the output is not displayed. !!!
Asked me to add two new fields to existing employees Info page:1.AQAMANO (it is essentially a person here in Saudi Arabia identification number)
2 license ONLY
It's trigger (when_new_record_instance), which has been essentially present prior to Amendment
Start
Select stsename in: project
of branch_vu
where stcode =: ebrch;
exception
When no_data_found then
null;
end;
Start
Select stlename in: Ccenter
of cc_vu
where stcode =: ecost
and stoffcode = 'C ' | : ebrch;
exception
When no_data_found then
null;
end;
Start
Select stlename in: nationality
of nationality_vu
where stcode =: enati;
exception
When no_data_found then
null;
end;
--
If: eeduc is not null
then
Start
Select substr (stlename, 1, 13): education
of gsav.systab
where soccode = '01'
and stappcode = 'PP' and stoffcode = 'EDU '.
and stcode =: eeduc;
exception when no_data_found then: education: = ' *';
end;
end if;
--
If: erelg is not null
then
Start
Select substr (stlename, 1, 13) in: religion
of gsav.systab
where soccode = '01'
and stappcode = 'PP' and stoffcode = 'REL '.
and stcode =: erelg;
exception when no_data_found then: religion: = ' *';
end;
end if;
If: ejobt is not null
then
Start
Select substr (stlename, 1, 15) in: employment
of gsav.systab
where soccode = '01'
and stappcode = 'PP' and stoffcode = 'JOB '.
and stcode =: ejobt;
exception when no_data_found then: job: = ' *';
end;
end if;
If: locid is not null
then
Start
Select stlename into: location
of gsav.systab
where soccode = '01'
and stappcode = 'MS' and stoffcode = 'CIT '.
and stcode = nvl(:locid,0);
exception when no_data_found then: location: = ' *';
end;
end if;
Start
Select to_char(ecntexdt,'DD/MM/YYYY') in: enddate
of pexmast
where empno =: key_block.key_item;
exception when no_data_found then null;
end;
Now, I need to get the number of LICENSE n AQAMANO of pexmast table with col name of tha table:
1.EIQANO (the name of col AQAMA No.)
2.EDRVNO (the name of col for drving llicense No.).
I wrote the code below in the trigger (when_new_record_instance) and becomes a successful record compiled, but AQAMANO and DRVVINGLICENSENO files are not displayed on the page of the emp...
declare
aqamano number (20);
Start
Select eiqano from aqamano
of pexmast
where empno =: key_block.key_item;
exception when no_data_found then null;
end;
declare
drivinglicenseno number (20);
Start
Select edrvno from drivinglicenseno
of pexmast
where empno =: key_block.key_item;
exception when no_data_found then null;
end;
I would really appreciate if someone can help me with the code... the thing is that I am a newbie with oracle 6i n have just small idea... !!!
Hello
View or text filed and give them that the ouput.
Add this code and run it, and view the result.
You can simply your code like this.
begin
select to_char(ecntexdt,'DD/MM/YYYY') ,eiqano ,edrvno
into :enddate,*aqamano,drivinglicenseno* --- these are local variable
from pexmast
where empno = :key_block.key_item;
exception when no_data_found then
Message('No Record For that key value');
Meaasge(' ');
Raise form_triger_failure;
end;
Published by: Baba delighted on August 17, 2009 01:45
Tags: Oracle Development
Similar Questions
-
The documents are not displayed
My items in the Documents are not displayed.
I recently downloaded OS X El Capitan. The problem might be related to that?
Thank you very much.
Have you tried a Spotlight search for the name of one of these files?
-
Icons, twitter bolts on the site are not displayed?
According to the bounding, icons pictures, twitter bolts on the site are not displayed?
Help please?Many sites now use downloadable fonts to create their icons instead of the traditional image files. So, there are some Firefox settings that might be a factor, as well as the NoScript extension, if you use this (blocked objects).
(1) in the dialog box fonts Advanced, unchecking the checkbox which allows the site to use its own choice of fonts. To check that:
"3-bar" menu button (or tools) > Options > content > button "Advanced".
Here you must "allow pages to choose their own fonts.
(2) on the deactivation of fonts downloaded in: config. It's less likely, or you remember probably not, but here's how to check on it.
- In a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.
- In the search box at the top of the list, type or paste the gfx and make a pause so that the list is filtered
- If gfx.downloadable_fonts.enabled preference is bold and user, set false, double-click it to return it true.
This seems useful.
-
Display of Firefox about that clients site problems:
http://gardenia.dk/collections/collection/The photos are not displayed correctly in Firefox - only a very little bit of the image is visible, bad scale (displayed correctly in Safari and Google Chrome).
Can I do anything to make it work in Firefox, too?
Kind regards
AnnetteYou do not see the thumbnail, but the big picture because the width of the thumbnail image is set to 500.
Add code to the userContent.css file.
The file userChrome.css (UI) customization and userContent.css (Web sites) are located in the chrome folder in the Firefox profile folder.
@-moz-document domain(gardenia.dk){ a.thickbox > img { width: 120px !important; } }
-
I get emails with pictures and when I send them to others. they open
their place but the images are not displayed. The photos are there when I send a
them. Thank youMake sure that your security software (antivirus) is not blocking attachments.
-
during the upgradation he automatically took backup to an external flash drive, now every time I have to run has previously program I have to insert this flash drive.
also all the shortcuts on the desktop are not displayed, and can be created, or any folder cannot be created so that the flash disk is reinsertedHi subhshy001,
Welcome to the Microsoft Windows answers Forum community!
Try this if you do not have
Windows Explorer to create the folders and shortcuts in your document folder, drag and drop them on your desktop.
If you have completed the steps and was not even useful,
Follow these steps:
Try to create a shortcut and sending it on the desktop.
(1) open: Start Menu ,.
(2) right-click: Internet Explorer icon .
(3) select: send to > desktop (create shortcut).There should be a shortcut on the desktop .
Make sure that the "show desktop icon" has a check against it
OR
Just click on the empty part of the desktop, choose new > then select the folder to create. Right click on this folder , select Rename it.
If the steps above do not work then:
You can scan your computer for malware.
You can download, install and update anti-malware free of your favorite search engine and find malware.
Important note: this response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.If the scan comes back clean, so I recommend doing a System File Checker too l to analyze your OS system files.
To help resolve this problem, use the tool (SFC.exe) System File Checker to determine which file is causing the problem and then replace the file. To do this, follow these steps:
1. open an elevated command prompt . To do this, click Start , click principally made programs , Accessories , right-click guest , and then click run as administrator . If you are prompted for an administrator password or a confirmation, type the password, or click allow .
2. type the following command and press ENTER: sfc/scannow (Yes there is a space after sfc) the sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions. This analysis do take some time to complete.Hope this information helped!
Thank you, and in what concerns:
Aziz Nadeem - Microsoft technical support.
Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think. -
How can I make sure my internet cable works even if the icon is not displayed by the clock
I see the wireless connection icon, but I used to see one for the wired connection also. So where is it?
How can I make sure my internet cable works even if the icon is not displayed by the clock?
Click Start > Control Panel > network and Internet > network connections.
Click with the right button on your Local network, and select Properties. In the window properties of LAN make you that these boxes are checked.
[] Display the icon in the Notification area when connected
[] Notify me when this connection is limited or no connectivity.
Click [OK] and get out of here!
Right-click on start and select Properties. On the taskbar and Start Menu click the taskbar tab, and then click the Customize in front of the Hide icon button inactive and it make sure that the option 'always show' for the local network is selected.
HTH,
NASS - http://www.nasstec.co.uk
-
How can I click apply when lower resolution when the window does not display the button apply because the resolution is too low
Hello
Try pressing the ENTER key on the keyboard instead.
See you soon.
-
sidebar on the desktop are not displayed images of only a red cross
sidebar on the desktop are not displayed images of only a red cross
Take a look at the following:
Sidebar will not run on start up
http://www.Winhelponline.com/blog/fix-Windows-Sidebar-does-not-start/
Component cannot start Windows VistaSidebar Gadget not working not properly
Note: look for responses from the veebull
and president of the DNA
http://social.technet.Microsoft.com/forums/en/itprovistadesktopui/thread/5d734cdb-757f-4801-8f28-3cca36ccf7baHow can I restore windows sidebar
http://support.Microsoft.com/?kbid=963010How to fix broken sidebar
http://www.howtogeek.com/HOWTO/Windows-Vista/how-to-repair-your-crashed-or-hanging-Vista-Sidebar/ -
Once the Interactive connection: not display last user name has been applied is it possible to reverse the trend. I want a few users to see their user names.
Initially, it was setup for the security but now a few users need to see who's online before.
Help, please
Hello
Thank you for contacting Microsoft Answers.
You do the following:
1. click on start.
2. type: secpol.msc and press ENTER.
3. go to local security policies / adjustment / security options.
4. on the right side to find Interactive logon: do not display last user name and change to turn it OFF.If the issue is not resolved, answer here.
-
Impossible to change the wallpaper, the location of the image does not display images.
Original title: photo location not display images
I'm trying to access my pictures folder and select a background for my office. But when I search for the location of the image and select the folder of the screen does not display images, even if the pictures are present in the folder. The screen shows only 'solid colors.
I moved to the location of my pictures, sounds and video to another folder. Then, the default folders are different.
In Explorer when I just click on the photos forlder ther is a location tab saying my it's the default folder.
One last thing.
If I go to explore and navigate to the folder my pictures, right click on a picture and select 'Set as wallpaper', then it displays the content and the folder.Any ideas?
JamesI got it working again.
And that's a good reason to not mess with the registry.
I have used a tweak registry to hide the libraries in the Explorer navigation pane. Once I've restored it Windows seems to have found the files for my photos. I then re - hid libraries and everything seems to work ok.James
-
Value of the product is not displayed in the list of installation prices and modifying Setup screens
Hello!
I wonder why did in the configuration list price and screens set up to change the value of the product is not displayed. What I use is a new clone and just noticed today this scenario. The value of the product used to appear on my old clone. Probably could have been changed?
Thank you.
We have recompiled the elements Flexfield system and it worked.
-
The Version 11 of PSE: Panel Album and the file is not displayed
After the installation of the EP version 11, the Committee of the album and the record is not displayed in the media pane. I can't find any way to select. What can I do?
manfredp21876409 wrote:
After the installation of the EP version 11, the Committee of the album and the record is not displayed in the media pane. I can't find any way to select. What can I do?
Look at the lower bar, 'View' icon to the left.
https://helpx.Adobe.com/PDF/elements-organizer_reference.PDF
-
The Explorer does not display a pdf thumbnails
The Explorer does not display a pdf thumbnails
Hi Ken,
With several comments from our clients and requests for the same thing, we have implemented return thumbnail preview.
With the update of October of Acrobat DC published last month, we added back support for PDF thumbnail previews in Windows Explorer for 32-bit systems.
Please note that by default, it is disabled. To activate the same, please go to Edition-> Preferences-> general and turn ON the thumbnail «Previews Enable PDF» checkbox in Windows Explorer
In a future update of the software Reader / Acrobat DC, we are looking at the possibility of adding back to back support of PDF thumbnail previews in Windows Explorer for systems 64 bit as well.
Kind regards
Rave
-
Just reinstall Photoshop CS5.5 of CD on Mac. On the opening of an image file, the program will not display the image. Thumbnails of the image appear in the layers window, but not the main window - ideas?
Join the Discussion of Photoshop discussion
Maybe you are looking for
-
I want to resize the text in the Apple support pages WITHOUT changing the page size
I spend a lot of time reading and learning on the Apple discussion forums, but all of a sudden my text size became too small. While I can easily adjust to the size of reading, which unfortunately also increases the size of the page and as a result I
-
Tecra M2: Can I replace laptops LCD screen SXGA +.
Anyone know if it is possible to change the standard XGA screen, I have in my Tecra M2 with a screen SXGA +. Do I need to change anything other than the LCD? Thank you very much.D
-
LaserJet MFP M127fw Pro: Original output cartridge
ONLY 1 100 PAGES PRINTED FROM THE ORIGINAL CARTRIDGEBought in early April 2016 - this seems to be VERY BAD PERFORMANCE for this type of printer. It is used for the purposes of the home based business - for most of the documents; some pages with photo
-
I have a 512-ES1-P84G with a handle leak when running Firefox
I have Windows 10 When you use Forefox version 45, 46 47 4th, even in safe mode, the number of handles for Firefox coults upwards forever. I have the factory Intel HD Graphics driver 10.18.10.4276 version There is a much more recent graphics driver a
-
Hi, I tried to install memeo backup of a product for a moment, I recentley purchased. I know that the software and the product is not damaged, because I am able to install it on other computers. Its my fault see tho, I have the seagate FreeAgent GoFl