The IOM mass loading triggers "user charge" instead of "management role.

Similar Questions

• Problem in the registry, error loading C:\Users\[User Name]\AppData\Roaming\llytsw.dll Editor

  Hello

  Whenever I start windows, the RUN DLL message box appears and says "C:\Users\[user name]\AppData\Roaming\llytsw.dll the specified module could not be found.

  I scanned the system with Autoruns v10.07 and found these details.
  The AutoRun entry: oiheappm
  Image path: file not found: C:\Users\Sivarajan\AppData\Roaming\llytsw.dll

  In the registry editor, found these details
  Computer\HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Run
  Name: oiheappm
  Type: REG_SZ
  Data: rundll32.exe "C:\Users\Sivarajan\AppData\Roaming\llytsw.dll", aynbjt

  System details:
  Operating system: Windows Vista Home Premium 32-bit with Service Pack 2 installed
  Model: HP Pavilion dv6330ea Entertainment Notebook PC
  Processor: Intel Core Duo T2350 @1 CPU. 86 GHz 1.87 GHz
  (Vivid RAM) memory: 2.00 GB

  What can I do to remove this pop up when I started windows?

  I really appreciate the help as soon as possible.

  If possible, please explain why this pop up doesn't have to run, what it does, etc.

  Thank you
  Bye,.
  Siva

  The file is not on your system. There is only a registry entry that is refencing a nonexistent file. That's why you get the message.

  If you disable the entry in Autoruns, Autoruns moves the registry entry to another location so that it is not used during Windows startup.

  If you want to permanently delete the registry entry, right-click in Autoruns and click on delete. Or you can remove the entry from the registry using Regedit.

• Access to the reports of the IOM to NON ADMIN user

  Hi all
  
  I need to give access to reports a user NO ADMIN SYSTEM.
  
  I have created a group for him and gave access to the required in the reports menu items.
  
  When I run the report as long as administrator, I could see the results, but when I run the other user I'm not.
  
  I should give her other permissions.
  
  Thank you
  M

  I'll start from scratch:

  Group of users and give the menu as operational reports and historical reports of this group.

  Click on manage Group > select your group and select authorized reports.

  Select all the reports that you want to grant to this group of users.

  Now according to reports you can give other access to this group.

  As there is a report group membership. For this you need additional permission of the organization. I mean that you will make this group as group of Directors of that organization for which you want to give access.

  Member of this group can view all users but will not be able to change any user profile.

  Just to add one more thing:
  If you want to change any existing code without having to change any JSP, just go to the Table of REP and select your report. You will see a column he REP_META_DATA something, just modify this column.

  Clickable search = 'true' just do it 'false. '

  COMMIT;

  You are finished. User will see not any hyperlink here.

  Published by: Rajiv Dewan

• Everytime I try to log in my original admin. Account, it is said that it does not find the profile, then product to load a temporary profile instead, one without personal settings or memory.

  Everytime I try to log in my original admin. Account, it is said that it does not find the profile, then product to load a temporary profile instead, one without personal settings or memory. What is that?... and how can I solve this problem?

  Hello

  These methods should help for Windows 7 or Vista.

  References to Vista also apply to Windows 7.

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. THE ADMIN
  Safe Mode account has no default password (so unless someone changed
  the password should be available).

  Some programs such as the Google Updater (if you've added the Google toolbar,
  Chrome or Google Earth) has been known to cause this problem.

  Error message when you log on to a Windows Vista-based or Windows 7
  computer by using a temporary profile: "the user profile Service has no logon.

  Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  Difficulty "the user profile Service has no logon. User profile cannot be loaded. "Error in Windows 7
  http://www.SevenForums.com/tutorials/186131-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "the user profile Service has no logon. Could not load user profile. "in Vista & Windows 7.
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have visited
  logged on with a temporary profile. "in Vista & Windows 7.
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  ----------------------------------------------------------------------------------------------------------

  For Windows 7:

  How to enable or disable the built-in Windows 7 Administrator account
  http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.html

  Use the hidden administrator account to lower your user account APPLY / OK then
  Raise it to ADMIN. This allows clear of corruption. Do the same for other accounts
  If necessary after following the above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with
  your password even (or two with the same password) use a test or difficulty to another.

  You can run the command Admin account hidden from the command prompt
  from there if necessary.

  How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  ----------------------------------------------------------------------------------------------------------

  For Vista:
  
  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the hidden administrator account to lower your user account APPLY / OK then
  Raise it to ADMIN. This allows clear of corruption. Do the same for other accounts
  If necessary after following the above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with
  your password even (or two with the same password) use a test or difficulty to another.

  You can run the command Admin account hidden from the command prompt
  from there if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  What are the system recovery options in Windows Vista?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  How to create a Vista - free methods recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ---------------------------------------------------------------------------------------------------------

  If you can't access your old account you can still use an Admin to migrate to one
  new (remember to always leave an account Admin who is not used except)
  to test and difficulty).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• allow the loading of windows 7 instead of cs4 adobe cs6

  allow the loading of windows 7 instead of cs4 adobe cs6

  What exactly is the question?

  And to make sure: this is a user to User Forum, so you are not really addressing Adobe here, even if some employees of Adobe fortunately declined.

  System requirements | Photoshop

• My iPhone is not charging I I think that the port of loading must be cleaned, do I go to an apple store and it cost something to them to clean?

  My iPhone is not charging I I think that the port of loading must be cleaned, do I go to an apple store and it cost something to them to clean?

  They diagnose what's wrong with it.
  If it requires no parts, he (should ' t) costs nothing.

• Were there an update recently that could trigger my computer load his new user profile instead of my own profile at startup?

  I get the grey Dell Inspiron screen at startup instead of my profile, and all my display settings and startup programs disappeared. This corrects sometimes when I restart and sometimes I get the grey screen again. This morning (after downloading some updates last night), I got a blue screen Uni with my own icons, but all my parameters display including my image of the office had been reset. I did a system restore once before and that fixes the problem, but the problem started again with the gray Inspiron screen yesterday.

  We have not seen messages indicating that the recent updates are causing problems to user profile, rarely if ever I heard of updates causing corruption of the user profiles.

  Common causes of corruption of the repeated profiles:

  1. bad or, failing hard drive, no spare parts no sectors left.  Run chkdsk on the drive.  Get a diagnostic utility of disk from the web site of the manufacturer of the disc and check the disc.

  2 - bad RAM, run a memory diagnostic test.

  3 - viruses and other such parasites.

  4 applications - bad or ill-conceived.

  5-bad or incomplete discharge of the user, ususally caused by #4 hive.  Something is trying to write to the user hive or maintain the registry handles open when the computer is currently stopped.  Install the Microsoft user profile Hive Cleanup service

  John

• Error: "error loading C:\Users\K***\cnmss"the specified module is not found.

  Original title: RunDLL
  I get "error loading C:\Users\K***\cnmss".

  The specified module could not be found

  What should I do to make it better?

  Hello
   
  
  1. when exactly you get this error message?
  2 have you made any changes to the computer before the show?
  Step 1:
  
  Check if the problem persists in safe mode.
  Reference:
  Start your computer in safe mode:
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
  Step 2:
  Try to perform the clean boot and check if it helps, here is the link:
  http://support.Microsoft.com/kb/929135
  Note: When you're done to diagnose, follow step 7 in the article to start on normal startup.

• system starts with the following error: runDLL - error loading C:\Users\Hav\AppData\Local\Temp\hnszs0.exe

  Original title: runDLL Error Message

  When I start the computer I have an error: runDLL - error loading C:\Users\Hav\AppData\Local\Temp\hnszs0.exe - the specified module could not be found.  How can I fix it?

  Hello

  1. don't you make changes to the computer until the problem occurred?

  I suggest you to try the steps below and check if it helps.

   

  Method 1: Try to start your system in safe mode and check if the same problem occurs.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

   

  Method 2 : If the question does not exist in Mode safe mode then try to put your computer in a clean boot state.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

   

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  In addition, please see the link below with a similar problem reported.

  Help with RunDLL error on startup

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/help-with-RUNDLL-error-on-startup/e929b39c-55d1-4EA4-A5A0-b38733286d84

  Hope this information is useful.

• How can I fix this error?-"Error loading C:\Users\Owner\AppData\Local\ufohudusiboqudo.dll" the specified module could not be found

  How can I fix this error?-"Error loading C:\Users\Owner\AppData\Local\ufohudusiboqudo.dll" the specified module could not be found

  Hello

  Google has no informatrion on this (ufohudusiboqudo.dll), so it's probably the Malware that your Antivirus has deleted, but who left a start for her entry.

  Download, install, update and scan with the version FREE of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  If the error persists after scanning, use this FREE program to delete startup entries:

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more. Autoruns goes way beyond the MSConfig utility bundled with Windows Me and XP

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  See you soon.

• In Vista, get a DLL error on reboot, 'error loading C:\Users\...\AppData\Local\odokiwikisoxe.dll. The specified module could not be found.

  On reboot, I get a RunDLL message "error loading C:\Users\...\AppData\Local\odokiwikisoxe.dll.  The specified module could not be found.  How can I fix?

  Hi MelP1802,

  ·         How long have you been faced with this problem?

  ·         You did it last changes before the show?

  Follow the mention of steps in the Microsoft article and lets us know if the question get it fixed.

  Method 1: I suggest you perform the clean boot and check.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: Try the SFC scan on the computer.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

   

  http://support.Microsoft.com/kb/929833

  Method 3: Also I suggest you analyze your computer Microsoft Safety Scanner, it will help us to get rid of viruses, spyware and other malware

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Hope this information helps.

• Can not connect - when entering a password message "the service user profile service has no logon. Failed to load profile \User' cannot access start menu to apply the options.

  Can not connect - when entering a password message "the service user profile service has no logon. Failed to load profile \User' cannot access start menu to apply the options.

  Hello

  1st thing to try is the system in safe mode restore to before the problem

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not solve it read more

  read the tutorial below

  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:

  The user profile Service has not logon. User profile cannot be loaded.

  http://support.Microsoft.com/kb/947215#letmefixit

  Your user profile was not loaded correctly! You have been logged on with a temporary profile.

  http://support.Microsoft.com/kb/947242

  If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• Error message: "error loading C:\Users\Sue\AppData\Local\WMPDBDL.dll the specified module is not found."

  I have an error message box that always appears at the start of my computer.  It says: "Error loading C:\Users\Sue\AppData\Local\WMPDBDL.dll the specified module is not found." I have a Dell Laptop Inspiron 1720 running Vista. I just 'X' it out and continue on but would like to get rid of it.  I don't know that it's touched something that needs correction.  Thank you

  Hello

  Google who provides virtually no information that suggests it might be the malicious program or a start remains for her entry search

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If the error persists after scanning use this program to out startup

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more.

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

• When I start my laptop (running vista 32-bit) upward and the connection, get this error message "error loading c:\users\Appdata\Local\Temp\sshnas.dll".

  When I start my laptop (running vista 32-bit) upward and the connection, get this error message "error loading c:\users\Appdata\Local\Temp\sshnas.dll".

  Hello

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• On startup, I get two error messages. Error loading C:\users\Jack\appdata\lcal\dmptexys.dll the specified module could not be found

  On startup, I get two error messages. Error loading C:\users\Jack\appdata\lcal\dmptexys.dll the specified module could not be found

  This could be caused by malicious software. Your antivirus may have removed part of it or prevent it install completely.

  Run a full scan with your antivirus, download and run Malwarebytes Anti-Malware freehttp://malwarebytes.org/

  To prevent the display of a message run Autoruns http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx . You can look up the references to the file and disable the entries.