The method cannot be used as a constructor?

Similar Questions

• Pinting/sharing, error 2114. The printer cannot be used by others on the network. Event ID: 315

  In my event log, I get the message "the print spooler could not share printer HP Deskject F2200 series with the HP Deskjet F2200 shared resource name.

  series. Error 2114. The printer cannot be used by others on the network.  Event ID: 315. "I have only one printer, and I'm not on a network share.  I only turn

  It's on when I need to use it.  Why I get this error?  It would cause my computer to freeze?

  BJB

  Hello

  I suggest you to refer to this link and check if it helps:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/error-2114/b87aa4ed-b4fb-43E0-9080-e3a7d7ffeaa3

  It will be useful.

• Can embed you fonts in a pdf file after that the pdf has been created? I received a PDF of an another designer, made a few minor corrections, and now the printer cannot be used because the original pdf didn't have all fonts embedded. Any ideas?

  Can embed you fonts in a pdf file after that the pdf has been created? I received a PDF of an another designer, made a few minor corrections, and now the printer cannot be used because the original pdf didn't have all fonts embedded. Any ideas?

  Use the Acrobat Pro preflight!

  To incorporate the missing fonts in Acrobat Preflight profile will incorporate the missing fonts in your PDF file assuming that:

  (1) the fonts in question are installed on your system and

  (2) the police themselves is not protected against the incorporation (they can at least see and print incorporation.

  -Dov

• Why list of members of the period cannot be used in the rule file to limit the period?

  Hello

  HFM, I created a list of members period in the members list file.

  for example:

  Dim aPeriodLists (9)

  If HS. Dimension = 'Period' Then

  aPeriodLists (1) = "[FcstActMths]".

  ......

  ......

  ===========================

  ElseIf HS. Dimension = 'Period' Then

  If HS. MemberListID = 1 Then

  HS. AddMembertoList "January".

  HS. AddMembertoList "February".

  ===========================

  then in the rules file, I created a rule ondemand for datacopy real forecasts, but want to copy for the period of the membership list [FcstActMths].

  so as a rule I tried below:

  ......

  For each povPeriod in Hs.Period.List("","[FcstActMths]")

  .......

  but it does not work, the error indicates:

  object does not support this property or method HS. Period.List.

  =====================================================================================================================

  Then I found that, for the function of list of the object are not period dimension.

  But what I want is efficiency above.

  Is there another way could do?

  =====================================================================================================================

  I also tried to create the array, like this:

  Dim FcstActMths

  FcstActMths = Array ("January", "February")

  ..........................

  For each povPeriod in FcstActMths

  .........................

  =====================================================================================================================

  has not worked either, during the race, the table cannot limit in time that we select...

  Hello

  The reason why the rules does not run is because you canmot run rules

  for each period of your table, but only for the month that is on your

  Current POV.

  On this basis, you must change your rules and write something similar to:

  Table = (month1, Month2,... monthX)

  If instr (table, current month) > 0 then

  Run rules

  End if

  I'm sure it will work.

  See you soon,.

  Thanos

  November 24, 2015 07:45, "community-admin" [email protected]>

• I forgot to disable the subscription to Office 365 from the old account. Now the key cannot be used.

  I bought the Acer Aspire 10 Switch (SW5 - 012) on 13.07.2015 and indicés to Microsoft Office 365, that was in the box with the tablet. I have been indicés with the e-mail I deleted later. While 2 disabling month worked, I used Office with my new account. Old account has been deleted completely last weekend and Office stopped working both Tablet and PC. I realized that I forgot to unregister it from the old account. Key does not work on a new account now. Is there a chanse to do the key work? I feel really stupid right now. Help, please!

  PS I spoke with Microsoft, they said I should talk with the company that made my tablet.

  Problem solved by myself 2 weeks ago.

• ERROR INDICATING THAT THE KEY CANNOT BE USED... WHAT I DO NOW?

  I INSTALLED WINDOWS 7 HOME BASIC, PREVIOUSLY ACTIVATED 2 TIMES, UNFORTUNATELY, I HAVE TO FORMAT THE DRIVE C, BUT THEN WHEN I REINSTALLED THE SAME OPERATING SYSTEM ON THE SAME COMPUTER COULD NOT BE ACTIVATED, INDICATING ERROR THAT THE KEY COULD NOT BE USED... WHAT SHOULD I DO NOW?

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Stabilizer of the curvature and the speed cannot be used in the same clip.  explain the error message please.

  Shoot - how to capture how to do basic retouching.

  Try to use the stabilizer warp on a few sequences in hand and got the Red "NO" message.

  I can still do this, or I made my changes in the wrong order as I perhaps should use stabilizer warp first or something.

  You are right. You can them to apply a variation of the speed of a clip with stabilizer Warp applied. Here is an easy workwaround.

  You can also apply stabilizing Warp then nesting the clip and change of speed.

  Peter Garaway

  Adobe

  Premiere Pro

• Location of the method cannot find in Flash example

  The issue I'm having is that I search high and low to find where the "flashmo_graphic()" method is defined in the example that can be found here:

  http://www.flashmo.com/preview/flashmo_158_heart_effect

  I have also attached file.  There is a "caurina.transitions. *";  the file is imported, it is attached.  in any case, you will notice that there is only 1 action script framework and in around midway, there is the code:

  function flashmo_create(e:Event):void
  {
  var mc:MovieClip = new flashmo_graphic();
  
  mc.gotoAndStop (Math.floor (flashmo_group.numChildren % mc.totalFrames) + 1);

  .

  .

  .

  The question that I have is to find out what flashmo_graphic() is.  Can someone tell me what is this method and better yet how I would find out for me?

  Thank you

  Brian

  var mc:MovieClip = new flashmo_graphic();

  This is the script to add a movieclip on the stage.

  Go to the library. Right-click on the first symbol (flashmo graphic), and then select the link see you a pop up with some properties of the symbol.

  In the class, you can see flashmo_graphic which is the name of the symbol binding.

• The iPhone cannot be used because it requires a newer version of itunes

  I get this error message "the iPhone is useless because it requires a newer version of iTunes.

  Download a more recent iTunes.

• Update KB 2509503 cannot be used?

  I reiceved an update for Microsoft Office 2003 KB2509503. Then a label came up saying: the update cannot be used.

  What should do?

  Hi Inga-LillMaunula

   

  1. you have office 2003 installed on the computer?
  2. do you have Microsoft Office 2003 service pack 3 installed on the computer?

  
  If you meet all the prerequisites for the update then I suggest you try to manually download the update and install it. Check if this helps-

  http://support.Microsoft.com/kb/2509503

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=8b68cf68-1606-4649-B860-a64702c6cf33

   

  I hope this helps.

• Windows 7 Professional 64 bit product key cannot be used?

  Well, I bought a legitimate copy of Windows 7 Professional 64 Bit and I try to update my PC after installing on the new PC to my father that I built for him. When I installed it on my gaming PC, everything was fine, but now I'm doing it on my work PC and it comes up saying that the key cannot be used on this computer! What! And yes the key that I use IS the one that came with my Windows software. It is NOT for the office, but for Windows 7! What is the PROBLEM! When I bought this copy of Windows I wanted to use it on several PC in our House. Product key should work whenever I use it! I paid for this thing, and the key is legitimate! And I won't go to the table more of 100 to 200 dollars for ANOTHER copy of windows just if I have a product key to be used; It's ridiculous!

  you may not use the software on any other computer.

  You agreed to the end user license agreement when you install. André has repeated the first part of the above agreement. Whether you like it or not, these are the conditions of the license. You cannot use the same key on multiple computers.

• I want to burn files to a cd, there are two files, one is 8.1 GB and the other is 3.5 GB, what capacity of CD should I buy to take account of these files, or is there any method I can use?

  I want to burn files to a cd, there are two files, one is 8.1 GB and the other is 3.5 GB, what capacity of CD should I buy to take account of these files, or is there any method I can use?

  First of all, you cannot use a CD for each file - they do not provide enough space (and I'm pretty sure same compression help not enough).

  You can burn the 3.5 GB on DVD or DVD-R DVD - RW file, as long as it's a guy with enough space http://en.wikipedia.org/wiki/DVD.

  8.1 GB file CAN be turned into a DVD, but you need a very special type (and maybe special software - I'm not sure about this).  An article on the different types of DVDs and their abilities of here: http://en.wikipedia.org/wiki/DVD.

  There are a few 3rd party software products that allow you to split a large file inot several pieces to fit on a game sequenced CD, but I couldn't find one that was free.  To do this, you can check on www.download.com, www.tucows.com, Bing, and Google.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Sending parameter using the METHOD (HTTP POST = PROBLEM WEBSERVICE)

  Hello world

  I need help here

  I tried 1 week to the code to send the parameter but the error still result

  It sends no parameter at all the

  Heres my PPC

  ApplicationUI::ApplicationUI(bb::cascades::Application *app) :
          QObject(app)
  {
  
      m_pTranslator = new QTranslator(this);
      m_pLocaleHandler = new LocaleHandler(this);
  
      bool res = QObject::connect(m_pLocaleHandler, SIGNAL(systemLanguageChanged()), this, SLOT(onSystemLanguageChanged()));
      // This is only available in Debug builds
      Q_ASSERT(res);
      // Since the variable is not used in the app, this is added to avoid a
  
      Q_UNUSED(res);
  
      onSystemLanguageChanged();
  
      QmlDocument *qml = QmlDocument::create("asset:///main.qml").parent(this);
  
      qml->setContextProperty("MyApp",this);
      // Create root object for the UI
      AbstractPane *root = qml->createRootObject();
  
      // Set created root object as the application scene
      app->setScene(root);
  }
  
  void ApplicationUI::post(const QString &fullName, const QString &email, const QString &password)
  {
      QNetworkAccessManager connection;
  
      QUrl url("http://www.rws.rajaspot.com/rs_usermanagementclient.php");
      QNetworkRequest req(url);
      //url.addQueryItem("parameter", "14");
  
      QByteArray postData;
  
      postData.append("method=rsnewuser&").append("fullName="+fullName).append("email="+email).append("password="+password);
  
      QNetworkReply* reply = connection.post(req, postData);
      bool ok = connect(reply, SIGNAL(finished()), this, SLOT(postFinished()));
      Q_ASSERT(ok);
      Q_UNUSED(ok);
  
  }
  
  /**
   * PostHttp::onGetReply()
   *
   * SLOT
   * Read and return the http response from our http post request
   */
  void ApplicationUI::postFinished()
  {
      QNetworkReply* reply = qobject_cast(sender());
  
      /* QString response;
      if (reply) {*/
          if (reply->error() == QNetworkReply::NoError) {
              QString result = reply->readAll();
  
              /*const int available = reply->bytesAvailable();
              if (available > 0) {
                  const QByteArray buffer(reply->readAll());
                  response = QString::fromUtf8(buffer);
              }*/
          } else {
              int errorCode = reply->attribute(QNetworkRequest::HttpStatusCodeAttribute).toInt();
              qDebug() << errorCode << endl << reply ->errorString();
          }
  
          reply->deleteLater();
      }
  
  void ApplicationUI::onSystemLanguageChanged()
  {
      QCoreApplication::instance()->removeTranslator(m_pTranslator);
      // Initiate, load and install the application translation files.
      QString locale_string = QLocale().name();
      QString file_name = QString("UsernamePHP_%1").arg(locale_string);
      if (m_pTranslator->load(file_name, "app/native/qm")) {
          QCoreApplication::instance()->installTranslator(m_pTranslator);
      }
  }
  

  Heres my hpp

  #ifndef ApplicationUI_HPP_
  #define ApplicationUI_HPP_
  
  #include 
  
  namespace bb
  {
      namespace cascades
      {
          class Application;
          class LocaleHandler;
      }
  }
  
  class QTranslator;
  
  /*!
   * @brief Application object
   *
   *
   */
  
  class ApplicationUI : public QObject
  {
      Q_OBJECT
  public:
      ApplicationUI(bb::cascades::Application *app);
      virtual ~ApplicationUI() { }
  public:
      Q_INVOKABLE void post(const QString &fullName, const QString &email, const QString &password);
  
    Q_SIGNALS:
              void complete(const QString &info);
    private Q_SLOTS:
              void postFinished();
  
  private slots:
         void onSystemLanguageChanged();
  
  private:
      QTranslator* m_pTranslator;
      bb::cascades::LocaleHandler* m_pLocaleHandler;
  };
  
  #endif /* ApplicationUI_HPP_ */
  

  and this is my my main.qml

  Button{
              id : button
              text : "Register"
              onClicked: {
                 MyApp.post(tf1.text,tf2.text,tfpass.text)
  
              }
              horizontalAlignment: HorizontalAlignment.Center
          }
  

  I need to send the parameter to http://www.rws.rajaspot.com/rs_usermanagementclient.php

  but its like divider by 2, the parameter 'method = rsnewuser' and the content is fullName, email, and password

  What a success, it will show on http://www.rws.rajaspot.com/rs_userclient.php but I try this error code again

  any ideas what should I do?

  Thank you

  I mean not to define QNetworkAccessManager inside the function.

  For example:

  Declare the pointer to QNetworkAccessManager in your header file (all)

  QNetworkAccessManager *connection;
  

  and then set it in the constructor of the app inside the function you or you. In the second case, you must remove QNetworkAccessManager pointer after postFinished. (connection-> deleteLater())

  connection = new QNetworkAccessManager(this);
  

  and the full code of the POST function

  ...post(const QString &fullName, const QString &email, const QString &password)
  {
      QUrl url("http://www.rws.rajaspot.com/rs_usermanagementclient.php");
  
      QUrl postParams;
      postParams.addQueryItem("method", "rsnewuser");
      postParams.addQueryItem("fullName", fullName);
      postParams.addQueryItem("email", email);
      postParams.addQueryItem("password", password);
  
      QNetworkRequest req(url);
      req.setHeader(QNetworkRequest::ContentTypeHeader, "application/x-www-form-urlencoded");
  
      QNetworkReply* reply = connection->post(req, postParams.encodedQuery());
      bool ok = connect(reply, SIGNAL(finished()), this, SLOT(postFinished()));
      Q_ASSERT(ok);
      Q_UNUSED(ok);
  }
  

  It may be useful

   

• Using the method of the cushion two fingers to scroll

  I just bought a HP dv7t laptop and cannot scroll regularly using the method of the buffer 2 fingers.  This is a new laptop.  Need help because it drives me crazy... Ralph

  Called HP support and they tried to solve the problem to play around with all the settings, nothing worked.  I decided that I wanted a replacement and they agreed, BUT it was going to cost me another $137 because the price had increased.  Needless to say I was angry, and he went out on the tech rep.  Escallated Manager and after reminding them that this order has indicated very clearly "Returns or exchanges of this product will be accepted until 21 days after childbirth' and it was 1 day after childbirth and that it would be illegal to deny the full exchange for $ 0 they caved.  However; they would not place the order before receiving the defective pc.  Enough said for their support.  I have no idea how they keep their customers with these idiots or stupid policies.  The next day, I returned the pc through their shipping prepaid by e-mail label.  That evening, I received notification that the order has been placed at $ 0 charge with the date of delivery of January 27, including 2 delivery day (it was nice because it is normally 5-7 business days).

  Hope this new pc is against any defect... Ralph

• OpenScript / database: String obtained from the data bank cannot be used for parameters

  Hello
  
  I add a jar to java code OpenScript file. Since the need to enter the settings of the front console run the jar file, I think that it can read the settings from the database and then run it as "java-jar filename.jar para1, para2 para3", 2 3 para1 is synonymous with three parameters obtained from the database "
  
  I get the value of the database as follows:
  String para1 = "{{db.caseName.para1}}";
  String para2 = "{{db.caseName.para2}}";
  String para3 = "{{db.caseName.para3}}";
  
  However, it does not work and it looks that this string has the database cannot used as settings in 'java-jar filename.jar para1, para2 para3.
  I'm trying to assign the value directly as: String para1 = 'PARA1 '; String para2 = "PARA2; String = 'PARA3; then can run 'java-jar filename.jar para1, para2 para3' and this can work.
  
  So, how can I use parameters got in 'java-jar filename.jar para1, para2 para3' database successfully?
  Thank you very much ^ _ ^!
  
  Kind regards
  Angyoung

  Hello

  You can use eval() for this. That is to say. Use the following method

  String para1 = eval ("{{db.caseName.para1}}");
  String para2 = eval ("{{db.caseName.para2}}");
  String para3 = eval ("{{db.caseName.para3}}");

  then run "java-jar filename.jar para1, para2 para3.

  Kind regards
  Dembélé M