The OAM access server

Similar Questions

• VPN error 868 the name of the remote access server is not resolved

  I use Windows 7 Home Premium and you want to configure a VPN with my office network that uses the Check Point Safe@Office.  I am unable to log in and get the error that does not resolve the name of the remote access server and Windows cannot find the host using DNS name.  Any suggestions on what to try to fix the problem?  I set up the VPN connection according to the instructions of our network administrator.  We use XP in the office.

  Hello
  Welcome to the Microsoft answers site

  The question that you'd be better suited in the TechNet community. Please visit the link below to find a community that will provide the best support.
  http://social.technet.Microsoft.com/forums/en-us/ForefrontedgeVPN/threads

  It may be useful
  Thanks and greetings
  Support Microsoft-dieng
  Visit our Microsoft answers feedback Forum and let us know what you think
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/

• ACS - the clean access server

  Hi guys,.

  I have a doubt about the own ACS and access server.

  The clean access server can do the job of the ACS?

  for example, act as a VMPS server, AAA server, or radius server.

  Thank you

  ACS is entirely different to serve own access. See the below url for more details

  http://www.Cisco.com/en/us/products/ps6128/products_qanda_item0900aecd803be813.shtml

• Not able to access the Console of the OAM?

  Hi all

  I am facing this problem while I try to connect to the console of the OAM, when the managed server is started I am not able to access the Console of the OAM, but when I stopped the managed server, I am able to access the Console of the OAM. Please guide me on this.

  I need documentation on how exactly the work of the Console of the OAM.

  Thank you

  SJ

  Hi Laura,

  Thanks for giving your valuable time, I was able to understand the question. LoadBalancer settings pointing to another machine where I had not installed OAM.

• SSO OAM Access Manager solution is unable to open the docs and PDFs

  Hello
  
  I created a solusion to SSO like this.
  
  OAM against AD, running on windows (Server A). WebPass is on IIS.
  The application that I am protecting is an application from Weblogic 10.0 Windows (Server B)
  I also installed the webgate on serverB running on Apache 2.0, and the installation is done by following the documentation for Weblogic sso
  (This is to make the executable application directly via port 80 and Apache redirect)
  
  The sso works fine.
  
  But I have a problem on IE6
  
  When the application attempts to open documents to view in msword or pdf for printing format, the document does not open, I get a "file not found" exception in the browser and the url to get the document seems very long. (The gray popup)
  
  When I opened the application in IE8, it works very well and the url to get the document seems short (just the docID)
  
  (The application is currently only compatible for IE6 running in IE8 will cause other problems)
  
  I can not find error messages in all the papers.
  
  If I run the excact same application without sso its fine in IE8 and IE6 to work
  
  Concerning
  Tine

  Hi Tine,.

  I don't know what the problem is, but try to set CachePragmaHeader and CacheControlHeader in the 'public' WebGate (in the Console of the system access) to see if that helps.

  Kind regards
  Colin

• Mac OS Server - local users on console does not.  The shared access or ssh on account works

  A Mac Mini running Mac OS Server has problems with authenticating the passwords of local users.  Users connect the console of the physical computer running macOS app Sierra and Server 5.2.

  I'm looking for a short solution from scratch user and migrating data to a new installation.

  My hunch is that there is an interaction with the server application.  The other Macs, I managed on the same network fail server and do not have these problems.

  I installed a new version of macOS Sierra and then migrate the old data server on using the migration wizard, but the problem persists.

  The server used to have users on the network, but they are all deleted, and all users are the.

  In application server, the only services running time machine, the caching server and file server.  DNS, DHCP and Open Directory services are disabled in the server application.

  A local user password will work normally when the computer is restarted.  But if the user disconnects, and tries to connect to or use the fast user switching back and forth between accounts, the password is not accepted.  On reboot, it will be accepted.

  In addition to passwords are not accepted, other errors when you try to connect to specific customers include:

  "Your account is not a valid directory.  For more information, contact your system administrator'

  or

  "On behalf of user that you selected is not available."  Check your network connection and try again to the user account.  If you are connected to the network, ask system administrator for assistance. »

  If a network is used to access the data of the user using the user name and password, it works.  Similarly, SSH'ing via the terminal using the username and password works.

  An admin user can change the password back and it usually works for one login.  Then the password is denied if the user disconnects or use the fast user switching.

  Thanks in advance for any help on this embarrassing problem!

  I should clarify: it's the passwords of local users on the Mac who stop working (for the connection or fast user switching), until the Mac restarts.

• How to access server dns on a photosmart 7510 address to set the address of my router?

  My father has just got a photosmart 7510.  I have a trendnet wireless router, which has a few computers connected wirelessly.  To get these to connect, I had to modify the IPv4 settings to set the default gateway and dns server addresses main address of my router. On the printer, I can find where to enter the default gateway, but NOT the primary dns server.  Printing of network configuration settings shows the dns backend as 0.0.0.0, as is the case, the router gave the printer MAC address, but they cannot talk to each other on IP and of setting up the PC on the network, I know that it won't work correctly together w/that.

  Where in the printer configuration menus this value is located so I can put it?

  Oh, OK.  We should perhaps solve the problem of connection to the router, get the printer connected to it with a DHCP address, then go to the printer web page and tweak it.

  -Reboot the router by removing the power momentarily.

  -Change the channel to 11 router and make sure that you use WPA or WPA2

  -On the printer to go wireless > restore network keybord.

  -In the same network menu, run the Wireless Setup Wizard.

  The printer must be connected to the router, then you should be able to access it via its IP address.

• Unable to connect to the main DNS server when you try to access the internet

  Computer has worked fine for the year last until 2 weeks ago and now unable to connect to the internet.

  Windows Vista on broadband and services connected directly to the modem by ethernet.  Provider Internet has run tests and confirmed modem is fine and it's like my laptop runs very well on it.

  Re-initialization of the modem, internet works and you can type in a few places and it seems OK, but you can't do anything on a site, it is, enter the details and even if you try and enter anything, you can usually view 2 sites and then it goes again.  However, the network icon shows that on and connected to the internet.

  The diagnosis, it is said that he cannot access the primary DNS server.

  Do you have any idea how I can fix this or should I just completely re - install windows from the original disk set?

  A few things you can try...  [This will be the Windows to try to automatically fix your connection]

  Open 'Network and sharing Center' (you can search for it in the Vista Start menu)

  Under tasks, click on "diagnose and repair".

  If this fails, you can try...  [This will use the NETSHell utility to RESET your network interface (removes all static configurations and sets DHCP)]

  Open a command prompt (you can also search for it on the start menu in Vista, if you have this OPTION enabled, you need to start as administrator)
  The type of command line: NETSH INTERFACE IP RESET. JOURNAL

  If you still have problems, try to post your IPCONFIG/all, file HOSTS and ROUTE PRINT on this forum.

  How to:

  IPCONFIG/ALL
  Open the command prompt and type: IPCONFIG/all
  To save the output to a file simply type at the command prompt: IPCONFIG/all > filename.txt

  Your HOSTS file is located in the following path (the HOSTS file does not have an extension, it is simply named "HOSTS"):
  %windir%\system32\drivers\etc\HOSTS
  or
  C:\Windows\System32\Drivers\ETC\HOSTS

  ROUTE PRINT
  Open the command prompt and type: ROUTE PRINT
  To save the output to a file simply type at the command prompt: ROUTE PRINT > filename.txt

  PS: If it becomes really hairy, you can provide NETSH DUMP (this provides virtually all network configurations)... You certainly shouldn't need to re - install Windows.  There is probably a setting of network configuration problem that causes this problem.  Good luck!

  -Rob

• I can access the internet but can no longer send or receive mail. I get a message that the POP 3 Server has not responded.

  I can access the internet but can no longer send or receive mail. I get a message that the POP 3 Server has not responded. Nor do the SMPT server. 0x800CCC19 error number is given in both cases. I have no help when I type the error number in the help Windows Mail. How can I solve this problem?

  original title: can't send or receive emails.

  Tools > accounts > select your account > properties > Server tab, ensure that 'Connect with password' is not enabled.

  Or you might want to try the new port settings.
  http://www22.Verizon.com/residentialhelp/highspeed/email/setup+and+use/questionsone/124289.htm

• If the user accesses the server accidentally deleted the folder how recovery

  If the user accesses the server accidentally deleted the folder how recovery

  Hi AmjadPasha,

  If you are referring to a local file, you can check the trash.

  If you are referring to a network share, then there is very little that can be done.

  You can try using recovery software/services of third parties to retrieve the file.

  You can use your favorite search engine to search for third-party software.

  Note: The use of third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Hope this information is useful.

• Causing the problems of internet connection Internet access server

  I have covered a lot of discussions on this issue and have tried all the fixes I found relating to this issue but did not have a chance to find a solution to my problem. I apologize if this is a repeat post, but as I said, none of the questions I found helped.

  ------

  I have 2 laptops (windows 7), 2 xbox 360 s, and smart phones that will all connect to my internet connection with a problem and run great.

  However, I recently bought a PC oriented for the game, and I got this error because I got it.

  I am able to connect to the Internet. Google has always works as Youtube, but youtube videos will stop eventually buffering until I have restart the browser.  Most of the games that I play online will launch and play very well in the beginning, but then they lose the internet connection and not return it until I have close the game and restart it, then it works very well for 5 minutes for an hour, but ends by loses connection again until I got close the game and start it again... However, when games lose connection if I Alt + Tab back on the desktop I'm always connected to the internet and can run my internet browser to always connect to google or youtube... Other sites are also affected (Netflix, Microsoft, Outlook, contraction, etc. all will simply keep the load and eventually tell me 'the site takes long to answer').

  I tried the update of Device Manager, but it says it cannot find the updates for the server to access Internet with yellow Triangle /!

  In the currency manager<><>
  "The drivers for this device are not installed (Code 28)

  To find a driver for this device, click Update driver. »

  When I click on "put updated pilot."

  "Windows was unable to install your Internet access server .
  Windows found driver software for your device.

  If you know the manufacturer of your device, you can visit their website and check the support section for driver software. »

  However after visiting the Linksys website, the only thing close to that I found was to update the firmware, which I did, but was still does not solve the problem, and I can't seem to find everything related to the Internet Access Service.

  I then tried calling Linksys (router Linksys E1200 series), who directed, I call my ISP, which then make sure that my drivers are up to date.

  At the beginning I was not able to check for an update for access to the Internet Server (all have been 'grayed out' and unclickable).  However after clicking on "Devices and printers" under the start menu, right click router<>

  I tried also to open the command prompt

  I did the "Winsock" fix according to the instructions and an IP reset via the command prompt, always with no success.

  I spent about the last 48 hours trying to get this update with no luck, I finally met a thread with a post that seems to fix the problem for Vista, but I need the version of Windows 7 which has not been registered.  A member of the community had provided a link to download the driver I can't find for the life of me.

  I'm typing this from my laptop (not the PC having problems) and it internet runs fine on this legacy without problems as are all other currencies clung to the same internet connection. The PC in question is the only one that is connected to the router, all the rest are wireless and work very well. (No wireless in the PC with the question card)  If I wired my laptop (with the same Ethernet cable that runs on the PC with the questions) my laptop connects to the internet and always runs very well.

  Any help would be greatly appreciated.

  Hello Dubz,

  Thanks for posting your question on the forum of the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  1. What is your default browser?
  2. What is the brand and model of your computer?

  I appreciate your efforts to resolve the issue.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  If you are using Internet explorer as default browser, then please use the suggestions provided in this Microsoft Knowledge base article and check.
  Reference:
  Internet Explorer does not start or stops responding
  http://support.Microsoft.com/kb/926449/en-GB

  Important notes:
  Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings. Reset Internet Explorer is not reversible, and all the previous settings are lost after reset.

  The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Also, please use method 2.

  Method 2:
  I also suggest you try the steps in this Microsoft support article and check.
  Reference:
  Automatically get recommended drivers and updates for your hardware
  http://Windows.Microsoft.com/en-us/Windows7/automatically-get-recommended-drivers-and-updates-for-your-hardware

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• PIX: Allowing servers in the DMZ access inside Server

  Hello

  I'm building a PIX 520 from scratch using 6.2 (2) and PDM 2.1 (1). I have 3 interfaces:

  outdoors (sec0) - xx.xx.xx.xx

  inside (sec100) - 10.100.1.0/24

  DMZ (sec10) - 172.16.254.0/24

  All was well with the modules until I started the task to allow the dmz hosts access internal hosts. I'm having problems as soon as I create an access for example rule:

  access-list permits dmz_access_in tcp host 172.16.254.20 host 10.100.1.35 eq ldap

  Problem 1:

  PDM alerts must be a static translation for 10.100.1.35 between the inside network and the DMZ. I would like the 172.16.254.20 server to the access server to the 10.100.1.35 using his real address of 10.100.1.35. Can I just give these commands:

  static (inside, dmz) 10.100.1.0 10.100.1.0 netmask 255.255.255.0 0 0

  dmz_inbound_nat0_acl ip access list allow any 10.100.1.0 255.255.255.0

  NAT (dmz) 0-list of access dmz_inbound_nat0_acl outside

  and then:

  access-list permits dmz_access_in tcp host 172.16.254.20 host 10.100.1.35 eq ldap

  Access-group dmz_access_in in dmz interface

  .. .will this work without problems?

  Problem 2:

  The rule of implicit outbound traffic to DMZ is broken - why? I need servers DMZ in order to access the internet without any discomfort.

  When I try and insert another rule to this effect, the following is inserted in the PIX config:

  dmz_access_in ip 172.16.254.0 access list allow 255.255.255.0 any

  This command now allows any server DMZ access all devices on my internal network! How can I solve this?

  I hope someone can help... Thanks in advance,

  Tariq.

  A problem 1, you don't need the nat statement 0 and correospnding-access list. The static method is sufficient.

  Problem 2: as you apply an access list to the DMZ interface, you must expand to include Internet access as well. If this is what you need, I would try something like this:

  access-list permits dmz_access_in tcp host 172.16.254.20 host 10.100.1.35 eq ldap

  access-list permits dmz_access_in tcp host 172.16.254.30 host 10.100.1.35 eq ldap

  ...

  ...

  etc. to allow the required access to the Interior.

  deny the dmz_access_in of the ip access list any 10.0.0.0 255.0.0.0

  dmz_access_in ip access list allow a whole

  Of course, you want to settle this as requires it.

• Network error mystery - Windows cannot access \\server\users when you use the netbios name, but works fine when you use the full domain name.

  Hi all:

  Mystery - I have a Win 7 work company that cannot access a particular action.  I get the following error-"you are not allowed to access \\server\users.  Contact your network administrator to request access.  However, these users can access these files successfully on other computers, and also if I use the fqdn or the IP instead of the "netbios name server", it connects successfully.

  Environment:

  -Workstation and server at the same time in the same AD Windows 2008 r2 domain.

  -All users, admin and non admin, cannot access this share when connecting to this computer only.

  -ACCESS to the other actions on the same server, as well as actions on other servers.

  -The biggest mystery to me - if I type the FQDN, \\server.domain.local\users, it works!  What the?

  I tried:

  -Deletion of the domain and add it again, no improvement.

  -Check Event Viewer, nothing jumps (not red or yellow).

  -Enabled auditing for access to objects on the server, it does not show a failure in the security event log.

  -Turn off the firewall of my computer.

  -UN-share and re - share the directory.

  -Give everyone full control (the fact that it works well with de facto authorities a little full domain name, a candidate little likely, but I have an open mind).

  For anyone wishing to offer their 'help' by asking me to make some sort of workaround as re - install windows or turn off netbios or use only of the full domain name here on out or whatever, please Don ' t bother.  I appreciate your help, but I am quite able to reinstall and I'm not interested unique hacks that affect this otherwise network well managed, I'm looking for a solution that will allow me to save time and is a long-term solution.

  In my view, that a key point here maybe I can connect successfully using \\server.domain.local\users, but not \\server\users.  Someone at - it some thoughts?

  In DNS server of youe, go to the area in question and in the use of select search before Wins wins tab and enter the address of your wins server if you have one. If not, install one.

• How to prohibit remote access vpn client to use the local DNS server

  Hello

  I'm on ASA5505 remote access vpn configuration.

  Everything works fine so far, except when the client got connected, he always used the local DNS server provided by the ISP.  How can I force the customer to use the DNS server configured on ASA?

  Thank you.

  Kind regards

  The command "Activate dns split-tunnel-all" is supported only on SSL VPN and VPN IKEv2. Since you're using IKEv1, this command is not supported.

  Here's the order reference:

  http://www.Cisco.com/en/us/docs/security/ASA/asa82/command/reference/S8.html#wp1533793

  You configure no split tunnel? If you are, then you need to configure "tunnelall" split tunnel policy, and that will force the dns resolution and everything else through the VPN tunnel.

• Proxy 11 g OAM with the Apache Web server

  OAM - 11.1.1.5
  Login page custom external action to the OAM Server presentation (hostname: port/oam/Server/auth_cred_submit) works perfectly. The same external custom login page by OAM url of proxy (proxy, oam, server, auth_cred_submit server) fails with
  OAM-02073: error checking if the resource is protected or not.
  Cause: The symbolic analysis of TPE has failed.
  
  Found newspapers: -.
  [oracle.oam.binding] [tid: [ASSETS].] [ExecuteThread: '1' for the queue: "(self-adjusting) weblogic.kernel.Default"] [userId: < anonymous >] [ecid: 8018442489f91c72:-19fbdf9:1370a7d3332 :-8000-0000000000001394,0] [SRC_CLASS: oracle.security.am.pbl.protocol.plugin.oam.AMHelper] [APP: oam_server] [SRC_METHOD: getAMRequestToken] Transport request Token: null
  
  Also scan newspaper it seems in the Return header variable: Cookie = OAM_REQ = Version... is missing.

  You must submit the OAM_REQ of the custom shape, see please Note 1281026.1 for more details.

  Kind regards
  Colin