The installation of SP1 for Vista and now windows does not start.

Similar Questions

• Loaded IE 8 optimized for AT & T Yahoo and now windows does not start at the top.

  Yesterday, I installed IE 8 optimized for AT & T Yahoo. When it restarted to complete the process, he went to the ' start windows normally, safe mode, safe mode w/network, safe w/command prompt mode and the last known good configuration "screen... I tried to start windows normally, then the last known good configuration and not matter what I do it looks like its about to start up, then a brief blue screen flashes then I finish immediately at the start screen mode to choose. I don't want to reload windows if I have to. I wish now that I had stayed with my old AT & T Yahoo browser. He was doing very well until I have given and responsible for IE8.

  Thanks for the tip, but I finally found my answer on another site. I put on my xp drive, went to retrieve and type CHKDSK at the command prompt. It has helped to correct the mistakes, got rid of IE 8, and now I am running.

• Installed Defender pro 15-1 software anti-virus and now Windows does not start.

  Original title: can't get to start-up computor!

  I have a Toshiba laptop that won't not start when turned on. I have a windows vista 32 bit operating system. I recently purchased Defender pro 15-1 the anti-virus software and installed on the pc. After installation I tried to restart the pc, it would not pull up windows and it flashes just microsoft icon. I have tried F12 to restart to set the default values always nothing. What can I do to my pc?

  Hello

  Here's what I use and recommend: (these are all free and very effective versions.)

  Avast and Prevx proved extremely reliable and compatible with all I have
  launched on them. Microsoft Security Essentials and Prevx have also proven to be very
  reliable and compatible. Use MSE or Avast and Prevx, Prevx 3 but not all.

  Avast Home free - stop any shields is not necessary except leaving Standard, Web, and
  Operation of the network.

  Prevx - Home - free

  Windows Firewall

  Windows Defender (is not necessary if you use MSE)

  Protected IE - mode

  IE 8 - SmartScreen filter WE (IE 7 phishing filter)

  I also IE always start with asset if filter InPrivate IE 8.
  (It may temporarily turn off with the little icon to the left of the + bottom
  right of IE)

  Two versions of Avast are available 6.x and 4.8 x

  Avast - home - free - 6.x stop shields you do not use (except files, Web, network, &)
  Shields of behavior) - double click on the icon in the Notification area - real time Orange - click on the
  Shield that you want to stop - STOP. To stop the Orange icon to show an error indicator-
  Click on the Orange icon - top right - settings - click on the status bar - uncheck shields you
  disabled - click OK
  http://www.avast.com/free-antivirus-download

  Avast 4.8 x - home - free - stop shields, you don't need except leaving Standard, Web,.
  and the network running. (Double-click the blue icon - look OK. - upper left - Shields details
  Finish those you don't use).
  http://www.avast.com/free-antivirus-download#TAB4

  Or use Microsoft Security Essentials - free
  http://www.Microsoft.com/Security_Essentials/

  Prevx works well alongside MSE or Avast

  Prevx - home - free small, fast, exceptional protection CLOUD, working with other security
  programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here
  or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  PCmag - Prevx - Editor's choice
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Also get Malwarebytes - free - use as scanner only. If you ever think malware and that
  would be unusual with Avast and occasional Prevx running with the exception of a low level cookie
  (not much), to UPDATE and then run it as a scanner. I have a lot of scanners and they
  never find anything of note that I started to use this configuration.

  http://www.Malwarebytes.org/

  I hope this helps.

• I had to replace my hard drive and now windows does not recognize my product code valid what to do?

  I don't know what else to add, it's an HP computer and I've had it for 3 years. the hard drive has become corrupted and I replaced it and now windows 7 Home premium that I bought from best buy does not recognize as valid product code. What now?

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

  or

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• HP ENVY 15-uo11dx: did a reset and now it does not start

  I did a reset system where I chose to erase all mt files and apps. Now, he ends up with the spinning thing and does not start. I can get info from the bios with the F2 key and updated and then restored to the bios and nothing.

  Well I thought about it myself by pressing the F11 key several times and following the menu there. Thanks to this HP online

• I put norton on my pc and now it does not start

  I put norton on my pc and when I start the pc, the sign of the window appears but the pc does not start then. I think I have more than a secruity of the internet on the pc. I was told to start in safe mode and remove all of the programs, I have, but still have the same problem. Can anyone help please.

  Since then, you can start safe mode, run a restore of the system to a point just before the installation of Norton if possible.

• Installation of Vista on the new hard drive was interrupted, and now I can not start the computer

  So I decided that I need a bigger hard drive. I got a 500 GB hard drive, so I have it PLOPPED in my Acer Aspire 5517 with my vista boot drive, turned on and began to go through the process. Once he got to the phase 'installation complete' it seems to take a while, so I let it run all night. Once I got up, it was on a black screen with the mouse, I let stand a few more minutes but still nothing. I turned off and started it expects to find to return at the beginning of the installation, but instead he began to start from what is on the hard drive at this time. It got to the screen with the loading bar and the sign 'Microsoft Corporation'. The loading bar was very frigidity and stopped and started randomly. I let it do this while I went to school, but when I got home, it was always the same loading screen. I rebooted and tried to start in safe mode, but when I do it it stops at crcdisk.sys, and never forwarded charges. I tried to do the reset thing factory start it but that doesn't seem to work. My other puny hard drive still works, but the other does not. I searched the internet but have not seen any other problem like it. I want to just start completely clean of my new 500 GB. Please help!

  Hi James,

  1. What is the number of brand and model of the hard disk of 500 GB?

  2. How did the 500 GB hard drive connected to the computer? It is external or internal?

  To troubleshoot the unable to start the issue to cause corrupted driver, some files that can not be loaded during the startup process must be fixed or restored. So, let's check the disk by using the Windows Recovery Console.

  (a) put the Windows Vista installation disc in the disc drive, and then start the computer.

  (b) press a key when the message "Press any key to boot from CD or DVD ".

  (c) select a language, a time, a currency and a keyboard or another input method, and then click Next.

  (d) click on repair your computer.

  (e) (click on the operating system you want to repair), and then click Next.

  (f) in the System Recovery Options dialog box, click command prompt. Type chkdsk c:/f to try to correct the errors.

  (g) Note: answer them when chkdsk asks you if you want to check the disk next boot Vista

  (h) after the recording of the disc, and then run sfc/scannow to check the corruption of system files.

  Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.

  Check out TechNet help links and check if that helps:

  The computer starts stops at crcdisk.sys

  Help! Vista won't start... (crcdisk.sys)

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• interrupted vistas system restore and now it does not start at the top. The only way I can access advanced boot options is by pressing F8

  Then I tried to start Windows normally or in Mode safe and it does not work.

  None of these advanced startup options work effectively.

  When I turn on the laptop, the VAIO large appears and then Microsoft corporation and then a quick start of blue, then it tries to restart again again and again until I hit F8.

  I hope this can be repaired.  Thanks in advance for anyones help.

  Hello

  as none of the advanced startup options does work, try this:

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

• Installed Vista Update 1 package and now windows will not start

  I have a laptop Acer Aspire 4520 with a 32-bit system 64 x 2 dual core processor with Windows Vista Home Premium and just installed explorer8 updates Vista I get the package. Installed successfully, took about 45 minutes. Tells me to restart my computer. Click on restart. It restarted with goin' through bunch of # s as the first part 24 390 / 74 280 in growing in order to achieve the final number that it stopped at about 34 761 or something like that for over an hour.  I assumed that it froze. I did a hard closed down and after reboot door top, unable to start Windows.  A recent hardware or software change might be the cause and options to start windows normally or start the reboot system (recommended).  I chose normally, microsoft corporation logo came on screen with progress/cargo in addition to this box, and then it turns off and rebooted itself.  This time I chose the launch startup repair and he went to remove some threads or something and add as 9 things that did not file names.  He said he was doing a CLNDSK?  It was the only time he's done this. Now, either you the hit button brings up a blue screen that says "a problem has been detected and windows has been shut down windows to avoid damaging your computer."  If this is the first time you've seen this stop error screen, restart your computer.  If this screen appears again, follow these steps: ensure that new anuy hardware or software is properly installed.  If it is a new installation, ask your hardware manufacturer or software, the windows updates, you might need.  If problems continue, disable or remove any newly installed hardware or software.  Disable the BIOS memory options such as implementing caching or shading.  If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select advanced startup options, and then select Safe Mode.  Technical information: * STOP: 0x0000C1F5 (0x00000000, 0x00000000, 0 x 0000000 0x00000000) is once again this whole message on a blue screen in which you can proceed to any other, but to stop the machine.  I even tried the advanced, including Boot Options: repair your computer, safe mode, safe mode with networking, safe mode with command prompt Mode Mode Mode, boot logging, enable video low resolution (640 x 480), last good known Configuration (Advanced), Directory Services Restore Mode, Debug Mode and start Windows normally.  Disable the automatic restart on system failure works.  Another option is the F2 key on startup.  I CAN'T go near a window to start it's totally out!  And I do NOT have a disk of Vista, that it came with it.  Need solutions before I go out my hair.  (Good operating system until the download and I only downloaded this because I download Adobe Flash Player 11.2 problems and I thought about updating my Windows can help)  Ready to take this computer back unless it is quickly fixed.

  .. .just for a future heads up what should I update on a new system from Microsoft.

  All the day of security offered by Windows Update/Automatic Updates. See http://windows.microsoft.com/en-us/windows7/Updating-your-computer

• I downloaded webmail add Blocker for firefox and now youtube does not display images... Help

  I have downlaoded webmail add Blocker for Firefox, so I can get rid of the side ad right in hotmail (Outlook) which works very well, but now many of the videos on youtube shows not a picture although I can hear the sound.

  Is my prolem I downloaded add blocker everything worked fine beforehand. If so, how can I get rid of the problem? Uninstall add blocker? How do I do that?

  Please help me. I'm old and not much less computers. My stress level go up when it does not work properly.

  Make sure that your ads block non-blocking images.

  GoTo > tools > Options > content

  • Check > 'load images automatically '.

• My saved favorites does not appear on the html bar when I typed the first letter! He appeared and now it does not work! How and what do I do?

  Help! My saved favorites does not appear when I type in the first letter. For an example, I saved "www.facebook.com" as one of my favorites. Whenever I go into facebook, I'll just enter the letter 'f' and he goes, a drop down link in the html bar then I'm leaving for facebook! But recently there have not been showing bookmarks I saved. I reinstalled firefox and it does not solve the problem at all. How and what do I do?

  Make sure that the address bar is not set to 'Nothing': Tools > Options > privacy > address bar: when you use the location bar, suggest: history, bookmarks and bookmarks - see Smart Location Bar

• M477fdw: Updated Firmware for M477fdw and now it does not print correctly

  I noticed that I had an update on the printer, then I hit install update. After the updated whenver I print print hollow letters. I wouldn't change a thing on my Mac, I even tested it from a Windows machine I have. The first page prints always hollow and the rest of the normal printing pages. I have reset to factory settings. The only thing I can think is that the upgrade breaks the functionality. Someone had this problem?

  You're not alone.

  Others have reported that they have corrected this by setting the printer to factory settings. It is possible that the reset method, you used did not do.

  Make a note of your existing settings before doing so.

  Once you have done this:

  (1) turn
  (2) power on
  (3) when the hp logo appears, hold the lower left area of the touch screen.
  (4) release when the following message appears.

  Then, set up the machine again.

• I reinstalled Deamweaver and now it does not start

  Hello

  I had to reinstall Dreamweaver and I did.

  
  

  But now, there is an incorrect entry point problem.

  How to fix this?

  Thank you

  Serge
  

  Entry point errors mean your system does not meet the requirements, or a system DLL is missing. Since you seem to have had this job before, be sure to install all the updates and also ensure that the MSVC 2008/2009/2010 Microsoft runtimes are installed correctly. Install the manualyl, if necessary.

  Mylenium

• Accidentally shut-off valve in the process of Sir on my laptop, now Windows does not...

  As the title suggests my... If was an accident, but I stopped the process of Sir in the Task Manager window and I got a blue screen of death. He created a backup file and then turns off. I tried to turn it back on, but all I get is an error message from Braodcom and Media test failed message and an operating system not found message. I don't know what to do and I'm very inportant information on my hard drive that I can't lose.

  Is there a way to fix this or am I GROUND?

  HI U.S. - soldierARNG.

  What is the exact error message on blue screen?

  Check that there is no CD/DVD in your CD/DVD drive.

  Disconnect all hardware devices.

  Check the BIOS to make sure that your hard drive is always selected on the primary boot device.

  You have access to a Windows recovery disk? If so, follow the steps in this document to complete the Startup Repair.

• Windows Vista crashed and now it does not start. How can I repair this installation of Vista without reinstalling everything?

  Have Dell 3000 demison he lost a boot file and goes to DOSS wanting to erase the c drive and install vista. Have a vista from microsoft. This tip on other pc

  original title: had a total crash

  Hello E.B.Ballard,

  If you do not have a DVD of Microsoft Vista, download and make you a disc of Vista startup repair or restore the system from this link:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use this disc:

  http://www.bleepingcomputer.com/tutorials/tutorial148.html