows 7 64 bit - Install takes a LOT of time... is this normal?   It's been over an hour...

  then you have probably lost connectivity.  If you are using a wireless connection, try a wired.

  If necessary, you can use a download with direct download manager,

  Downloads available:

  • Suites and programs: CC | CS6 | CS5.5 | CS5 | CS4 | CS3
  • Acrobat: XI, X | 9,8 | 9 standard
  • Premiere Elements: 12 | 11, 10 | 9, 8, 7
  • Photoshop Elements: 12 | 11, 10 | 9,8,7
  • Lightroom: 5 | 4 | 3
  • Captivate: 7 | 6 | 5
  • Contribute: CS5 | CS4, CS3

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• When I turn on my computer until the start menu is ready before I click on internet, it really takes a lot of time

  When I turn on my computer until the start menu is ready before I click on internet, it really takes a lot of time. Why?

  Hello

  Did you do last changes before the show?

  I would like the season you follow the steps in the link and check if that helps.

  Method 1: Perform a boot clean and chcek if it helps.

  How to configure Windows XP to start in a "clean boot" State

  Note: Once the diagnosis has been made, make sure you try the step to configure Windows to use a Normal startup state in the article in order to reset the computer as usual.
   
  Method 2: You can also check out the link and check if it helps.
  Advanced Troubleshooting for General startup problems in Windows XP

• How can I connect the new installation of Windows 7 for the user profiles on a separate drive har?

  Original title: connect Windows 7 to the output of user profiles?

  I want to reinstall Windows

  My user profiles are on a separate HARD disk
  Is it possible to connect the new install of Win 7 to these existing profiles
  Or I'll create all new profiles and just move all the files manually?

  You can change the registry so that it points to your old profile folder. However, I suspect that this would cause problems because the SID and many registry keys would be incorrect for the current installation. I would like to move the folders manually.

• How to change the computer name of existing desktop computers linked clone pool?

  Hello

  I'm curious about something that has developed in our Organization.  New guidelines came down and we have to change the name of the computer for all of our offices to meet the new criteria.

  I have many of our users is on the offices of Linked-Clone (automated pool, dedicated, assignment see 5.1) which will have their names have been changed.  I use a 'model' for the name of the computer.

  I tried this before by simply change the settings of the pool, and then recompose the pool.  Recompose worked well, but NONE of the virtual machine names have been changed.  All machines, recomposed just fine, but keep the old name of the computer (non-compliant).

  How can I change the name of the computer of my clone in an existing pool offices?  Maybe I have something wrong.  I'm doing it instead of having to create a new pool and move the persistent disks.  I would like to change the name in the settings of the pool and recompose, but it did not work.

  Scenario:
  See 5.1

  Automated cloning related pool

  Assignment of dedicated (persistent disks)

  Thanks in advance

  It is not possible to change the name of existing workstations by modifying the settings of the pool. There is no way to make this happen automatically and in doing so manually would not seen happy.

  Unfortunately, for dedicated pools, you will have more work to do. If you do not use Persona you detach the persistent disks and recreate virtual machines in the pool with this disk to create a new virtual machine with a new name to be generated.

  If you use Persona you could remove all virtual machines and have Persona to extract profile data down to the virtual machine that would be entitled to the user when they connect then. This will cause all user installed programs go, but I hope that's not common if you are already using linked clones.

  I encourage to go to the next page, click on the feature request form link and publish information on what you're trying to do:

  https://www.VMware.com/support/policies/feature.html

  Notifications about features are reviewed by VMware and if you can get enough of your friends/colleagues notice to users to ask something often a solution will grow in any kind, nature or form.

  Hope this helps.

  -Mike

• External sample clock change takes a lot of time on the SMU-5186

  Hello

  I use the external Lv - niScope EX Clocking.vi example to define SMU-5186 using an external sample clock.  However, it takes a long time, 5-6 minutes, before I can get the first block of data acquisition.

  Then I run the example 'niScope EX Acquisition.vi Configured' to switch to dashboard clock. There are also 5 to 6 minutes on the first acquisition.

  I think maybe the SMU-5186 made some calibration when I change the source of the clock.

  Anyway is to ignore the calibration? Or make it faster?

  Thank you very much

  Yiming

  Yiming,

  Delays in acquisition are caused by calibration routines that must be performed on the engine to sample (ADC) every time that changes sampling rate.  This ensures our justified precision specifications.

  I don't know if you've noticed also calibration of Power-Up, which will take 5-10 minutes to complete when the unit is turned on.  This is mentioned in our specifications at page 18:

  http://www.NI.com/PDF/manuals/373257b.PDF#page=18

  I hope this helps.

  Nathan

• Without LAN connection after logon applied credentils it takes a lot of time to load items on the desktop

  Original title: startup problem

  during the priming of the laptop without LAN connection after logon credentils applied it takes a long time to load the items on the desktop, but by connecting the laptop with LAN a boot of the computer LAPTOP, all right, please provide a solution for this problem of starting.

  Hello

  I removed IE 8, now it works fine

• Problem with the new installation of Windows XP on the Satellite A100-259

  Hi all!

  I have a problem with the fresh install WIN XP on Satellite A100-259 (PSAA2E).
  I already deleted the partition, formatted (NTFS) and tried to reinstall from recovery disk that initially provided with the laptop. But whenever I try to install a problem is detected (for the most part it's 'page in the nonpaged area failure').

  I also tried to install the OS directly from MS Windows XP Home Edition SP2 CD - the same problem.
  I checked the partition using PQ Magic and discovered that there are ' partition table error #110 ".» So, what I did:

  (1) delete partition-> create new partition-> format (NTFS)-> reinstall from recovery disk-> has not yet;
  (2) partition delete-> install WinXP CD original by create and format partition option-> has not yet;
  (3) delete the partition (using the magic of pq)-> create partition (using the magic of pq)-> format NTFS partition for win xp option-> check partition-OK no problems don't-> installation of original win XP CD-installation without changes-> option failed even once
  (4) delete the partition (pq magic)-> create partition (pq magic)-> format NTFS partition for win xp option-> check partition-OK, no problem-> installation of the recovery disc-> has not yet

  Whenever a different error is detected, so I can't identify the problem. I don't know what to do. Does anyone have any ideas?

  Hello

  Seems that there are some problems with the standards of the partitions.
  A friend of mine has tried to install the OS on the recovery CD on the laptop that has been formatted with Partitions Magic 8 and the installation failed.
  It was very strange

  Finally, we have formatted the whole HARD drive using the CD original Windows XP Pro.
  We did not remove the partition but simply kicked this CD and after the configuration process spent, we formatted the whole HARD disk and install XP without creating all the partitions.

• Problem with Windows Update after the new installation of Windows 7 Pro the Lenovo ThinkPad X 200

  I'm trying to do a fresh install of Windows 7 Pro on a Lenovo ThinkPad X 200. The product key is easy to find on the sticker of the ThinkPad. However, the version of Windows is hidden (for example, I can't check that my ThinkPad had originally installed Windows 7 Pro). I was able to install by using a Pro Win 7 SP1 CD ROM I bought for another installation. I used the ThinkPad I was trying to make the new facility on the product key. I was able to activate the Windows 7 Pro using the phone call and my cell phone. I checked the activation! However, I have problems with Windows update. The product key may be a different version of Windows 7. If so, why did it install and activate OK? Y at - it a fix for this problem or I have to buy a new version of Windows 7 Pro? Please note that I have not yet installed all drivers Lenovo ThinkPad as I can't seem to install correctly. Thank you!

  Since the issue is updated to Windows, it is not a product number key.

  You can reset the Windows Update components by running the Fixit on this page. But if there is malware present, she will continue to reset the connection to the update servers:

  How to reset the Windows Update components

  http://support.Microsoft.com/kb/971058

  Suggest you download and save the Fixit. Then configure the system before the clean boot by running:

  How to troubleshoot a problem by performing a clean boot in Windows Vista/Windows 7

  http://support.Microsoft.com/kb/929135

  Once the Fixit has been downloaded and the system is started in the pure State, check that the native Windows Firewall is now on if a 3rd party firewall has been used previously. Now run the Fixit and choose the default mode. Restart once it's done and see if the system can be connected to the update servers. If he can't, then rerun the Fixit and choose aggressive mode. Turn it back on when he finished the race and updates.

• New installation of SQL Server, disable the write cache?

  Hello, I'm under ESXi 5.1 and I need to configure a virtual machine Windows server 2012 for our first virtual SQL Server.  My database guy tells me that I have to disable the cache write for SQL best practices.  Is it always true when it is a virtual machine?  If it is true where would I turn it off?  To add a bit more info about our storage on a network SAN Dell EqualLogic and we will use SQL 2008 as SQL 2012 is not yet supported.  Thanks for the help!

  I think that your SQL guy assumes the ESXi host will be caching on its own transparent for the VM by default. This is incorrect, ESXi does nothing like that.

  The only place where caching of write i/o can happen is on the side of physical storage outside ESXi, so in your case the SAN controllers (no reason not to have this license here too long as it is on battery/flash) or the discs themselves (ugh, it is never enabled by default for a good reason).

  BTW: I'm pretty sure that SQL 2008 is not supported on Server 2012.

• New installation, error: failed to create the Scratch disk: disk error

  Location: Windows 7, had everything works fine. Added the SSD and installed system from scratch on the SSD. Old drive now is my second drive.

  Try to work on the second (old) drive drive to reduce wear to the SSD. But whenever I do, I get disk error message and it erases all my settings (so boring!)

  I think it's a permissions thing since I had to deal with this already to a certain extent, but I don't know how to solve this problem, because I do not know where adobe tries to save the file. Any tips or ideas?

  RESOLVED: I mess with permissions, but I think that what he did was following some advice I found elsewhere related to problems of registry Illustrator. I did the settings to change, then I found Photoshop in the start menu and right click > run as administrator. That seems to have done the trick.

• The new iPhone 7, display lights on the move - is this normal?

  I just bought an iPhone 7.  Whenever I pick it up the screen lights up before I hit the home button.  Is this normal?

  I guess that when I'm carrying it, it will keep light upward, and then jump.

  Yes, it is a new feature in iOS 10 called "Raising to wake", where you can check the notifications on the lockscreen without hitting the power button / stop or the "home" button.  I don't know if I like it or not, but I currently have always it turned on.

  To disable this option, go to settings, display and brightness and toggle the revival to Wake OFF.

  I played around with it a bit, and it activates especially when moved from horizontal to vertical (for example pick up placed on a desk), but no say, low vertical, high portrait.  So depending on how you wear the phone (pants pocket, Pocket jacket, holster, backpack, etc.), it may or may not turn on unintentionally.