The list of functions: how to remove similar values/strings in a list

Similar Questions

• Drag the control example and how to record a value of the indicator?

  Hello world

  I want to drag the Boolean buttons on my front panel in the time of execution, how can I do?

  I remember that I have seen an example or why, it's a map on the front panel, but I don't remember the name TT someone knows?

  and the second question is how to store a value of the indicator, like the first time, you set the value and close the vi and run it again, the value will remain unless you change in the second run time?

  Thanks in advance

  Thanks to you two, are there good examples of mouse followed the structure of the event available?

  and my second question is for example: read a file using the vi, I created the first, that the value of all the positions of the button on the front panel, and the 'get file vi extension' shows the name of the file on the front panel. then I close the vi and open it again, the button positions is always there where they are, but the file name string is empty.

  How can I save the filename so indicator when I opened that vi still once, if not the other position button file selection, the filename indicator still shows the previous name?

• How to remove empty values to items in the list?

  
  Hello

  There is an error that I couldn't fix it for a few hours.

  I try to remove the empty list to the "elements in the list"

  I want to just display value 2 "Yes and no" only in my list.

  However, when I click on the down, or press keyboard input, a new list will occur.

  Are there anyone know how to remove the empty list?

  Please help me.

  -Item type: list item

  -Generator for oracle development forms

  Thank you

  Hello

  Try the following combination of keys:

  CTRL + SHIFT +.

  Greetings,

  SIM

• Satellite A210 - 11 p point of freezing by using the FN + F5 key - how to remove the VAP

  Hello

  I had a problem with my A210 - 11 p gel when I use the f5 function key to switch between the LCD and the tv.
  I read other posts and people talk about updating the value Pack.

  I downloaded it but it tells me to uninstall the old version by using Add or remove from the control panel.
  But the added value pack is not listed here. I thought that I would try to remove the utility Flash Cards, but that did not help and I had to install the 64-bit driver to get them back because once they have been removed I couldn't use the function keys!

  Flash cards are back so the 64-bit driver seems to work, but I think I have a 32-bit of Windows Vista.

  The other reason that I was updating the value Pack is that when I go to the TV and LCD, flash cards are not displayed and I have to use the f5 function and it is when the computer crashes.

  So, how can I uninstall the old VAP?
  Where he's hiding?

  Someone eles suffer this?

  And how do I know if I use 32-bit or 64?
  Sorry for the string of questions

  Thank you

  Mickey

  Hello

  Perhaps I should clarify that;

  First and foremost your laptop must belong to the PSAELE series.
  If you are not sure, check the bottom of the unit.

  The VAP may be withdrawn from Vista in Control Panel-> programs & features

  On my laptop A210 the PPV could be found at the end of the list of installed programs.
  I could easily remove it. But note that I used the Vista 32 bit.

  The VAP for _Vista 64bit_ is not available!
  On the European disc of Toshiba, you will only find programs simple but * not full * VAP package!

  I think it's the reasons why you don t see the PPV and cannot be removed.

  concerning

• A symbol of blue lock on the display screen. How to remove?

  There is a blue lock in the middle of my screen symbol. It opens and closes every 15 seconds?

  Hello

  Dell monitor? See "OSD Lock" here. (The other monitors may have similar controls.)
  http://support.Dell.com/support/eDOCS/monitors/1901FP/en/controls.htm

  ---------------

  If necessary:

  One of startup programs is the culprit.

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Autoruns - free - see what programs are configured so that it starts automatically when
  your system boots and you connect. Autoruns also shows you the complete list of the registry
  and where applications can configure Auto-start for the files settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• In the Group Policy Editor, how to remove link purple (clicked)?

  In the Group Policy Editor, I clicked on the links. The links are 'policy setting' and 'properties' (as shown in the screenshots). The links turned purple after I clicked on them. It shows not only on the specific links I clicked on. It shows on all the links that have a 'properties' or link "policy setting. Before they were blue. Does anyone know how to restore them back to blue? I tried Group Policy link purple', "how to remove purple link in Group Policy" and expressions similar but have found no relevant results.

  

  Hello

  Please contact Microsoft Community.

  Unfortunately we do not have an option to change the color from purple to blue. Please see the link below for understanding the Group Policy Feature Set

  https://msdn.Microsoft.com/en-us/library/bb742376.aspx

  Hope this information is useful.

• How to remove a value from a textbox containing the javascript?

  Hello

  I have a form with several text boxes:

  TextBox1

  TextBox2

  SumTextbox

  format of all these areas has been set to 'Number' with two decimals (0.00)

  the SumTextbox should automatically calculate the sum of Textbox1 and Textbox2 > > This was done by setting properties in SumTextbox.

  The user can either:

  • Download the form and learn (Textbox1 , Textbox2) by the keyboard of the computer and then print the form > > > I have no problem here.

  or it may simply

  • Download the form, print and complete (Textbox1 , Textbox2) with hand writing > > > that's the problem. Because all the text boxes has the value (0.00).

  How can I use javascript to remove these values if the user decides to leave the empty text boxes and print the form directly?

  Thank you for helping

  You can add a custom for the calculated field validation script:

  // Custom Validate script for calculated field
  if (+event.value === 0) event.value = "";
  

• Obsolete devices in the AutoPlay list & several entries for the same devices II (how to remove Iphone in Autoplay device)

  I read the article "obsolete devices in the AutoPlay list & multiple entries for the same features" and did what they said on the registry change, but I can't seem to find what I'm looking for.

  I had an iphone and he sold on ebay, now in my autoplay menu, there is my iphone device listed in DEVICES. I would like to remove it, but there is no option to do this. I looked everywhere in the 'managers' and 'eventhandlers' regedit, but I can't find the name of my iphone or whatever it is about the iphone in particular. So I hope that someone could lead me in the right direction and it would be very appreciated. Is there a specific code or name for the iphone in regedit?

  Hi arande1a,

  I would like to know what article you're talking about, please give the link for the same.

  I suggest you try the following steps:

  Step 1: Disable Autorun

   

  (1) open AutoPlay by clicking the Start button, clicking Control Panel, on material and audio and then click AutoPlay.

  (2) turn off the AutoPlay use for all media and devices check box, and then click Save.

  Restart the computer and check.

  Turn on AutoPlay

   

  (1) open AutoPlay by clicking the Start button, clicking Control Panel, on material and audio and then click AutoPlay.

  (2) select the game to use automatic for all media and devices check box, and then click Save.

   

  http://Windows.Microsoft.com/en-us/Windows-Vista/Change-AutoPlay-settings

  Let us know if you find iPhone mentioned in the following registry key location.

   

  HKEY_LOCAL_MACHINE
  \CurrentVersion\Explorer\AutoplayHandlers\ device management

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows:

  http://support.Microsoft.com/kb/322756

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• OWB Mapping, how to remove similar or duplicate data?

  Dear all,

  I intend to create a mapping to move data from my data source. I have this kind of data

  Type of change in Date Employee_ID fpin fpout workhour

  29/08/2014 1234, 1 trip duty 08.00 17.00 8

  1234                              29/08/2014          1                                                            07.45          17.30          8.45

  This table has no primary key and the constraint. On the ETL process, the target is not a given with double Employee_ID, Date and shift as given above. When there is a data load only the data that has a value in the Type column. Therefore, only the first data loaded.

  I already use the deduplicator component to remove duplicate data, but it does not work in this case.

  No idea how to filter such data in OWB?

  Best regards

  Akhmad H Gumas

  Hello

  There are several options here:

  (1) use a grouping of the aggregation on Employee_ID operator (perhaps to the Date as well, since this seems to be your goal.)

  All other attributes could be using the min, max, first, last aggregate functions.

  But this way, it is difficult to get all the data in the first row (where the Type is filled)

  (2) use analytical functions to qualify each record in front of a filter for the first line only.

  This can be done using the sequence of operators like this:

  source_table-> Employee_ID expression-> filter

  Hereby, by using the following expression:

  INPUTGRP1 (employe_id, Type)

  OUTPUTGRP1 (DUPROWSEQ: row_number() over (partition of INGRP1.) Order of employe_id by INGRP1. TYPE DESC)

  The filter will be hav efollowing expression:

  INOUTGRP1. DUPROWSEQ = 1

  As an example of following seqq generated code:

  create table ttt (Employee_ID number, Date_w date, number of SHIFT, Type_w varchar2 (20), number, number, number of workhour fpout fpin);

  insert into values of ttt ("1234, sysdate, 1, ' travel duty ', 8.0, 17.0, 8);
  insert into values of ttt (1234, sysdate, 1 ", 7.45, 17.30, 8.45);

  commit;

  Select * from
  (
  Select row_number() over (partition by Employee_ID arrested by Type_w desc) DupRowSeq, ttt a a.*
  )
  where DupRowSeq = 1;

  Hope this will help you more.

  Bertram greetings

• I can't delete cookies with this version of foxfire. I see not the button Delete. How to remove cookies?

  I was always able to delete cookies in Firefox. With the latest version, I don't see a delete button or move the slider to display a button Delete. How to delete cookies without a button actually remove visible?

  How do you remove usually cookies? In the Firefox Cookies dialog box, there are two buttons at the bottom: all delete and delete the selection. If you're used to a button Delete, it could be that you used an add-on to delete cookies.

  You can access the dialog box Cookies for the current site using the Page Info dialog box. Either:

  • Right click and select View Page Info > Security > "View Cookies".
  • (menu bar) Tools > Page Info > Security > 'view the Cookies '.
  • Click on the globe or padlock icon in the address bar > additional information > "View Cookies".

  In the dialog that opens, the site current is automatically entered in the top search box, so you can delete cookies from the site individually. If you want to see all THE cookies, you can disable this dialog.

  Does it work?

• Professional XP on drive C & XP Home Edition on the D drive. How to remove C professionals?

  I got xp home edition preinstalled on my Zenith zbook pc, but for some reason, that it was not updated and later I removed it and installed xp professional but now I reinstalled xp home edition on drive d, computer laptop works fine and update but now I want to remove xp professional version of drive C. How can I do? Please help as soon as possible.

  Then just delete the files/folders in C. I'll repeat it here...

  Just delete all the C files on XP Home on D. Docs and settings, program files, windows and any other records that may exist.

  Do not delete all the files in the root of C! This is essential for Windows to start. They include ntldr and NTDETECT.COM, ini, boot.

• I have two folders in the same subdirectory with the same name. How to remove the extra folder?

  I have 2 directories "documents" located in the same directory. They are as well located in C:\Documents and Settings\ [user_name]------directory. Duplicate folder is automatically updated with the same file names when I add files in the original folder. It looks like a pointer to the original folder, when I try to delete the duplicate directory. I get the following error message.

  Can't delete My Documents: it is used by another person or program.
  Close all programs that might be using the file and try again.

  I deleted all files in the directory, rebooted the computer and attempted to delete the now empty folder and I get the same error message. Can you help me remove this duplicate folder.

  Note:
  ------

  I am not able to rename the duplicate folder... If I try to rename, the original folder is renamed... But not the duplicate. Also the duplicate folder becomes empty (since it runs a pointer to the original folder, when the double original of renowned gets is empty)

  Mager

  In Windows XP, all user folders were located under the C:\Documents and Settings folder.

  In Vista , all user folders are located under the folder C:\Users .

  Vista Documents and Settings folder is not a real file it's a junction folder that points to the Folder C:\Users.

  A junction is as a shortcut that points to another file, that is why these records have a shortcut (arrow) overlay icon. In Vista, the only reason why the Documents and Settings junction is for the old installers who are looking for a Documents and Settings folder. When they try to access the folder Documents and Settings, the junction in silence re - runs Setup to the C:\Users folder.

  The default permissions for the Documents and Settings junction is access denied, even for the administrators of .
  
  The only way that a user can access this file actually is if the access permissions have been changed.

  For a more detailed description of this topic and a list of all the junctions see the following Web site.

  Windows Vista Junction Points:
  http://www.Svrops.com/Svrops/articles/jpoints.htm

  I recommend that you move all your files and immediately stop using the Documents and Settings folder to avoid more problems.

  If this just started recently, I recommend that you use the system restore back to a point before the documents and settings folder was first access.

  Ronnie Vernon MVP

• I have a virus in the IE zoominto. How to remove or repair

  I received a message stating that I had a virus in the program zoominto IE file.  The Panda anti virus couldn't quarintine or eliminate it.  How can I fix this?

  Hello

   
  Where did you get the message?
   
   
  Method 1:
  
  ZoomInto IE is an add-on for Internet Explore. You can disable it and see if that helps.
  Follow the steps mentioned below:
  a. open Internet Explorer by clicking the Start button, and then click Internet Explorer.
  b. click on tools and then click on Manage Add-ons.
  c. under show, click all add-ons.
  d. click on the Zoom module in IE and then click on disable.
   
   
  Method 2:
  
  I suggest you make a system full scan just to be sure.
  Here is a link that will give you information on how to perform a full scan of the system:
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

• Link to FrameMaker 8 Robohelp generates umlaut in the names of files - how to remove?

  I'm linking German Framemaker files translated into Robohelp.

  The title 1 and title 2 areas in my source Framemaker files often contain accents in words/phrases.

  Unfortunately, when you bind to Robohelp 8, umlauts appear in the file namessection.

  And umlauts are not allowed characters in file names.

  How can I remove the umlauts and yet keep a building unique source for my Framemaker-Robohelp project?

  (To remove the source files would of course be tedious and return the incorrect words.)

  (To somehow deprive him of the file names would create many broken links).

  Our books are translated into several languages. I really need the appearance of the single source of Robohelp 8 chassis to work properly.

  Any process or procedure would be very appreciated!

  This error is quite another. Please verify that all of the subfolders in the path of the output in SSL dialog box folder do not have a space at the beginning of the folder name. It seems that the project was created within a folder with spaces at the beginning of the folder name. Please correct the path by moving the project to a folder with no space in the beginning of the name of the folder in the parent hierarchy of the folder root of the project.

  

  This should solve the problem. In this case, it does not work, please provide the name of folder path and full ouput file.

  MILIN

• I have a grey bar at the bottom of the safari and iMessage, how to remove it

  I am trying to remove the gray bar at the bottom of the message and safari on my iPad

  Is it just on the screen these two apps?

  Do a forced reboot - after all open applications using the app Chooser - invoked by fast double pressing the home button and drag upwards on each app until it disappears from the screen.

  Meet the sleep/wake and home buttons down until you see the logo  - then release and allow normal start upward

  If this does not work-

  Please take a genius appointment at an Apple Store, or select another authorized service provider.