The interface usb audio of Behringer U-Phoria UMC404HD work with Garageband?
I just got an interface USB 4 channels for recording guitars and microphones. It has no driver, but instead uses the Mac OS. I implemented the sound control panel to recognize the device input and output, can I use the Audio configuration utility and MIDI to fit a recording at 192000HZ.
My problem is that as soon as I open GarageBand 192000HZ setting falls down to it is more low 44100 HZ. It is a flaw with the audio interface Behringer or is it a problem of system software?
I will mix Behringer messages on this problem, a guy says that the interface has a bad component castigates other Garageband.
I would appreciate hearing from anyone with any interface from Behringer, who used it to 192000HZ using Garageband. Any other comments welcome.
I have this problem on 3 different computers using systems to a new installation of 10.11 10.6.8. A few different USB cables. More recently, on an I7 Mini with memory 16 concerts with 10.11.6. Currently on Garageband 10, but the same problem with Garageband 6
I talked to an Apple technician and the answer is that Apple has "capped" sampling in 441000HZ setting.
Thus, in spite of the box is designed to accept 192000Hz sampling, apparently GarageBand has been paralyzed for a lower sampling only to the adjustment system. Another program audio I, Amadeus Pro, has no difficulty with the parameter to 192000.
TSK, tsk Apple...
Tags: iLife
Similar Questions
-
Adobe flash is updated, but firefox says its not installed and install. Flash does not work in sites using Firefox, but the same read in IE or Google chrome sites work with flash. I use a dell high spec, less than a year using windows 7 Home premium processor Intel (r) Pentium (r) CPU P6100 @ 2.00 GHz, 1999 Mhz, 2 Lossnay, 2 logic and McAfee Firewall and AV processors
Thank you so much for pointing me in the right direction... Unfortunately, the link does not work but I bypassed using a part of the link, I did a search on google and found the plugin here. Adobe.com/Get/flashplayer/Current/install_flash_player.exe
Thank you so much,.
Johnny 777777
-
How to get the printer laserjet 3015 of all-in-one to work with hp520 touchsmartpc 64-bit with windows 7
Hi baldwinj,
Follow the steps outlined in the document below to install the OS driver in for this printer in Win 7 64 bit.
-
What is the measure to take to get my card to work with my hard drive that I just put in?
What is the measure to take to get my card to work with my hard drive that I just put in?
Run Windows Update and install all updates.
Also, visit your PC manufacturer's Web site and install the latest driver.
-
the dell photo printer 720 32-bit vista driver work with xp?
the dell photo printer 720 32-bit vista driver work with xp?
No, a Vista driver will not work with XP.
Check the Dell support site to see if they have XP drivers for your printer.
Reference Dell Driver Downloads:
-
The new update of Lightroom 6.4 doesn´t works with my 10.8.5 on a Mac OS. 6.3 Lightroom runs without any problem. Where this is the problem with the 6.4 Version?
You will need to first uninstall Lightroom.
Then, reinstall 6.0 from this link: Install Photoshop Lightroom
and upgrade to version 6.1 of this link: keeping up-to-date for Lightroom
-
Hey there, I have a problem, I paid for the creative cloud each month. 30 days ago, I downloaded the new update only in the trial version of photoshop and today the trial version has expired and I could not work with my old adobe program, although I pay for it.
Aileen,
Please see suggestions here: FAQ: what should I do if I have a subscription, but my application acts as if I had a trial?
Kind regards
Guinot
-
After getting a new mac mini, all of my adobe products worked except photoshop. I get this message. Check with the developer to ensure that Adobe Photoshop CS5.1 works with this version of Mac OS X. You may need to reinstall the application. Don't forget to install the updates that are available for the application and OS X. I bought it originally, but do not know were my installers are. Can I get a new installer?
1st, CS5 is 4 + years old so you MAY have problems with the latest Apple operating system
Yosemite sometimes has problems, often related to the 'default' permissions that need to be changed
-solution https://forums.adobe.com/thread/1689788 of a person
- and a Java update https://forums.adobe.com/thread/1507936
-Update may break things https://forums.adobe.com/thread/1772260
2nd, try previous versions http://www.adobe.com/downloads/other-downloads.html
-
Help, going crazy here!
With MP3 encoded at 320 kbps with 48 kHz sampling frequency, I get a terrible distortion when play on WMP11 on my MAudio Mobile Pre USB audio interface. When the MP3 is playing in WMP11 by the internal sound card and built-in Laptop speakers, that the sound is not distorted, except that he is from small tinny speakers. If you think that the Pre Mobile is the culprit, but...
I have the latest driver for MAudio and Mobile meadow has been installed correctly, I can play MP3s that are 320 kbps with sampling frequency of 44.1 KHz without problems through the external audio interface.
In addition, iTunes plays the same 320 kbps, 48 KHz MP3, out through the pre Mobile and they play very well, no distortion at all (?)
I've uninstalled and reinstalled WMP11 without success, downloaded codecs updated, tried to disable the throttling of the CPU and various other things with no results.
I look forward to use iTunes, because it is so slow, I'd like WMP11 to work with these 48 kHz mp3s and I have a bunch of them, so I really want to convert them to 44.1 Khz. Not only that, the deformation occurs also with a lot of video files (AVI), where I think the sound is coded in 48 kHz.
Anyone have any ideas?
Thanks Dennyinredding, that seemed to work and it is not SLOW as iTunes, thanks for the suggestion!
-
Audio Dell by MAXX does not work with external soun card
Hi, I use my Dell Inspiron 15 7537 with Win 8.1
I plug in external audio interface / sound card Focusrite Scarlett 2i4.
I installed the drivers and all the inputs/outputs work fine when they are defined in the Windows Audio Manager.
But in the application Dell Audio (supplied with Windows), I can not change any settings, Sound does not change. (Looks like the settings to change the internal souncard output, but not outside :()
I love this app Audio Dell with EQ etc. But can I use it with my external USB sound card?Thank you!
David of the Czech rep.DuvikBut can I use it with my external USB sound card?Hello David. The answer is no. WavesMaxx is a software that is supplied with the audio driver from Realtek and works only with the Realtek audio hardware on the motherboard.
-
Upgrade to Windows 10 and now Usb 2.0 transfer is does not work with 10 Workstation
I have post professional and vmware 64 bit windows 10 10.
Whenever I try to spend my usb 2.0 storage device attached to a usb 2.0 controller that uses microsoft drivers, I get one? brand icon located next to the device in Device Manager asking the USB storage device name. The storage device works fine on windows, it is not call himself a vmware device when I try to connect it to my virtual machines which then tells me it could not connect to this device.
I did an installation of repair 3 times already and it has not solved the problem. Is there anything else I can do to get this working?
Digipeng
If your Windows 10 is recently upgraded to WIndows 7/8? If Yes, then you must completely Workstation to uninstall and reinstall the workstation. We have seen USB problems after upgrade from Windows 7 to Windows 10. And a complete uninstall/reinstall should solve the problem. Please let me know if it works for you. Thank you!
-
I just bought a new HP PC with Intel E5300 without experiencing compatibility issues with several current VPN as well as blocking drivers not signed properly. I heard of the Virtual PC as well as the ability to install Vista 32. What is the simplest, lowest cost way to make this existing work of PC with VPN and unsigned drivers as soon as POSSIBLE with performance at least equivalent to a Pentium 4 2 GHz with 2 GB of RAM?
http://support.Microsoft.com/default.aspx/KB/946765
Read the above info on drivers.
The driver signing Unsigned drivers can be used with 32-bit versions of Windows Vista. 64 bit versions of Windows Vista require that all device drivers be digitally signed by the developer. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Virtual PC 2007
Download the full version of Microsoft Virtual PC 2007.
Buy and install a Windows operating system earlier (XP, Windows 2000) in the above Virtual Machine and try to run your program in that.
Vista Home Premium is not supported by Microsoft using Virtual PC above, but Virtual PC will work in it.See you soon. Mick Murphy - Microsoft partner
-
I am running Win XP Pro latest version with SP3. I have the latest update available for ACR (5.7xx). I need to open the A7R Sony and Nikon D800E RAW files with what I have. Where can I find the good... best DNG Converter for the two test devices... so I can continue to use CS4... for now?
I know that the simplest solution is to subscribe to CC, but as I'm about to Win 10 in the next few months... I need to unsnarl this mess first. Meanwhile, I need to work with files D800E and A7R from Sony
Hi cmatter
You the best option is to switch to Windows 08/07/10
In the meantime you can use the 8.3 DNG Converter
Download link:- Adobe - Adobe Camera Raw and DNG Converter: for Windows: Adobe DNG Converter 8.3
Concerning
Assani
-
What is the best format of proxy to use when you work with S - Log in a linear colourspace?
I worked with a few images from Sony F55 shot against a green screen. I work in a 16 bit s - rbg colourspace
I did out of the source proxies that were photo-jpeg SBDAs, nice fast n.
However, it is fixed the color values in the proxy with what looks like an s-curve that did eventually my overlay significantly different parameters (IE much more contrasted) when switching between the proxy and original.
So, what would be the best way to go on the conversion of some sequences of newspapers-s to a fast proxy format without messing with settings main effects by such an amount of annoying. I can live with a small difference of course.
Thanks in advance.
Since you are seized, I work with the original film, not proxies and just deal with the problems of time.
You will not get a precise key with a proxy... which is what you need. Or you COULD work quickly and with no more worries with a proxy and get an incorrect key, but I doubt that is your goal.
-
The help of scripting language or CS SDK to work with DPS
Hello
I was wondering if there is a way to access the creator of overlay by script (or even better, the folio producer) via some sort of API...
In other words, is it possible to write code (I'm currently working with CS SDK and extension builder into flash builder to create extensions for CS5.5) who can set the video properties (in the overlay creator) an image, video or even automatically set assets of photo for a slide show.
And if I want to generate a .folio, can I do that using a script?
Question is not how, but if it is possible at all, for now.
If not, is there any plan to add support for script of dps in the future?
Thank you for your attention.
Lionel
For what is the creator of overlay: it is possible to generate overlay not creative scripts, but overlays.
See http://forums.adobe.com/message/3847828 (response by Eli.Shklovsky)
In short, the properties of overlay objects are stored as KEY-VALUE labels, so you can use
Creator in decorative insertLabel() set/edit panel and simulation.
The list of properties can be found by exporting overlay as an extract and by examining the XML file
Kind regards
Alexey
Maybe you are looking for
-
A text on a pane dropdown chops off the coast of the last sentence. Compatibility?
A web site has several components, each with a picture and a small amount of text. The last line of text on one of these components is illegible, largely because it is covered by a button that links to other pages. I see that of just on the top of th
-
I don't have the option open as a verified sidebar, never have, and NEVER had it do this til today. I can't get rid of him open like a sidebar when I open ff. Help, please. There must be another way to get rid of it before you restore my pc!
-
I have an old ID since (MobileME). After iclould that I started to get emails made to any other @icloud as my primary @ME seems to be very well! In addition, a few days ago, I get frequently log on questions as if another user changes the password an
-
Toshiba NB500-108 - FN key stopped working
Hello My FN key doesn't work anymore.I got a message when you use CCleaner to tell that the file c:/programfiles/Toshiba/Utilities/KeNotify.exe is missing (as well as HKLM/software/Microsoft/Windows/CurrentVersion/SharedDlls). How to solve this probl
-
The PXI - 6259 sampling rate M SERIES DAQ
Good afternoon friends, I'm reading my series M manual trying to find AO maximum sampling rate I can run my PXI-6259 to. I need to generate four-channel (A0:3) grid output wave high fidelity. Higher sampling frequencies enable higher frequency in