The name property using

Similar Questions

• What is the dynamic property used to retrieve the IP address of the CV?

  What is the dynamic property used to retrieve the IP address of the CV?

  If we get as below as we get VM kernel Port Group

  HostSystem - & gt; HostListSummary - & gt; managementServerIp

  But how do we get Service Console port group?

  Let me know thanks in advance.

  Hello

  Is your VC a harware installed or is installed in a virtual machine?

  If it is based on a material maybe you can retrieve it with

  ->->-> HostNetworkInfo HostNetworkSystem HostConfigManager HostSystem (or config)

  There is a portgroup HostPortGroup entity, but I'm a noob and never did.

  Maybe it helps.

  Christian

• Error: Error #2078: cannot modify the name property of a Timeline-place object.

  Error: Error #2078: cannot modify the name property of a Timeline-place object.
  to flash. display::DisplayObject / set name()
  at RonaldTest_fla::MainTimeline/frontWheelLoadComplete()

  The code that triggers this false error is the following:

  ------------------------------------------------------------------------------------------ --------------------------------------------------------

  var frontWheelLoader:Loader = new Loader();
  frontWheelLoader.contentLoaderInfo.addEventListener (Event.COMPLETE, frontWheelLoadComplete);
  frontWheelLoader.load (new URLRequest ("FrontWheel.png"));

  function frontWheelLoadComplete(event:Event):void
  {
  var loadedImg:Bitmap = new bitmap;
  loadedImg = event.target.content;
  loadedImg.name = 'My Image loaded';          Online listening
  var kontainer:MovieClip = new MovieClip();
  kontainer.addChild (loadedImg);
  addChild (kontainer);
  }

  ------------------------------------------------------------------------------------------ --------------------------------------------------------

  Any ideas?

  Kind regards

  Ron

  The problem is that this charger adds that the information of an image loaded as an instance.

  If you want to change the name... Get the the bitmap data var BitmapData: BitmapData = Bitmap (event.target.content) .bitmapData

  and then var image: Bitmap = new Bitmap image (data); Frame.Name = "Name"

• How can I delete my old username of email? It's a pain to have to check that the name is used whenever I have send an email!

  I forgot my password at one point so l had to create a new e-mail with a new password, but every time than email which is often and usually in a hurry he's have to don't forget to click on the name of active email or my email does not get sent because the old disabled/address is applied and my email is lost? Sorry, my question is so trivial compared to all of the techniques out there but l am a dinosaur! l

  I'm moving post you on the forums of Windows for emai/networking, but if you are referring to Windows Live Mail, you belong here:

  Help and support Windows Live Mail (downloaded from http://download.live.com) can be found here - http://windowslivehelp.com/product.aspx?productid=15

  -steve

• Is it possible, using javascript, to copy and rename an existing document?  The copy I have managed and resized the artboard according to my intentions; but I think that the .name property is read-only.  Should I wait until it's time to save him?

  post an excerpt from your code so we can see what you have so far.

  I think that what you are looking for is:

  var doc = app.activeDocument;
  var fileName = doc.name.substr(0,doc.name.lastIndexOf('.')) + "_dispro.pdf";        //extract file name and add dispro
  var myFolder = Folder("/C/new");      //Folder to save to
  var myFile = new File(myFolder +"/"+ fileName);        //Full File Path
  
  saveFileToPDF(myFile);
  
  function saveFileToPDF(myFile){
      //Setup Save Options for PDF
      var saveOpts = new PDFSaveOptions();
      saveOpts.compatability = PDFCompatibility.ACROBAT6;     //upped this to ACROBAT6, was at ACROBAT5
      saveOpts.generateThumbnails = true;
      saveOpts.preserveEditability = true;
      //
      var originalInteractionLevel = userInteractionLevel;        //save the current user interaction level
      userInteractionLevel = UserInteractionLevel.DONTDISPLAYALERTS;      //Set user interaction level to suppress alerts
      doc.saveAs(myFile,saveOpts);        //Save File
      userInteractionLevel = originalInteractionLevel;        //Set user interaction level back to original settings
  }
  

• Retrieve the Name of the tag property

  I'm definitely a novice PowerCLI. However, I have a script which is heavily borrowed from http://www.vstrong.info/2013/10/18/vmware-powercli-script-to-query-virtual-machine-events/
  

  What I would like to make in addition to the values that are retrieved, also receive the Name property of the attribute of the tag.

  The script I use now is:

  $vcenterserver = "myvcenter".

  # Check if VMware Snapin is loaded, otherwise, load

  If ((Get - PSSnapin - name VMware.VimAutomation.Core - ErrorAction SilentlyContinue) - eq $null)

  {

  Add-PSSnapin VMware.VimAutomation.Core

  }

  SE connect-VIServer-Server $vcenterserver

  $CDT = get-Date

  Get-VM-name testvm | »

  Get-VIEvent-Types of information - start $CDT. AddDays(-30)-finishing $CDT | »

  Where {'}

  $_. GetType(). Name - eq "VmBeingDeployedEvent" "

  - or $_. GetType(). Name - eq "VmCreatedEvent" "

  - or $_. GetType(). Name - eq "VmRegisteredEvent"} | »

  Select the name of user, Createduserid, FullFormattedMessage, @{Name = "VM"; Expression = {$_.} Vm.Name}}, @{Name = "RC Code"; Expression = {$_.} Vm.Tag}}

  He retrieves the correct values with the exception of the tag for the virtual machine. I also tried @{Name = "RC Code"; Expression = {$_.} Vm.Tag.Name}}

  I can extract the value in a table using the following command, but can't seem to pull the Name property:

  Get-VM-name testvm | Get-TagAssignment-category RCCode | Select-Object - ExpandProperty tag

  Description of the categories of name

  ----                           --------                       -----------

  10031 technical RCCode except...

  Any help would be appreciated, thanks!

  OK, then try this. I have not yet tested, but it should do it for you:

  Select the name of user, Createduserid, FullFormattedMessage, @{Name = "VM"; Expression = {$_.} Vm.Name}}, @{Name = "RC Code"; Expression = {$vm = ($_.)} UMM name); Get-TagAssignment | where {$_.} Entity-like ("$VM")}}} | Export Csv c:\Temp\csv.csv - NoTypeInformation - UseCulture

  The issue was that as the expression of Code RC worked essentially a new request, the $_. UMM name was irrelevant for the entity. Instead I just had the previous $_. UMM name in a variable that is referenced in the cmdlet that followed. Let me know if it works for you.

• Can I get the the display name property through VIX ESX?

  I can't figure out how to get the name property to display a VirtualMachine hosted on an ESX via VIX server.  Is there a property, I can go to get property to get this?

  Yes, it's part of the problem; its currently not supported this is why his is not visible.

• VI to determine the name of the project

  For a real-time application, I wanted to determine, at runtime, the name of the project in which the VI has been "content".  I wanted to get the name of the project (even) under four different conditions:

  • on the host, in development mode
  • on the host, in Run-Time mode (i.e. after being built as an executable)
  • on the goal of RT, development mode
  • on the aim of RT, in run mode.

  It is not so easy.  I figured out how to make the first two (use the name property of the active project development and use the next last folder directory of the Application in Run-Time mode mode), but I'm having trouble to get this information to get the target RT code.  Has anyone tried this before?  Did you?  Advice (or even downright Solutions)?

  Bob Schor

  Well, I figured out, but it's not pretty.  In the previous post, I explained why I wanted to do - here I will explain how I did this.

  There are three main modes, under which Applications can run: development mode (when you are programming in LabVIEW and press the button "Run"), Run Time System (an executable on a PC) and Embedded (code that runs on a target in real time, in the form of executable file or development).  Of these, only one mode of development gives you access live (via the Application, the active project property) in the name of the project file.  My goal is to have the user interface and the RT 'chunks' of the project in real time have access on behalf of the project, the system I'll create will use same code on two subsystems, meaning that it will run on the PC at least once in the mode of development .

  The key step is to create a 'constant VI', I'll call CONST name of the project, which consists of a single indicator of string, name of the project, which "held" the name of the project.  I initially thought to use a Global Variable, but there is a technical problem with that I will mention later.  I didn't use CONST name of the project directly, but, instead, use a 'Get the project name' VI that has, for its single release, the name of the project.

  This VI, when it runs, determines the type of request under which it is running.  If it is something other than the Mode of development, he calls CONST project name and returns its value.  If this is the Mode of development, it gets the name of the project, he returned, but just before leaving, he arranges to be updated programmatically CONST project name when it is called in the future, it will return the name of the project (update).  [Then why not simply initialize CONST project name?  I'm looking for a "generic" solution that will always return the correct value, even if I move to another project and don't remember about the change and change - all I have to do to make it work is to run once in the mode of development.  Who has ever developing code without testing before making the executable?].

  I wrote a VI gave the name of project Save, which does the following: he calls set the timer on CONST project name to define the name of the new project (this works even if we put an indicator), calls to use current default to make the new value "stick" and called "Instrument to save" to save the changes.  The problem is that CONST project name cannot be "running" in the State to use current default work without raising an error.  If the name of the Save project is simply called as a Subvi to get a project name, it will be in the State of operation as it is used in the case of non-development mode to get a project name.  The solution to this witch hunt is to use the asynchronous call with-and-Forget 'spawn' name of the Save project.  Finally, we modify register project name so that it starts with a loop "wait", examinging the State of execution of CONST name project and waiting for it to exit the executing State, indicating that it is prudent to make the change.

  Phew!  But it works!  Oddly enough, when I tried this using a Global Variable instead of my Constant VI, I kept getting errors during execution are currently lacking, but despite the mistakes, the code seemed to run correctly.  I found an article (written for LabVIEW 5!) explaining that it was expected as Globals behavior were always in the State of operation.  Actually, I just realized that I had not tried with the call-and-Forget asynchronous schema, then perhaps a decade later, LabVIEW will allow me to do this using a Global without raising an error...

  BS

• Where can I find the name of the step of the call sequence

  I'm looking for the right place in the RunStates where I found the name of the SequenceCall calling me.

  Someone an idea?

  Hello

  Try NameOf (RunState.Caller)

  or with the API, you can use the Name property of a reference of step

• Toolbox for CreateJS after that export instance names are not available in .name property of objects

  Inside of a loop, I connect an eventlistener click to several objects. Inside the event listener, I need to know which button or MovieClip is clicked on.

  In AS3, I used event.target.name and it seems that createjs is in favour because the .name property exists for all objects.

  But the problem is that the name property is set to zero in all objects. I tried to add inside js .name exported and that works, but to edit this file is not really an option.

  I use this code, for example:

  for (i = 1; i < = 150; i ++) {}

  myMC ["childMC" + i] .addEventListener ("click", onChildClick);

  }

  function onChildClick (event) {}
  Alert ("clicked target" + event.target.name);
  
  }

  Is this a bug or something, or better yet, is there a work around?

  Is there a reason you can't use the iteration children?

  for (i = 1; i<= container.getnumchildren();="">

  container.getChildAt (i) .addEventListener ("click", onChildClick);

  }

• linking the name of the object to the object outside the scope

  In the first function homeL adds the text field "restMenu", when it is called. In another function, the hideTarget method is called and it checks to see if the name of the objects is "instance5" which is the name of homeL. Is it possible to connect a name of objects to the object because I get:

  The supplied DisplayObject must be a child of the caller.

  at flash.display::DisplayObjectContainer/removeChild()

  When I try to use the line in bold. BTW, little code has been removed to illustrate the point.

  function showTarget(obj:Object):void {}

  var i: int = getTarget (obj);

  var restMenu:TextField;

       j++;

  If (I == 0 & & j == 4) {}

  restMenu = getRest ("home"); the rest of the menu shows

       }

  getter.menuObject = restMenu;

  If (restMenu! = null) {}

            if (j == 4) {

  homeL.addChild (getter.menuObject);

            }

  }

  }

  function hideTarget(obj:Object):void {}

  If (getter.menuObject! = null & & obj.name == "instance5") {}

  homeL.removeChild (getter.menuObject);

       }

  }

  You can use getChildByName() applied to the parent of objects to retrieve an object for the name property reference.

• Getting the name of the variable?

  Hi, is it possible to get the name of the defined variable?

  for example

  var description:String = "Some description";
  var variableName = getVariableName(description);
  trace(variableName); // output = "description"
  
  

  Thank you

  You can retrieve the xmllist of the variables (string or otherwise), of any object (for example, the current timeline) using the following function.  each item in the list has a property of type with the name property:

  function variableF(o:Object):XMLList {}

  .variable describeType (o) return;

  }

• Can after get values a RGB pixel, hoe I write the name of the color?

  Team,

  I'm quite new to LabVIEW and I'm working on an application using USB webcam to capture the color of the object.

  So far, it's finished, but now I need to write the name of the color on the screen.

  Please, could someone help identify if IMAQ or Labview have this feature?

  For help in understanding:

  Below you can see the example.

  R = 236

  G = 0

  B = 116

  And the name of the color is pink.

  But the problem is how to get the name by using certain features available.

  

  Thank you.

  Kind regards

  JCG

  There is not such a function, but you can create a pretty easily.

  I would divide each color component by 64 and to get a value of 2 bits for each color.  Combining these (multiply/shift and add) would give you a 6-bit integer, which gives you 64 color combinations.  Create an array of 64 strings with the names of the colors and the correct name indexes.  You need to browse manually the first time and assign a name to each color, but that wouldn't be too bad.

  Bruce

• Why the names of my chapters are not displayed in the table of contents?

  Hello. I use Indesign & DPS simple editing to make an application. In Indesign, I created several different documents that I used to make items that I put together in a Folio.  I saw it using the tool preview Adobe & on the iPad using Adobe Content Viewer. When I select the button table of contents I see thumbnail screenshots of the first page of each chapter, but no text chapter name.  For each of the documents that I used to make items that I named them after the chapter they represent, which is what I thought each chapter name defined.

  The strange thing is that before I did a couple of test folios and they do not have the name of chapter text. So what can I do to display the chapter name in the table of contents?

  Also, is there a way to change change the thumbnail used by the table of contents?

  Thank you

  The answer to both questions is in the Article Properties dialog box. Select the item in the Folio Builder Panel and choose Properties from the context menu. Specify the name of the chapter of "Title" - which is probably empty now. (There is a difference between an article name and a title of the article. The name is used for internal purposes, such as the binding, and the title appears in the application).

  At the bottom of this dialog box, you see a preview of the Table of contents. Click the folder icon and specify a PNG of 70 x 70 that you design.

• ComboBox.name property

  I want a drop-down list box to display a description of the information in the drop-down list box. The name property is a good way to do this in my opinion "comboBox.name = is what I named this box." I have a set ("textDescription") text field to display the name of the ComboBox on MOUSE_OVER, but only on the edges is the actual name of the comboBox control. When, in the Middle, the textDescription displays "instance ID" where # is a real number. See the photos please... Is there some kind of container placed on the drop-down list box or something?

  

  Try changing the line of...

  textDescription.text = e.target.name;

  TO

  textDescription.text = e.currentTarget.name;