Pinting/sharing, error 2114. The printer cannot be used by others on the network. Event ID: 315
In my event log, I get the message "the print spooler could not share printer HP Deskject F2200 series with the HP Deskjet F2200 shared resource name.
series. Error 2114. The printer cannot be used by others on the network. Event ID: 315. "I have only one printer, and I'm not on a network share. I only turn
It's on when I need to use it. Why I get this error? It would cause my computer to freeze?
BJB
Hello
I suggest you to refer to this link and check if it helps:
It will be useful.
Tags: Windows
Similar Questions
-
When my printer stopped working because of error messages about "printer cannot communicate with the computer" (from "twisted into the USB pins?), I tried to change to 2nd USB port without success. I tried a new cable; that did not help.
Then I uninstalled and reinstalled my Lexmark printer and changed the error message. Now, the printer does not work because "the USB device is not recognized."
I tried to update the chips; Use 1 USB port; and using the old cable, all this without success. I checked the connections of the cable to the printer and the PC and turn on the printer and goes off; I'm out of ideas. Any other suggestions?
Hi ChristineKrause,Here are some links that might help you:
Advanced troubleshooting tips for General USB for Windows XP problems
Try the steps listed in the items mentioned above and see if that helps you solve the problem.
-
After installing IOS 9.3 for Ipad3. I can't activate iPad by Apple ID display error meassage «e-mail cannot be used to unlock the iPad»
If you see the lock of Activation screen after update your iOS device, you want to try the following:
-Restart your iOS device and try to connect again.
-Visit appleid.apple.com and log in to ensure that your password is correct. If you change something here, only to change your password. Try to connect again on the iPhone.
-Connect on iTunes on a computer and put your Apple ID and password when it prompts you (as it did on your iOS device).
-ICloud.com check in the settings. If you see your iOS device listed, remove account (do not erase or hit lost mode). Restart your device and try to reconfigure.
-These measures should solve most of the problems. For someone else, you will need to contact Apple (1-800-MY-APPLE or getsupport.apple.com).
I hope that helps!
-
Can embed you fonts in a pdf file after that the pdf has been created? I received a PDF of an another designer, made a few minor corrections, and now the printer cannot be used because the original pdf didn't have all fonts embedded. Any ideas?
Use the Acrobat Pro preflight!
To incorporate the missing fonts in Acrobat Preflight profile will incorporate the missing fonts in your PDF file assuming that:
(1) the fonts in question are installed on your system and
(2) the police themselves is not protected against the incorporation (they can at least see and print incorporation.
-Dov
-
Error 1222: The network is not present or not started
I have a home network with two computers. I've implemented such that file, internet and printer shares, a set-up that has worked well for a while. All of a sudden, I could not access the computer on which the printer is connected to everything. This computer, however, was still able to access the internet, but not able to access its own location on the computer network. I ran the Diagnostics of the network and the convenience of homegroup without result. I discovered that the Server service is not running and tried to start, but rather, I got the error "Windows could not start the Server service on Local computer. Error 1222: the network is not present or not started. "LAN diagnostics donnГ not answers. After the Server service does not, I cannot share files or printer, but can somehow get internet to share.
Help, please. Thank you
Hello
Maybe this can help, http://support.microsoft.com/kb/170336
Jack-MVP Windows Networking. WWW.EZLAN.NET
-
Original title: what is NTFS?
When you try to do a full up, I get the error msg "this disc cannot be used to store a picture Windows complete PC backup because it is not formatted with NTFS. My OS is Windows Vista Ultimate Edition.What is NTFS?
What type of disc to I use to make a backup?
Hi Heather_604,
There are two ways you can do: you can convert the external hard drive to NTFS, or you can format the external hard drive to NTFS.
Personally, I suggest that you format the external hard drive, but this will remove all data from the drive. Temporarily, you can copy what is on the hard drive on your C: drive if you have enough free space (or DVD) - once the external hard drive is formatted NTFS, you can copy everything back.
Formatting disks and drives
http://Windows.Microsoft.com/en-us/Windows-Vista/formatting-disks-and-drivesExamine everything under view all. also check How can I add a new HDD? If Vista not recognize the external drive in see computer management - disk, the link create and format a hard disk partition management:
Create and format a hard disk partition
http://Windows.Microsoft.com/fr-FR/Windows-Vista/create-and-format-a-hard-disk-partitionIf you want to convert the external hard drive to NTFS, see the link in my original answer and:
Convert a FAT32 to NTFS disk in Windows Vista
http://News.Softpedia.com/news/convert-a-FAT32-disk-to-NTFS-in-Windows-Vista-51792.shtmlConverting an external hard drive to NTFS
(see r. v. White second after correction of typo in his post punch)
http://Forum.Soft32.com/Windows/convert-external-hard-drive-NTFS-ftopict341077.htmlIf you convert the drive to NTFS, I always recommend that you copy the existing data, as I described for the formatting of the disk, just in case...
Kind regards
-
Dear Sir
Migrated domain users are needed to access shared folders on the network with AD username old or need to share with the new AD IDI am in a field & I'll migrate with a domain name.EX: now I'm in the field of the AAA tomorrow my domain name will change to BBB. User accounts are created in two AAA & BBB and the two domain user IDs are different.data servers are also migrating with the new domain.is it possible to access share with the old user id folder in new field or both to share the files again with the new user ID Active directory.Kind regardsChauvet J.Hello
The question you have posted is related to professional level support. Please visit the below mentioned link to find a community that will support what ask you:
http://social.technet.Microsoft.com/forums/en/category/WindowsServer/
-
Windows 7 Pro: shortcuts to shared folders on the network Office disappear randomly.
Hello
Windows 7 Professional: one of my users creates shortcuts on his desk to the shared folders on the network. Randomly, these shortcuts simply disappear. We have no login script that will remove these shortcuts.
Everyone knows the same problem and has a solution?
Thank you.
Hello
Thank you for the update.
The question you posted would be best suited in the TechNet Forums since you are connected to a domain network, we recommend that you post your question in the TechNet Forums to get help:
http://social.technet.Microsoft.com/forums/en-us/category/w7itpro
-
Shared folder on the network publicly without using homegroup
I try to share a folder on my network so that anyone can access and modify files in this folder. But I also have other actions, that they do not have access to the. Homegroup is not a viable alternative. The only solution I've seen in the past is to create a connection on my PC to allow users to open a session, however, allowing them to open a session locally is not an option either.
Any suggestions?
Hi Dave7
You can try the following to see that you can allow users to access the share using anonymous authentication:
- Right-click on the folder you want to share, on the sharing tab note the network path
- Now go to start and find "Local security policy" and press on enter
- "Local policies", then click on Security Options
- Find the policy: "network access: Everyone permissions apply to anonymous users" and set the setting to "Enabled" and click OK
- Now find the policy: "network access: shares that can be accessed anonymously ', enter the network path you noted in step 1 in the text box, and then click OK
- Now open command prompt, you can search for cmd in start search and press enter
- Type the following command and press ENTER: gpupdate/force
- Now you should be able to access the share without the need to enter credentials, but if they try to access on the other hand they will be invited with the connection dialog box
If please test and let me know if it works, or if you have any problems, as I suppose you are a local administrator on the computer.
Please note that this will reduce security and can open an entry point that could easily be exploited, as anyone on the internet can potentially access share and emptying of viruses and trojans on it.
Thank you
-
Cannot access any shared folder on the network of windows 7 Professional
HelloI have a very strange problem.
I have a home network with 4 computers.I can share files from any computer to the other.Recently, I bought a new laptop Lenovo E530 in with Windows 7 Professional installed on it.The problem is that I can't access any shared folder on my home network by '\\com-name '.I cannot yet access the folders on the computer that is shared from the inside, by specifying there name with the prefix "\".However, I can ping or even make remote desktop on other computers on my network.I can also access shared folders on my Windows 7 Professional from other computers.Looks like there is something wrong with the configuration of my OS from Windows 7 Professional blocking access to any shared folder on my network.I get the following error message:Windows cannot access \\comp-nameCheck the spelling of the name. Otherwise, it could...Error code: 0 x 80070035The network path was not found.I tried to use the button to diagnose, but without success.Help, pleaseDudi.Hello
I suggest you try all the steps from the following link:
Sharing of files and printers
http://Windows.Microsoft.com/en-in/Windows/sharing-files-printers-help#sharing-files-and-printers=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1See also: File and printer sharing: frequently asked questions
http://Windows.Microsoft.com/en-in/Windows7/file-and-printer-sharing-frequently-asked-questionsHope this information is helpful and let us know if you need more assistance. We will be happy to help.
-
Error 907: This connection cannot be used with the VZAccess Manager
original title: error message appear on my screen
I get this error message appear on my screen every two seconds:
"This connection cannot be used with the VZAccess Manager.Error 907 "
Hello
Disable/remove your Verizon Wireless software or contact Verizon for help with this error. Posts like this occur generally when third-party utilities are used to manage connections and issues must be resolved by the Distributor, because they are often specific to that software.
Verizon support suggest that you go in the Options Internet/Control Panel and on the Connections tab, check the option "never establish a connection" is selected.
Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org
-
Unknown error in the network and sharing Center
When I opened my network and sharing Center where the active networks would be just said
'Unknown '.
and
"The account specified for this service is different from the account specified for other services running in the same process"
If I open Services.msc and check the list of networks and Network Location Awareness service, both are on automatic and both connect as a network Service.
Network list service does not work and does not give the error:
Error 1079: The account specified for this service is different from the account specified for other services running in the same process
I'm connected to my home network and have internet access and also a local access to other computers, it's just not appearing is not on the network and sharing Center.
A result of this is that some of the metro apps don't report any internet connection and will not start. I currently now disconnected my microsoft account on the computer and use a local account, but the problem is still there.
I also tried
netsh winsock reset
from an administrator command prompt but no change.
Can anyone help?
Hi Andrea,
Please keep us updated.
This can be shown because of missing or corrupted system files. This is why I would recommend running the System File Checker tool, which is a Windows utility that allows users to find corruptions in Windows system files and restore corrupted files.
To do this, click Start, type command or cmd prompt in the Search box, right click invite, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
At the command prompt, type the following command and press ENTER:
sfc/scannowNote: Do not close the command prompt window until the audit is completed 100%. The results of the analysis will be posted when this process is complete.
I hope this helps. Please feel free to answer in the case where you are facing in the future other problems with Windows.
-
Cannot access a shared folder on the network of the virtual machine
I don't know if this has been posted before, but I'll provide my contact information and appreciate the help.
I have Windows 7 (32 bit) on the desktop connected to Windows Vista Home Premium (64) on laptop via the cable network. On laptop, I am running XP Pro SP3 on a virtual machine. While I can access a shared folder on the desktop via the laptop, in the virtual when I go to the computers in the workgroup, and even if I see the same files and printers shared on the laptop, when I click on one of them, I get a message that
Desktop\Documents is not accessible. In the virtual, I have connected network bridged with replication verified physical network connection status. On the desktop and portable (host), I can access folders in the virtual (name-letters and numbers). The shared folder on the desktop is shared to everyone. What Miss me?Thank you
Hello
Check out the options to simple file sharing in windows 7
http://www.home-network-help.com/simple-file-sharing.html
response still not accessible
Prakash
-
Error 0x800704cf the network location cannot be reached.
It drives me crazy. I have a laptop Vaio with Windows 7. I see other PCs on my home network networking. If I click on any computer, I get the above message. "When I click on my own computer in the network area, it shows 'users' to 'Public' and: videos" folders. If I click on any of them, I get the above message.
Hello
See this thread and look for the answer posted by Jeffrey Hicks MVP on on Wednesday, February 3, 2010 19:51 check if the solution works for you.
Kind regards
Amal-Microsoft Support.
Visit our Microsoft answers feedback Forum and let us know what you think. -
Original title: errors in the event log 20035, 7023, 7035, 7036
Can't get online with dial-up or actions addapter. verified that newspaper and got codes of Thies. They have to do with rasman and the service control manager. I think I need to reset some how back to the line. Thanks for the help.
Hello
· What is the exact error message you get when you try to connect to the network (the error that comes up on the screen)?
· Who is the manufacturer of the system and what is the model?
· You are using an external modem or a modem internal?
· If he external modem then who is the manufacturer of the modem and what is the model?
I suggest you follow the steps mentioned in the article below.
You cannot create a network connection after you restore Windows XP
http://support.Microsoft.com/kb/329441
Thanks and regards.
Thahaseena M
Microsoft Answers Support Engineer.
Visit ourMicrosoft answers feedback Forum and let us know what you think.
Maybe you are looking for
-
Satellite P100-240 graphics card cutting
Lappie literally just out of warranty & the graphics card is cut.Initially under Vista Premium I was getting taskbar message telling me the graphics card drivers had stopped & recovered? I formatted with a clean install of Vista back on.I've updated
-
Update Service Pack 2 stops at 100%.
Hello there, my Windows Vista installation seems to update, but stops abruptly at 100%. It will not move and complete the update, it just stops. I keep the PC, and I had to preform a system reset cause it was still stuck on the "Configuring updates"
-
Original title: could not find the media to the installation package ' update of Vista SP2 MBR I need to install the Zune software to my windows phone 7 and I get this error message: cannot find media for error code installation package 'Vista SP2 Up
-
Old pc in enclosure hard disk not recognized by the new pc using windows vista
Old pc unbootable. Got a new laptop and want to recover data on the old hard drive. Use a Sweex 3.5 IDE enclosure, to connect the old hard drive via the USB port again mobile. The hard drive is visible in device management, but not in my computer.
-
PowerVault 220 s - no lights on disc 15
Hello I have a PV220S on a PERC 4e/DC (Server PowerEdge 2950, WS2K3 Enterprise SP2 - I don't know how this is relevant, but just in case: robothappy :); 15 drive is not detected, and it does not.) I think that this happens in clustering mode, but I