The order of the station-role support

Similar Questions

• What is the difference between the role of support and the user role in the business group?

  I know there are a few differences between the role of support and the user role in the business as business group elements and Management group

  editable settings . But I can't find any document that introduces more precisely what they can do, what they can't.

  Are there any articles or documents or other means that can tell the specific differences between the Director, support and user group?

  If you have not taken a glance at this map permissions by GrantOrchard you should. It is very useful to know what permissions each user role. The big difference between the role of support and the user is that the user can only do things for themselves and user support can do things on behalf of other users. There is nothing quite as granular as you specified.

• Accelerated release of Firefox calendar is at the origin of the compatibility issues with our intranet applications - where can I find the terms of this annex, including the end of support dates?

  We are a University use an updated internal development of e-Learning applications which makes use of a framework rich client (ZK - www.zkoss.org). For reasons of compatibility with this application, as well as other general factors, we have standardized on FF 3.6 browser for all our desktop computers. Normally, we will review our browser selection once a year and make the changes/updates to compatibility level for 3 rd-party libraries we use and our own code, in order to address new developments in the browser market.

  However the FF of the new policy of difficult liberation our lives check. FF 6 came out just months after 5 FF. We perform an upgrade, we have to do a systematic series of tests, settings, changes etc. regression tests. The cost is not possible for us to do this every 3 months! So please can anyone point us to a clear release plan for FF that shows, for each version:

  a. Release date
  b. End-of-support date
  c. Release notes
  d. Compatibility in terms of HTML and Javascript/ECMAScript versions.
  

  https://wiki.Mozilla.org/RapidRelease/calendar
  
  https://wiki.Mozilla.org/releases

  New versions are will be released every 6 weeks, so until Mozilla announced they will do than support for a LTS version for business 'customers', you guys left to swing in the breeze as well as to be able to plan for the future with Firefox. I think that as long as the said decision is taken, support for Firefox 3.6 versions will continue. A 3.6.22 release is under development right now, probably for immediate release next week.

  As far as the end of support dates, as each new version is the version support ends for the previous version, with the exception of 3.6.x. currently Firefox 3.6.x and 6.0.x are the only versions that receive security updates. Firefox 4.0 and 5.0 is not 'supported' any longer.

• a reason for adding the station wifi?

  I have a mac additional wifi station and I got it in my living room where, on the net, I get a lot. the time capsule that broadcasts my wifi is in the office down the Hall.

  adding the station wifi in my living room will help with a question that mail get hung up and not updated?

  This will help the speed of my connection?

  I originally bought it for the trip, but I'm not find much use for it on the road and am thinking of using it at home.

  THANKS for any help

  adding the station wifi in my living room will help with a question that mail get hung up and not updated?

  Unlikely.

  This will help the speed of my connection?

  Maybe, probably not.

  Is your Mac faster when near the time Capsule, when in the living room?  There is a good chance, with a local access point will help.

  When you look at the WiFi menu bar icon.  You have full bars (good), or is it partial (perhaps a repeater would help)?

  If you 'Option' click the WiFi icon is your in-30, - 40, - 50 RSSI value '?  and your noise value in the - 80-90, you are actually pretty good.

  Then chances are that you get a signal strong enough.

  You can check all the contradictory signals in your area via 'Option', click the WiFi icon--> select Wireless Diagnostics

  In the Wireless Diagnostics menu find "Utilities", then select the Wi - Fi Analysis tab, or the menu will just sweep "Wi - Fi", you choose (depends on when Apple changed the Wireless Diagnostics menus.

  Performs a Scan of Wi - Fi will show you your's and your neighbor's WiFi access points.

  You want to focus on the channels, the RSSI and sound columns.

  Channels: You don't want to use the same channel as a neighbour, unless their SECURITY is very low (-70, of-80 to-90), _and_ your RSSI is strong (-30,-40,-50).  If it is a 2.4 GHz channel, you also a 5-channel separation between you is your nighbor harder.  Channels 1, 6 and 11 do not overlap and are common choices, especially if you have several access points in your home.  Once again, if the neighbors have weak signals, you don't really care, because you interfere not with them, and they do not interfere with you.

  5 GHz channels do not overlap and are also much faster than the 2.4 GHz channels.

  But that doesn't mean that you do not want to play with this material.

  We know the Apple Time Capsule.  Is the "wireless Station" an Airport Express?  Or some 3rd party WiFi router/AP to access?

  If an Airport Express Terminal, you can use Airport utility to extend your network.  Is not ideal, but easy to install.  Just make sure when you put the Airport Express is a place where it receives a good signal of the time Capsule, otherwise it's just trying to spread the wrong signal as it gets.  Wireless diagnosis can be useful to identify a good location.

  A performance-based approach is to run the Ethernet of the time Capsule to what is your WiFi Station.  Set up the device, then it shuts down its functions of router (Apple calls this 'bridge', other Mode to do this disable you DHCP and NAT services).  You give the WiFi Station a different channel (see above discussion of channel overlap).  You give the WiFi Station the exactly the same WiFi (SSID) name and the password.  Now you will have setup a network of 'Roaming', where the devices will pass you to a different when access point channel it uses currently becomes too low.

  This will help the speed of my connection?

  Another criterion for speed, is how fast your ISP connection vs how old is your WiFi router.

  If you use 5 GHz channels, you can then begin to worry about this when your ISP speed starts to become well above 50megabits/s

  If you use only 2.4 GHz channels, 15-25' ish speeds are OK on 802.11 g.  802.11n is a little more efficient and can tighten increasingly close to 40-50' ish speeds.

  If you have more than 100megabits per second, you want to have a router with 802.11ac protocols up-to-date and a newer Mac with 802.11ac support.

  This requires that you are the only consumer of your ISP connection.  If you share with your family, and there are lots of type YouTube and Netflix streaming, so your Mac doesn't have to have 802.11ac, but you don't want to a fast router in support of all the other devices sharing the bandwidth.  In this case a 2nd access point connected via ethernet can help share the problems of band radio bandwidth.

  I originally bought it for the trip, but I'm not find much use for it on the road and am thinking of using it at home.

  I have access to 5 GHz 802.11ac very cheap $10 point (not a router), I take with me.  I plug it into the ethernet port on the hotel or a router condo rented for give me a channel which is not sung from neighboring access points and shared connections.  I find that the hotel WiFi is often low, and you share the connection with a ton of other guests.  In a rented condo, you have tons of other condos all competing for 2.4 GHz channels (co-owners often get a cheap router 2.4 GHz 802.11 g, so everyone tries to find a channel not used).  Having my own 5 GHz WiFi access point means that I have no need to fight with others for bandwidth and the right channels.

  Just thought I'd pass that along.  And the wireless diagnostic tests are a great way to find out what the competition is where you stay.

• I bought a presario cq43-412tu. all the operating system supports this laptop. ?

  I bought a presario cq43-412tu. all the operating system supports this laptop. ?

  Hello

  Do you not need to run all the operating systems on the machine? With the help of VMware or similar is the way to go, but with this card, you don't have much choice, you must upgrade first to 8 GB of RAM. It comes with FreeDOS, you need at least a host operating system in order to run the virtual machine.  At this point, Windows 7 Pro or Ultimate is the starting point.

  Good luck.

• T61 Beep Codes at the STATION

  Hello all,.

  I have a T61 7662 - CTO with 4 GB of RAM, 100GB HDD, Vista Ultimate x 64, 128 MB NVIDIA Quadro graphics card.

  At the STATION, I get a beep code long, two short beeps.

  After a very unproductive call with IBM/Lenovo support I was told to run PC Doctor diagnostic tool that says my memory, motherboard and video card is fine.

  Two months ago, the motherboard has been replaced and the system worked very well. This problem started on Tuesday and the first time it occurred a BSOD appeared during its connection and unfortunately I couldn't take the error early enough before the memory dump.

  Any thoughts on this matter would be greatly appreciated.

  Thank you

  OK, the solution to this problem proves to be the Intel Turbo Memory. It is damaged and must be replaced. It should be tomorrow, but for the moment the beep codes went with removed turbo memory.

• VCAC 6.0, I can't add a USER to the AD Group to a company includes the user role

  IF I goto to MODIFY an existing group of companies, I can not ad any group Active Directory the "USER ROLE" on the bottom of the page, I'm not sure what I am doing wrong

  in the attachment, I try to FIND ad GROUPS, I see the users but not groups

  Thank you!

  Post edited by: quantum_2

  "" Message edited by: quantum_2 I also have the same problem with the "Group Manager ROLE" and the "support role" I can't announces an ad GROUP

  He can not see the group - I think that it is a known problem, type the name of the Group anyway, and press ENTER.  vCAC will throw an error if it does not recognize the name of the group.  vCAC didn't need to 'find' the name of the group to accept it.

• How to limit the rows returned from the user role-based interactive reports

  Hello
  
  I'm a new Apex-PL/SQL Developer, looking for some recommendations on how to implement an interactive report to display different lines in your current application ROLE service.
  
  For example let's say you have an application for orders and 2 different roles: superuser and sales-rep
  
  Now, if super user connects to the application, it should be able to see all the rows in the orders table, however, if the user 'john' connects with the commercial list, he should see those orders assigned to him.
  
  I don't think I can use "dynamic" sql and build my where clause on the fly if I choose an interactive report so I was looking around and came across the concept of a common function but it seems that some other people do this with collections of the APEX. Is there anyone with a recommendation for one to use? A few books I've read recommend putting most of the logic that you can on your database (easier to maintain in the long term) that's why I thought about pipep functions using, but I thought I would check with the experts first.
  
  Thank you!

  If you are allowed to use an Enterprise Edition database and to apply these restrictions, through the entire application, or across multiple applications, then use of private virtual database (DPV), with the security attributes of PL/SQL Code to the initialization/cleanup APEX application to set and reset the settings in your application.

  Should you not use EE, then you can roll your own VPD use parameterized views.

  If the restriction is only required for this unique IR, then, simply use a union of two mutually exclusive predicates opportunities:

  select ...
  from orders su
  where :app_role = 'super-user'
  union all
  select ...
  from orders rep
  where :app_role = 'sales-rep'
  and rep.salesman = :app_user
  

  All of these approaches should outperform functions in pipeline, collections, or a user-defined function (which, in a predicate that is executed for each line, mudra stopped the large datasets because of context switching).

• How to put the text in the cell and support in detail in read-only?

  Hello world
  
  In Hyperion 11.1.1.3, nobody knows how to put the text in the cell and the support of the details read-only after that the budgeting process is done in order to avoid people to change their comments.
  
  Thank you!
  
  Published by: Ouizmie on February 3, 2011 11:14

  There is no way to restrict the entry of text in the cell
  If you specify the description to charge you like details in support, which can be made read-only.
  but cell text comments to review, which can be changed. Even if you only read your form, users will be able to enter the text in the cell as long as they have access to the intersections of data...

  You can do a process to enter the descriptions of the charges, as supporting details only...

• How can I down the msn toolbar support for Mozilla firefox?

  My computer crashed and lost the msn toolbar. How can I down the msn toolbar support for Mozilla firefox? Edit

  It was more common to ask how to uninstall these toolbars. I think that it will now be known as a Bing toolbar, but as much as I know it is no longer supported for Firefox. You can find a few unofficial addons with similar features.

  You'd better discuss what anyone more about MSN Forum MSN specialist.

• system is not able to run the Apple Application Support service

  I can't install itunes on windows 7 32 bit. Any suggestions on Apple Support do not work. The system is not able to run the Apple Application Support service. Any suggestiones?

  Can you post the error message you get when you try to install or launch iTunes?

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  The more information box has direct links with the current and recent if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit - for older video cards) as a workaround for problems with installation or operation, or compatibility with third-party software.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• How to change the font colors in the communities of support?

  How to change the font colors in the communities of support?

  Thank you

  Press or click on use the Advanced Editor in the upper right of this text block which will take you to it.

  

• Problem with the help and support after Windows Update

  Hello

  After downloading some updates from microsoft, I now cannot open the option "help & support". It is said ' sorry Internet Explore cannot download / help.

  Anyone got any ideas how I could restore the option ' support & "?

  concerning
  Dale

  Hello

  It would be useful to tell us what operating system you have and what computer you have. Regarding your problem:

  who help and support option do you mean? Help windows?

  Moreover, already checked the website of microsoft? Would be useful for you since almost all topics around the windows are covered here.

  Visit this link for the support of the MS Web site: http://www.microsoft.com/europe/

  Welcome them

• Satellite Pro A100 - how to activate the shortcut keyboard-support on Vista?

  Hello. I've recently updated my satellite pro a100-828 to windows vista, and things work well to a large extent with two exceptions:

  1. I can't figure out how to activate the shortcut keyboard-support: media-keys to the left and the fn keys do nothing. There seems to be no shortcut keyboard-utility for windows vista in the drivers * tion. So what to do?
  2. the standby electricity utility is not available, which is good because of the power saver new vista. Except that I can't dim the screen, so the battery does not last me too long. How can I do this?

  Thanks in advance
  Best regards
  Christian

  Hello

  These problems can be solved in a few minutes. You only need the added package Toshiba. It contains the driver for the FN - key, Toshiba Power Saver and more useful tips.

  Here you can download:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Good luck! :)

• Satellite Pro 6100: which drive and the connection is supported - master, slave and CSEL?

  Hello

  I want to install a Pioneer DVR - K14L DVD burner.
  After installation, the notebook show me a
  error during initialization.

  It is possible to use this type of DVD Slimline burner?
  What kind of modus is important (master, slave, or CSEL)?

  Thank you and

  Best regards
  oelauge

  Hello

  I guess you get an IDE # 1 error message. Am I wrong?
  The fact is that not all readers are compatible with laptops.
  I don't know what parameters should have the caught player supported. But I assume that it might be a CSEL.
  However, I found this DVD - RW drive that must be compatible; the reference is P000366780
  http://www.getpartsonline.com/p000366780.html

  But unfortunately, there is nothing on the assignment of pins and settings.
  If you want to be sure of devices supported on your laptop computer at 100% so you should ask the Toshiba service partner in your country for details