The motherboard power, reset, and rider LED HDD question
So I bought a new case for my p6620f and there all the jumper cables to the switch on the power and reset, and HDD LED etc and I have no idea where they're going and I can't seem to find online manuals to show me.
http://support.HP.com/us-en/document/c02560084
^ It's my motherboard, any help would be greatly appreciated.
Here's the picture where you can see the image of the pins of the connector for front panel on the system board and its layout:
The front panel connector is for the power switch and the power led on the system hard drive. The connector is marked J18.
Tags: HP Desktops
Similar Questions
-
Aspire v5-122p-0408. The component on the motherboard power button broke and I was wondering if I had to replace the whole motherboard or just that one piece
Hello
For more information about this, please contact Acer Support, ask in the Support Forums or ask your local Computer Repair Tech.
http://community.Acer.com/T5/discussion-forums/CT-p/boards
See you soon.
-
Tecra M9 - will not power on and flashing LED
Can someone tell me where I can find a list of what means the various sequences of flashing of LED on a Tecra M9?
I have one that will not be running at all and the power light flashes a particular model of amber.
Toshiba Tecra M9
PTM91E-04R03TENHello
I think that such a list of error codes for the LEDs are not available. I've never seen such lists on the Toshiba site, I guess they are no longer available to the authorized service provider.
But you can try this: remove the battery and the AC adapter at least an hour. Then connect the two devices again and try to start the laptop.
If it doesn t work an ASP needs to ask for help. They can give you professional help and fix it.
-
I have download a scanned receipt on a Web site and I get the error message "the connection was reset". I downloaded these reception for two years and last week, I had to use a different browser to complete this operation. I log onto the site and make the report, I have to do, but I can no longer download on this site.
Safe mode does not work. However, when I downloaded Firefox laptop everything worked. Any suggestions as to where I should go now. Thanks Fire Fox works on other sites I work with. The download has started working. I think the problem was the website.
-
Please let me know what controls are available for the navigation bar / or where I can change the options for the same. I use Mac OS X 10.6.7
I need to change the settings so that it automatically orients the site.
earlier, if I used to type mozilla he used to direct me directly at mozilla.com but now it loads a search page.
http://search.conduit.com/ResultsExt.aspx?CTID=CT2504091 & q = MozillaHelp, please. Thanks in advance.
Back to Google as your favorite search engine, follow these steps.
- In the address bar, type Subject: config and press ENTER.
- In the filter at the top, type: keyword. URL
- Double click on it and delete everything there is inside (likely Conduit) and replace it with http://www.google.com/search?q=
The URL to add in "keyword. URL"becomes a link in this message, right-click and choose"Copy link location"to copy it to the Windows Clipboard. Then press CTRL + V to paste. You have to type all of this saves.
To reset your home page, follow these steps.
- Go to the site you want to set as your home page.
- Click on the orange button Firefox and go to Options | Options | General.
- Make sure that it says in the first drop 'show my home page'.
- Click on the button called "use current Pages' to set the home page to the one you have on the screen.
-
How to fix the mouse power switch on VAIO VGN-CS115J question?
My mouse on my laptop Sony VAIO VGN-CS115J goes on and out.
It is constantly resetting of the mouse to be recognized by the computer.
All other USB devices are working properly, such as discs hard etc, but keep Mouses to turn on and off.
Symptom: The mouse pointer stops periodically move and it displays a message "Unrecognized USB device" and then, it is recognized again. (this will happen every few seconds, 20 times in about a minute)
I updated the USB drivers and tried several mice on all USB ports.
How can I fix the mouse constantly reset in my laptop Sony VAIO VGN-CS115J?
Friendly greetings,
Jussi Yrjänä
Hello there Zealious!
Please provide the name of the exact model of your laptop. Have you tried to use the USB on another computer?
~ Tim
-
Print the brochure-page editing and print dialog box questions
Hi people,
I have a small organic seed in Southern California company and I am looking to do our first seed catalog using what I would describe as a "zine" format: a letter-sized document that is folded, resulting in a booklet composed of half pages (I don't know if there is a more technical term to do this (, please correct me). I use InDesign 5 and Mac OS X Snow Leopard.
When I started doing the document, it seemed logical to start with my page as a 'half letter' size, because I had read about the "Print booklet" feature of Adobe that would automatically print the pages in the order appropriate for folding. After doing a few pages of my catalog, I decided to do a test run this function, as I suspected things may be more difficult that it seemed. I ran against two problems while doing so, and I hope someone here can help give me an idea.
The first problem is that I can't get the pages to impose properly by adopting a system of alternative numbering on the pages themselves. To explain: I chose '2-top stitching horse' in the settings of the printed booklet. I have a paper of 10 pages of 5 blocks spread. In the menu document, I put my layout to start on page 2 so that gaps appear side by side in the pages. However, I also want page numbers on my zine so I started a new section number (which I gave an A prefix) on what is ultimately the fourth page of the layout. This numbering comes as '1' on the fourth page and produced consecutively from here (pages 4-10, on the spread in the page layout area are labeled 1,2,3,4,5,6,7 on the pages themselves). It seems that booklet printing think my second section (A) on page 1 is where it should start stitching horse formatting. The help section on booklet written print Adobe, 'If you have split the document into sections of page numbers, you should enter section page numbers (for example, Sec2:11) "in the range field.". However, they recommend only do that if you want specific pages to the format ranges, while I would like to format the entire document. However, I tried to do that, suspicious that the first three pages were not formatted properly. However, I could not yet find a way to clarify my section A in the range box. I typed in things like "SecA:1" but I get a message that says: "one or more of the specified pages aren't valid page names." I note when I stripped the formatting of the document the print booklet feature requires the pages in the correct order. Thus, this problem is not the end of the world. However, what I lost is the ability to have numbers of pages printed on my document, unless I want to manually add to each page (and then having to deal with reformatting if I ever add or remove pages of the document in the future).
The second and more important problem that I have is to get the pages to print even close correct. I have a printer Brother HL - 5340 D laser has a two-sided feature, and I thought there would be a way to print just two pages of my catalog (half-letter pages) on a letter page size, side by side, double faces and in the right order for folding. After trying a number of different options (by changing the page size and the page orientation in the print area), I was not able to get the printer to print these pages, with success, or even in the right size and orientation - or even on the set of law, indeed. Once I played around with all the settings I managed to pull of "Tray1" (and created a preset in the OS X print settings), but I can't understand how I got this opportunity to stick. Of course, Adobe recommends using their own printer on the Brother driver dialog box, but duplex, for example, is impossible without ebb in the print based on the OS setting. I turned, something that has worked well with other InDesign documents I created. In this case, however, I have not been able for duplex printing to work.
I wonder if there are conflicts being created between two printer settings, or maybe I just made a mistake starting my catalog with a letter paper size "half" and now try to print two of my pages letter half on a sheet of letter-sized (and double-sided, at that). As a neophyte InDesign (six months experience) I still wonder if there is something really obvious that I'm missing.
Does anyone have a picture of my situation?
Waiting patiently. Thanks people...
Quin
chirrchirr wrote:
Peter,
See the screenshot above (two positions to the top) where I show the "spreads" I made in the document. I have 56 pages in 29 spreads
The number of "spreads" appearing in the pages Panel is misleading since several ov them don't have only one page. I do not see the whole Board, of course, but my guess is that all the "spreads" we do not have two pages. Normall is the first and the last spread that are singles, but you have done strange things with the numbering.
In any case, is printing print booklet 28 pages. The only way that can happen if additional blank pages are added is if you did not include the original White you have created. You have to go into setup to display the print dialog box and select include blank pages there.
-
I have
Your phone can not be resolved. Apple will offer you a discount on a replacement.
-
Use the laptop power adapter and remove the battery?
I want to preserve the life of the battery by removing the battery and the adapter to power the laptop. What is a good/bad method? Please advice.
Hello
I do the same thing. I am the owner of the Satellite P20 and removal of the battery is very easy. I do every time if the unit is connected to the power supply. It is certainly not bad method.
Good bye
-
I put a password in a computer and a power failure the stop before I could create a floppy or Flash-back to the top. Any solutions would be appreciated.
The computer is running on Vista Home
Hello
If you know your password but vista does not read the information below
http://support.Microsoft.com/kb/940765
If the front is not the case read this:
I'm sorry, but the strategy of microsoft in these forums is that without assistance will be given about lost or forgotten passwords
read the policy at the link below
-
Why my internet always comes up with "the connection was reset" and I can't load anything?
We have 3 laptops in my house and me seems to be the only one who does, I don't know why it does that I didn't modify parameters on this at all and I thought I might be, but everything is always exactly the same as when I got it.
Hello
1. you are using a wired or wireless network?
2. do you use Internet Explorer browser to surf the Internet? If so, which version?
Method 1: reset the router and see if that helps:
Note: To help you reset the router, you can consult the manual that came with the router or the router contact manufacturer.
Method 2: See the article mentioned below:
Using the troubleshooter from network in Windows 7:
http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7
Method 3: Temporarily disable the antivirus software and see if that helps.
Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
Reference:
Disable the antivirus software:
http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
Method 4: If you use the Internet Explorer browser, you can also try this.
Reference:
Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.
How to optimize Internet Explorer: http://support.microsoft.com/kb/936213/ro
-
the letters appear so big.how can change the font?
View > Zoom > reset helps get a normal font size?
-
Hi can anyone help, I am with AOL, I just switched to the Platinum service, I configured my router netgear DG834G wireless and that's all works fine, but if I turn the computer then turn it back I cannot get a connection and when I ask her to fiind wireless networks the computer tells me that windows does not support my wireless network and I must have another program running , but I didn't so I have to reload the settings again for windows to set it up. What happens whenever I turn off the computer. AOL are without help please someone has any ideas - I use windows xp service pack 3
Hi Timstimpson,
It is possible that the Automatic Configuration Windows wireless service is not configured to run at startup.Try the following:1. click on Start and run
2. type in the box to run services.msc
3 scroll down and look for the Automatic Wireless Configuration service4. double-click on the service and make sure that the Startup Type is set to Automatic
Let me know if it works for you!Cody C
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
When I'm running my cursor cannot be controlled. When I shoot taking everything goes well with the pad and cursor
Hey, it seems to be ok now! Thank you
-
HP LJ 200 noisy m251nw the turning power on and off
I have two printers laserjet and old and new. The new one seems to work fine for printing, except that it's much noisier than the old for a few seconds during start-up and shut down. The old man is a laserjet 6 p, and he never makes almost no noise, so I was just wondering if the series of POP or click I hear is normal, whenever the m251nw laserjet 200 turns or off. I think it's maybe normal is always the same noise, but I've always wanted to post on this topic to be sure.
Thanks for providing the mp3 of the printer in the market, Hythloday.
I found the Laserjet 200 M251nw in one of our labs and it is that same exact sound turning on the printer and turn it back on. If I like it's a normal noise since both units are the same.
Thanks again.
Maybe you are looking for
-
Family shared &; Apple pay payments
I got iCloud family configured sharing with my partner for some time, with my main flow configured as a shared payment card. I changed since that to my debit card to our account to join. I pay Apple set up on my iPhone and only linked it to my main d
-
I want all se do not show upward on emails
When I send an email to many people I send to: (myself) and CC: for all others. I do it so that all e-mail addresses are not broadcast to everyone, just mine.
-
I want to hide the icons in the bookmarks toolbar.
In the 29 Version of FireFox the 'folder' or 'link' icons in the bookmarks bar are stuck VISIBLE. I just want to hide/remove icon, showing that the text I had before. The icons are essentially meaningless and I need them to be visible. Please suggest
-
Original title: HELP! Problem 'open with '. I also have a problem of 'Open with', that has happened before. I open a file with the Microsoft Office Picture Manager program. Now I can not escape and it's the tilt all my documents of the image. Even th
-
HP 4500 - a few words not printing on paper
I just installed the HP4500 printer wireless to my laptop. Sony Vaio - Windows XP. Everything seems to work... The book feeds when I print The color and the alingment tests all work The HP scan & print doctor says system works The cartridges have i