The NAC authentication login page

Similar Questions

• The NAC - OOB L2 authentication login page - does not appear!

  Hi all

  We have 2 managers of the NAC and NAC 2 servers. We have a failover solution. Our deployment is OOB layer 2 virtual Central Passage. We have successfully added the SIN in NAM and we did the requirements in NAM as a mapping setup VLAN (starting at vlan no reliable 913 to the vlan trust 910), adding managed subnet, change profile, profile, adding switches (cisco 3560) to NAM, the roles configuration on the user, the local users and also port user login page.
  Then, we tested it by connecting the PC to port controlled on the switch.
  The controlled port configuration was VLAN 910 and after connecting the PC, it is converted to 913 VLAN then we have successfully obtained an IP address from dhcp that is configured on the switch but the authentication login page appeared! and also, when disconnect us from the PC of this port, the configuration is not passed to vlan 913 to vlan 910 then manually change each time to do our tests.

  Do so that the login page appears and also automatically NAM to change the configuration of the port after having disconnected from the PC?

  Thanks in advance.

  AD SSO is supported with the Windows 2003, but with 2008, only single server is supported and which should also be 32-bit. 64-bit servers are not yet supported.

  HTH,

  Faisal

• Create the Mikrotik Hotspot Login Page

  Hello

  I want to create the Hotspot Mikrotik Login Page in Adobe Muse. How to create Mikrotik Hotspot Login Page in Adobe Muse?

  That would be a form of normal web being sent to the hotspot server / router. It basically has nothing to do with the Muse of all beyond to design the layout of the form. The rest of the info is to be implemented according to their recommendations.

  Mylenium

• URL of the page of the NAC authentication

  Hi all

  is there an option to configure the ip address and domain FULL name both to the URL for the authentication of the NAC on the basis of the vlan?

  Thank you

  Laxman,

  It is not possible. Redirection occurs with all that you have configured as the name of your certificate, so if cert is an IP address, the redirect that happens to this IP address. If cert is a name, redirect that happens. You can't have two URLS defined for redirection.

  HTH,

  Faisal

• How propate error message OID to the OAM SSO login page

  Hello
  
  I set up OAM with OID as the data store. I have a password policy in the OID such that if the user enters a bad password more than 3 times, then the account is locked for a specified interval. I would like to know how to tell the user (via the SSO login page) that
  (a) he entered a wrong password / authentication failure
  (b) the account is locked
  
  Thank you
  Joe

  You can create an authfailure.html page that displays a name of user and password not valid message with the login page and mention this url unless authorized redirects URLs in the political field. In addition, mention the redirect challenge form authentication url based in http://webserverhostname:port

• Impossible to go to the WiFi router login page

  I use a netgear WiFi router. WiFi works great, internet works fine but I can't go to the login page without connecting the Ethernet cable. I should connect with cable to change the password and other things.

  No shot and tests... I unchecked the isolation of WiFi area and the problem resolved. I found it myself.

• I tried to load the hotmail repeatedly login page!

  I would like assistance with loading and you connect to my hotmail account.  It seems that I can't even login page more often.

  I also had problems with my ISP email account, by which I need to change my password.

  Any suggestions would be welcome.

  We run with McAfee internet security and it is up to date.

  See you soon,.

  Wendy

  Hello

  Contact them for problems with your password for your ISP

  and please repost your question in hotmail in the hotmail link below forums

  http://windowslivehelp.com/product.aspx?ProductID=1

• BPEL Application Server Control 10.1.3 - oc4jadmin username being exposed in the em console login page

  Hi all

  Security problem - we run Oracle BPEL 10.1.3.  When the Enterprise Manager Application Server Control login page displays the oc4jadmin username is displayed/presentations.  I was not able to find where this configured.  How can I keep the username oc4jadmin displayed on the login page?  Is - this configurable?

  Thanks in advance.

  Any guidance would be helpful

  What I discovered, Oracle has identified this as a bug.

  Bug 7477358 - NEED TO GET DEFAULT "OC4JADMIN" username, NO ISSUE ON THE LOGIN PAGE

  If the customer does not mind moving to javasso, this could be a workaround. Oracle Doc ID 397180.1

  I managed to implement javasso for asconsole; the javasso login page has no username displayed oc4jadmin when the login page is displayed.

• (original username) data of the unsecured application login page

  Hello
  
  How to store data in a backing bean and restore in an another backing bean?
  examples please.
  
  the anecdote is below:
  There are two respective jspx support pages in grain.
  one is not secure logon page, the second secure page 1.
  I need to pass the user name, taken to the login page, to page 1.
  When the connection data of the user is substituted so that I have main access through securitycontext
  but I can not store the original data is entered at the opening.
  the problem is that the bean of the opening of the session backup timelife is backing bean, it saves the State between calls.
  
  Thanks in advance

  Yes would be the right method, because it is a card...

  Timo

• lack the sign in seal (ensuring the validity) for the Yahoo email login page

  The login-seal is an option that you generate for sign id and password for yahoo emails. It ensures the authenticity. It appears so, except on firefox. I'd appreciate your comments please.
  Thanks in advance...

  See also:

  The problems of connection attached: https://help.yahoo.com/kb/yahoo-account/SLN2676.html

• Customize the Oracle discoverer login page

  Hello
  
  Try to add a password for automatic reset for discoverer page. I would like to know to what extent Oracle allows me to this type of customization. Also any advice on where to start would be great!
  
  Thank you
  KK
  
  Published by: 848492 on March 30, 2011 18:50

  Hi KK
  Most things are possible, especially for the Viewer as Viewer using UIX files to control the interface. I don't know exactly the one controlling passwords, but it probably wouldn't be hard to find.

  Word of warning however: Oracle is not customers of support or sanction change UIX files so all what is done must be saved first in case you have problems.

  Take a look * $ORACLE_HOME\j2ee\OC4J_BI_Forms\applications\discoverer\discoverer * where $ORACLE_HOME is the place on your application of discoverer server where discoverer more and observer to have their home.

  There are a number of files in there related to passwords, namely: CECEnterPassword.uix, CECPasswordChangeWillExpire.uix, CECPasswordExpired.uix, CECPasswordWillExpire.uix, ChangePassword.uix, EnterPassword.uix, Password.uix, PasswordChangeWillExpire.uix and PasswordWillExpire.uix. The word password also exists in struts - config.xml in * $ORACLE_HOME\j2ee\OC4J_BI_Forms\applications\discoverer\discoverer\WEB-INF *.

  There are a few notes on the Oracle Support on changing some settings in the uix files and these are assumptions they are published by Oracle, but one should always be careful.

  I hope this helps
  Best wishes
  Michael

• Why the Firefox sync login page is has a bad signature?

  It doesn't let me connect on a new profile on a laptop that already have Setup sync on my other profiles.

  URL on: accounts? entryPoint = menupanel

  Please help

  What security software do you have?

  There are security software such as Avast and Kaspersky and BitDefender and ESET which intercepts secure connections and sends its own certificate.

  If you cannot inspect the certificate by "I understand the risks", then try this:

  Open the "Add Security Exception" this URL chrome by pasting into the address bar of Firefox and check the certificate:

  • chrome://pippki/content/exceptionDialog.XUL

  In the field of location of this window, type or paste the URL of the Web site.

  • retrieve the certificate via the button 'Get certificate '.
  • Click on the "view..." button. "to inspect the certificate in the certificate display

  You can check details such as the issuer and the certificate chain in the Details tab of the certificate display.

• The Oracle Applications login page throws an error message in R12

  Hi all

  Below, I see the error in the browser, when I try to access any Oracle Applications.

  In IE8

  "Could not generate the redirect URL. Exception: oracle.apps.fnd.common.AppsException: oracle.apps.fnd.common.PoolException: Exception creating object that can be aggregated. »

  In Firefox

  " 500 internal Server Error

  Servlet error: an exception occurred. Current application deployment descriptors do not allow for the inclusion in this response. Please refer to the application for more details log. »

  EBS:R12.1.3

  DB: 11.2.0.3

  The DB and Applications are on different nodes.

  We are seeing this problem after encryption earpiece on the side DB is after the addition of some settings in the file 'sqlnet.ora', the problem is solved after the restoration of the old configuration (sqlnet.ora), but we would like to have this encryption on the side DB. If this is the case how?

  Settings in the file sqlnet.ora, the origin of the problem:

  SQLNET. CRYPTO_CHECKSUM_TYPES_SERVER = (MD5)

  SQLNET. ENCRYPTION_SERVER = required

  SQLNET. CRYPTO_SEED = "#"

  SQLNET. ENCRYPTION_TYPES_SERVER = (AES256)

  SQLNET. CRYPTO_CHECKSUM_SERVER = required

  Thank you

  Moore

  The question be resolved after application "Unable to log in to the control Grid database when ASO is configured on the database (ID of Doc 854293.1)"

  Thank you

• How to manage the list of languages in the oracle bi login page?

  Hi all!
  
  Can someone explain in detail, how 'select language' in the drop-down list is filled? How to exclude two languages in the list BI 10 g?
  It is well documented how to add languages, but it seems to not work in reverse. In other words, removing l_xx files and modify the .xml files do not help.
  All I see now is this list is populated by < input sawm:param = "3" > of a kmsgLogonLanguageForm in logoncontrolmessages.xml informed, but it is not clear for me, how it works in detail.
  
  Any help will be appreciated!
  
  Thanks in advance!
  
  A.K.

  In the instanceconfig.xml file, change the following tag:

  AR, cs, da, el, en, are, fi, fr, hr, hu, it, iw, ja, ko, nl, no, pl, pt, pt - br, ro, ru, sk, sv, th, tr, zh, zh - tw

  -Laurence.

• Error in the worklist BPM login page

  Hi Experts,
  
  I created a bpel process that calls Task Manager to approve or reject the request for leave. I ve successfully deployed the bpel process and also able to test approve or reject the request for leave. But I am faced with an error when I am clicking on the number of the task which is...
  
  
  Not found
  
  The requested URL /default/Human_task3/1.5/LeaveRequest/LeaveRequest.jsp was not found on this server.
  Oracle-Application-Server-10g/10.1.3.1.0 Oracle-HTTP-Server server localhost port 80
  
  I ve tried for almost 2 hours but not able to solve this problem. I need your help please suggest me to fix this.
  
  Thank you.

  It is a different version, your mistake is looking for 1.5 and it deploys 1.0

  10 seconds seems also very fast, I don't know it does something.

  see you soon
  James