could not power on VM: no space is available on the device. Has no power on VM

Similar Questions

• Could not power on VM: no space is available on the device: cannot power on the virtual machine.

  VMware esx ei, 3.5.0 123629

  Physical memory: 64 GB

  Hard drive: 1.63 TB

  7 virtual machines. 5 of them are configured with 4 GB memory and 2 of them with 2 GB of memory. I am able to power on 3 virtual machines with 4 GB of memory.

  When I try to turn on 4th VM with 2 GB of memory, I get this error message "could not power on VM: no space is available on the device: cannot power on VM.»

  I would like to know if this is the limitation of the ESX Server? How should I size the memory for VMS if I want to run every 7 virtual machines to the

  Moreover, given that I have 64 GB of physical memory. Is there documentation that provides a report of the maximum allowed memory configurable

  compared to the virtual memory?

  Thank you

  Ganesh.

  Ganesh,

  Memory reservations are defined based on VM by VM.

  You can allocate more memory to the virtual machines you have in your host (it's not really a good idea to go crazy with the overcommitment of memory, but some level of excessive pressure is used in general).  Memory applied to your VM resources are shares, bookings and VMkernel Swap limits.

  Just to illustrate:

  You allocate 8 GB memory to a virtual computer.  If you take all the parameters by default, ESX will allot a 8 GB VMkernel Swap file in the base directory of your VM (it will have the extension ".vswp") this VMkernel Swap file is a safety net.  Your virtual machine, at this stage, can consume up to 8 GB of memory If physics is available from the host.  If the memory of your host is overcommitted, some of the available memory 8 GB could be allocated on 8 GB VMkernel Swap file.

  If you set a reserve of memory - 2 GB - this means that the vmkernel will still award the first 2 GB of memory used by the virtual machine to the physical memory.  This is not means that the 2 GB of memory reserved is carved off the coast and completely dedicated to the virtual machine.  This means that the vmkernel offers up to 2 GB of RAM to the VM when and if she needs to use it.  It is a guarantee that the memory will be available upon request.  Because of this guarantee of the VMkernel, VMkernel swap file only has to make sure that the 6 GB memory is satisfied (4 GB total less the 2 GB reserved), so the VMkernel Swap file is only 6 GB in size.

  Actions are a mechanism for prioritization and limits are a cap on physical memory ever allocated to the VM.

  You can set up any number of memory for the virtual machines that you want - frankly, overcommitment of memory for ESX is a very good thing, but you must be vigilant about watching your systems if approve you.  If you have 64 GB of RAM, and you only configure your virtual machines to use total 32G, then you lose 32 GB of RAM.  If you allocate, say, 96 GB of RAM (total) to your virtual machines, then you look at a 50% overcommitment.  What to watch in overcommitting memory is application performance (and more importantly - perception of the user of this performance) and also the memory ballooning and VMkernel Swapping activity.  Those who can both will be in graphics performance in VirtualCenter.  I would recommend reading the Guide to management resources for more details.

  Hope that provides an overview.

  Thank you

  -jk

• ReadyNAS 104 freezes GUI, reboot (ssh) said: no space is available on the device

  I have a problem with my 104

  After one or two days the admin interface stops working and it stops performing backup jobs.

  If I can ssh into the box and do a reboot it told: "error: no space is available on the device.

  But he there ara severel GB of free space on both og / and / data

  I run the latest firmware.

  What could be wrong?

  / Jacob

  I did an OS reinstall that solved the problem

• java.io.IOException: no space is available on the device

  Hello
  
  I have serched on this problem and did not see the solution.
  
  I try to stop my managed server or my server admin and displays the message:
  
  "java.io.IOException: no space is available on the device.
  at java.io.FileOutputStream.writeBytes (FileOutputStream.java)
  at java.io.FileOutputStream.write(FileOutputStream.java:260)
  at sun.nio.cs.StreamEncoder.writeBytes(StreamEncoder.java:202)
  at sun.nio.cs.StreamEncoder.implFlushBuffer(StreamEncoder.java:272)
  at sun.nio.cs.StreamEncoder.implFlush(StreamEncoder.java:276)
  at sun.nio.cs.StreamEncoder.flush(StreamEncoder.java:122)
  at java.io.OutputStreamWriter.flush(OutputStreamWriter.java:212)
  at java.io.BufferedWriter.flush(BufferedWriter.java:236)
  at com.oracle.cie.domain.script.jython.WLSTOfflineInterpreterHelper.createWLSTInitFile(WLSTOfflineInterpreterHelper.java:82)
  at com.oracle.cie.domain.script.jython.WLST_offline.getWLSTOfflineInitFilePath(WLST_offline.java:241)
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  at sun.reflect.NativeMethodAccessorImpl.invoke (NativeMethodAccessorImpl.java39)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  to java.lang.reflect.Method.invoke(Method.java:597).
  
  If I check my HD with the df command, shows:
  
  1 K-blocks used available use % mounted on file system
  / dev/map/VolGroup00-LogVol00 24440700 23179204 0 100% /
  / dev/sda1 101086 23398 72469 25% / Boot
  tmpfs 4095028 0 4095028 0% / dev/shm
  / dev/map/VolGroup00-LogVol02 51573372 10179692 38773880 21% /mnt1
  
  How can I check where is the hd space?
  What can remove in my soa_server?
  
  Thank you and best regards.

  "How can I check where is the hd space?

  You can try the command "du" (http://www.computerhope.com/unix/udu.htm)

  "what can I remove from my soa_server?

  Not much, depending on your deployment, you can try to delete some maps (first of all, it is wise to disable them to see if they can be missed)

  Did you leave the software to install WebLogic and more SOA on your server (also the decompressed files)
  those who would certainly (when it is deleted) give you some respite.

  ------
  Seminar on Cloud Computing - http://middlewaremagic.com/weblogic/?p=7387

• Deployment error - java.io.IOException: no space is available on the device

  Hi everyone, I'm the BPM project deployment, I get the error below. Can someone please guide the solution for the error below. Thanks adavance. oracle.fabric.common.FabricDeploymentException: error occurred while processing file sca_TestSOAEmploy_rev1.0.jar rad before transferring in the store of MDS. Please make sure that the sar file is a valid jar file. : no space is available on the device {rootCauses = []} to oracle.integration.platform.blocks.deploy.servlet.BaseDeployProcessor.deploySARs(BaseDeployProcessor.java:160) to oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.doDeployWork(DeployProcessor.java:203) to oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.doDeployWork(DeployProcessor.java:147) to oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.doDeploy(DeployProcessor.java:134) to oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.process(DeployProcessor.java:100) truncated. check the log file full stacktrace caused by: java.io.IOException: no space is available on the truncated device at java.io.FileOutputStream.writeBytes (Native Method) at java.io.FileOutputStream.write(FileOutputStream.java:260) at oracle.integration.platform.blocks.deploy.CompositeJarExpander.expandOneEntry(CompositeJarExpander.java:238) at oracle.integration.platform.blocks.deploy.CompositeJarExpander.expandJar(CompositeJarExpander.java:118) at oracle.integration.platform.blocks.deploy.CompositeJarExpander.expandJar(CompositeJarExpander.java:96). check the log file full stacktrace

  problem solved. It's a matter of space on the disk.

• The o/s message: no space is available on the device

  Oracle 10.2.0.4, Solaris 10 x 86
  
  In SqlPlus, I run a script that runs different tasks such as inserts, updates, you recreate synonyms. The script ends abruptly with an error o/s Message: no space is available on the device:

  SQL> CREATE OR REPLACE SYNONYM myuser.tablename FOR tablename;
  
  Synonym created.
  
  Elapsed: 00:00:00.00
  SQL>
  SQL> O/S Message: No space left on device
  Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Production
  With the Partitioning, OLAP, Data Mining and Real Application Testing options
  bash-3.00$

  It is an extract of the execution of the script - the last CREATE statement and the following error.
  
  I googled for that and according to the different posts, I tried to increase the values in/etc/system file this way:
  

  set shmsys:shminfo_shmmax=4294967295
  
  set shmsys:shminfo_shmmin=1
  
  set shmsys:shminfo_shmmni=100
  
  set shmsys:shminfo_shmseg=10
  
  set semsys:seminfo_semmns=32000
  
  set semsys:seminfo_semmsl=256
  
  set semsys:seminfo_semmni=128
  
  set semsys:seminfo_semvmx=32767
  
  set noexec_user_stack=1

  The I also tried to change the project to the oracle of the user of the operating system, and now it looks like this:
  

  group.dba
          projid : 100
          comment: "Project for oracle os user and members of dba group"
          users  : (none)
          groups : (none)
          attribs: project.max-msg-ids=(priv,256,deny)
                   project.max-sem-ids=(priv,100,deny)
                   project.max-sem-nsems-ids=(priv,256,deny)
                   project.max-shm-ids=(priv,100,deny)
                   project.max-shm-memory=(priv,4294967295,deny)

  However, when I restarted the sqlplus script I still end up with the same message o/s: no space is available on the device.
  
  It's the output of the df - h command:
  

  ash-3.00$ df -h
  Filesystem             size   used  avail capacity  Mounted on
  /dev/dsk/c0d0s0         17G   8.4G   8.1G    51%    /
  /devices                 0K     0K     0K     0%    /devices
  ctfs                     0K     0K     0K     0%    /system/contract
  proc                     0K     0K     0K     0%    /proc
  mnttab                   0K     0K     0K     0%    /etc/mnttab
  swap                   959M   992K   958M     1%    /etc/svc/volatile
  objfs                    0K     0K     0K     0%    /system/object
  sharefs                  0K     0K     0K     0%    /etc/dfs/sharetab
  /usr/lib/libc/libc_hwcap1.so.1
                          17G   8.4G   8.1G    51%    /lib/libc.so.1
  fd                       0K     0K     0K     0%    /dev/fd
  swap                   959M    76K   958M     1%    /tmp
  swap                   958M    44K   958M     1%    /var/run
  /dev/dsk/c0d0s7        6.9G   6.8G     0K   100%    /export/home
  /hgfs                   16G   4.0M    16G     1%    /hgfs
  /tmp/VMwareDnD           0K     0K     0K     0%    /var/run/vmblock

  What needs to be fixed here? Thank you very much!

  / Dev/dsk/c0d0s7 filesystem appears full. You must watch your file alert.log, it tell you where is the problem.

  HTH
  Antonio NAVARRO

• Error message: could not power on VM: no space is available on the device.

  Hello

  I'm new to ESX and I increased the memory of the 1856 2048 GB VM memory.  What I did not understand where is the space to and how do I know that I currently have and / or help.

  Thank you

  -Mike

  Morning Mike,.

  Ooops missed the second part. What we normally do is to allow all the VMS being powered up with their allocations of memory present (therefore VMDK + swap) and allow then 20-30G for growth. This could be an additional memory, disks or storage VMotions expansion.

  Kind regards

  Glen

• Did not push the file control point (no space available on the device)

  Hello

  I use Proliat HP DL 380 G5.  8 GB (RAM) 61 GB of space

  (RAID0 + 1) second HARD drive has failed while working on a HARD drive at the moment...

  After 20-25 minutes, I can't ping my VM OS which is Windows 7 (active)... and events, I see this error...
  Did not push the file checkpoint at 05:00 (no space available on the device).

  Details of the event:
  	Type: error Description: Error message on WINDOWS-PRTG on localhost.localdomain ha-Datacenter: impossible to reach 5.3 GB of file control point: no space is available on the device. Time: 09/12/2015-10:05:31
  Error stack:
  	Did not push the file checkpoint at 05:00 (no space available on the device). Failed to prepare the file ' / vmfs/volumes/56653def-ccd90fc3-0a42-001b783701ae/WINDOWS-PRTG/./WINDOWS-PRTG-f1e094f5.vmem ': 28 (no space available on the device). An error occurred during registration: 28 (no space available on the device). Impossible to suspend the virtual machine: msg.suspend.error.SUSPEND_E_NOSPACE.
  Additional event details:
  	Type ID: error Build host: 3029758 Target object Type: ComputeResource Type of data center: data center The host object type: HostSystem VirtualMachine object type: VirtualMachine ChainId: 201

  Could you help me solve this problem?

  Thanks in advance

  * Note * I found the solution... Before I used the system of virtualization and Citrix (XENSERVER) there was little different. That's why I'm stuck on a few easy steps... Well, the problem was that I use 61GB HDD, 5.5 GB of memory. When I create the VM I "ve used the maximum size of HARD drive and left no space for the SWAP file. I used 58 GB, and you have to assume + memory size, this means, 58 GB + 5.5 GB...   So who is right for which I didn't have enough space. Hopefully someone will find it useful. See you soon,.

• ORA-27063: number of bytes read or written is incorrect, no space available on the device (DB went down due to no space for the temporary file)

  Hi all

  Recently, we encountered a non usual problem with restarting the database because of the ORA-27063

  number of bytes read or written is

  incorrect #IBM AIX RISC System/6000 error: 28: no space is available on the device.

  Database version: 11.2.0.4

  Type of system: SAP database

  Computer type: AIX

  When the investigation we found the full systems 100% file where resided temporary files. So to solve it, we simply added tempfiles on other file systems.

  My question is why the db restarted. As far as I know the TEMP tablespace will throw an error (unable to extend TEMP of 128 segment in tablespace TEMP) every time that

  There is no free space.

  Secondly, to avoid the above, that we began to find the TEMP files from file systems and if found 90% and above then began adding space on all the production servers to avoid

  reoccurance of this issue. Is - this recommended...?

  Thank you

  Hello

  It can be consider as an alternative (using a cron task) or if you watch in em12c could control, so you can host some metrics to check temp space.

  Now, one last thing to consider, it is not advisable to go to increase temp (to be honest, we need optimize queries, why won't they are eating take so much space)

  Third step, you can put a profile (limit) so much space is used, then kill the session so that they eat no place (so that db will not get crashed at least... only session will be started - we can very well with that, instead of hammering db)

  -Pavan Kumar N

• Could not power on VM: msg.vmk.status.VMK_NOT_FOUND.

  Hi all

  I am myself preparing the review of the VCP5-DCA, and I build my personal testlab, to try some functions where I need to improve.

  At the moment I have following configuration:

  3 x ESXi host: 10.0.0.20 - 10.0.0.22
  1 x NFS server (Linux) - 10.0.0.30
  1 x AD (Windows) - 10.0.0.10
  1 x VCC (Windows) - 10.0.0.11

  Network works perfectly between machines. All machines are virtual machines on VMware Worstation 10.

  All hosts in ESXi 3 are 5.5(Build 1331820). I exported 3 NFS shares on the NFS server and mounted on all hosts in ESXi 3 they are writable:

  C:\Program Files (x 86) \VMware\VMware CLI\bin vSphere >list of esxcli s ESXi1 u root nfs storage

  Enter the password:

  Volume name host share Accessible mounted read-only hardware acceleration

  -----------  ---------------  ------  ----------  -------  ---------  ---------------------

  NFS1 nas.tntwrk.info/nfs/1 true true false not supported

  NFS2 nas.tntwrk.info/nfs/2 true true false not supported

  NFS3 nas.tntwrk.info/nfs/3 true true false not supported

  C:\Program Files (x 86) \VMware\VMware CLI\bin vSphere >list of esxcli s ESXi2 u root nfs storage

  Enter the password:

  Volume name host share Accessible mounted read-only hardware acceleration

  -----------  ---------------  ------  ----------  -------  ---------  ---------------------

  NFS1 nas.tntwrk.info/nfs/1 true true false not supported

  NFS2 nas.tntwrk.info/nfs/2 true true false not supported

  NFS3 nas.tntwrk.info/nfs/3 true true false not supported

  C:\Program Files (x 86) \VMware\VMware CLI\bin vSphere >list of esxcli s ESXi3 u root nfs storage

  Enter the password:

  Volume name host share Accessible mounted read-only hardware acceleration

  -----------  ---------------  ------  ----------  -------  ---------  ---------------------

  NFS1 nas.tntwrk.info/nfs/1 true true false not supported

  NFS2 nas.tntwrk.info/nfs/2 true true false not supported

  NFS3 nas.tntwrk.info/nfs/3 true true false not supported

  
  

  On the NFS in Linux server, I exported all NFS as follows:

  / nfs/1	10.0.0.0/24(RW,no_root_squash,no_subtree_check,async)
  / nfs/2	10.0.0.0/24(RW,no_root_squash,no_subtree_check,async)
  / nfs/3	10.0.0.0/24(RW,no_root_squash,no_subtree_check,async)

  There is sufficient disk space on all hard drive partitions that are exported via NFS (I also checked use of IO-nodes, and it is about 1%):

  File system	Size used available use % mounted on
  / dev/sdb	99G 1.1 G 93 2% / nfs/1
  / dev/sdc	99G 62 M 94 G 1% / nfs/2
  / dev/sdd	99G 62 M 94 G 1% / nfs/3

  Now, I created VM1 and wanted to turn it on, but I'm getting following error:

  An error was received from the ESX host turning on VM VM1.

  Unable to start the virtual machine.

  Has no power on the virtual machine.

  Could not power on VM: msg.vmk.status.VMK_NOT_FOUND.

  Cannot create the file ' / VM1/./VM1-fcddfe96.vswp': not found

  
  VM1 have no reservation of memory and is configured to have 512 MB, so I expect to have 1 file swap with 512 MB in size.

  When I inspect the VM1 log file I see following:

  2013 12-21 T 19: 26:11.578Z | VMX | I120: HV settings: virtual exec = "hardware"; MMU virtual = "hardware".

  2013 12-21 T 19: 26:11.588Z | VMX | I120: OvhdMem_PowerOn: lib/overheadmem: paged 54983 non paged 12473 anonymous 10025

  2013 12-21 T 19: 26:11.588Z | VMX | I120: OvhdMem_PowerOn: first admission: paged 27889 non paged 3199 anonymous 3222

  2013 12-21 T 19: 26:11.588Z | VMX | I120: VMMEM: initial booking: 134MB (MainMem = 512MB)

  2013 12-21 T 19: 26:11.588Z | VMX | I120: MemSched_PowerOn: minGuestSize ball 26214 (80% size required min 32768)

  2013 12-21 T 19: 26:11.588Z | VMX | I120: MemSched: ovhd properties: 0 mainmem: 0 pin: 0 fpt: prealloc ls 0: 0: 0

  2013 12-21 T 19: 26:11.589Z | VMX | I120: numa: VCPU 0: VPD 0 (PPD 0)

  2013 12-21 T 19: 26:11.589Z | VMX | I120: numaHost: 1 virtual nodes, 1 virtual Sockets, physical areas 1

  2013 12-21 T 19: 26:11.589Z | VMX | I120: CreateVM: Swap: normal file name generation.

  2013 12-21 T 19: 26:11.593Z | VMX | I120: Swap file path: ' / VM1/./VM1-fcddfe96.vswp'

  2013 12-21 T 19: 26:11.593Z | VMX | I120: VMXVmdb_GetDigestDiskCount: numDigestDisks = 0

  2013 12-21 T 19: 26:11.594Z | VMX | I120: Msg_Post: error

  2013 12-21 T 19: 26:11.594Z | VMX | I120: [vob.swap.poweron.createfailure.status] cannot create the file ' / VM1/./VM1-fcddfe96.vswp': not found

  2013 12-21 T 19: 26:11.594Z | VMX | I120: [msg.vmmonVMK.creatVMFailed] could not power on VM: not found.

  2013 12-21 T 19: 26:11.594Z | VMX | I120: [msg.monitorLoop.createVMFailed.vmk] cannot power on the virtual machine.

  2013 12-21 T 19: 26:11.594Z | VMX | I120: ----------------------------------------

  
  Cluster is configured to store the files for the Exchange as well as virtual machines (default settings), so I guess that it is having problem to create the swap file on NFS. When I connect via SSH on ESXi host directly and try to create the SWAP file manually I get out to correct more (from my point of view):

  ~ # ls - lah/vmfs/volumes/NFS1/VM1 /

  Total 124

  drwxr-xr-x 1 root root 4.0 K 24 December 2013.

  drwxr-xr-x 1 root root 4.0 K December 24, 2013...

  -rw - 1 root root 8.0 G 24 December 2013 VM1 - flat hard

  -rw - 1 root root 490 24 December 2013 VM1.vmdk

  -rw - r - r - 1 root root 0 24 December 2013 VM1.vmsd

  -rwxr-xr-x 1 root root 1.7 K 24 December 2013 VM1.vmx

  -rw - r - r - 1 root root 258 24 December 2013 VM1.vmxf

  -rw - r - r - 1 root root 24 December 2013 vmware - 1.log 48.9 K

  -rw - r - r - 1 root root 48.9 K 24 December 2013 vmware.log

  ~ # touch /vmfs/volumes/NFS1/VM1/./VM1-fcddfe96.vswp

  ~ # ls - lah/vmfs/volumes/NFS1/VM1 /

  Total 124

  drwxr-xr-x 1 root root 4.0 K 24 December 2013.

  drwxr-xr-x 1 root root 4.0 K December 24, 2013...

  -rw - r - r - 1 root root 0 24 December 2013 VM1 - fcddfe96.vswp

  -rw - 1 root root 8.0 G 24 December 2013 VM1 - flat hard

  -rw - 1 root root 490 24 December 2013 VM1.vmdk

  -rw - r - r - 1 root root 0 24 December 2013 VM1.vmsd

  -rwxr-xr-x 1 root root 1.7 K 24 December 2013 VM1.vmx

  -rw - r - r - 1 root root 258 24 December 2013 VM1.vmxf

  -rw - r - r - 1 root root 24 December 2013 vmware - 1.log 48.9 K

  -rw - r - r - 1 root root 48.9 K 24 December 2013 vmware.log

  ~ #

  
  Cluster is configured for HA, HA data warehouses are: NFS1 and NFS3 (I think that this information is not relevant, but I wanted to highlight).

  Do you have ideas where the problem may be?

  Finally I had time to check this problem more deeply and discovered this problem came from the fact that I had 2 ports attached to the same subnet (vmk0 for mgmt, vMotion) and vmk1 for IP VMkernel and them configured with IPs: 10.0.0.20 and 10.0.0.100. When I removed the vmk1 and restarted host all started working as expected.

  It was similar to the challenges question with multiple VMkernel Ports on the same subnet. Insider - Articles VMware VMware support.

  I wasn't expecting it is a question that I have configured the NAS server to connect with whole subnet 10.0.0.0/24, so same 10.0.0.100 was allowed to use the datastore NFS, bot for some reason any it was causing problems.

• Turn on the computer virtual fails - "could not power on VM: not found".

  Hi guys and girls,

  I'm running a server relatively low with ESXi 4.0.0 running a SBS 2008 Standard VM as well as a couple of XP machines virtual for line inherited from enterprise applications.

  Today, one of the disks in RAID-6 went offline and was replaced, after verifying the integrity of the RAID and the ESXi server restart seems to load normally, and could be connected to via vSphere.

  I noticed that the SBS comments had not begun where was the XP guest.

  I tried to manually start the virtual machine and received the following 95% error message:

  «Could not power on VM: not found.» Unable to power on the virtual machine.

  Failure is classified in Server events:

  "Cannot be lit on localhost in ha-data center." "A general error has occurred:

  Alas, I'm new on ESXi and most of the aid is managed by my hardware vendor which is currently unavailable.

  I tried to remove the virtual machine from the inventory and re-enrollment without success.

  All files appear intact on the data store.

  Any assistance with this would be greatly appreciated.

  See you soon,.

  Tom

  I try to create a new virtual machine and configure it to use the existing hard since your SBS server disks.  Maybe the .vmx has been corrupted?  The file vmware.log in the directory that the virtual machine is could give more information on what is not found.  Use the data store browser to download the file to your w/s.

• Whenever I run Firefox, it appears an error message indicating "Firefox could not install this point because 'install.rdf' (provided by the element) is incorrect or does not exist." Contact the author to this problem. »

  Firefox could not install this point because 'install.rdf' (provided by the element) is incorrect or does not exist. Contact the author to this problem.

  The above statement is in the box pop up error every time, when I run Firefox. If I click on ok in the box of Firefox opens. How can I solve this problem of initialization/launch?

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of your modules is causing your problem (switch to the DEFAULT theme: Tools > Modules > themes).
  
  See the extensions, themes and problems of hardware acceleration to resolve common troubleshooting Firefox problems and troubleshooting questions with plugins like Flash or Java to solve common Firefox problems

  If this does not work in safe mode and then disable all your extensions and then try to find out who is causing by allowing both the problem reappears.
  
  You can use "Disable all add-ons" window the startup of Firefox to solve the issues in Safe Mode to disable all extensions.
  
  You will need to close and restart Firefox after each change via "file > exit ' (Mac: ' Firefox > leave";) Linux: "file > exit ')

• Error number: 0x800CCC0D, the host 'POP3' could not be found. Please make sure you entered the server name correctly in Outlook Express 6.

  Original title: "POP3" server could not be found...

  I get the following error message every time I try to use Outlook Express 6 as my default email: 'the host 'POP3' could not be found.  Please check that you have entered the server name correctly.  "Account: 'POP3', server: 'POP3', Protocol: 'POP3', Port: 110, secure (SSL): no, Socket error: 11001, error number: 0x800CCC0D".  I have a Dell Optiplex GX110 desktop computer with a processor Intel Pentium III (996 MHz, 256 MB RAM).  I already know that I have to increase the amount of RAM, but I don't think this is part of my problem.    I am connected to a local network, Verizon (Internet, cable TV and phone package). I run Microsoft Windows XP Professional (5.1.2600) 2002 with service pack 3 version.  I check frequently that my system is configured to automatically receive all updates for Windows XP more updates from Microsoft.  QUESTION: Is there a version of Microsoft in September 2011 that had something to do with POP3 servers?  Obviously it did not automatically installed in my computer.  I even checked my system twice to make sure that Microsoft was on my list of safe sites.  Please help me.  I really want to use Outlook Express 6 as my default email.

  Thank you!
  George Raynes

  Hi GeorgeRaynes,

  1. were you able to use Outlook Express 6 correctly previously?

  2 have you made any hardware changes or software on the computer before this problem?

  You can follow this link & check if the problem persists:

  Troubleshooting error messages that you receive when you try to send and receive e-mail in Outlook and Outlook Express

  Hope the helps of information.
  Please post back and we do know.

• Trying to send emails through my scanner/printer and my window that educated told me that program file could not be installed or to load and go to the Help menu under 'detect and repair '?

  through my scanner/printer and my educated place window tells me that program file could not be installed or to load and go to the Help menu under 'detect and repair '? I need help with this

  Hello

  you say not what e-mail program, you use!

  It takes a lot more information

  ______________________________________________

  see if this applies:

  Looks like you need configure Windows Mail

  you need to configure your e-mail account windows mail with your ISP internet service provider

  They provide you with account settings you need to do

  Ask them to

  username
  password for your access broadband account / distance with them

  Server of incoming POP3 mail
  outgoing mail SMTP server

  and here's how to configure windows mail after getting the email correct account settings

  http://www.vista4beginners.com/Windows-Mail

• "The dependency service or group could not start" - cannot open network connections to connect to the internet.

  Hello

  Ive recently managed to repair my Vista computer from a black desktop screen, by doing a Virus scan from kaspersky in safemode, thanks for the advice in this thread

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/a960276d-5147-4286-A437-711e96e25296/

  However, whenever I try to go to the network connections to connect to the internet, I get the error message saying "the dependency service or group could not start", so I can't update kaspersky for the last secuirity as well as not to use the internet. I tried the system restore, but there is no previous saved location for me to do. :(

  Any help would be greatly appeciated :)

  Thanks in advance

  Sam

  Medion M96350,

  Intel Core 2 Duo,

  T520 @1.5 - Ghz,

  Vista Home Premium

  Hello

  You can use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow the link below.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.