available on the device file transfer to host using scp 'no space '.
Hi all, I have 4 hosts build 260247 and I'm looking forward to upgrade using esxupdate at 348481:
I downloaded the file .zip of vmware server on my PC and when I try to copy this file to the host is not possible, I get the same massage with all the guests: "scp: / tmp/upgrade-from-esxi4.0-to-4.1-update01-348481.zip: no space not available on the device.
The upgrade-from-esxi4.0-to-4.1-update01-348481.zip file size is 217 MB and when I get the message that I see the copied file on the ESX, but the size is 201 MB. In the guests, I am not able to copy files larger than 200 MB.
Just to check I copied a (smaller than the upgrade.zip) 50 MB file and it has been copied correctly.
I've looked everywhere and no luck. I used SCP, diferent ESX host diferent, etc..
After downloading a file in a data store, you are able to access it in the CLI to "/ vmfs/volumes /
André
Tags: VMware
Similar Questions
-
Hi all
Recently, we encountered a non usual problem with restarting the database because of the ORA-27063
number of bytes read or written is
incorrect #IBM AIX RISC System/6000 error: 28: no space is available on the device.
Database version: 11.2.0.4
Type of system: SAP database
Computer type: AIX
When the investigation we found the full systems 100% file where resided temporary files. So to solve it, we simply added tempfiles on other file systems.
My question is why the db restarted. As far as I know the TEMP tablespace will throw an error (unable to extend TEMP of 128 segment in tablespace TEMP) every time that
There is no free space.
Secondly, to avoid the above, that we began to find the TEMP files from file systems and if found 90% and above then began adding space on all the production servers to avoid
reoccurance of this issue. Is - this recommended...?
Thank you
Hello
It can be consider as an alternative (using a cron task) or if you watch in em12c could control, so you can host some metrics to check temp space.
Now, one last thing to consider, it is not advisable to go to increase temp (to be honest, we need optimize queries, why won't they are eating take so much space)
Third step, you can put a profile (limit) so much space is used, then kill the session so that they eat no place (so that db will not get crashed at least... only session will be started - we can very well with that, instead of hammering db)
-Pavan Kumar N
-
Did not push the file control point (no space available on the device)
Hello
I use Proliat HP DL 380 G5. 8 GB (RAM) 61 GB of space
(RAID0 + 1) second HARD drive has failed while working on a HARD drive at the moment...
After 20-25 minutes, I can't ping my VM OS which is Windows 7 (active)... and events, I see this error...
Did not push the file checkpoint at 05:00 (no space available on the device).Details of the event: Type: error Description: Error message on WINDOWS-PRTG on localhost.localdomain ha-Datacenter: impossible to reach 5.3 GB of file control point: no space is available on the device. Time: 09/12/2015-10:05:31 Error stack: Did not push the file checkpoint at 05:00 (no space available on the device). Failed to prepare the file ' / vmfs/volumes/56653def-ccd90fc3-0a42-001b783701ae/WINDOWS-PRTG/./WINDOWS-PRTG-f1e094f5.vmem ': 28 (no space available on the device). An error occurred during registration: 28 (no space available on the device). Impossible to suspend the virtual machine: msg.suspend.error.SUSPEND_E_NOSPACE. Additional event details: Type ID: error
Build host: 3029758
Target object Type: ComputeResource
Type of data center: data center
The host object type: HostSystem
VirtualMachine object type: VirtualMachine
ChainId: 201Could you help me solve this problem?
Thanks in advance
* Note * I found the solution... Before I used the system of virtualization and Citrix (XENSERVER) there was little different. That's why I'm stuck on a few easy steps... Well, the problem was that I use 61GB HDD, 5.5 GB of memory. When I create the VM I "ve used the maximum size of HARD drive and left no space for the SWAP file. I used 58 GB, and you have to assume + memory size, this means, 58 GB + 5.5 GB... So who is right for which I didn't have enough space. Hopefully someone will find it useful. See you soon,.
-
VMware esx ei, 3.5.0 123629
Physical memory: 64 GB
Hard drive: 1.63 TB
7 virtual machines. 5 of them are configured with 4 GB memory and 2 of them with 2 GB of memory. I am able to power on 3 virtual machines with 4 GB of memory.
When I try to turn on 4th VM with 2 GB of memory, I get this error message "could not power on VM: no space is available on the device: cannot power on VM.»
I would like to know if this is the limitation of the ESX Server? How should I size the memory for VMS if I want to run every 7 virtual machines to the
Moreover, given that I have 64 GB of physical memory. Is there documentation that provides a report of the maximum allowed memory configurable
compared to the virtual memory?
Thank you
Ganesh.
Ganesh,
Memory reservations are defined based on VM by VM.
You can allocate more memory to the virtual machines you have in your host (it's not really a good idea to go crazy with the overcommitment of memory, but some level of excessive pressure is used in general). Memory applied to your VM resources are shares, bookings and VMkernel Swap limits.
Just to illustrate:
You allocate 8 GB memory to a virtual computer. If you take all the parameters by default, ESX will allot a 8 GB VMkernel Swap file in the base directory of your VM (it will have the extension ".vswp") this VMkernel Swap file is a safety net. Your virtual machine, at this stage, can consume up to 8 GB of memory If physics is available from the host. If the memory of your host is overcommitted, some of the available memory 8 GB could be allocated on 8 GB VMkernel Swap file.
If you set a reserve of memory - 2 GB - this means that the vmkernel will still award the first 2 GB of memory used by the virtual machine to the physical memory. This is not means that the 2 GB of memory reserved is carved off the coast and completely dedicated to the virtual machine. This means that the vmkernel offers up to 2 GB of RAM to the VM when and if she needs to use it. It is a guarantee that the memory will be available upon request. Because of this guarantee of the VMkernel, VMkernel swap file only has to make sure that the 6 GB memory is satisfied (4 GB total less the 2 GB reserved), so the VMkernel Swap file is only 6 GB in size.
Actions are a mechanism for prioritization and limits are a cap on physical memory ever allocated to the VM.
You can set up any number of memory for the virtual machines that you want - frankly, overcommitment of memory for ESX is a very good thing, but you must be vigilant about watching your systems if approve you. If you have 64 GB of RAM, and you only configure your virtual machines to use total 32G, then you lose 32 GB of RAM. If you allocate, say, 96 GB of RAM (total) to your virtual machines, then you look at a 50% overcommitment. What to watch in overcommitting memory is application performance (and more importantly - perception of the user of this performance) and also the memory ballooning and VMkernel Swapping activity. Those who can both will be in graphics performance in VirtualCenter. I would recommend reading the Guide to management resources for more details.
Hope that provides an overview.
Thank you
-jk
-
Deployment error - java.io.IOException: no space is available on the device
Hi everyone, I'm the BPM project deployment, I get the error below. Can someone please guide the solution for the error below. Thanks adavance. oracle.fabric.common.FabricDeploymentException: error occurred while processing file sca_TestSOAEmploy_rev1.0.jar rad before transferring in the store of MDS. Please make sure that the sar file is a valid jar file. : no space is available on the device {rootCauses = []} to oracle.integration.platform.blocks.deploy.servlet.BaseDeployProcessor.deploySARs(BaseDeployProcessor.java:160) to oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.doDeployWork(DeployProcessor.java:203) to oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.doDeployWork(DeployProcessor.java:147) to oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.doDeploy(DeployProcessor.java:134) to oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.process(DeployProcessor.java:100) truncated. check the log file full stacktrace caused by: java.io.IOException: no space is available on the truncated device at java.io.FileOutputStream.writeBytes (Native Method) at java.io.FileOutputStream.write(FileOutputStream.java:260) at oracle.integration.platform.blocks.deploy.CompositeJarExpander.expandOneEntry(CompositeJarExpander.java:238) at oracle.integration.platform.blocks.deploy.CompositeJarExpander.expandJar(CompositeJarExpander.java:118) at oracle.integration.platform.blocks.deploy.CompositeJarExpander.expandJar(CompositeJarExpander.java:96). check the log file full stacktrace
problem solved. It's a matter of space on the disk.
-
The o/s message: no space is available on the device
Oracle 10.2.0.4, Solaris 10 x 86
In SqlPlus, I run a script that runs different tasks such as inserts, updates, you recreate synonyms. The script ends abruptly with an error o/s Message: no space is available on the device:
It is an extract of the execution of the script - the last CREATE statement and the following error.SQL> CREATE OR REPLACE SYNONYM myuser.tablename FOR tablename; Synonym created. Elapsed: 00:00:00.00 SQL> SQL> O/S Message: No space left on device Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Production With the Partitioning, OLAP, Data Mining and Real Application Testing options bash-3.00$
I googled for that and according to the different posts, I tried to increase the values in/etc/system file this way:
The I also tried to change the project to the oracle of the user of the operating system, and now it looks like this:set shmsys:shminfo_shmmax=4294967295 set shmsys:shminfo_shmmin=1 set shmsys:shminfo_shmmni=100 set shmsys:shminfo_shmseg=10 set semsys:seminfo_semmns=32000 set semsys:seminfo_semmsl=256 set semsys:seminfo_semmni=128 set semsys:seminfo_semvmx=32767 set noexec_user_stack=1
However, when I restarted the sqlplus script I still end up with the same message o/s: no space is available on the device.group.dba projid : 100 comment: "Project for oracle os user and members of dba group" users : (none) groups : (none) attribs: project.max-msg-ids=(priv,256,deny) project.max-sem-ids=(priv,100,deny) project.max-sem-nsems-ids=(priv,256,deny) project.max-shm-ids=(priv,100,deny) project.max-shm-memory=(priv,4294967295,deny)
It's the output of the df - h command:
What needs to be fixed here? Thank you very much!ash-3.00$ df -h Filesystem size used avail capacity Mounted on /dev/dsk/c0d0s0 17G 8.4G 8.1G 51% / /devices 0K 0K 0K 0% /devices ctfs 0K 0K 0K 0% /system/contract proc 0K 0K 0K 0% /proc mnttab 0K 0K 0K 0% /etc/mnttab swap 959M 992K 958M 1% /etc/svc/volatile objfs 0K 0K 0K 0% /system/object sharefs 0K 0K 0K 0% /etc/dfs/sharetab /usr/lib/libc/libc_hwcap1.so.1 17G 8.4G 8.1G 51% /lib/libc.so.1 fd 0K 0K 0K 0% /dev/fd swap 959M 76K 958M 1% /tmp swap 958M 44K 958M 1% /var/run /dev/dsk/c0d0s7 6.9G 6.8G 0K 100% /export/home /hgfs 16G 4.0M 16G 1% /hgfs /tmp/VMwareDnD 0K 0K 0K 0% /var/run/vmblock
/ Dev/dsk/c0d0s7 filesystem appears full. You must watch your file alert.log, it tell you where is the problem.
HTH
Antonio NAVARRO -
could not power on VM: no space is available on the device. Has no power on VM
I'm trying to start a guest o/s on an ESX 3.5.0 host, but I get the following error;
could not power on VM: no space is available on the device. Has no power on VM
Can someone point me in the direction of why this can be implemented.
Info. who can help;
replied the volume of a partner SAN / SAN and he was promoted to a volume. Added the VM to the inventory, disabled, connect to the network at startup.
Then the message failed to try to turn on,
Thanks for the reply, free space seems OK.
Are you sure?
Use this command (from ESX CLI):
VDF h
How much vRAM you have assigned to your virtual machine?
-
-
java.io.IOException: no space is available on the device
Hello
I have serched on this problem and did not see the solution.
I try to stop my managed server or my server admin and displays the message:
"java.io.IOException: no space is available on the device.
at java.io.FileOutputStream.writeBytes (FileOutputStream.java)
at java.io.FileOutputStream.write(FileOutputStream.java:260)
at sun.nio.cs.StreamEncoder.writeBytes(StreamEncoder.java:202)
at sun.nio.cs.StreamEncoder.implFlushBuffer(StreamEncoder.java:272)
at sun.nio.cs.StreamEncoder.implFlush(StreamEncoder.java:276)
at sun.nio.cs.StreamEncoder.flush(StreamEncoder.java:122)
at java.io.OutputStreamWriter.flush(OutputStreamWriter.java:212)
at java.io.BufferedWriter.flush(BufferedWriter.java:236)
at com.oracle.cie.domain.script.jython.WLSTOfflineInterpreterHelper.createWLSTInitFile(WLSTOfflineInterpreterHelper.java:82)
at com.oracle.cie.domain.script.jython.WLST_offline.getWLSTOfflineInitFilePath(WLST_offline.java:241)
at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke (NativeMethodAccessorImpl.java39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
to java.lang.reflect.Method.invoke(Method.java:597).
If I check my HD with the df command, shows:
1 K-blocks used available use % mounted on file system
/ dev/map/VolGroup00-LogVol00 24440700 23179204 0 100% /
/ dev/sda1 101086 23398 72469 25% / Boot
tmpfs 4095028 0 4095028 0% / dev/shm
/ dev/map/VolGroup00-LogVol02 51573372 10179692 38773880 21% /mnt1
How can I check where is the hd space?
What can remove in my soa_server?
Thank you and best regards."How can I check where is the hd space?
You can try the command "du" (http://www.computerhope.com/unix/udu.htm)
"what can I remove from my soa_server?
Not much, depending on your deployment, you can try to delete some maps (first of all, it is wise to disable them to see if they can be missed)
Did you leave the software to install WebLogic and more SOA on your server (also the decompressed files)
those who would certainly (when it is deleted) give you some respite.------
Seminar on Cloud Computing - http://middlewaremagic.com/weblogic/?p=7387 -
Load data into Essbase with EAS (no space available on the device)
Hello
I exported all Essbase database data in a text file with EAS. The size of the file is 1.6 GB autour
I want to load it into the same database on another server with EAS. And each time around 55%, EE gives me the error "No space" available on the device [ServerB]
Here is the configuration:
-Essbase server: 11.1.1.3 on a linux server has (enough space left for Essbase)
-Server EAS: 11.1.1.3 on a linux server B (enough space for the data file)
-EAS Client: 11.1.1.3 on my computer (Windows)
-Data file: on my computer too
Error messages tells me that there is no space left on the service Regional Server.
Do you know where EE server temporarily load the data file before sending it to Essbase? So, I can increase my file system.
Thanks for your help.Why don't you just copy the export more to the essbase server, personally I would not even try to send this amount of data over a network through the Regional service.
See you soon
John
http://John-Goodwin.blogspot.com/ -
I have a problem with my 104
After one or two days the admin interface stops working and it stops performing backup jobs.
If I can ssh into the box and do a reboot it told: "error: no space is available on the device.
But he there ara severel GB of free space on both og / and / data
I run the latest firmware.
What could be wrong?
/ Jacob
I did an OS reinstall that solved the problem
-
Is only available for the xmp files RAW files?
When we develop a RAW with Camera Raw image, we always get a file with all the settings xmp,
But after that I developed a JPG image, I saw that the Raw settings of the camera icon appeared above the upper right of the thumbnail of the image in Bridge.
However, I couldn't find the xmp file.
Is only available for the xmp files RAW files? Jpg or TIF don't have for their Camera Raw settings xmp files?
For JPG and TIF files - adjustments are classified, by design, in the metadata of the file rather than in a file "Sidecar".
-
I downloaded a Flash file to my host using FileZilla. Now how to do it to my Web site?
I downloaded a Flash file to my host using FileZilla. Now how to do it to my Web site? DVD Flash folder created in yet. I want to put it on a website to play as a DVD. I got a GoDaddy ftp server host and they told me to install FileZilla to transfer files to my place. But I'm Muse now and I do not see how to bring it in my current project Panel.
You can either file to your content page or you can add the files to download in Muse and then use any player to add code to read the file on the integration page.
Thank you
Sanjit
-
I am trying to rebuild my old iTunes library (hoping to keep notes, play counts, playlists, etc.) on a new laptop of an old PC, although the only files I have to use the old are the .xml, .itl and current music files. Is this enough information to do it, and if so, how should I do?
I lost the other information by following the instructions found online of other attempts. I have unfortunately seem to have lost all that concerns my old library with the exception of the foregoing. I have been using an external hard drive to make this attempt. When iTunes opens it is empty, and when you try to import the .xml I only get playlists, although there is nothing inside of them. It would not be the end of the world for me to start all over again, I've not lost music files, but loading in my all of my old info is much, much, much more desirable. Thank you!
I'm sure that the sides are stored with the file of 80%. (wav mp3/4 whatever)---> or at least the should be!
Just install itunes.
Copy the contents of your old folder in the itunes directory and start itunes--> it will do the rest.
PS...
However, I wouldn't bother with itunes more... windows media player is pretty cool in 7, does all the same things.Personally I stick with the purchase of CD (mp3 downloads are a rip off)
'Cool' apples, however, is not it... and what would we do without our podcasts (what happened to the embedded html objects I don't know) computer nerd who serves the grannies
-
Original title: Canon MX350 printer
I can't remove the MP (Canon MX350) drivers in my computer. In the Remove Programs option request to remove the drivers but he tells me that the driver files are currently in use and is abandoned. I deleted all the other software printer with no problems. The printer has been set up with Wi - Fi.
Thank you for your comments.
Finally, I stumbled upon you are the indications you mention in step 1 above and finally managed to remove the MP drivers with the Remove programs in windows 8. When this was removed successfully, I followed on by deleting all associated programs. It removed all the Archives of the printer on my PC.
I then reinstalled from the original disc and everything works fine now.
Thank you once again.
John
-
How create the CSV file delimited by tabs using ORACLE utl_file?
How create the CSV file delimited by tabs using ORACLE utl_file? Please provide the code sampl.
This isn't a problem with Oracle, it is a problem with the way you open the data in Microsoft Excel.
In Excel, you want (depending on your version may vary slightly)...
Office 2010...
1. go in the Ribbon "Data".
2. click on 'text '.
3. Locate and select your file, and then click "import."
4 step 1 of the wizard - choose "Delimited", then click on "next >".
5. step 2 of the wizard - choose "Tab" as the delimiter and click on "next >".
6. step 3 of the wizard - define types of column as needed (if necessary) and click on "Finish".
7. check where you want the data in the worksheet.
Data is loading now in single cells as you expect.
If you just double-click the CSV, Excel is apparently assuming that it will be separated by commas and does not recognize tabs as separators, unlike when you rename the file with a .xls extension where it examines the file, complains that it is not a content .xls and asks you to confirm that you want to continue loading and then intelligently recognizes the tabs and the format for you.
As I said, not a problem with Oracle, just a problem with the MS Excel software.
Maybe you are looking for
-
Re: Recognition of face and Win XP software
Hello. Is there a face recognition software, but not for Windows Vista?I'm about to change my XP system and I would like to use this utility.
-
Windows 7 Setup fails because of pilot missing (HP Pav 500 - 417ng with Win 8.1)
Hello I added an SSD for my hp pavilion 500-417NG and want to install Windows 7 64 Bit including SP1 for the SSD. I use a USB key to start the installation of Win 7 program. The installation program starts as usual, lets me select language, keyboard,
-
I lost at the age of Mythology the titans expansion disc, but I still have key code, is there a way I can download age of mythology and put the key in to make it work?
-
Hello I have X 230 with battery 6 cells. Now most of the time the laptop is connected to the power supply. What is the best power plan to keep the battery in good condition? should I remove the battery? Thank you Abed.
-
G2710 - scanning of documents, full size
Hi, I hope someone can help me with what is probably a very simple problem! I want to scan a paper document to PDF on my MacBook (OS x 10.6.5) using my new HP Scanjet G2710. In the HP Device Manager, I select "Scan to PDF", and the device scans the p