The OSB error codes

Similar Questions

• I can't drag and drop files in the trash, error code-43 is detected, what should I do?

  I can't drag and drop files in the trash, error code-43 is detected, what should I do? What is an error code - 43?

  You can't empty the trash or move a file to the trash

  If the above does not help, then see below:

  Visit The FAQ XLab and read the FAQ on the waste problems. You can also try using Trash it! 5.1 to solve the problem. Or you can try this:

  Open the Terminal in the Utilities folder, and paste the following at the command prompt:

  sudo rm - Rf ~ /. Trash

  Press RETURN. Enter your administrator password when prompted. It will not echo to screen. Press RETURN again.

  (Someone should tell you that it is dangerous or useless, please disregard the comment.)

• Executable cannot find the custom error code file

  I'm building a LabVIEW 2013 application on a Windows 7 computer and deploying it to a Windows XP computer. My application has a custom error code file, stored in -- errors.txt, but my executable on the Windows XP machine can't find the custom error file and returns only the string of appeal for all errors that occur.

  When you use is not an installer, I tried to copy the error code at all locations listed here: http://digital.ni.com/public.nsf/allkb/6077DBEDA4F9FEE3862571F600449501 but the application still does not load the custom errors. I have the box checked to "Error Codes customized Include" in the construction specifications.

  When an executable of construction and the development of Windows 7 to XP, where do I put the custom error code file? It is found in Program Files (x 86), but find not because it's XP?

  It's been a few months that I posted this question and I do not know if someone cares about this track, but the solution I found was to put the custom in error code file \National Instruments\Shared\Errors\English\

  There are other places that the runtime will look for the custom error codes (I tried all the ones listed above), if the same error codes exist in 2 places the error popup will appear two error messages. Error default 1, it looks like:

  LabVIEW: An input parameter is not valid. For example if the input is a path, the path can contain a character not allowed by the operating system such as? or @.
  =========================
  NOR-488: Command requires GPIB controller charge controller.

  So if you have a custom error code file and it is available in 2 places that LabVIEW RTE check error codes, you will get the same message before and after the =.

  List the error as "still included" file when building the executable or by checking the box to include files in error did not tour, obviously. Unless you create a Setup program to distribute the application, the error code file must be moved manually. Shared\Errors file works best for me because it's a place that makes sense.

  Also, don't worry - it doesn't me taken 5 months to understand this point, I do not update all my loyal followers (ha) with a solution.

• Irulu Tablet-im trying to install applications like facebook and he repeats the 0x803F7000 error code and this applies to any application in the store

  Help please try to install my new Tablet irulu and the app store will not let me install anything k get the 0x803F7000 error code

  Moved from the community involvement Center

  Help please try to install my new Tablet irulu and the app store will not let me install anything k get the 0x803F7000 error code

  Moved from the community involvement Center

  It's an Android tablet, no? The Microsoft Community is not the best place to get help with Android.

  Try to support at https://www.irulu.com/

  or

  the Forum of Irulu to the http://forums.androidcentral.com/other-tablets/236406-irulu-tablet.html

  Don

• Windows Update fails to run and get the C800044E error code

  Windows Update does not check the updates and I get the C800044E error code.  So far, thi is what I did:

  Get the C800044E error code when you try to run Windows Update.  Tried Mr. FixIt, who did not work and tried to do what does not work also:

  Please, try the following suggestions to see if the problem can be solved:

  1. click on Start, type notepad in the start search box and press ENTER.

  2 copy and paste (or type) the following command lines in the Notepad window:

  net stop wuauserv

  CD %systemroot%\SoftwareDistribution

  Ren Download.old download

  net start wuauserv

  3. on the file menu, click on record under and type Rename.bat .

  4. click on save as type and then click on all files (*. *) .

  5. save the Rename.bat file to your desktop.

  6. right click on the Rename.bat file, and then click run as administrator .  If you are prompted for an administrator password or for confirmation, type the password, or click continue . It renames the download folder.

  7. try to install the updates again.

  8. If the problem is resolved, delete the Rename.bat file that you created in the previous steps.

  any other ideas?

  Quote your full version of Windows (for example, WinXP SP3;) Windows XP 64 - bit SP2; Vista SP1; Vista 64 - bit SP2; Win7; Win7 64 bit) when you post in a forum or a newsgroup. Please do it in your next reply.

  Is this a sudden, new problem?

  Are you having difficulty he run in http://support.microsoft.com/default.aspx/kb/971058 and don't you run it in default and aggressive modes?

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  A (another) Norton or McAfee application has already been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• VISA IC returns the 0xBFFF003A error code when reading the USBTMC device

  Hello

  I'm creating a USBTMC device and have some difficulty to determine why a viRead returns the 0xBFFF003A error code. Strangely enough, it reports also to read the correct byte number and the buffer contains the correct data. I use VISA IC 5.1.2 but I had the same problem with version 5.0.3. I have no problem with the device recognized by VISA IC, MAX, LabVIEW SignalExpress or LabVIEW. Using the previous version of VISA IC performing an async read would return a code completion, 0x3FFF009B (VI_SUCCESS_SYNC).

  The attachment of the utility Trace all communications from e/s or watch for when the USB cable is plugged into the computer.

  Lines 1-18 LabVIEW SignalExpress 2011 has begun

  Lines 19-35 VISA IC: open the selection

  Line 36 VISA IC: claire

  Line 37 VISA IC: Read - 10 characters

  Line 38 VISA IC: Read - 21 characters

  Lines 39-44 LabVIEW: open, read 21 characters

  Line 45 VISA IC: Read - 18 characters

  Line 46 VISA IC: claire

  Line 47 VISA IC: Read - 18 characters

  Line 48 VISA IC: closed

  Note: LabVIEW crashed on line 44.  At the moment I know not whether that is related to this problem or not.

  Full error description: failed to start the read operation because the installer is not valid (because of attributes defined in an inconsistent state).

  I'm confused by why it says it cannot start operation when in fact, it returns the requested data and attributes that it refers to? I reviewed the USB descriptor values that I use, and they look correct to me.

  Any ideas?

  Thank you

  Hi Perry,

  I found the problem.  The TransferSize didn't get converted from big-endian to little endian and 0x0A was considered 0xA000000.

  See you soon,.

  Airaki

• I get the following error code 80070bc9 when you try to do window upsdates

  I get the following error code 80070BC9 when you try to do a Windows Update. All of my updates have failed in the last three months and most have failed in the last six months. I found this problem when you try to install Itunes and received the error HRESLUT:0x8007054F. After researching this error, I was sharp may receive updates. Help, please.

  Hello Kristen,

  Follow the steps mentioned below:

  Step 1:

  Temporarily disable or uninstall the security software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Step 2:

  Reset components Windows Update the link below:

  How to reset the Windows Update components
  http://support.Microsoft.com/kb/971058

  Note: Click on run in the file download dialog box and follow the steps described in the fix it Wizard.

  Hope this helps

• Notice of default on Microsoft update for product SQL Server 2005 Express Edition Service Pack 3 (KB955706) and the 0x2B2F error Code

  I get a failure notice when trying to make an update of Microsoft for the product SQL Server 2005 Express Edition Service Pack 3 (KB955706) and 0x2B2F error Code.  What should I do?

  Deana E Hi,.
   
  Welcome to the Microsoft Windows answers Forum community!
   
  You receive the 0x2b2f error code when you use the web sites, Windows Update or Microsoft Update to install SQL Server 2005 Service Pack 3 on a computer with MSXML6 Service Pack 2 is already installed.
   
  Follow this link for the reasons: http://support.microsoft.com/kb/970674
   
  Follow the steps in the link below for "SQL Server 2005 Setup fails when MSXML Core Services 6.0 Service Pack 2 has been installed"
  http://support.Microsoft.com/kb/968749

  http://social.msdn.Microsoft.com/forums/en-us/category/SQLServer/
   
  I hope this helps!
  Thank you, and in what concerns:
  Aziz Nadeem - Microsoft technical support.
  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• Windows some updates not installed the 646 error code

  Windows some updates not installed the 646 error code

  See this previous discussion: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/5300b50a-dfcd-42fb-9785-ab52f2ee1796 ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• tried to download the Vista SP2, always get the 8024200f error code - what's the problem?

  What is the 8024200f error code? Vista SP2 is essential?

  [The] Norton [free trial had] has been expired for more than 1 year [before installing Avira AntiVir]

  Applications, (Norton and McAfee) are known to not uninstall (or upgraded) themselves.

  Ideally you would have uninstalled the free trial and then download / run the Norton Removal Tool and then installed the antivirus of replacement before the expiration of the free trial period.

  That being said, see if running the removal tool now & a few resets solves your problem:

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. right click on the file that you saved in #1 above and select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

  4 for good measure, reset Windows Update by...

  How to reset the Windows Update components?
  [Tip: run the difficulty mode by default and aggressive ]
  http://support.Microsoft.com/kb/971058

  NB: Access KB971058 via Internet Explorer (32-bit), not any other browser.

  5. also, for good measure, reset the IE advanced by http://support.microsoft.com/kb/923737

  6. restart & test.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Whenever I try to install these two windows automatic updates, I get the 8024200d error code

  I try to install the KB943411 and KB933928 updated, but I get the 8024200d error code. I'm running on Vista Ultimate (without SP1), and I do it through Windows Update.

  Hi BobTheDude,

  I suggest you to follow these steps and check if it does the work for you:

  ·         Follow the resolution 2 in the article
  http://support.Microsoft.com/kb/947366

  ·         Download and install the latest Windows Vista application compatibility update in the link mentioned below:
  http://support.Microsoft.com/kb/963699

  ·         Rename the Catroot2 folder

  To rename the Catroot2 folder, follow these steps:

  1.	Click Start type cmd and then click OK . Right click on cmd and then click run as administrator .
  2.	At the command prompt, type the following commands and press ENTER after each line: net stop cryptsvc Ren %systemroot%\System32\Catroot2 oldcatroot2 net start cryptsvc output

  ·         Empty the software distribution folder

  1.	Click Start type services.msc , and then click OK . Click right services.msc and then click run as administrator .
  2.	In the Services (Local) pane, click automatic updates , and then click stop .
  3.	Reduce the Services (local) window.
  4.	Select all the contents of the Windows distribution folder, and then delete them. Note By default, the Windows distribution folder is located in the drive : \Windows\SoftwareDistribution folder. At this location, the drive is a placeholder for the drive where Windows is installed.
  5.	Make sure that the Windows distribution folder is empty and enlarge the Services (local) window.
  6.	In the Services (Local) pane, click automatic updates , and then click Start .

  ·         Disable security software

  ·         You can download and install the stand-alone package includes updates that failed
  KB943411 - http://www.microsoft.com/downloads/details.aspx?familyid=A7BB4622-FB21-4769-B29A-7FC7A07D182A&displaylang=en

  KB933928 - http://www.microsoft.com/downloads/details.aspx?FamilyId=DC2AD07B-D5D7-407A-9A0E-3F3D142682D0&displaylang=en

  Please let us know if it helps.

  Thank you and best regards,
  David

• Ideas: I get the 0x80073AFC error code when I try to use the system restore then, how can I find and replace this file missing MUI?

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: I get the 0x80073AFC error code when I try to use the system restore then, how can I find and replace this file missing MUI?

  • I am running Windows 7 for packs SP 1 or SP 2 does NOT solve my problem since neither one works with Windows 7.  Is there a way to search for this MUI (Multiple User Interface) missing file? The every thing must have himself installed in the first place. I took my mom (she died in June) and my brother on this PC as users so even if they do not use this PC supports multiple users. Maybe if I deleted as a reboot and additional users it will solve my problems. My updates install OK but I can't run at all system restore. It creates a restoration point OK but when I try to sr back to a restore point before I get the error 0x80073AFC topic of the missing MUI file. Then, when I spear SR it is said that he could not and no files have been changed because of the error 0x8000FFFF error, unspecified catastrophic failure and could not retrieve the file several times when system restore is attempted.

    I'm running Windows 7 on a HP Pavilion with browser Firefox 3.6.8 browser Opera 10.60, IE8 and Google Chrome 5.0.375.125 browser browser.

    Can you tell me what I try next? Thnks a lot and sayonara for now the guy-Jack McElwee / keimanzero the Scion of the Anime in Brookhaven PA - USA

    OK I tried everything and nothing works! Only added beginners are updated browser Opera 10.63; IE9 (Beta); Firefox 3.6.12 and Google Chrome 7.0.517.41 and Java 22. Of course like everyone else in the world, I had to uninstall/enable and disable/download again and reinstall new Adobe Flash 10 and 11 of the shock wave and they keep crashing too! Hello 4 keep screwing browsers and now I get connection network problems. I run Comcast doctor and did everything it said to do, but nothing works. Oh and I added 7-Zip and WinZip also. Likewise, they will not work! Help! Thanks - K & K

  keimanzero,

  Comcast of Norton Security Suite version is installed? If Yes, who and perhaps malware is most likely to cause questions you have published, in particular the failure of the restoration of the system.
  First, configure the system to boot - How to solve a problem by performing a boot in Windows Vista or in Windows 7
  NOTE: Start-up mode minimum state all the 3rd party firewalls will be disabled. Open Control Panel > Windows Firewall to make sure that the native firewall of Windows 7 is now on.

  Download and Save the update system (or CheckSUR) tool. You will need to download the specific Version of CheckSUR corresponding to the architecture of the system to Windows 7. If you do not know the architecture of the system, and then click the link that says "Click here to show or hide the instructions step by step with images" under method 2: download the update directly system preparation tool from Microsoft Download Center .
  Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

  Once the download is complete, close all open programs and browsers. Now, run CheckSUR with the system connected to the internet because it will download the .cab for system files. Reboot once CheckSUR is complete.

  Secondly, I suggest that you run the File Checker system while in the same clean boot state.
  To run the System File Checker tool, follow these steps:

  1. Click Start and type cmd in the field search programs and files .
  2. Right click on cmd.exe in the programs of list, and then choose 'run as administrator '.
     If you are prompted for an administrator password or a confirmation, type your password or click on continue.
  3. At the command prompt, enter the following line exactly as written including the space between thec and the/and then press ENTER:
     sfc/scannow

  When the analysis is complete, test to see if the problems facing the system have been resolved.

  If they are not, you will need to contact Norton support for the version of Norton Internet Security Comcast to get help, or just uninstall NIS, run the Norton removal tool (right click Norton_Removal_Tool.exe, choose "Run as Administrator"), reboot and then check to see if the problems are still occurring.

  Expert MowGreen Windows IT Pro - consumer safety

• Where in the event error Codes BSOD Windows XP store Viewer

  As the title States where Windows XP Professional SP3 with 0 x 86 stores the error logs when a blue screen happens? I can not find I checked in the system log, but could not yet identify the BSOD error codes. I activated to connect with these error codes when it occurs.

  Can someone tell me where to find the error codes to stop Windows (BSOD)? Also, if you can describe what the entry will look like it should help.

  Thank you

  Victor

  VM

  You have several questions.

  1 - this one accident was linked to Redlight. sys with description BufferZone Kernel Module is a driver file of the BufferZone belonging to BufferZone product company.  That needs to be removed (at least for testing)
  
  2 - cumon
  Associated cumon.sys driver filter system provider (R) Win 7 kit Windows DDK CRCMon (it's a minor issue)

  3 - cmuda.sys related to cmuda.sys C-Media Audio Driver (WDM). YOURS IS 2002

  How to find drivers:

  
  -Google search for the name of the driver
  -compare Google results with what is installed on your system to determine on what device/program, it belongs to
  -Visit the web site of the manufacturer of the hardware or program to get the latest drivers (do not use Windows Update or Device Manager Update Driver function).
  s ' there is difficult to locate them, post back with questions, and someone will try and help you find the right program

  The most common drivers are listed on this page: driver reference

  http://www.carrona.org/dvrref.php

  http://SysNative.com/drivers/

  -Driver manufacturer links are on this page: http://www.carrona.org

• Update of MS by giving the 0x8024402C error code when upgrading to the new MS update schema

  I use a completely updated version of XP Professional.  I run an independent firewall

  Update MS used to work until he told me I had to go to the new version.

  Currently I get the 0x8024402C error code.

  I used the program of fixit MS for update problems. Whenever he claimed to correct the error. But it did not work.

  I followed the correction suggested to clear the exceptions lan then use the cmd line to stop and restart the update service. did not work.

  Fix used who said lan value automatic dectet, and received the 0x80072EFD error. Put lan affecting original return and went back to the original error code.  Any other ideas?

  Hi robertTrinitie TCh.,.

  Thanks for posting in the Microsoft Community.

  I understand that you cannot install the update of windows, and you receive the 0x8024402C error message

  I suggest you to see link and check.

  0x8024402C error code when you try to install updates on Microsoft Update or Windows Update Web sites

  http://support.Microsoft.com/kb/900936

  See also:

  Try to reset the Windows Update components

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 how to back up and restore the registry in Windows

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  See also:

  You may receive an error message when you search for available updates on the Windows Update Web site or on the Microsoft Update Web site

  http://support.Microsoft.com/kb/883821

• I get the CO1033 error code in Outlook Express.

  I got the CO133 error code in Outlook Express. I can receive emails, but I can't send them. I also about 25 000 emails I receive is no longer, so I can't delete them even more. What is the cure?

  original title: CO133 error code
  "Lawrence220" wrote in message News: * e-mail address is removed from the privacy * _programs...
  I can't have emails, including the 25,000. The Inbox is empty. How can I delete the Inbox without losing my emails?
   
   
  When you click the Inbox, can't you see no message? It is not empty, just corrupt because of bloating. OE has a limit of 2 GB per file.
   
  Follow the instructions I gave you, but rather than delete the Inbox.dbx file, rename it to Inboxold.dbx. Now when you open OE, you have an Inbox again and empty.
   
  To retrieve your messages saved, you have a bak file in the trash, or you may need a tool.
   
  After the return when you have completed the above. I will be probably gone for the night, but will come back to no response that post you tomorrow, as soon as possible.