The mapped drives disappear on win7 pro machines

Similar Questions

• The mapped drives disappear after logoff or restart.

  I can not get a mapped drive to stay mapped after a logoff in Windows 7.  If I map the drive by right clicking post work or the command prompt (net use f: \\sharename / persistent: Yes), once the user disconnects or restarts, the players disappear.

  This occurs only for Windows 7 users.  We have no problem with users under XP.  Someone has an idea?  I tried to connect with different user names, disabling firewall of 3rd party client, disable UAC, etc..

  Hi CSholmire,

  Please let us know your concern.

  I suggest you the methods below. Try these and find the question after each method:

  Method 1:

  1. Open a command prompt as the user that readers are not remembered. Do not use the option "Run as Administrator". In this case, we are unwilling to do this. At the command prompt, type: net use
  2. Does say something like this: use C:\>net. New connections will not remember.
  3. If it is said that they "don't remember", then you need to change this. Type: use net p:yes

  That change the setting of the system for the user to perform the workouts be remembered all the time and the will is the default action.

  If the above is not the case, then map the drive through the command prompt and see if the mapping is known.

  NET use p:yes

  NET use r: \\servername\sharename

  You can change the drive letter a: above to any letter free as you like. However, remember that if you use a letter that is too close to the beginning of the alphabet you can overlap with the USB devices and then one or the other will be absent. You can replace the r: with * and it will start with the next free drive letter starting at the bottom of the alphabet. This should make the reader remember through log and restart.

  Method 2:

  The long-term solution is a registry editing that would get the mapped drives visible to standard and administrative sessions.

  1. Press Windows + R and type: regedit
  2. In Regedit, navigate to HKLM/SOFTWARE/Microsoft / / Windows //Current Version / / policies / / system.
  3. Create a new REG_DWORD entry named "EnableLinkedConnections".
  4. Set the value to 1.
  5. Restart after you add the registry entry and the programs will be able to see the drives mapped forever.

  Note: This section, method, or task contains steps that tells you how to change the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.Microsoft.com/kb/322756/fr/ )

  How to back up and restore the registry in Windows

  Let us know if you encounter problems under windows in the future. We will be happy to help you.

• I deleted the boot camp trying to resize the hard drive on my mac pro book. now, the computer does not start without a bootable device, which I don't have, and any download must be on a windows machine. Can anyone help

  I deleted the boot camp trying to resize the hard drive on my mac pro book. now, the computer does not start without a bootable device, which I don't have, and any download must be on a windows machine. Can anyone help

  1. did you remove Bootcamp using disk utility?

  2 have you tried local restore or recovery of the Internet? - OS X: on OS X Recovery - Apple Support . Mac with built-in optical drives may need 'Gray' disks to boot the system.

• Mapped drives are not available. Machines inaccessible area. Can ping from command prompt.

  Hello

  Working in a Windows domain.  Have a 150 machines in the field.  Now, a single machine seems to have lost the authority to communicate.  This machine was a member of the domain for more than a year and has gained access to these places and several times of the mapped drives.  It's a user's machine, so not sure what may happen before this started.

  At the moment the machine is connected to the network.  I can browse internet fine (internet accessed through the default gateway).  At the command prompt I can ping machines on the domain by ip or name.  Both work very well.

  Can I use remote desktop to connect to other computers on the domain.

  What I can't see all the drives mapped or access the domain computers via Windows Explorer.  When I try to access a mapped drive (accessible by everyone) I gat an error message.  "The location is not available.

  When I try to select a machine in the field of windows Explorer I get 'open folder '.  \\XXXXX is not accessible.  You might not have permission to use this network resource.  Contact the administrator of this server to find out if you have access permissions.  The specified network provider name is invalid.

  Tried this as multiple users.  Not the specific profile.  Tried under the Domain Admin and get the same error.

  Search error messages and found many solutions.  None worked.

  1 - removed from the field and joined.

  2 - disabled and enabled network card.

  3. cannot remove adapter, laptop.

  4 - withdrawn from the area, has changed its name, joined.

  5. deleted and added customer network Ms.

  6 checked svc of workstation was running.

  7 disabled the Windows Firewall.

  8. multiple antivirus scans run.

  9 - set network security: LAN authentication level manager' to 'Send LM and NTLM responses &'.»

  Any ideas?

  Thank you

  Found.  Want to share others.

  It was she.

  http://support.Microsoft.com/kb/170336/en-us

  The network logon order had disappeared.  Replaced by exporting from another machine.

• To replace the hard drive on my MacBook Pro, I disable Photoshop 6, and I believe that I have disabled my Photoshop 5.5 (adobe Creative Suite 5.5 Design Standard). I could through the Adobe Web site to download and install Photoshop 6; but the Adobe Cre

  To replace the hard drive on my MacBook Pro, I disable Photoshop 6, and I believe that I have disabled my Photoshop 5.5 (Adobe Creative Suite 5.5 Design Standard). Supposedly if you turn into a sequel they will disable all. I could, through the Adobe Web site to download and install Photoshop 6; but the Adobe Creative Suite 5.5 Design Standard is not put at my disposal for download. Any suggestions?

  Joseph, here is the link to Download CS5.5 products

  Let us know if you need help with it.

  Atul_Saini

• Windows Update breaks Win7 pro: update from yesterday broke the opening of session Ctrl + Alt + Delete on Win7 pro machines

  Help!

  HP EliteOne 800, configured raid1, Win7 pro 64-bit

  When restarting after updating Windows from yesterday, raid reports 'check' in the BIOS, Windows starts normally then Ctrl + Alt + Delete screen system does not authenticate the we.

  Screen goes black with the mouse cursor and sits there.

  This affects 40 PCs.

  Please advise possible course of action.

  Hello

  Thanks for posting your question on the Microsoft community.

  The question will be better suited to the audience of professionals on the TechNet forums.

  I would recommend posting your query in the TechNet forums.

  TechNet Forum
  https://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itpro

  Thank you

• Need help to remove the hard drive from a Satellite Pro M10

  Hi, a good will would point me in the right direction. I am trying to remove the HD from a satellite pro M10.
  I discovered the net without success.

  A diagram with being usefully etc.

  kind regards J

  Hello

  I can't give you a diagram or something, but I can give an indication to take a look on the front left side of your machine. On this corner of the left side under the volume control is a small blanket where the HARD drive is in. You need only to unscrew the 2 screws that are accessible when you turn on your machine and and look at the bottom of your machine. Do you know what I mean?

  When you remove these 2 screws, you need to remove the HARD drive by taking some screwdriver flat-blade and paste between the disc cover and HARD case. Then carefully remove the cover of the HARD drive and you can recover the HARD drive with the cover and exchange it.

  Voila, your hard drive West. It s is not difficult at all.

  But if you still have some questions then request.

  Welcome them

• TS4.1 WinXP SP3, IDE slow response * only * if the mapped drive open in teststand... file?

  I have a strange situation here. First of all, I must describe the system:

  • 2 machines both with TS4.1 IDEs installed Win XP SP3,
  
  
  • Machine 1 has logical file of common sequence, which is shared with the two machines via a drive mapped "T": sequence files are in 'T:\Logic '.
  
  
  • Both machines have paths of research with the root t: as the last path in the search list.

  Mounting on machine 1 is fine - seq files can be opened in teststand, sailed around, etc. without any problems.

  However, on machine 2, the IDE behaves normally ONLY if you drag the following files to change or double-click to edit. As soon as you open a movie file using the open a TestStand sequence file dialog box, click anywhere on the IDE creates a large volume of network traffic and the IDE "hangs" for a few seconds (I've seen as long as 5) and is completely insensitive (there is a direct correlation between the 'pic' termination of network traffic and the TS IDE becomes sensitive).

  I did a netstat - ano queries and I don't see new ports opened upwards, so all this is paid by the regular windows file sharing link. If I open directly from the w: drive, it is also the...

  -This problem is not continuous: he has been fine for several weeks and came back yesterday. I was lucky enough to find the "do not open any files from within teststand" workaround and continue working normally.

  If you have opened a file in the application, then you exit TS and restart it and all is well again.

  Any ideas? It is UNBELIEVABLY BORING.

  This is probably the problem. Subdirs, especially on a network drive to the research should generally be avoided.

  I would recommend against using the options "search subdirectories", even in the case not connected to the network, since then, not only can it lead to performance problems, it can make unintentionally using the incorrect module because the module where you want to say, if you come to specify the name of the file and rely on the recursive search could be ambiguous and have several possible matches. It is best to use a fixed search with a partial if possible relative path directory. For example, if your search directory is c:\mc-tas and you want to refer to a module in GIP\LLB, you can simply specify GIP\LLB\Mymodule.llb for the path in your steps and you would then not need to c:\mc-tas a recursively searched subdir.

  Hope this helps,

  -Doug

• Cannot access the mapped drive frrom command prompt

  I have two network drives mapped on my Windows 7 Professional machine.  A disc goes to anothetr computer on my network and the other goes to a share through a VPN

  I can see the two and do actions from the Explorer (they still call it that?)

  but when I try to access it from a command prompt or the drive letter, I can use it system cannot find the drive specified... huh?

  Reset you the Protocol TCP/IP - Fixit

  http://support.Microsoft.com/kb/299357

  Command prompt window opened with elevated privileges and type

  IPCONFIG/flushdns

  Press enter

  Reset the default Host file

  FixIt - How can I reset the default Hosts file?

  http://support.Microsoft.com/kb/972034

• 4.0EA3: cannot access the mapped drives (Windows) in the file browser dialog boxes

  All windows files Explorer allows access to local (hard drive) C: and D: (DVD) drives. It is not possible nor access readers mapped (that refer to our server of UNC file paths) - i.e. the network drives.

  I tried the following access to the file Explorer:

  File-> open: does not work

  File Data-> shape-> open: does not work

  Tools-> Preferences-> environment-> Logs-> Browse-> Log Directory: does not work

  It worked / works great in SqlDev 3.2.2

  I tried to dismiss the problems of connection and authentication to our SAN (network drives are fully accessible from Windows Explorer and same 11.1.2.2.0 JDeveloper) - I created a drive mapping on my hard drive. Can't see this mapping within the SqlDev either

  Problem on Win7 64-bit

  Looking forward to feedback from the Oracle, or to see if other users to find the same question

  Alan

  I checked this in the Production version (build 13.80) and my drive letters are back!

  Yay!

• What can I put the RAM and the hard drive of a Macbook Pro 13 "2014 in a Macbook Pro 13" 2016?

  The main logic of my Macbook Pro 13 "2014 card is broken, and it turns out that it will be much easier and just slightly more expensive, buying a new Macbook Pro that, in order to replace. I would like to set up my new Macbook Pro 13 "online in a way such that it is as cheap as possible, while always respecting the level of my former. So, if I could order one with the minimum of RAM and disk space hard and then put these pieces of my old in the new, this would be ideal. I don't know so much about it, and the question is: is it possible?

  my old Mackbook Pro 13 ":"

  -purchased new August 2014

  -3.0 GHz dual-core Intel Core i7, Turbo Boost up to 3.5

  -DDR3L 16 GB 1600 MHz SDRAM

  -Storage flash 512 GB PCIe

  -Intel Iris graphics card

  I'll get to buy e new generation Mackbook Pro 13 "with:"

  -2.9 GHz i5 or i7 3.1 (I've not yet decided)

  -RAM: Here I want to configure it with as little as possible, if I can just put the chips of the old in the new. Is this possible?

  -Hard drive: same thing: if possible, I want to get the cheapest option and simply put the old in the new. Possible?

  Thank you in advance to anyone who might take a few minutes to help out me! It would be much appreciated!

  •

  The RAM is not transferable, and the reader will be not as fast as the original of the newest computer; In addition, change it the warranty of the news of the computer.

  (143318)

• connected through the mapped drive, NOT ReadyCloud

  Very strange, I am able to do my mapped drives fine, so I know connectivity is ok.

  I'm not able to see my SIN in the ReadCloud.Netgear.com or in the desktop application.

  I disabled my firewall. I can't think of anything to try. Any suggestions please?

  Thank you

  Steve

  Hi khawla62,

  Can you confirm if you have added both the Public Google DNS (8.8.8.8) and your IP router as DNS servers on eth0? In addition, disable IPv6.

  Kind regards

  BrianL
  NETGEAR community team

• MYBook Live - cannot create the mapped drive

  AC1200 WiFi Range Extender

  Through the main router, or through the other router stretching I can install and access the shares of my WD MyBook Live. However, throug the Extender I can't. HOWEVER I can see the WD drive in the list of network and can be accessed via the WD software, specific issues with the Extender and mapped drives.

  Everyone has ideas or have I spent a load of money a piece of junk?

  More investigation has shown that a Bullguard update is the problem. Manually disable the firewall of BG, mapping IP-based disks / share and back - light BG seems to have fixed... I have

• HP Laserjet 4350dtn-can not find the driver or install the right driver for Window 7 Pro or Windows XP Pro

  I was able to use a network 4250dtn printer, but can not connect another 4350dtn to computers with Windows 7 Pro or Windows XP Pro.

  I bought a new Lenovo desktop computer and it cannot find/install the correct driver for this printer refurbished.

  Help, please. Thank you. The Hoang

  Hello

  It's correspondence, that HP has HP Laserjet 4350dtn

  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=412170&lang=en&lang=en&cc=us&cc=us

  See you soon.

• RMAN cannot write to the mapped drive

  Hello

  8.1.7 on Win 2003 my rman script is:

  BACKUP

  ADDITIONAL = 0

  FORMAT 'F:\BACKUP\RMAN\FULL\bk_u%u_s%s_p%p_t%t '.

  FILESPERSET 6

  SETSIZE 29000000

  DATABASE;

  F is a mapped drive.

  But RMAN fails with:

  RMAN-10035: exception raised in RPC: ORA-19504: could not create the file "" F:\BACKUP\RMAN\FULL\bk_uhios0hpc_s270898_p1_t834684716. "

  ORA-27040: skgfrcre: error, unable to create the file

  04002 - OSD: could not open the file

  S/O-error: (OS 3) the system cannot find the path specified.

  In the command line when I derived:

  dir F:\BACKUP\RMAN\FULL

  It is ok.

  Thanks for the help.

  Hello

  Thanks DavidAW.

  Sorry I was on another site with other tasks.

  Here is the error of the battery:

  RMAN-00571: ===========================================================

  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.

  RMAN-00571: ===========================================================

  RMAN-03007: renewable error occurred during the execution of the command: backup

  RMAN-07004: unhandled exception during execution of the order on channel ch00

  RMAN-10035: exception raised in RPC: ORA-19504: cannot create the file '\\SERVER\BACKUP\\RMAN\FULL\MYDB\bk_uh6os0eg9_s270886_p1_t834681353 '.

  ORA-27040: skgfrcre: error, unable to create the file

  OSD-04001: invalid logical block size (BONE 512)

  RMAN-10031: ORA-19624 has occurred during the call to DBMS_BACKUP_RESTORE. BACKUPPIECECREATE

  Complete recovery manager.

  I can do:

  NET use yourpassword \\fileshare\sharename / user: domain\username

  and to create any file.

  Kind regards.