The sound of some mp3 saturated in WMP11 when read by interface usb audio, but they play fine in iTunes

Help, going crazy here!

With MP3 encoded at 320 kbps with 48 kHz sampling frequency, I get a terrible distortion when play on WMP11 on my MAudio Mobile Pre USB audio interface. When the MP3 is playing in WMP11 by the internal sound card and built-in Laptop speakers, that the sound is not distorted, except that he is from small tinny speakers. If you think that the Pre Mobile is the culprit, but...

I have the latest driver for MAudio and Mobile meadow has been installed correctly, I can play MP3s that are 320 kbps with sampling frequency of 44.1 KHz without problems through the external audio interface.

In addition, iTunes plays the same 320 kbps, 48 KHz MP3, out through the pre Mobile and they play very well, no distortion at all (?)

I've uninstalled and reinstalled WMP11 without success, downloaded codecs updated, tried to disable the throttling of the CPU and various other things with no results.

I look forward to use iTunes, because it is so slow, I'd like WMP11 to work with these 48 kHz mp3s and I have a bunch of them, so I really want to convert them to 44.1 Khz. Not only that, the deformation occurs also with a lot of video files (AVI), where I think the sound is coded in 48 kHz.

Anyone have any ideas?

Thanks Dennyinredding, that seemed to work and it is not SLOW as iTunes, thanks for the suggestion!

Tags: Windows

Similar Questions

  • Windows Movie Maker does sound on certain songs (MP3), but they play fine in Media Player. I created a movie in movie maker.

    Windows Movie Maker does sound on certain songs (MP3), but they play fine in Media Player.  I created a movie in movie maker.  Imported (MP3) songs bought online.  Play all songs on Windows Media Player, but once imported into movie maker, only some play.  I adjusted the volume on every song with no positive results.  Please help :)

    Windows Movie Maker does sound on certain songs (MP3), but they play fine in Media Player.  I created a movie in movie maker.  Imported (MP3) songs bought online.  Play all songs on Windows Media Player, but once imported into movie maker, only some play.  I adjusted the volume on every song with no positive results.  Please help :)

    ====================================
    Just because a media file plays in Windows Media Player
    does not ensure that it is compatible with Movie Maker.

    In fact... Movie Maker has problems with MP3 files... better
    bet would be to convert the files to the .wma format before
    import into Movie Maker.

    The following freeware program can perform the conversion:

    (FWIW... it's always a good idea to create a system)
    Restore point before installing software or updates)

    Format Factory
    http://www.pcfreetime.com/
    (FWIW... you can uncheck
    all the boxes on the last screen)

    After downloading and installing Format Factory...
    Open the program and choose an output folder...
    (this is where you will find your files when they are
    converted)

    Drag and drop your clips of music on the main screen...

    Select "At?" / OK...
    (the? is the format of your choice)

    Click on... Beginning... in the toolbar...

    That should do it...

    Good luck...

    John Inzer - MS - MVP - digital media experience

  • My Photoshop CC crashed. I clicked on the iCloud icon on my desktop and tried to update my Bridge and Photoshop, but they both failed. I retried and it has not yet. How can I get my Photoshop CC and CC rear deck?  I am preparing for an exhibition.

    My Photoshop CC crashed. I clicked on the iCloud icon on my desktop and tried to update my Bridge and Photoshop, but they both failed. I retried and they have not yet.  Help please

    Please see:error download or update Adobe Creative Cloud applications

    Error: "unable to install". Creative cloud office

    Error code 2 or 50: failure updating Creative Cloud desktop application

    I hope this helps.

    Concerning

    Megha Rawat

  • Why the sound doesn't work on my computer when it shows 100%?

    Currently, the sound does not work on my computer. He did it on 3 times in recent weeks. It did not last more than a day before it starts to work again. He's now over 2 days. I experienced this in the past & it was because he is somehow, control of the Cup itself. It is not cut now. It's showing 100%. Could there be something else I can try before taking it to a repair store?

    Thank you

    [Moved from comments]

    Currently, the sound does not work on my computer. He did it on 3 times in recent weeks. It did not last more than a day before it starts to work again. He's now over 2 days. I experienced this in the past & it was because he is somehow, control of the Cup itself. It is not cut now. It's showing 100%. Could there be something else I can try before taking it to a repair store?

    Thank you

    [Moved from comments]

    Reinstall the sound card driver.
    Visit the manufacturer's Web site to download and install the latest audio driver sound card.

    More help: -.
    No sound in Windows

  • can someone tell me why the sound becomes distorted on my external speakers when I plug the charger on my netbook?

    I have a set of logitech speakers and a subwoofer that I use on my netbook, but when I plug the charger to recharge the battery, the sound distorts seriously which means I can listen only as long as the battery, I sent l; ogitech but they said it was a problem on my computer. Anyone have any ideas why?

    Hi gaz2558,

    ·         Have you made changes on the computer before this problem?

    Follow the steps in the article.

    http://support.Microsoft.com/kb/813498

    Also update the latest audio drivers.

    http://support.Microsoft.com/kb/166774

    Reference: http://support.microsoft.com/kb/307918/en-gb

  • When I launch internet that I received the video picture but the sound is missing.how can I hear when I run internet & you see the tube or google.

    I use Windows xp. I get sound in vlc media player, winap etc.but when I use internet, I get the picture of a song or video but the sound is absent from the song or video.how can I listen to sound when I use internet.

    Hi Kamleshlalchandani,

    Welcome to the community Microsoft and thanks for posting the question.

    According to the description, it looks that you are unable to hear the sound of Internet Explorer.

    He would be grateful if you can answer this question in order to help you further.

    1. what version of IE are you using?

    2 have you made changes on the computer before this problem?

    I would suggest trying the following methods and check if it helps.

    Method 1:

    I suggest you to play sounds in Web pages and check if it helps.

    a. close all the open Internet Explorer window.

    b. open Internet Explorer. Go to tools, Internet Options.

    c. switch to the tab 'Advanced '.

    d. scroll down to the 'Multimédia' heading

    e. make sure that "Play sounds in web pages" is checked. Click on 'ok '. Restart Internet Explorer. A test to see if the sound will now play.

    Method 2:

    It is possible that Internet Explorer has been selectively mute in the Volume mixer.

    To check this:

    (a) open Internet Explorer, preferably to a page that needs to play sounds.

    (b) click on the volume icon in the windows system tray (in the lower right corner of the taskbar) and then click on the link titled "Mixer".

    (c) a panel will open showing the levels of individual volume of applications running that play sounds (you may need to scroll right to see all of them).

    (d) ensure that the level of volume belonging to Internet Explorer is not set to mute.

    Method 3:

    Since most of the online videos require the Java or Adobe flash runtime library to work, I advise you to install the Java runtime library on Internet Explorer and Adobe Flash Player.

    (a) update of Flash player and Java Flash:
    I recommend you update Adobe flash player from the website below:
    http://get.Adobe.com/flashplayer/

    (b) also download and install the Java Runtime Library from the link below:
    https://www.Java.com/en/

    Method 4: If the problem persists then try to optimize the internet Explorer by following the steps mentioned in this link.

    How to optimize Internet Explorer:

    http://support.Microsoft.com/kb/936213

    Important: Reset Internet Explorer to its default configuration. This step will disable also any add-ons, plug-ins or toolbars that are installed. Although this solution is fast, it also means that, if you want to use one of these modules in the future, they must be reinstalled.

    If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

  • I noticed that some jpeg (RGB) images are not display in Internet Explorer 11, but they present very well in other browsers. In addition, the images used to display properly in Internet Explorer. No idea what is happening?

    I noticed that some jpeg images are not display in Internet Explorer 11, but they display well in other browsers. I checked they are RGB images, because apparently some people accidentally use the CMYK format. IE is configured to display the images - I checked that also. The images used to display properly in Internet Explorer, and the images have not been changed on the server. The content was created using Dreamweaver CS6 and Photoshop CS6.

    I tried to view the page on other computers running IE, and they also have this problem.

    Any idea of what could be causing this to happen?

    Thanks for looking in this people!

    I discovered that prevented a few images to display in IE 11, while other images show. The culprit was Adblock Plus for Internet Explorer. Once, I disabled the software Adblock Plus missing images showed once again. Interestingly, I discovered that I could cause the same effect in other browsers using Adblock software. There is either a bug in the software of Adblock, or fluid network of Adobe system, which caused some legitimate images should be blocked. Whatever it is, they do not play well together right now. All images are stored on the same domain, and none of them related off site, so it's pretty weird that they have been blocked...

    Anyway, the mystery is solved! I know people like to see a conclusion to these things as much as possible, so I'll mark this as resolved issue.

  • The interface usb audio of Behringer U-Phoria UMC404HD work with Garageband?

    I just got an interface USB 4 channels for recording guitars and microphones. It has no driver, but instead uses the Mac OS. I implemented the sound control panel to recognize the device input and output, can I use the Audio configuration utility and MIDI to fit a recording at 192000HZ.

    My problem is that as soon as I open GarageBand 192000HZ setting falls down to it is more low 44100 HZ. It is a flaw with the audio interface Behringer or is it a problem of system software?

    I will mix Behringer messages on this problem, a guy says that the interface has a bad component castigates other Garageband.

    I would appreciate hearing from anyone with any interface from Behringer, who used it to 192000HZ using Garageband.  Any other comments welcome.

    I have this problem on 3 different computers using systems to a new installation of 10.11 10.6.8. A few different USB cables. More recently, on an I7 Mini with memory 16 concerts with 10.11.6. Currently on Garageband 10, but the same problem with Garageband 6

    I talked to an Apple technician and the answer is that Apple has "capped" sampling in 441000HZ setting.

    Thus, in spite of the box is designed to accept 192000Hz sampling, apparently GarageBand has been paralyzed for a lower sampling only to the adjustment system. Another program audio I, Amadeus Pro, has no difficulty with the parameter to 192000.

    TSK, tsk Apple...

  • Cannot change the properties of some mp3 files.

    I right click on a file and go to properties, then detalis everything is empty beside the property tab and I can't enter anything in value, and read-only is unchecked.

    Are you sure these are MP3 files and not another type, such as WAV? Please verify this by checking the file type in the file properties- general tab.

    Have you tried to reboot the PC? If you start Windows in clean boot mode, can change you the fields then?

    Also, please check if you can still edit the tags of the files with an editor of tags like Mp3tag owners.

    Tim Baets
    http://www.BM-productions.TK

  • WMP 11 - MP3 / songs torn broken towards the top/cracking last 10-15 seconds, but CD plays fine

    WMP 11.0.6002.19378 OS Windows Vista Ultimate 32-bit SP2 - 4 GB of RAM

    When I rip music from a CD 10-15 seconds of each song breaks and crunches but play on the same had ' drive it is. MP3, download files also have the same number.

    I have spent with the disks, the D and E and updated their. I did a SFC scan and nothing was found. I noticed that I'm not the only one who has experienced this problem.

    I am connected with the reception of the answer but their controls failed and they wanted me to pay $99 - $149 to run a tool to solve this problem, without any guarantee, so did not take their offer.

    Can someone tell me please how to fix this?

    Please check with the manufacturer of your sound card for an updated driver, windows update may not always be up-to-date.

    If after this, it is not one and you do not want to try the system restore I suggest you do as you say and you get a different media player. Keep in mind, future changes to the system can have an effect on any software that you decide to use. I don't know any other media player will work around the question of the rights of your purchased music. Have you checked on puretracks forum to see what others do / use?

    I wouldn't by any software, you can get several very free vouchers, iTunes, classic media player, VLC is very good.

  • my pc does not recognize my iphone when plugged in with usb finds but itunes there immediately .__i talked to the representative of apple service and the phone works very well. Looks like that I miss here some driver files.

    basically I can't transfer files from iphone to pc as I used to. in my computer, there is no usb device when connected pc cannot see my iphone. I plugged the flash drive and it pops up immediately to usb works fine as well
    I checked pc system information/components/problem devices and said apple iphone usb/vid_05AC & PID_1294 & MI_00\0 error, this unit is impossible and I don't know how to activate. I can't files sessions previous too coz I accidentally delete important files with unwanted stuff. Help, please

    so after waiting more than a week for a serious response I discovered firsthand how to activate the iphone to your pc. If you connect your iphone to your pc then right click on my computer / device manager/imaging devices/troubleshooting find impossible iphone and then click Activate and you good to go. seriously so guyz I can do then any other amateur can do too. Is what kind of forum this? a fan forum where nobody knows anything and everyone hope to help? Laughing out loud. seriously, google gives you more answers from this forum. IM outta hea.

  • Media Player does not play the video, only the sound that's a .avi format and when downloaded on fb it played entirely

    the media player does not show the video noise.  Same thing in the power point presentation, I tried to download.  The video plays correctly uploaded on facebook

    It happens with all videos?

    You can download and install ffdhow and check again the question: -.

    http://sourceforge.NET/projects/ffdshow/

    or, you can try VLC Player: -.

    http://www.videolan.org/VLC/

  • play sounds temporary and file of your choice when reading data with VISA functions?

    Hello.

    I read the function of reading data with VISA and then I use as multiple functions to display data on the graph. everything is OK.

    now, I want to play a sound specified (like a song in my desired folder 3s) signal which cross above the specified value range. then after the desired time, it will wait still new cross above the specified value and this repetition of the procedure until I stop the program.

    Data MCU is from and it does not stop when his game system and what system of incoming data for this part (his play) will ignore them pending that outdated.

    I use this for reading data and part VI mentioned which belongs to her is empty and I don't know what I have to do?

    altougth I use an another while loop for his apartment because I want to save time CPU.

    Thank you.

    I recommend you do the data type of the notifier a cluster that contains a path and a numeric (double).  The path indicates the reader what file to play.  Digital is the duration.

    Now in a way a bit complicated, but really good stop your second loop.  Do not use a second notification.  Instead, send the normal notification but not use a path for the path in the cluster.  Your second loop can write a check for the path of a not and stops when that is received.

  • How to set the pressure necessary for the keys on the keyboard? I adjusted it 2 years when I had my Macbook Air, but I forgot how I did it. In my opinion, only a touch of F has been used.

    How to address the need to pressure for keys? I've adjusted it 2 years ago when I got my Macbook, but I forgot how. In my opinion, only a touch of F has been used.

    I don't know what you are referring. You can't 'adjust the need to pressure for the keys. The keyboard is what it is. The key must be pressed far enough for electric contact in key switches. The keys are not adjustable in this way.

  • some of my files from registry read like a dirty mag but I've never been on one * site. Why is this? I have a virus?

    XP pro operating system

    Extreme security ZA anti-virus/spyware

    examples of what I mean... HKEY_USERS\S-1-5-19\Software\Microsoft\Windows\CurrentVersion\Internet Settings\ZoneMap\Domains\ * deleted *.
    HKEY_USERS\. DEFAULT\Software\Microsoft\Windows\CurrentVersion\Internet Settings\ZoneMap\Domains\ * deleted *.

    There are dozens of them in the section "domain." It is extremely disturbing. The stars are full Homestake words are in the registry. They are certainly not here by design?

    ************************************

    OK, that's ridiculous. I can't use the "bad" words then, how can I explain my registry? How about if I give you a link to a screenshot of my registry with the caveat that certain folders in the registry have naughty names...

    http://i266.Photobucket.com/albums/ii273/Merskeen/huh1.gif

    http://i266.Photobucket.com/albums/ii273/Merskeen/huh2.gif

    I really want to know what it is.

    . Hi thanks for your response. Someone told me this link, and it seems to explain everything. http://www.spywareinfoforum.com/index.php?/topic/3659-Internet-settingszonemapdomains-* / this set my mind at rest. Thanks for the link scanner, its very convenient. Kind regards

Maybe you are looking for