The page is not redirecting properly when you use a redirect link

Similar Questions

• find on the page does not - nothing happens when you type

  Have now moved to the new laptop Dell with Windows 7 and installed new Firefox - tried to restore the setting but it didn't work so have restored my addons and configuration and customization.
  Well, everything seems to work except that "Find in page" doesn't seem to work at all.

  Well, you wouldn't believe it - I just press the 'Ctrl' key and start typing and it was there. I searched all over the pages of Support and the forum but could not find a solution, but it is now resolved. Not sure how I show as "resolved." Will try anyway thanks.

• Why do disappear from the things on the page, can not see even when you type

  When I hoover on any part of a page, it disappears. When I type in this box all the characters disappear. Sometimes half of the web page is gone and then goes back disappear again when I have the top cleaner.

  If I run in safe mode it seems to work very well, but then I lose my bookmarks and labels. I haven't added new addons since before this problem started.

  It happens on all websites that I opened.

  Hello

  Try disabling graphics hardware acceleration. You will have to perhaps restart Firefox for it to take effect, so save any work first (e.g. you compose mail, documents online that you are editing, etc.).

  Then perform the following steps:

  1. Click the menu button

     

     and select Options

  2. In the window of Firefox Options (or preferences), click on the Advanced tab, and then select general.
  3. You will find in the list of parameters, the checkbox use hardware acceleration when available . Clear this check box.
  4. Now restart Firefox and see if the problems persist.

  In addition, please check the updates for your graphics driver by following the steps in the following knowledge base article:

  • Update your graphics drivers to use hardware acceleration and WebGL

  ---
  If she did not help, then probably one of your extensions is causing problems. You can follow some tips in this article to help understand that one.

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox

  The problem occurred recently? It could be that an old extension does not play nice with an update of Firefox, or an extension recently update causes problems for some users.

  If your right click on your tab bar, you can bookmark all your open tabs in the window of a folder of bookmarks. Please see the article to see how you can save your bookmarks:

  • Restore backup bookmarks or move them to another computer
  • Export Firefox bookmarks to an HTML file for backup or transfer bookmarks
  • Importing bookmarks from an HTML file

  When find you what is causing your problems, please let us know. This might help others with the same problem.

  Thank you.

• How can I change the length of note by default when you use the keyboard as input in piano roll?

  Note the length of the input to the midi keyboard

  Use the keyboard to input stage (Menu bar > window > entry step keyboard) choose the length of the notes you wish to enter the Piano Roll in conjunction with your Midi keyboard...

  

  Turn on the input Midi in the Piano Roll, if you do not have...

  

  Now you play notes on your midi keyboard notes will be length whatever you selected in the step of keyboard input interface...

  Note: If you do not find the keyboard under the window input stage... All the features of Logic work... so make sure you that you have enabled ALL the advanced tools in logic preferences and available for you.

• In the Amazon, I get error message that the page is not redirecting properly

  When I try to view the details of an item in the Amazon, for example, a book, I get an error saying that the problem loading page. The page is not redirecting properly Firefox has detected that the server redirects the request for this address in a way that will never end.

  Year example of the URL causing this problem is https://www.amazon.co.uk/gp/product/0692394028?redirect=true & redirect = true & redirect = true & redirect = true & redirect = true & redirect = true & redirect = true & redirect = true & redirect = true & ref_ = gb1h_img_m-3_4447_e77918ec & smid = A3P5ROKL5A1OLE

  I tried an update of Firefox, I tried to remove and reinstall it. I tried to delete cache and cookies, but I still get the same problem. I use v42.0.

  Any help would be appreciated.

  Thanks for your reply.

  However, now that I have a working stable system I will not even try 42.0 but will wait until a newer version is released. Back to 41.0.2 also stopped all site accidents I knew (and reported) with 42.0 - sort of IMO, there are certainly issues with v42.0

• Folders of bookmarks in Safari in the Favorites bar not open click when you access one after another

  Question: The records of Safari bookmarks in the bookmarks bar not open click when you access one after another

  Diagnostic steps:

  (1) create 2 or more folders in the bookmarks with the individual sites in their breast.  (Examples of folder name: career, finances and health)

  (2) safari > display > display favorite bar. All the Favorites should be visible in the main window of Safari with all these files

  3) click on the folder named career and then go directly to Finance. (the record finance should open with a single click)

  (4) or try to open the folder of health directly after clicking on career record. The health record is expected to open in one click. This does not currently happen

  Currently, 2 click are required to open a folder in the Favorites bar. To activate the button and the second displays the Web sites it contains.

  It is annoying and seems as if the browser is obsolete.

  If opening cursor hover is not what apple wants for these records, we are fine with it. But the least we should do, it's that these files opens in one click.

  Thank you.

  Send feedback to Apple. They will not respond, but at least know that there is a problem. If enough people send feedback, it can become the problem solved as soon as possible.

  Your comments

• Have 2 printers on the computer and the PC will not print one when you switch to the other?

  Have 2 printers on the computer and the PC will not print one when you switch to the other?

  Having a printer at the office and one at home, but use the same PC for both? Unable to print at home after bring you it to the office (and vice versa)?

  If you USB, most of the time, the PC will recognize what printer is which. Sometimes PORTS does not commute. You can manually change the correct ports if necessary.

  CLICK ON THE MENU START

  1 devices and printers

  2 right CLICK on the printer

  3. choose the PRINTER PROPERTIES

  4. click on PORTS

  5. There will be a list of ports with one (checked marked). If it's on the wrong port, change to the right pair and choose APPLY.

  (NOTE: it must ALWAYS be on a USB port or a wireless connection.) Some ports wireless start with a #(adresse IP) or a SERIAL number)

  I hope this helps. Sometimes, you can create your own port if you have more questions.

• Built in mic on my Aspire 5738ZG do not work properly when I use Skype. I'm on windows xp.

  Built in mic on my Aspire 5738ZG do not work properly when I use Skype. I'm on windows xp, 32 bit. I installed the drivers Audio Realtek Acer official website but the microphone is still very low. Other people have said that they hear me very bad when talking on Skype, for example. What can I do?

  You must check the Panel realtek on Mic Boost.

  I don't know what version you have, but you can find some practical information to search on youtube on "realtek mic boost.

• Why do the mouseout/mouseouthandler() and mouseOver not work correctly when you use a dynamic textfield?

  Hello
  
  I made a movieclip with instance name: cs_btn
  
  Inside of that movieclip, I have two layers. Bottom and top button dynamic textfield.
  In this scenario, I have a 'more' 'out' 'down' and 'up' labels image.
  
  It works fine, but when I use a dynamic textfield, the passage of the mouse and the MouseDown event are triggered
  also when you hover over the textfield object. Even when I turned the selectable property.
  
  Any idea of what is the cause?
  
  In the main timeline, I made this script:
  
  function cs_buttonEvent(event:MouseEvent):void {}
  
  trace (Event.type);
  
  Switch (event.type) {}
  case "mouseDown":
  event.currentTarget.gotoAndPlay ("down");
  break;
  case "mouseUp":
  event.currentTarget.gotoAndPlay ("up");
  break;
  case 'mouseOver ':
  event.currentTarget.gotoAndPlay ("over");
  break;
  case 'mouseout/mouseouthandler() ':
  event.currentTarget.gotoAndPlay ("out");
  break;
  by default:
  trace ("mouse five event");
  break;
  }
  
  }
  
  cs_btn.addEventListener (MouseEvent.MOUSE_DOWN, cs_buttonEvent);
  cs_btn.addEventListener (MouseEvent.MOUSE_UP, cs_buttonEvent);
  cs_btn.addEventListener (MouseEvent.MOUSE_OVER, cs_buttonEvent);
  cs_btn.addEventListener (MouseEvent.MOUSE_OUT, cs_buttonEvent);
  
  

  You can assign the check fake gold button mouseChildren property the
  target in the event handler.

  function cs_buttonEvent(event:MouseEvent):void {}

  If (event.target! = cs_btn) return; bug out

  trace (Event.type);

  Switch (event.type) {}
  case "mouseDown":
  event.currentTarget.gotoAndPlay ("down");
  break;
  case "mouseUp":
  event.currentTarget.gotoAndPlay ("up");
  break;
  case 'mouseOver ':
  event.currentTarget.gotoAndPlay ("over");
  break;
  case 'mouseout/mouseouthandler() ':
  event.currentTarget.gotoAndPlay ("out");
  break;
  by default:
  trace ("mouse five event");
  break;
  }

  }

• To access the properties of an Error Message When you use the DisplayRunTimeErrorDialogEx method

  I have a reminder that displays the standard runtime error dialog box using the method Engine.DisplayRunTimeErrorDialogEx of custom error. http://zone.ni.com/reference/en-XX/help/370052H-01/tsapiref/reftopics/engine_displayruntimeerrordial....  The parameters of this do not allow me to specify information about the error message available (via the properties of the stage of the appeal of error).  However, when built-in bed in treated TestStand display dialog runtime error through its methods of error handling he managed to fill in the details about the error.

  Anyone know how I can fill in the details and the error code from the dialog box fields when you use the DisplayRunTimeErrorDialogEx method to call it? See attached screenshot by one example of what I get when I use this method.

  Kind regards

  David

  Doug is correct; each sequence in the call stack has its own sequence context, so if you just "ThisContext" for the sequence context parameter, you provide the framework for the error callback, which has no error.  To access the context of the sequence that wrong, you use the caller property to get to the next level in the call stack, for example:

  RunState.Engine.DisplayRunTimeErrorDialogEx ("error Dialog", ThisContext.Caller, 0, False, False, False, False)

  I hope this clarifies!

• Taskbar of Windows 7 is not pop up when you use Google Chrome or iTunes

  Chrome version: 18.0.1025.58 beta-m iTunes Version: 10.5.3
  Other readers of browsers / multimedia tested: 5:OK Safari Firefox 5: OK IE 9: Windows Media Player 12 OK: OK Quicktime 7: OK problem?: Taskbar hide automatically, the value does not appear when you use Google Chrome or Apple iTunes what is the expected result? The taskbar will rise, allowing you to use your other windows what is happening instead? It remains hidden, forcing me to press the Windows key to open it additional information: iTunes has done this for a while, Chrome of the noticed the other day. My Windows IS personalized (Windows logon background start Orb has changed.) Also twisted with Ultimate Windows Tweaker Windows Version: Windows 7 Home Premium x 64 material: HP Pavilion dv6-600 4 GB RAM 500 GB HDD Intel i5 @ 2267 MHz (2.7 GHz) processor
  
  

  Hello

  Were there any changes made recently to the computer?

  Try the following steps.

  Method.

  Step 1

  The Advanced Boot Options menu lets you start Windows in advanced troubleshooting mode. You can access the menu by turning on your computer and pressing the F8 key before Windows starts. You must start the computer in safe mode with networking and then check out.

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  Step 2

  Put your computer in a clean boot state and then check

  http://support.Microsoft.com/kb/929135

  Note: Follow step 7 to your computer as usual.

  Hope this helps

• Unable to get into the MSN account or by mail WHEN you use Norton connection for security reasons. I can't add attatchments.

  I use Norton Secure login. MSN & mail is the only site that I can't access. This mind by scary business monitoring, MSN? Sorry ' end that.  I can't add attachments to the e-mail message. Apparently, there are many of us with the problem of attachments. Why I use msn? anyone?

  Hello

  Thanks for posting the request in the Microsoft community forums.

  It seems that you are not able to MSN account or by mail when you use the connection of Norton.

  You can try to disable Norton antivirus installed on the computer and check is that you are able to connect to MSN and email.
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
  NOTE: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable the antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  We know if you need help with Windows. We will be happy to help you.

• The page is not redirecting properly

  I've been on Dailymotion watch Doctor Who classic. I went to click on the next part of the episode and the page shows "page isn't redirecting properly..» I've deleted all my cookies, allowed for cookies to be accepted from dailymotion, but none of these things have worked. I still get the same message.

  Hello

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  Note: This will make you lose all the Extensions, open Web sites and preferences.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

  Thank you.

• The function does not properly when you use the shortcut to insert

  Hello everyone. I am using first Pro CC V9.2 on a PC.  I am as well as a Lynda tutorial and told me quite clearly that using the comma key insert a subclip in my sequence.  However, using the shortcut brings in the full clip, not the sub.  I just bring my subclip using a drag and drop, which is really slow me down.  Anyone know what this could be?

  When you perform your subelements, you Restrict toppings to the limits of a verified subitem?

  

  MtD

• Keyboard not working not properly when you use the Internet (32-bit vista)

  Whenever you use the Internet, keyboard keeps freezing upwards, types of all other letters or type any. Works totally fine when you type off the Internet. Issue of DEF. No material. Looks like that is that some Web sites (facebook is really bad, for example, the forum of the site as well - still holding type this message upward!). Maybe some code that inteferes? very frustrating.  any comment is appreciated.

  Look here:

  a few things to check, possibly more,

  reduce the sensitivity of your touchpad
  Check frequently for updates on the keyboard driver,
  and type faster, the cursor allows a few seconds before it locks in, then move it out of the way...

• URGENT... BUG in scrolling doesn't work not as expected when you use the navigation

  Hello

  I created this site for a client. He was literally works fine an hour ago. I just went to the post, and now when I use navigation, all my images, go to the left, even though I put them to fill.

  What could possibly get there? I'm supposed to show them this site tomorrow and now I can't. If you have any ideas, let me know.

  NOTE that this only happens when I use navigation. If I scroll it works. It is, however, very nervous.

  Home

  and here is the file:

  Dropbox - MicrositeRedesign02.zip

  Thank you

  Dave

  This behavior is caused by the white dots on the right side of the page master, forcing the content area (and thus the scroll in the browser area) is much wider than what you want.