The limit to the number of columns to display in the report. Help!

Similar Questions

• Max Number of columns allowed in Discoverer 9i / 10g report

  Hello
  
  I need to prepare a report of discoverer 9i which has 62 columns. Does anyone know how the Max number of columns is allowed in discoverer reports. I'll be able to include all of the 62 columns without any problem?
  
  Thanks advanced
  
  Lokesh.

  Hello
  Although I couldn't find any document about it, I don't think that you will have a problem with the discoverer.
  I don't know how the java it take good care.
  From the Viewer (and I hope I'm not mistaken and mislead you) in the definition of columns
  You can choose up to 999 columns to present so I guess that there will be no problem with 62.

• Need to limit the number of columns

  When a tab in the last cell of the row, I want the cursor to the next line down. Instead, it creates a new useless column. Can't seem to find a setting that allows me to limit the number of columns in a page - someone ' one knows how to do this?

  Thanks for your wisdom shared, Oh wise Ones.

  I'm not aware of do what you want.  You can post your comments directly to Apple using the menu item "numbers > provide Feedback numbers.

  You can still use the key combinations:

  < command > + < right arrow > to access at the end of a line

  < command > + < left arrow > to move to the beginning of a line

  < command > + < down > to pass at the end of a column

  < command > + < arrow > to move to the beginning of a column

• IR - CubeQuery - no limit to the maximum number of columns or lines?

  In IR query processing cube, is there a limit to the maximum number of columns or lines? If so, how?
  
  When downloading of the results, are there limits to the maximum. lol the columns or lines as well?
  
  All documentation on its limits?
  
  Please help someone?

  Columns cannot be more than 256 upto Hyperion Interactive Reporting Studio 9.2.

  No, there is no limit to the maximum number of rows. It depends on the memory and available space on your machine.

  Please correct me if I'm wrong.

  I hope this helps.

  Kind regards

  Manmohan Sharma

• editing a table to add the number of columns fails with ORA-01792

  I'm editing a table to add columns, and ORA-01792 receiver: maximum number of columns in a table or view is 1000. The table of the altar will be no more than 1000 columns. The environment is RHE5 Oracle 11.2. ALTER statement adds a lot of columns in the table, but when I do a manual change to add a dummy column it works, after that, if I run the original the change works!

  What is a table compressed with unused columns?

  This may explain the error with the limit of 1000.

• limiting number of column in the 4.1 apex data loader?

  Hi all!
  
  Is there a limit on the number of column in the APEX 4.1 data loading page?
  
  My DB object has 59 columns and they are all available in single colum drop of my load sample data table definition boxes.
  On page two of the wizard created database load pages "data/table mapping" columns only 45 is indicated. These columns are correctly inserted in my table. The last 14 columns are ignored.
  
  If anyone knows if there is a limitation and can it be extended?
  
  Thanks for any reply and cordially
  Kai

  No, I don't have a solution for this.

  Split the file within columns each, with the primary key that is repeated and then sting tables up to post upload could be easier than to use other roads.

  And then there's always the good old SQL Loader and external Tables. But the integration of these into the Apex is not easy because Apex runs on the server and the file is usually the disk of HARD local to the client.

  Kind regards

• Display the icon change the number of columns

  I'm sure it must be a way to change the number of columns in the display icon, not the space between columns, not the size of the icons, but the number of columns, for example, that dumpster has 4 columns and I want to see those hidden on the right I have to use the scroll bar, I want to do I want to see ONLY for columns of the filling finder window?

  Thank you very much

  Roger

  "BTW that seems to only happen when I consult with ANY ' arrange by" or "sort by"!

• I tried to view my tabs on other computers and received this message: XML Parsing Error: undefined entity location: on: sync-tabs line number 7, column 1: the window id = "tabs-display" ^ How can I fix?

  "Error message has been: XML Parsing Error: undefined entity location: on: sync-tabs line number 7, column 1: window (weeks =" "3 =" "4 =" "5 =" "7 =" "< =" "^ =" "a =" "Add - on. =" "it y =" ' am = "" a = "" and = "" are = "" avg = "" believe = "" time = "" but = "" impossible = "" some = "" computers = "" firefox = "" for = "" I = "" I = "" id = 'tabs-view' in = "" installed.. = "" it = "" months) = "" = "" on. "" "" "" "" = "" or = "" other = "" p = "" paid = "" remember = "" running = "" sometimes = "" sync = "" tabs = "" version = "" look a = "" was = "" we = "" some = "" when = "" windows = "" worked = "" > < / window > "

  Hello!

  Can you give us some details? When this message display? Is in your phone or your computer? What is your language? More information you can give us the best.

  You use the add-on and Firefox 4? If so, I'll ask you to disable and remove the add-on: Sync is now part of the Firefox browser and you don't need the add-on. [https://bugzilla.mozilla.org/show_bug.cgi?id=644894 some users solved this problem by uninstalling the add-on.]
  ]

• Impression of infinite number of columns in addition of Table to the report

  
  

  Using the VI "Append Table to declare", you cannot specify Center alignment, through if you enable the grid, it's easier to read tables.  If you generate an Excel report, you have more control and be able to specify the alignment of the cell.

  There is no way to get or to automatically print the page number in the Toolkit of report, using Standard report generation.  You can do this manually keep track of how many pages have been printed if your using the new report Page' VI.

  Using the VI script that you posted, I changed to illustrate adding selectively the columns on the report.  His practice is usually not standard for us to write code to customers, but this example seemed good for the Page example of Community (http://www.ni.com/code/) and with your permission, I would like to post here as well.

• How can I know the number of columns and lines on excel file

  How reading the number of columns and rows on an excel file after you open the file in excel with ActiveX.

  Using the example of excel200dem, I read that the file data is excellent.

  However, in this example, I just give the number of lines and columns.

  I want to know the number of lines and columns not giving those in C code automatically.

  Who knows this things? -?

  Help me please.

  Hello

  (1) this forum provides a search option, you must use in doing so, you will find this post

  (2) don't solve you your earlier questions? If so, you must mark responses that have helped you find a solution.

• How to query the total number of columns and lines filled with data?

  How to get the number of rows and columns in Exel file data using Excel report?

  Since you have posted this question in the forum of LabWindows/CVI, I guess you want to know how to do with CVI.

  You need to know how to open and activate the Excel data file.

  Depending on the function returns the total number of columns and lines col_count row_count, respectively.

  -----------------------------------------------------------------------------------------------------------------------------------------

  int CountColumnsAndRows (void)
  {
  Error HRESULT = 0;
  CAObjHandle rangeCurrentRegionHandle = 0;
  CAObjHandle rangeColumnsHandle = 0;
  CAObjHandle rangeRowsHandle = 0;
    
  unsigned long col_count = 0, row_count = 0;
    
  Must use the 'A1' property and CruuentRegion count the total of columns and lines, including the drafts!
    
  error = CA_VariantSetCString (& MyCellRangeV, 'A1');
    
  error = Excel_WorksheetRange (ExcelWorksheetHandle, NULL, MyCellRangeV, CA_DEFAULT_VAL, & ExcelRangeHandle);
  If (error<0) goto="">
    
  error = Excel_GetProperty (ExcelRangeHandle, & ErrorInfo, Excel_RangeCurrentRegion, CAVT_OBJHANDLE, & rangeCurrentRegionHandle);
  If (error<0)  goto="" error="">
    
  error = Excel_GetProperty (rangeCurrentRegionHandle, & ErrorInfo, Excel_RangeColumns, CAVT_OBJHANDLE, & rangeColumnsHandle);
  If (error<0)  goto="" error="">
    
  error = Excel_GetProperty (rangeColumnsHandle, & ErrorInfo, Excel_RangeCount, CAVT_LONG, & col_count);
  If (error<0) goto="">
    
  error = Excel_GetProperty (rangeCurrentRegionHandle, & ErrorInfo, Excel_RangeRows, CAVT_OBJHANDLE, & rangeRowsHandle);
  If (error<0)  goto="" error="">
    
  error = Excel_GetProperty (rangeRowsHandle, & ErrorInfo, Excel_RangeCount, CAVT_LONG, & row_count);
  If (error<0) goto="">

  Error:

  CA_VariantClear (& MyCellRangeV);
  CA_VariantClear (& MyVariant);
  ClearObjHandle (& ExcelRangeHandle);
  ClearObjHandle (& rangeCurrentRegionHandle);
  ClearObjHandle (& rangeColumnsHandle);
  ClearObjHandle (& rangeRowsHandle);
    
   
  If (error<>
  ReportAppAutomationError (error);
    
  error return;
  }

• How can I know the number of columns in a TYPE?

  Hello

  If we have a guy like below

  type vc_arr2 is table of the varchar2 (32767) index directory.

  How can I get the number of columns?

  Minoo.TK wrote:

  Hello

  If we have a guy like below

  type vc_arr2 is table of the varchar2 (32767) index directory.

  How can I get the number of columns?

  It is a type of associative array definition. A table has no columns. It is a collection of elements (variables or values). An array location is usually called a cell.

  The standard method Count() exist in Oracle for all table types.

  As for the definition of the table, as in structures, variables make the table contain - associative array is defined in the PL/SQL code and does not exist in the layer of metadata to the database as a new user-defined type. For the definition, you must read the declaration of PL/SQL defining the table.

  Note that there is very rarely the need for associative tables in PL/SQL - 99% of the time they are used without any idea as to what as a table associative is also.

• Query the number of columns have data in a Collection

  Hello

  Apex 4.2.

  I use the EXCEL2COLLECTIONS plugin to import csv data into a collection.

  I am now validate the collection and would like to know the number of columns in the collection were given.

  For example, if my collection has less than 10 columns with data, then I want to generate an error

  Is there a way to do it

  Concerning

  Gus

  Gus C wrote:

  How and where is the best place to use this code.

  What type of validation

  You said:

  I am now validate the collection and would like to know the number of columns in the collection were given.

  and

  Otherwise, I should raise an error or enter an error indicator and the error message in columns 11 and 12

  So one could assume that aspect was already developed.

  The short answer is that without knowing the details of what you are trying to do, how your do it, and how you have reached: don't know.

  I expect this kind of import of data includes several pages forming a multi-step wizard, so there are a lot of possibilities. For example, use it in a cursor FOR loop to set the above error flag and message columns, then conditionally branch to a report with errors page if error indicators exist in the collection, or the next page of the wizard, if they are not.

• I need to convert PDF to Excel, however, the columns and tabs make many merged cells and the number of columns empty. In addition to not separate the columns properly, I see many not separate lines together in the same cell. I think same as Adobe Acrobat

  I need to convert PDF to Excel, however, the columns and tabs make many merged cells and the number of columns empty. In addition to not separate the columns properly, I see many not separate lines together in the same cell. I even think that Adobe Acrobat Pro DC has limits. There is no way to set what points in columns to force the column break? Or create several columns that are unnecessary? How column in Excel, size fixed when import us text and define where breaks have columns of text?

  Google Tradutor para empresas:Google para appsTradutor sitesGlobal market Finder traducao Toolkit

  Acts traducao Instantaneasobre o Google TradutorCelularComunidadePrivacidade e TermosAjudaEnviar comments

  PDF does not contain columns, lines, formats, styles or other aspects of word processing or spreadsheet file formats.

  This is because the PDF is decidedly not a file format of word processor or a spreadsheet or something 'like' one of these.

  (see ISO 32000 for what PDF "is")

  Which allows to optimize the export of the content of a page PDF is to start with that tag well formed PDF (ISO 14289-1, PDF/UA-1).

  Without that export is what it is and we performs the cleanup of any necessary content using the native application for the export of files (MS Word or Excel).

  Be well...

• How to export data to excel that has 2 tables with the same number of columns and the column names?

  Hi everyone, yet once landed upward with a problem.

  After trying many things to myself, finally decided to post here...

  I created a form in form builder 6i in which clicking on a button, the data gets exported to the excel sheet.

  It works very well with a single table. The problem now is that I cannot do the same with 2 tables.

  Because the tables have the same number of columns and the columns names.

  Here are the 2 tables with column names:

  Table-1 (MONTHLY_PART_1)	Table-2 (MONTHLY_PART_2)
  SL_NO	SL_NO
  MODEL	MODEL
  END_DATE	END_DATE
  U-1	U-1
  U-2	U-2
  U-4	U-4
  ..........	........
  ..........	........
  U-20	U-20
  U-25	U-25

  Given that the tables have the same column names, I get the following error :

  402 error at line 103, column 4

  required aliases in the SELECT list of the slider to avoid duplicate column names.

  So how to export data to excel that has 2 tables with the same number of columns and the column names?

  Should I paste the code? Should I publish this query in 'SQL and PL/SQL ' Forum?

  Help me with this please.

  Thank you.

  Wait a second... is this a kind of House of partitioning? Shouldn't it is a union of two tables instead a join?

  see you soon