connected through the mapped drive, NOT ReadyCloud

Similar Questions

• What is the proper way to create a user who can connect through the Console, but not through the VMWare Client?

  I did the following steps:

  1. create a user

  2. assign the Group root (remove all the other group of the user)

  What's my not just?

  Thank you!

  It is the way to do it.   Either you must be part of the root group to be given to the role admin (or a bespoke) at the level of the host to access the DCUI.

  If you create a user is added to the root group, but is assigned all permissions (either singularly or through a group) on the host then, then the user will be able to connect to the DCUI but not the client vSphere (or any other method of the API).

• Received my brother in laws laptop cannot connect wireless, although I can of my own laptop. Trying to connect through the new laptop, I do not see even my own network.

  Received my brother in laws laptop cannot connect wireless, although I can of my own laptop. Trying to connect through the new laptop, I do not see even my own network! What I'm missing here? I'm sure it's maybe something simple, but for the life of me! (When my brother-in-law used this computer, he only uses it through dialup (!), he lives in a remote area). With the help of Vista, and when 'Management of connections' I see my network...

  original title: cannot connect wireless

  Hello

  ·         You get the error message?

  Method 1:

  I suggest you update the drivers for hardware connected to your computer on the Web site of the manufacturer check if it works.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 2:

  Also, follow the steps in troubleshooting section and check if that helps:

  In the Windows wireless network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wireless-network-connection-problems-in-Windows

  Check out these links and check if that helps

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-wireless-router

  http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-wireless-network

  See also:

  Solve problems with computers not appearing is not in the network map

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-computers-not-appearing-on-the-network-map

  Hope this helps

• I get an error message: The Nvidia OpenGL driver lost connection with the display driver and can not continue. Error code 8

  When I play the virtual Interactiver - Second Life Community. The screen turns white and windows tells me the display adapter stopped responding and has recovered. While the second life Viewer is still Virgin (white). I get the error in a box: The Nvidia OpenGL driver lost connection with the display driver and can not continue. The application must close. Please visit http://www.nvidia.com/page/support.html for help. Error code 8. Now, I worked with Nvidia to do a clean install of the latest version of the driver. a driver in safe mode installation. They suggested to try an earlier version of the driver. Nothing that they worked me and told me to see Microsoft. The pilot hangs every 30 min or so, all online in the second game of life. Can someone help me?

  Information System
  ------------------
  Time of this report: 13/06/2011, 19:40:20
  Machine name: BEN - PC
  Operating system: Windows 7 Professional 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.110408) - 1631
  Language: English (regional setting: English)
  System manufacturer: HP-Pavilion
  System model: GC670AA-ABA a6120n
  BIOS: Phoenix - AwardBIOS v6.00PG
  Processor: Intel (r) Core (TM) 2 Duo CPU E4400 @ 2.00 GHz (2 CPUs), ~2.0GHz
  Memory: 4096 MB RAM
  Available OS memory: 3582MB RAM
  Page file: 1690MB used, 5472 MB of available space
  Windows Dir: C:\Windows
  DirectX version: DirectX 11
  DX setup parameters: not found
  User DPI setting: 96 DPI (100%)
  System DPI setting: 96 DPI (100%)
  DWM DPI Scaling: disabled
  DxDiag Version: 6.01.7601.17514 64 bit Unicode

  Two monitors

  Display devices
  ---------------
  Card name: NVIDIA GeForce 7600 GT
  Manufacturer: NVIDIA
  Track type: GeForce 7600 GT
  DAC type: Integrated RAMDAC
  The device key: Enum\PCI\VEN_10DE & DEV_0391 & SUBSYS_201F19F1 & REV_A1
  Memory display: 1768 MB
  Dedicated memory: 248 MB
  Shared memory: 1519 MB
  Current mode: 1600 x 900 (32 bit) (60 Hz)
  Name of the monitor: generic PnP monitor
  Monitor model: G205H (Acer)

  Card name: NVIDIA GeForce 7600 GT
  Manufacturer: NVIDIA
  Track type: GeForce 7600 GT
  DAC type: Integrated RAMDAC
  The device key: Enum\PCI\VEN_10DE & DEV_0391 & SUBSYS_201F19F1 & REV_A1
  Memory display: 1768 MB
  Dedicated memory: 248 MB
  Shared memory: 1519 MB
  Current mode: 1280 x 1024 (32 bit) (60 Hz)
  Name of the monitor: generic PnP monitor
  Monitor model: NEC LCD7V

  Hello

  I suggest that you have watch the following link below:

  http://forums.developer.nvidia.com/index.php?showtopic=5331

  I hope this helps.

• Printing problems - I get the sizes of evil when I print from LR 5.5. on my Epson 3880 printer. USB connection. Reinstalled printer driver - not. Want to obey my print settings. What can be wrong?

  Printing problems - I get the sizes of evil when I print from LR 5.5. on my Epson 3880 printer. USB connection. Reinstalled printer driver - not. Want to obey my print settings. What can be wrong?

  I am not familiar with these communities - not provide Adobe and LR all direct support?

  You bet it's your page layout. As I said, the Epson driver has many offers for the same size paper. In addition, do NOT use Auto expand in this selection.

• The mapped drives disappear after logoff or restart.

  I can not get a mapped drive to stay mapped after a logoff in Windows 7.  If I map the drive by right clicking post work or the command prompt (net use f: \\sharename / persistent: Yes), once the user disconnects or restarts, the players disappear.

  This occurs only for Windows 7 users.  We have no problem with users under XP.  Someone has an idea?  I tried to connect with different user names, disabling firewall of 3rd party client, disable UAC, etc..

  Hi CSholmire,

  Please let us know your concern.

  I suggest you the methods below. Try these and find the question after each method:

  Method 1:

  1. Open a command prompt as the user that readers are not remembered. Do not use the option "Run as Administrator". In this case, we are unwilling to do this. At the command prompt, type: net use
  2. Does say something like this: use C:\>net. New connections will not remember.
  3. If it is said that they "don't remember", then you need to change this. Type: use net p:yes

  That change the setting of the system for the user to perform the workouts be remembered all the time and the will is the default action.

  If the above is not the case, then map the drive through the command prompt and see if the mapping is known.

  NET use p:yes

  NET use r: \\servername\sharename

  You can change the drive letter a: above to any letter free as you like. However, remember that if you use a letter that is too close to the beginning of the alphabet you can overlap with the USB devices and then one or the other will be absent. You can replace the r: with * and it will start with the next free drive letter starting at the bottom of the alphabet. This should make the reader remember through log and restart.

  Method 2:

  The long-term solution is a registry editing that would get the mapped drives visible to standard and administrative sessions.

  1. Press Windows + R and type: regedit
  2. In Regedit, navigate to HKLM/SOFTWARE/Microsoft / / Windows //Current Version / / policies / / system.
  3. Create a new REG_DWORD entry named "EnableLinkedConnections".
  4. Set the value to 1.
  5. Restart after you add the registry entry and the programs will be able to see the drives mapped forever.

  Note: This section, method, or task contains steps that tells you how to change the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.Microsoft.com/kb/322756/fr/ )

  How to back up and restore the registry in Windows

  Let us know if you encounter problems under windows in the future. We will be happy to help you.

• Driver NVIDIA OpenGL lost the connection with the display driver

  Laptop Alienware M14x

  Windows 7 pre 64-bit

  8 GB ram

  3 GB of video: NVIDIA GeForce GT 555 M

  Intel i7 2760QM

  AE CS4

  Æ keeps crashing. I get the following message while doing something as simple as scrubbing through the timeline, or change the opacity of a layer. 1080 p, I have a layer of the image, a solid, color corrections, and that's all. I just got this new computer, and I've never had this problem on my old computer.

  This message is displayed after AE blocks. "The driver NVIDIA OpenGL lost the connection with the display driver and can not continue. The application must close. »

  This message is displayed in the taskbar: "display driver stopped responding and has recovered. Display driver NVIDIA Windows kernel Mode Driver, Version 267.21 stopped responding and has successfully recovered"

  any ideas on how to stop EI do not cause my display driver to stop working?

  Thanks, Ramzi Rebeiz

  Turn off OpenGL in the AE preferences.

  Mylenium

• My works wireless, but my connection to the LAN does not work?

  I have a Toshiba L305-S5917 laptop and my connection to the LAN does not at all, when I plug my CAT 5 cable into the slot not strikes is the lights. IM able to use my wireless works fine. All this happened when my laptop crashed due to a virus. I reloaded all windows from XP to Windows 7 and also bought Numbus disk driver and recovery for my model laptop and still no connection to the LAN... pls help.

  Hello

  Sorry I'm not quite clear about the situation.

  You posted on the Vista Forum; you have loaded Win XP and you running Windows 7?

  If the computer is currently running on Windows 7, newspaper to the support site for Toshiba laptop, download Windows 7 drivers for the wireless network card and install them.

  In general.

  Check the Device Manager for the entry of valid card of the wire.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  ----------------------------------

  Try installing the latest drivers from the card manufacturer support page.

  Download the drivers and extract them to a folder of your choice.

  In Device Manager, right-click on the adapter.

  Click Update drivers and choose her browse my computer for drivers.

  Choose let me a list of choices, click on disk and point to the folder with the drivers.
  -------------------------------------

  Check network connections to make sure that you have a Local Area Connection icon/entry, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  Connect you to the menu of the router from a work computer and make sure DHCP is on, and it is configured to assign IPs which can cover the number of computers that are connected (a bit more will be even better).

  Turn off the computer and the router, reset the router and the computer.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  On the State of intellectual property.

  TCP/IP and its variables usually look like this.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  Typical TCP/IP status looks like this.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.
  
  Physical address is the MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.
  
  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2 There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  ------------------------

  Also, make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted

  Please note that some 3rd party software firewall continue to block aspects of the Local traffic even it they are off (off) . If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

• I can ping a host using the IP, but I can't connect to the network drive

  I've insatalled windows 7 on a pc and the computer is joined to the domain. I ping the pc but I can not access the shared printer is installed. I even tried to disable windows and the kaspersky firewall. but still no access.

  Hi Mohammed,.

  Thanks for posting in the Microsoft community!

  After the description of the question, I understand that you are not able to connect to the host drive. Because the problem is related to the field, it would be better suited in the TechNet community.
  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

• I'm trying to update the software to 9.3 on my IPad 2.  I get the message that it is impossible to check the update since I'm no longer connected to the Internet.  Not true.  I am connected.  Any suggestions?

  I'm trying to update my IPad 2 iOS 9.3 software.  It keeps telling me that it cannot be verified because I am is no longer connected to the Internet.  Not true.  I am connected.  Any suggestions?

  Many users have encountered problems to update their devices, their activation or signing into their account after updating iOS 9.3. Apple is aware of the problem and working on a fix.

  Take a look at these articles for additional information on the issue or adapt:

  If you are unable to activate your iPhone, iPad or iPod touch after installing iOS 9.3 - Apple Support

  If you are unable to activate your iPad 2 (GSM model) update to iOS 9.3If you cannot activate your iPad 2 (GSM model) updated to iOS 9.3

  Apple stop updates iOS 9.3 for older iDevices due to activation server locking problems more

• I have a mac 2009 i (late), I want again to install snow leopard (I have the disc), but my driver disk is broken! So I want to ask if there is a way to create a disk image of my windows pc to use it through the hard drive of my imac Lord?

  I have a mac 2009 i (late), I want again to install snow leopard (I have the disc), but my driver disk is broken! So I want to ask if there is a way to create a disk image of my windows pc to use it through the hard drive of my imac Lord?

  External DVD USB drives are cheap. Usually $20 for a good quality player. Just buy one of these at Best Buy or another store and use it to install Snow Leopard. Then you also have a drive for something else that you have on the disk.

• Test the connection to the database failed: connection to the server could not

  I have one of my servers HPOV NNMi 9.23 restarted this morning and NNMi is loading is no longer.  I see the following errors in the newspapers said:

  /var/opt/OV/log/NNM/public/nmsdbmgr.log

  06/04/2015-09:28:05 connection to the database test failed: connection to the server could not: connection refused
  The server running on host "127.0.0.1" and accept
  TCP/IP connections on port 5432?

  /var/opt/OV/log/NNM/public/postgres.log

  2015-04-06 09:25:55.312 EDT: 8580:0LOG: could not translate the hostname "localhost", "5432" service at the address: name or service not known not

  2015-04-06 09:25:55.312 EDT: 8580:0WARNING: could not create listen to "localhost".

  2015-04-06 09:25:55.312 EDT: 8580:0FATAL: could not create TCP/IP sockets

  I have checked/etc/hosts and found the following entry:

  #; Local
  #;
  127.0.0.1 localhost

  The command line, I can ping localhost without problem.  Not sure why NNMi begins not at this point.

  Turns out be the permissions on the file/etc/hosts.

• Account of Hotmail, when I connect to the page will not download?

  Once I connect to the page will not download?

  Hello

  Please provide all the information we need to help us help you.

  How to ask a question
  http://support.Microsoft.com/kb/555375

  -------------------------------

  Answers is a peer group supported and unfortunately has no real influence on Hotmail.

  HotMail has its own Forums, so you can ask your questions there.

  Windows Live Solution Center - HotMail - HotMail Forums Solutions
  http://windowslivehelp.com/

  Hotmail - Forums
  http://windowslivehelp.com/forums.aspx?ProductID=1

  Hotmail - Solutions
  http://windowslivehelp.com/solutions.aspx?ProductID=1

  How to contact Windows Live Hotmail Support
  http://email.about.com/od/hotmailtips/Qt/et_hotmail_supp.htm

  Windows Live Hotmail Top issues and Support information
  http://support.Microsoft.com/kb/316659/en-us

  Compromised account - access unauthorized account - how to recover your account
  http://windowslivehelp.com/solution.aspx?SolutionID=6ea0c7b3-1473-4176-b03f-145b951dcb41

  Hotmail hacked? Take these steps
  http://blogs.msdn.com/b/securitytipstalk/archive/2010/07/07/Hotmail-hacked-take-these-steps.aspx

  I hope this helps.

• WRTG54S to connect to the network, but not internet

  I have a WRTG54S and Mediacom 12mbps. My router worked fine on my old laptop (a Dell Vista), he was sitting in a box for about 6 months and now that I have a new (Sony running 7) I can connect to my network, but not internet. I have updated the firmware of 7.6 to 7.8 without change. I have tried no security, wep and wap without change. Also, I cloned the MAC, once again no change. Windows cannot detect all problems, and when I try to activate the router to connect to the internet it always says connection failed. I can connect directly connected to the modem but not when connected to the router or wireless. Any ideas? Thank you

  Problem solved. I had to go to a Motorola SurfBoard 4100 to a 5100. Thanks anyway

• Computer connects to the network, but not to the Internet, connect to the only local

  Hello world

  OK, so I have a HP computer with the installed version of Windows Vista Home Premium 32-bit. I've had it for almost 2 years now and have had no problems connecting to Internet... until now.

  I can connect to networks... both wireless and cable, but I can not get Internet. I used the IP, subnet mask, gateway and server settings DNS to another computer that works with this specific local network just to see what happens... my computer has failed.
  Until recently, I could connect to this WiFi connection in a coffee shop, but the last time I tried it didn't work. I've connected to the network but not the Internet. He told me that the DNS server did not. I'm starting to think that something is wrong with my computer.

  I saw that the solution for some people running the Norton removal tool, however I had uninstalled Norton almost as soon as I got my computer 2 years ago and ran McAfee instead. I don't think that Norton should have an impact on me more.

  Is there a solution to this problem... or I'll just have to try everything that is out there?

  Thanks for your help!

  Hi MomPlaysBass,

  Finally, my problem has been resolved - it wasn't my computer after all. The modem may only be connected to a computer. If you want to connect to another computer, you can connect the computer to the modem and then put it back. My computer worked fine after that. Whenever we want to switch between computers, even if I have to reset the modem.

  I don't think you have the same problem, but just in case, you can try to reset your modem - it's a button on the back or a small hole that you can reach with a pen... Hold the stylus for about 5 sec or maybe a bit more and then let go. That should reset your modem and might help you with your problem. Your computer should also have created a restore point... If all else fails maybe you can try to get back to the final point where your computer worked.