The o/s message: no space is available on the device

Similar Questions

• Not the 'Volume Control', I get the message "there are no available active mixer device." ____

  I went through the troubleshooting help utility and when I opened 'Volume Control' I get the message "there no activemixerdevices available". I tried different things, but still no sound can u tell me how to recover the volume control because when I click on it says "there no activemixerdevices available". and when I go to control panel, sounds and audio devices it says no device and grayed out. Please HELP NEED HELP URGENT

  Update:

  I mixer by updating the driver but when I go to the sound and the device it says "No. Audio Device" in the volume tab my speakers work perfectly with my mp3

  If not, do that, if the above does not work:

  Insert your XP CD in your drive. Do not start. Then:

  Start > run > type in msconfig > OK or Enter > click on extract files > then file to extract = sndvol32.exe > then tap your CD-ROM drive as the source > extract to c:\windows\system32 > can Extraxt > crush is required > if it does not re-post.

  See you soon,.

  Jerry

• BlackBerry software after security wipe, BlackBerry link does not identify my backup file as valid for the device

  I had trouble with my Z10, then I backed up with BlackBerry link (which seemed to work creating a file close to 1 gigabyte) then I did a cleanup of security: when I rebooted, I went through the installer until the end, then the element 'Restore' has been enabled from the context menu of the device.

  When I click on 'Restore' after few seconds the bed message "no backup is available for this device.

  Is there a function "no, really, RESTORE THIS FILE ' emergency can I call it? I don't want to have to redownload all my apps and reconfigure the whole device.

  Thanks a lot for the quick reply... I did some additional checking and I confess that sometimes Windows file permissions are strange and mysterious to me... for some reason, Windows Home Server share where I write my backups to was ' write only ' BlackBerry-link point-of-view... when I searched and had difficulties, just pick it up and copy the file, I added my user login to the official list of the users 'Total control' on this file. , and then BlackBerry link found the file very well... now is restoration.

  Sorry for the false alarm, but maybe this will help someone else in the future :-)

• Did not push the file control point (no space available on the device)

  Hello

  I use Proliat HP DL 380 G5.  8 GB (RAM) 61 GB of space

  (RAID0 + 1) second HARD drive has failed while working on a HARD drive at the moment...

  After 20-25 minutes, I can't ping my VM OS which is Windows 7 (active)... and events, I see this error...
  Did not push the file checkpoint at 05:00 (no space available on the device).

  Details of the event:
  	Type: error Description: Error message on WINDOWS-PRTG on localhost.localdomain ha-Datacenter: impossible to reach 5.3 GB of file control point: no space is available on the device. Time: 09/12/2015-10:05:31
  Error stack:
  	Did not push the file checkpoint at 05:00 (no space available on the device). Failed to prepare the file ' / vmfs/volumes/56653def-ccd90fc3-0a42-001b783701ae/WINDOWS-PRTG/./WINDOWS-PRTG-f1e094f5.vmem ': 28 (no space available on the device). An error occurred during registration: 28 (no space available on the device). Impossible to suspend the virtual machine: msg.suspend.error.SUSPEND_E_NOSPACE.
  Additional event details:
  	Type ID: error Build host: 3029758 Target object Type: ComputeResource Type of data center: data center The host object type: HostSystem VirtualMachine object type: VirtualMachine ChainId: 201

  Could you help me solve this problem?

  Thanks in advance

  * Note * I found the solution... Before I used the system of virtualization and Citrix (XENSERVER) there was little different. That's why I'm stuck on a few easy steps... Well, the problem was that I use 61GB HDD, 5.5 GB of memory. When I create the VM I "ve used the maximum size of HARD drive and left no space for the SWAP file. I used 58 GB, and you have to assume + memory size, this means, 58 GB + 5.5 GB...   So who is right for which I didn't have enough space. Hopefully someone will find it useful. See you soon,.

• available on the device file transfer to host using scp 'no space '.

  Hi all, I have 4 hosts build 260247 and I'm looking forward to upgrade using esxupdate at 348481:

  I downloaded the file .zip of vmware server on my PC and when I try to copy this file to the host is not possible, I get the same massage with all the guests: "scp: / tmp/upgrade-from-esxi4.0-to-4.1-update01-348481.zip: no space not available on the device.

  The upgrade-from-esxi4.0-to-4.1-update01-348481.zip file size is 217 MB and when I get the message that I see the copied file on the ESX, but the size is 201 MB. In the guests, I am not able to copy files larger than 200 MB.

  Just to check I copied a (smaller than the upgrade.zip) 50 MB file and it has been copied correctly.

  I've looked everywhere and no luck. I used SCP, diferent ESX host diferent, etc..

  

  After downloading a file in a data store, you are able to access it in the CLI to "/ vmfs/volumes //...". »

  André

• could not power on VM: no space is available on the device. Has no power on VM

  I'm trying to start a guest o/s on an ESX 3.5.0 host, but I get the following error;

  could not power on VM: no space is available on the device. Has no power on VM

  Can someone point me in the direction of why this can be implemented.

  Info. who can help;

  replied the volume of a partner SAN / SAN and he was promoted to a volume. Added the VM to the inventory, disabled, connect to the network at startup.

  Then the message failed to try to turn on,

  Thanks for the reply, free space seems OK.

  Are you sure?

  Use this command (from ESX CLI):

  VDF h

  How much vRAM you have assigned to your virtual machine?

  -

• java.io.IOException: no space is available on the device

  Hello
  
  I have serched on this problem and did not see the solution.
  
  I try to stop my managed server or my server admin and displays the message:
  
  "java.io.IOException: no space is available on the device.
  at java.io.FileOutputStream.writeBytes (FileOutputStream.java)
  at java.io.FileOutputStream.write(FileOutputStream.java:260)
  at sun.nio.cs.StreamEncoder.writeBytes(StreamEncoder.java:202)
  at sun.nio.cs.StreamEncoder.implFlushBuffer(StreamEncoder.java:272)
  at sun.nio.cs.StreamEncoder.implFlush(StreamEncoder.java:276)
  at sun.nio.cs.StreamEncoder.flush(StreamEncoder.java:122)
  at java.io.OutputStreamWriter.flush(OutputStreamWriter.java:212)
  at java.io.BufferedWriter.flush(BufferedWriter.java:236)
  at com.oracle.cie.domain.script.jython.WLSTOfflineInterpreterHelper.createWLSTInitFile(WLSTOfflineInterpreterHelper.java:82)
  at com.oracle.cie.domain.script.jython.WLST_offline.getWLSTOfflineInitFilePath(WLST_offline.java:241)
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  at sun.reflect.NativeMethodAccessorImpl.invoke (NativeMethodAccessorImpl.java39)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  to java.lang.reflect.Method.invoke(Method.java:597).
  
  If I check my HD with the df command, shows:
  
  1 K-blocks used available use % mounted on file system
  / dev/map/VolGroup00-LogVol00 24440700 23179204 0 100% /
  / dev/sda1 101086 23398 72469 25% / Boot
  tmpfs 4095028 0 4095028 0% / dev/shm
  / dev/map/VolGroup00-LogVol02 51573372 10179692 38773880 21% /mnt1
  
  How can I check where is the hd space?
  What can remove in my soa_server?
  
  Thank you and best regards.

  "How can I check where is the hd space?

  You can try the command "du" (http://www.computerhope.com/unix/udu.htm)

  "what can I remove from my soa_server?

  Not much, depending on your deployment, you can try to delete some maps (first of all, it is wise to disable them to see if they can be missed)

  Did you leave the software to install WebLogic and more SOA on your server (also the decompressed files)
  those who would certainly (when it is deleted) give you some respite.

  ------
  Seminar on Cloud Computing - http://middlewaremagic.com/weblogic/?p=7387

• Could not power on VM: no space is available on the device: cannot power on the virtual machine.

  VMware esx ei, 3.5.0 123629

  Physical memory: 64 GB

  Hard drive: 1.63 TB

  7 virtual machines. 5 of them are configured with 4 GB memory and 2 of them with 2 GB of memory. I am able to power on 3 virtual machines with 4 GB of memory.

  When I try to turn on 4th VM with 2 GB of memory, I get this error message "could not power on VM: no space is available on the device: cannot power on VM.»

  I would like to know if this is the limitation of the ESX Server? How should I size the memory for VMS if I want to run every 7 virtual machines to the

  Moreover, given that I have 64 GB of physical memory. Is there documentation that provides a report of the maximum allowed memory configurable

  compared to the virtual memory?

  Thank you

  Ganesh.

  Ganesh,

  Memory reservations are defined based on VM by VM.

  You can allocate more memory to the virtual machines you have in your host (it's not really a good idea to go crazy with the overcommitment of memory, but some level of excessive pressure is used in general).  Memory applied to your VM resources are shares, bookings and VMkernel Swap limits.

  Just to illustrate:

  You allocate 8 GB memory to a virtual computer.  If you take all the parameters by default, ESX will allot a 8 GB VMkernel Swap file in the base directory of your VM (it will have the extension ".vswp") this VMkernel Swap file is a safety net.  Your virtual machine, at this stage, can consume up to 8 GB of memory If physics is available from the host.  If the memory of your host is overcommitted, some of the available memory 8 GB could be allocated on 8 GB VMkernel Swap file.

  If you set a reserve of memory - 2 GB - this means that the vmkernel will still award the first 2 GB of memory used by the virtual machine to the physical memory.  This is not means that the 2 GB of memory reserved is carved off the coast and completely dedicated to the virtual machine.  This means that the vmkernel offers up to 2 GB of RAM to the VM when and if she needs to use it.  It is a guarantee that the memory will be available upon request.  Because of this guarantee of the VMkernel, VMkernel swap file only has to make sure that the 6 GB memory is satisfied (4 GB total less the 2 GB reserved), so the VMkernel Swap file is only 6 GB in size.

  Actions are a mechanism for prioritization and limits are a cap on physical memory ever allocated to the VM.

  You can set up any number of memory for the virtual machines that you want - frankly, overcommitment of memory for ESX is a very good thing, but you must be vigilant about watching your systems if approve you.  If you have 64 GB of RAM, and you only configure your virtual machines to use total 32G, then you lose 32 GB of RAM.  If you allocate, say, 96 GB of RAM (total) to your virtual machines, then you look at a 50% overcommitment.  What to watch in overcommitting memory is application performance (and more importantly - perception of the user of this performance) and also the memory ballooning and VMkernel Swapping activity.  Those who can both will be in graphics performance in VirtualCenter.  I would recommend reading the Guide to management resources for more details.

  Hope that provides an overview.

  Thank you

  -jk

• Load data into Essbase with EAS (no space available on the device)

  Hello
  
  I exported all Essbase database data in a text file with EAS. The size of the file is 1.6 GB autour
  
  I want to load it into the same database on another server with EAS. And each time around 55%, EE gives me the error "No space" available on the device [ServerB]
  
  Here is the configuration:
  -Essbase server: 11.1.1.3 on a linux server has (enough space left for Essbase)
  -Server EAS: 11.1.1.3 on a linux server B (enough space for the data file)
  -EAS Client: 11.1.1.3 on my computer (Windows)
  -Data file: on my computer too
  
  Error messages tells me that there is no space left on the service Regional Server.
  
  Do you know where EE server temporarily load the data file before sending it to Essbase? So, I can increase my file system.
  
  Thanks for your help.

  Why don't you just copy the export more to the essbase server, personally I would not even try to send this amount of data over a network through the Regional service.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• ReadyNAS 104 freezes GUI, reboot (ssh) said: no space is available on the device

  I have a problem with my 104

  After one or two days the admin interface stops working and it stops performing backup jobs.

  If I can ssh into the box and do a reboot it told: "error: no space is available on the device.

  But he there ara severel GB of free space on both og / and / data

  I run the latest firmware.

  What could be wrong?

  / Jacob

  I did an OS reinstall that solved the problem

• I have Vista Home and auto backup and I put in a new DVD-R, even if space is available on the existing DVD

  I have Vista Home and auto backup and I put in a new DVD-R, even if space is available on the existing DVD.

  I have Vista Home and auto backup and I put in a new DVD-R, even if space is available on the existing DVD.

  This response does not answer your question immediately. Just my suggestion for an alternative...

  You lose a lot of time and money ventually, using DVD.

  Less than $100 you will get a very good external hard drive, and you can make a backup of files into it.

  In the long term, it is less expensive than the purchase of DVDs and a pain to store.

• ORA-27063: number of bytes read or written is incorrect, no space available on the device (DB went down due to no space for the temporary file)

  Hi all

  Recently, we encountered a non usual problem with restarting the database because of the ORA-27063

  number of bytes read or written is

  incorrect #IBM AIX RISC System/6000 error: 28: no space is available on the device.

  Database version: 11.2.0.4

  Type of system: SAP database

  Computer type: AIX

  When the investigation we found the full systems 100% file where resided temporary files. So to solve it, we simply added tempfiles on other file systems.

  My question is why the db restarted. As far as I know the TEMP tablespace will throw an error (unable to extend TEMP of 128 segment in tablespace TEMP) every time that

  There is no free space.

  Secondly, to avoid the above, that we began to find the TEMP files from file systems and if found 90% and above then began adding space on all the production servers to avoid

  reoccurance of this issue. Is - this recommended...?

  Thank you

  Hello

  It can be consider as an alternative (using a cron task) or if you watch in em12c could control, so you can host some metrics to check temp space.

  Now, one last thing to consider, it is not advisable to go to increase temp (to be honest, we need optimize queries, why won't they are eating take so much space)

  Third step, you can put a profile (limit) so much space is used, then kill the session so that they eat no place (so that db will not get crashed at least... only session will be started - we can very well with that, instead of hammering db)

  -Pavan Kumar N

• Deployment error - java.io.IOException: no space is available on the device

  Hi everyone, I'm the BPM project deployment, I get the error below. Can someone please guide the solution for the error below. Thanks adavance. oracle.fabric.common.FabricDeploymentException: error occurred while processing file sca_TestSOAEmploy_rev1.0.jar rad before transferring in the store of MDS. Please make sure that the sar file is a valid jar file. : no space is available on the device {rootCauses = []} to oracle.integration.platform.blocks.deploy.servlet.BaseDeployProcessor.deploySARs(BaseDeployProcessor.java:160) to oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.doDeployWork(DeployProcessor.java:203) to oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.doDeployWork(DeployProcessor.java:147) to oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.doDeploy(DeployProcessor.java:134) to oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.process(DeployProcessor.java:100) truncated. check the log file full stacktrace caused by: java.io.IOException: no space is available on the truncated device at java.io.FileOutputStream.writeBytes (Native Method) at java.io.FileOutputStream.write(FileOutputStream.java:260) at oracle.integration.platform.blocks.deploy.CompositeJarExpander.expandOneEntry(CompositeJarExpander.java:238) at oracle.integration.platform.blocks.deploy.CompositeJarExpander.expandJar(CompositeJarExpander.java:118) at oracle.integration.platform.blocks.deploy.CompositeJarExpander.expandJar(CompositeJarExpander.java:96). check the log file full stacktrace

  problem solved. It's a matter of space on the disk.

• iTunes can't restore iphone because not enough free space is available on the iphone

  Hello

  I used to have a 32 GB iPhone that I saved. Today, I have a newer iPhone is 16 GB. I'm trying to restore the last backup from the old to the new. I opened the backup from the Finder file and its size is 20 GB. How to remove the photos and videos that upward in order to reduce the size and get this backup on the new iPhone? Is there a way to tell iTunes restore backup without photos and videos?

  You can not change the way that iTunes restores the backup of a unit. Since you now have a smaller device, you will not be able to restore the new feature of the older device. Your only choice would be to configure the device as new and then synchronize your content individually on the device, such as mail, contacts, calendar, etc...

• Impossible to install El Capitan Mediakit does not enough space on the device

  Impossible to install El Capitan - dialog says:

  

  MediaKit does not have enough space on the device for the requested operation. I have a 250 GB with 53,99 GB available HD. Has anyone else had this problem?

  This procedure is a diagnostic test. It makes no changes to your data.

  Please triple - click anywhere in the line below on this page to select:

  { diskutil list; echo; diskutil cs list; } | pbcopy

  Copy the selected text in the Clipboard by pressing Control-C key combination.

  Launch the Terminal application integrated in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Paste in the Terminal window by pressing the command-V key combination. I tested these instructions only with the Safari browser. If you use another browser, you may need to press the return key after pasting.

  Wait for a new line ending with a dollar sign ($) below what you entered.

  The output of the command will be automatically copied to the Clipboard. If the command produces no output, the Clipboard is empty. Paste into a reply to this message.

  The Terminal window does not display the output. Please do not copy from there.

  If any personal information appear in the output, anonymize before posting, but do not remove the context.