The lost Redologs and Archivelogs

Similar Questions

• If I turned on the lost mode and erased my iphone, password to unlock will be disabled?

  I lost my iphone. If I turned on the lost mode and erased my iphone, password to unlock will be disabled?

  There will be no access code, but also no data on the phone, so it's okay.  Cannot use the phone until it is activated, which will require your password Apple ID.

  You can receive text messages saying that the phone has been found and asking you to verify your Apple ID, or to connect to a Web site with password Apple ID.  These are fake, just try to get your password to activate the phone stolen.

  Do not remove the phone from the list of devices in iCloud.com

• Cisco Jabber CDR analysis and reporting: the lost packets and other info call stating "Null."

  Hello

  I have recently setup Cisco Jabber Setup and make a video call between Mac and Windows laptop. When I go to the CDR reporting, I can find my call details when I search after the end of the call. However, I see lost packets, jitter, latency as Null.

  I looked in the support forums and made all the required configurations such as going to service settings and allowing the call diagnosis. I also uncheck CDR load only one box, but not seeing any information other than the ip address and the details of the bandwidth of VideoCAP.

  Am I missing something?

  CDR.png

  

  No, the CMR is not implemented in any current version of Jabber, the next version of Jabber will be the first to have * some * RMC capacity.

  What you see at the present time, is the expected behavior.

• Fable 1 (the lost chapters) disk missing 1

  I own fable the lost chapters and you want to play, I found in my garage and I wanted to play again.

  However, it seems to be missing disk 1, I 2-4 drives and the activation key.

  I would be very happy if you could tell me what to do to play fable 1.

  Thank you for your time

  Zac Pickett

  Hi Zac

  Read the following article.

  How to replace Microsoft software or hardware, order service packs and replace manuals:
  http://support.Microsoft.com/kb/326246

  Concerning

• My computer with two hard drives and 2 starting systems has the car crash in the solid state. When I got the new drive and tried to restore from time capsule, I lost some data. How can I see what backups are on the time capsule? My laptop is also backed u

  My computer with two hard drives and 2 starting systems has the car crash in the solid state. When I got the new drive and tried to restore from time capsule, I lost some data. How can I see what backups are on the time capsule? My laptop is also saved to the time capsule. Everything is in 'Data' when I look through the Airport utility. I think that the information that I've lost are still there since I was a Capsule 3 to.

  Time Machine backup to a sparsebundle.

  The sparsebundle will use the share name of computer. So, it should be obvious who is your Macbook and that is your Macpro.

  Open the sparsebundle in Finder and keep open the subfolders until you get to the backup of each separate hard drive...

  You has of course set the exclusion in Time Machine?

  By default, Time Machine will exclude your second drive unless you have included it. Did you?

  Once you get to this level during the backup, you can do a full restore manually whenever you want.

• How can I recover the modules and their data from a failed HARD drive (the lost BONE areas, but data files are readable)?

  The HARD drive that was my OS (Windows XP Pro SP3) failed and lost quite a few areas which are essential for the operating system running. Other data is still readable. A got another HARD drive and installed Windows XP SP2, Firefox and other programs. I was able to retrieve the bookmarks, security certificates, and other profile information using the information found in bandages.

  None of them addressed how do to recover the modules or their data. Specifically, there are several large, elegant scripts that took months to develop and customize.

  Articles related to migration and other do not work for me because they require the old copy of FF is functional, that is not because the OS on this HARD drive is damaged. Is it possible to recover these data, similar (or not) about how I could get the other profile info?

  Have you copied the entire folder C:\Documents and Settings\username \Application Data\Mozilla\Firefox\ on the old drive?
  If this is not the case, can you?
  If so, make a copy and save this folder just in case.

  If so, you could replace this folder on the new facility by \Profiles\ [with your profiles inside] folder and the profiles.ini file [delete all other files / folders that may also be in the folder "Firefox"] -and then replace with the same folder named from the old failed drive. Note that you will lose what you already have with the new installation / profile!
  Your profile folder contains all your personal data and customizations, including looking for plugins, themes, extensions and their data / customizations - but no plugins.
  But if the user logon name is different on the new facility that the former, any extension that uses an absolute path to the file in its prefs will be problems. Easily rectified, by changing the path to the file in the file prefs, js - keep the brake line formatting intact. The extensions created after the era of Firefox 2.0 or 3.0, due to changes in the 'rules' for creating extensions usually are not a problem, but some real old extensions that need only "minor" since that time can still use absolute paths - even though I have not seen myself since Firefox Firefox 3.6 or 4.0.

  View instead of 'Modules' I mentioned the 4 types of 'Modules' separately - Plugins are seen as 'Add-ons', but they are not installed in the profile [except those mislabelled as a "plugin", when they are installed via an XPI file], but rather in the operating system where Firefox 'find' through the registry.

  Note: Migration articles can tell you do not re - use the prefs.js file, due to an issue that I feel is easily fixed with a little inspection and editing. I think you can manage that my perception is that you have a small shovel in your tool box, if you encounter a problem you are able to do a little digging and fixing problems with the paths to files - once you have been warned.

  Overall, if you go Firefox 35 35 or even Firefox 34 to 35, I don't think you will run in all the problems that you can not handle [that I cross my fingers and "hope" that I'm not on what it is obvious].

  With regard to the recovery of the 'data' for individual extensions - there are many ways that extension developers used to store their data and pref. The original way should save in prefs.js or their own file RDF in the profile folder. While Firefox has been developed more, developers started using their own files in the profile folder. And because Mozilla has started using sqlite database files in Firefox 3.0, Mozilla extended their own use of sqlite, as have extension developers.
  Elegant uses the file stylish.sqlite to store 'styles', but something in the back of my mine tells me that 'the index' maybe not in this file with the data. But then again, I can be confusing myself a question I had with GreaseMonkey awhile back where I copied the gm_scripts folder in a new profile and with already installed GreaseMonkey but with no script. These GM scripts worked, but I could not see them or modify them - they do not appear in the user GM extension interface window in Firefox.

• I lost the icon charge and all the legends with icons. Help.

  I installed an update of Mozy, rebooted and found that firefox had lost the legends with the icons, the icon charge completely. Customize the box covers almost the entire page and doesn't include as much as he used to. My Autofill is over. And he has no Navigation bar listed int the toolbars area.

  Have you just moved to Firefox Beta 28.0 to Firefox Beta 29,0? What you are experiencing is the new UI "Australis".

  On the first run, Firefox 29 is expected to present a tour guide you to the menu bar and toolbar changes. If that does not work, maybe there's a way to trigger again? (I have not tried myself.)

  If you prefer the familiar user interface of 28.0 Firefox, you can install the version of 'liberation' instead of the beta. A backup can be a good idea, but you don't need to remove the beta version.

  • To download the full installer: https://www.mozilla.org/firefox/all/ (scroll down to your preferred language)
  • Tips of backup: back up and restore the information contained in the profiles of Firefox

• My macbook froze and I had to turn it off. When restarting and opening ff, ff did not restore the previous session and I lost all the tabs.

  There is no trace of the previous session, to the title of the menu bar. I know it's common, I hope someone has a new response.
  Thank you

  The xtra74pv.default file is the Firefox profile folder, if the file is in the right place and needed to be moved.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox

  If you have an older version of the sessionstore.js file from before the crash then you need to replace the current sessionstore.js with the old copy to see if brings back the lost tabs.

  • http://KB.mozillazine.org/Session_Restore

• OfficeJet 6700: I've just updated my 6700 software and have lost the scan icon and the software - what I can do to fix this?

  I've just updated my software and have lost software and icon of scans!
  What to do to restore it?

  I use Windows 8.1 and trying to connect by wifi for the 6700. The scan icon reappeared today and scanning works now.
  This recovery seems to have fixed things.

• I just wrote about firefox 3.6 with 5.0 for my mac OSX and discovered that my mac will not support it. Is there a way I can recover my lost files and recover the old version?

  I just wrote about firefox 3.6 with 5.0 for my mac OSX and discovered that my mac will not support it. Is there a way I can recover my lost files and recover the old version?

  You can download and install Firefox 3.6 http://www.mozilla.com/firefox/all-older.html

• lost phone and the IMEI number

  woman lost iPhone 5 s. find my phone works does not and can not find the device on my iTunes etc. I stopped by the carrier, but I have the IMEI numbers and the serial number of the phone. Is there anyway to disable I checked via a 3rd site part and he exhibits as activation lock phone? advice please

  3 third-party sites are not reliable sources. Steps to be taken here:

  If your iPhone, iPad or iPod touch is lost or stolen - Apple supports

• I lost bookmarks and tabs, the entire toolbar. How do I find them?

  After the last update of Firefox, I lost my familiar toolbar: no view, Favorites, without tab, none of that. I want them back. BTW, it's my job, not my computer at home. I have the home XP2.

  This has happened

  Each time Firefox opened

  Yesterday

  User Agent

  Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB6; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30 .NET CLR 3.0.04506.648; InfoPath.1)

  See also what happened to the file, edit and view menus? and http://kb.mozillazine.org/Toolbar_customization

• Tried to change the desktop image and lost all of them.

  iPhoto was opened I was looking for an image specific, but also decided that it would be a good idea to multi-task with my iMac and tried to change the image of the desktop at the same time. Apparently, it wasn't the best idea. While seeking photos through system preferences, a pop-up asked if I wanted to pass something. I'll tell you... I didn't read entirely, but thought that he wanted to reopen iPhoto in System Preferences, since I had the app open on its own. I clicked 'OK', which seems to be the point of civilization to collapse, as it appears that I lost all the photos stored in my iPhoto library! What I did and how can I fix? Everyone?

  Hold down the option key while launching iPhoto and using more select Library window select the correct iPhoto library

  If somehow you deleted it (nothing you described in your question can result in the deletion of the iPhoto library) and then restore your backup iPhoto library until you have removed

  LN

• Is it possible to find your apple Bluetooth pencil? I lost mine and I was walking around the House by train so he could connect to Bluetooth

  Is it possible to find your apple Bluetooth pencil?

  I lost mine and I was walking around the House by train so he could connect to the Bluetooth, but when I press pencil apple in Bluetooth settings, it says connect to connect. If he has been associated previously, should it automatically connect when bluetooth range

  None

• Time Capsule has lost the Internet connection and DNS servers

  I use a Time Capsule for Time Machine via Ethernet backups for a couple of years, use it in mode bridge taking its Internet connection directly from my router and connected in turn by Ethernet to my iMac. (Most of the time that I also had wifi off on my iMac and took my Internet directly via the TC Ethernet connection.) A few months ago I upgraded to El Capitan, and the TC has lost its connection Internet (flashing yellow). A few days later I drove back to the Yosemite (for other reasons - Mail had gone mad) to restore a backup of the TC and everything was fine again for a few months. It may or may not be meaningful I plugged TC yesterday to new laptop for my wife to support for the first time, and this laptop is running El Capitan. Since then, the TC has once more lost its Internet connection and DNS settings and is stuck on flashing orange. By clicking on the 'Internet connection' status alert, tells me that the TC is not a valid IP address.

  

  I have reset the TC, repeatedly and reconfigured but all without success. After consulting the other discussions, I also tried giving the unit an alphanumeric name with no spaces & special characters and change the IPv6 "Link-local" configuration only, but this did not affect the result. And I updated the firmware for good measure. Then I unplugged overnight and carried out a full power cycle the steps recommended here, restart the router, TC and the computer (and performed a factory reset on the TC, while the router & computer was turned off). After doing that, the TC has become undetectable by AirPort Utility, until I have reset reconfigured once again, he and ended up in the same place.

  It may or may not be important to mention the following:

  1 when you set the TC after a reset, I repeatedly selected the option of adding to an existing network instead of create a network, but the installation wizard who ignored each time.

  2. in the installation each time, this point, I shows me the following, which seems to suggest that there is a problem but don't say so explicitly:

  

  I would be grateful for any advice.

  Weird how everything's going well for a few years and then crazy when you have something will change.

  El Capo adds some network problems more... but something could be fundamentally wrong with the installer.

  Your current configuration, it is apparently bridged but cannot get an IP address. The address 169.254 is give it since it's self generated.

  You need to do a manual installation. It simply means the Assistant is unable for any reason to be your network so start over and do it manually of misfortune (wow, or also possible misery, woah being where you are now!) to go...!

  1. I need to know what modem you are connected. Make and model please?

  2. the most important. What is the main router on your network or a modem?

  I gave the edge to make manual settings a few times. Somehow my instructions for Yosemite/El Capo got lost... I'll try and hunt down them. In the meantime, the basic method remains the same.

  https://discussions.Apple.com/thread/6509420

  It is not so difficult... You just know where you're going before you start.

  Airtport Utility cannot find airport Time Capsule on one of my Macs 2009