The main screen changes when you connect offshore or after reboot

Similar Questions

• How to have Outlook and Yahoo on screen split when you connect Win 7

  I just want to get around from the office when I connect and have a view with perspective on the yahoo homepage on the right and left of the screen.

  Is this too much to ask?

  Windows 7

  Seems like this should be the obvious - what Miss me?

  T I A

  Hello

  Welcome to the Microsoft community.

  If I understand correctly, you want your PC to start Outlook and Yahoo directly without having to load them. Unfortunately, there is no framework also where you can keep two pages to start with them being on the split screen.

  You need to manually launch these pages and can use Windows Aero Snap to quickly align the pages side by side.

  -Open both pages separately.

  -Select one of them and press on Windows + left arrow.

  -Select other, and then press on Windows + right arrow.

  Hope this information was useful.

• Unable to connect to the main DNS server when you try to access the internet

  Computer has worked fine for the year last until 2 weeks ago and now unable to connect to the internet.

  Windows Vista on broadband and services connected directly to the modem by ethernet.  Provider Internet has run tests and confirmed modem is fine and it's like my laptop runs very well on it.

  Re-initialization of the modem, internet works and you can type in a few places and it seems OK, but you can't do anything on a site, it is, enter the details and even if you try and enter anything, you can usually view 2 sites and then it goes again.  However, the network icon shows that on and connected to the internet.

  The diagnosis, it is said that he cannot access the primary DNS server.

  Do you have any idea how I can fix this or should I just completely re - install windows from the original disk set?

  A few things you can try...  [This will be the Windows to try to automatically fix your connection]

  Open 'Network and sharing Center' (you can search for it in the Vista Start menu)

  Under tasks, click on "diagnose and repair".

  If this fails, you can try...  [This will use the NETSHell utility to RESET your network interface (removes all static configurations and sets DHCP)]

  Open a command prompt (you can also search for it on the start menu in Vista, if you have this OPTION enabled, you need to start as administrator)
  The type of command line: NETSH INTERFACE IP RESET. JOURNAL

  If you still have problems, try to post your IPCONFIG/all, file HOSTS and ROUTE PRINT on this forum.

  How to:

  IPCONFIG/ALL
  Open the command prompt and type: IPCONFIG/all
  To save the output to a file simply type at the command prompt: IPCONFIG/all > filename.txt

  Your HOSTS file is located in the following path (the HOSTS file does not have an extension, it is simply named "HOSTS"):
  %windir%\system32\drivers\etc\HOSTS
  or
  C:\Windows\System32\Drivers\ETC\HOSTS

  ROUTE PRINT
  Open the command prompt and type: ROUTE PRINT
  To save the output to a file simply type at the command prompt: ROUTE PRINT > filename.txt

  PS: If it becomes really hairy, you can provide NETSH DUMP (this provides virtually all network configurations)... You certainly shouldn't need to re - install Windows.  There is probably a setting of network configuration problem that causes this problem.  Good luck!

  -Rob

• How can I remove the split screen option when you open an attachment on the email?

  I had used the option of screen split using strong control of the two tabs on the toolbar at the bottom of the screen and right click for the split-screen option.  Now, when I open an application such as Internet explorer, it happens in the split screen mode.  This is quite annoying and I would like to know how to restore everything in full screen when opening applications, web pages, etc.

  Thank you.

  Hi ClaudiamYE,

  In addition to querry of Samhruth G, please let us know what happens if you click on optimize your internet explore or any application, you get full-screen this time?

  As your subject what I understand you face split screen problem when opening word document in e-mail, so it is called reading pane. You can disable it from within Word, click on start-> all programs-> Word 07-> click the Ribbon on the upper left-> select the Word Options-> Popular => uncheck «attachments open in full screen...» ».

  I hope this helps.

• Unable to get the maximum screen resolution when you use the external monitor

  Hello

  I use Windows 8 on laptop ASUS K55A. I use an external monitor (Samsung SyncMaster 2233BW). Everything works fine except that I do not get the maximum resolution on the external display. The only way I see a sort of an overview of the good resolution is when I choose "extend these screens", but it's very uncomfortable when there's always one screen, I don't actually see.
  How can I increase the resolution of the screen on the external screen? (now, it's on 'show desktop only on 2')
  Thank you!

  I use Windows 8 on laptop ASUS K55A.

  So first a Bing search finds that ASUS K55A probably has the chip Intel HD 4000

  Then,

  https://communities.Intel.com/thread/30360

  (BING search engine for)
  Two monitors specifications Intel HD Graphics 4000

  )

  Graphics card Intel doesn't support double bond, so 1920 x 1200 is the maximum for DVI and HDMI, 2560 x 1440 is only possible with a display port. This is indicated in each product page.
  

• When I move a tab into its own window, the window goes behind the main screen randomly when I click on the timeline for playback. How I can pin the window up? [Mac]

  I can't reduce what is the cause of sometimes decide to disapper and to act as if it were a separate application or to stay on top of the main window. Any clues on this? So tired of having to keep to a minimum the first to find the bin window I created and then resize the main window so that it start mode full screen so that I can be able o click on the bin to strand window, I to him before.

  Hi Sam,

  See if resetting the workspace helps:

  Click window > Workspace > Reset current workspace

  Thank you

  Regalo

• The orientation of the image is changed when you transfer pictures to a Web site

  Download photo questions

  I can't with orientation photo on downloads to internet sites (craigslist, facebook, etc.) of my photos folder.  I rotate images to the correct orientation in my Canon Zoombrowser program (and they appear that way in the 'My pictures' folder), but when I download on another site, the focus is on the side.  Please help me solve this problem.

  You can check for restrictions of size on the size of a site could exceed the size requirements.

  What is the size of the pixels, and the file sizes your download.

• Windows move to the main screen when sleeping Satellite-S50T-B

  Satellite S50T-B, Windows 8.1. Whenever my laptop sleeps, it moves all the icons and windows open on the secondary external monitor on the laptop monitor. Like a lover double screen, it's extremely annoying. I keep having to set up my work space.

  I expect that there is a bug in the video driver, which means that she sees the monitor off as a result of the command 'sleep' of the laptop as a monitor "unplugged" and it is reported to the operating system for the operating system moves all the icons and windows on the main screen, so when I turn again, they are all in the wrong place.

  Please note that the disappearance of the screen as a direct result of it being sent a sleep command should not be interpreted in any way other than the monitor to sleep as said.

  The graphics driver is old way... When can we expect an update?
  When I can see a fix for this frustrating problem?

  Hello

  If you would google for this problem, you will find a lot of discussions and information about this system.

  From my point of few this issue is linked to the State in sleep mode. There are the States of sleep mode (S0, S1, S2, S3, S4)

  S3 is generally the default standby mode, while the S4 is generally the mode of hibernation by default.
  Here all the details:
  http://msdn.Microsoft.com/en-us/library/Windows/hardware/ff564575

  You can use the PowerCfg command to change these settings
  http://TechNet.Microsoft.com/en-us/library/cc748940%28V=WS.10%29.aspx

• With the help of A6, must create menu screen which allows the user to click a button creates a branch to other screens and return to the main menu. When returning to the main screen on which button will be gray or inactive.  How can I do this?  I created

  I am trying to imitate a piece of equipment.  I need the user to be able to click on the specific buttons that have the user to another or screens.  After viewing these screens that will be the user to the main screen where the user which buttons were pressed and which still needed to be pressed.  I create buttons image with the 3 States - who has worked except when the user returns to that slide is reset to zero, and if the user does not see the 3rd State of the button.  How can I get this 3rd State of stay after the user returns to the main screen?

  You can not 'keep' a State, that's what I said in my first answer: "you can create an image with that look of '3' State, make it invisible and show it with the same action when a button is triggered. You will need to insert extra that third picture, first hide it out and make it visible to the advanced action, which I explained. I called this additional 'Done_one' image in the example. The three States you're talking about are in a totally different way to Captivate: for down, more and up-state. You can just tell Captivate to keep a low State, it will be down when the button is pressed. Where my explanation of an additional image.

  No need for all the variables. Looks like you have a lot to learn about variables and advanced actions. I don't see another easy way to achieve what you want. It is not so difficult, tons of examples on my blog.

• BlackBerry smartphone keyboard stuck on the main screen

  My keyboard is still open when I'm on the main screen. When I press the BB button it does not open a menu to hide the key board, instead it just goes to the screen next where are other applications and download buttons etc.

  I tried and it worked, thank you.

• Screen resolution/size changes when you use the touchpad

  Bought Probbok 4530 s. Win 7. I continue to have the screen/print resolutiom size change when you use the touch pad. The pointer seems to 'paste' and then when I move it, the screen get is much lower or higher. I continually have to type ctrl + or - to get the size of the screen back to the 'normal '. Is this something to do with the settings for the touchpad or pointer? Its driving me crazy...

  Bruce

  Hell, I think that this is it... Pinch Zoom! I have disabled that, as well as the "allow the theme change mouse pointers" on the pointers tab. I'm playing with it now, and it seems to have solved the problem. I'll let you know if this isn't... Thanks for the great help, Dragon fur!

• Pop - up screen to record images does not appear when you connect the camera

  Original title: when I plug in my camera to download photos I don't have a pop up screen to ask me some questions were to save you more pictures. I want the pop up screen to come back.
  Guest USB? Download the pictures?

  Hello

  1. Are you referring to the AutoPlay window that appears when you connect a device to the computer?

  What is the number and the model of the camera?

  In case you are referring to the Auto play option then try the troubleshooting steps provided in the link below to fix the problem.

  Troubleshoot AutoPlay

  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-AutoPlay-problems

• How do you disconnect hotmail in windows 8 (when you dream in on email on the main screen icon)?

  How do you disconnect hotmail in windows 8 (when you dream in on email on the main screen icon)?

  I found a solution but it takes several steps, and the average user will never know how do it.

  (1) when your Hotmail account is opened in Windows 8 press the keyboard windows key and the letter 'I' at the same time.

  2.) on the side right under, click "Accounts" "settings".

  3.), click your Hotmail account that will accomplish.

  4.) downstairs there is a box "Remove all accounts" click it. Don't worry, this does not remove your Hotmail account or any account, it's just signs than you. You have to click on the box twice that a notification saying your data will be always preserved in the clouds.

  5.) go back and check the mail application, now you will be asked to you "try again" and it takes back you to the login section.

  Phew, both pis Microsoft na not happen to a better solution. As I said, I see a lot of prosecutions and a lot of divorces because of this.

• How to get out a window, when you use the main screen?

  When I'm in the MBR to 8 window and I opened a program like IE, how to close to return to the main screen. Some other icons are the same thing. I'm looking for a way to close it and return.

  I know that I can go to the lower left window, but did close these windows? Hope this makes since. I think that if I click on music it does the same thing. I can't end this one. I can find a break and other things.

  Maybe I'm not dragging my slider on the right side?

  Thanks, Bruce

  Bring your cursor to the top of the standby screen until you see the hand and then click and drag it to the bottom of the screen... Who's going to close an application and take back you to the start screen.

  Press windows + C which will open the charms of the right side

  Press windows + key X that will open a menu of useful type administration programs

  I hope that helps

  Brian

• I used to get the Blue error screen when you connect to the wide I did the registry clean, but now, when you connect the computer stops with no error message.

  How can I fix it? or what is wrong now?

  Hi Stelana,

  If I understand correctly, the computer turns off when you want to disconnect.

  This behavior may be caused by this security software on the computer, or the computer might be infected with the virus.

  To refine the question, I suggest you try the following steps:

  Step 1: Disable the security software and test, follow the steps mentioned below

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: Activate security software once it's all done.

  Because this problem occurs after cleaning registry, critical registry keys may have been changed.

  Some programs available for free on the Internet may contain spyware, adware or virus. Only download and install programs from software publishers that you trust. Even if the website, that you download the program trust, you must also trust the Publisher of the program. For more information, see when to trust a software publisher.

  Please see the link below:

  Registry cleaners are needed?

  http://Windows.Microsoft.com/en-us/Windows-Vista/are-registry-cleaners-necessary

  Step 2: Run a scan online for any threat and try to correct

  http://OneCare.live.com/site/en-us/Center/cleanup.htm

   

  You can follow the steps provided by Vincenzo Di Russo MVP to get rid of malware on your computer, please click on here.

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.