The Participants allow the pointer in a sharing module?

Similar Questions

• Planning of the migrated to dev app still points to prod shared services.

  I have a 11.1.1 planning app to the dev who has been updated from prod by creating the app dev, restoring production Plannning app sql databases dev server, copy the prod dev essbase outline.
  
  My main concern is that the app always seems to point to prod SSP when you look in the advanced settings, under Shared Services settings. I tried to change the shared path to dev services. When I try to save changes I get ' year error occurred while processing this page.» Check the log for details". I don't know where is this newspaper. I see the path that points to prod in the table HSP_SYSTEMCFG under EIE_SERVER.
  
  I'm a little nervous to play with this because the last time that I trashed production shared services.
  
  Any advice would be greatly appreciated.
  
  Dave

  You can go in the relational table and update to the correct address of shared services, you will need probably need to restart the schedule service so that when you view it in the web planning it shows the correct url.
  It takes nothing to worry in this regard does not mean that your application is registered for bad shared services.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• How to disable the charms to the point bar Windows 8.1

  I have a new HP laptop with Windows 8.1. I HATE the charms bar. It is very annoying. I have disabled the function of the angle of the bar charms appears is more that if I drag the edges of the corner, however, it pop again randomly. I'll be typing along and it will just pop up, blocking everything I am.

  I have absolutely no need of this bar of charms. In fact, the only thing that I used it for is to get to the option to disable them. However, on this laptop, which is not completely disable them... I tried to go to control panel mouse to turn them off, but this option is not available. However, I don't think it's the mouse pad, forcing them to pop up even when... I'll be typing along, not even touch the carpet of mouse, and all of a sudden they're going to pop up.

  What is the cause of this and how can I get rid of him? I'm getting rather desperate and sometimes feel compelled to throw this laptop out the window! I prefer my laptop HP Windows XP and has replaced only because XP is no longer supported... 8.1 window is one of the most frustrating systems, with that Microsoft has developed.

  Please help me turn off these dang for good things!

  UPDATE: I think I found the solution. I received this link a Microsoft Chat line employee. I followed the instructions and the charms seem to have disappeared... YAHOO...

  Here is the link:

  http://winaero.com/blog/how-to-disable-the-edge-panels-charms-bar-and-switcher-in-Windows-8/

  UDATE UPDATE: lol... I posted this below, but repost here... The solution given by the employee of Microsoft Chat line did not work... Well, it worked for a day, I arrested him for the night, and when I turned it on in the morning, the charms were back with a vengeance... Seriously, worse than ever, jumping constantly.  It was as if they were really angry...

  I went to Wally World and bought a $ 16 wireless mouse, which keeps the charm in the Bay... In fact, I think it's easier to use than the mousepad on my laptop anyway. I can use it on the arm of my chair on my laptop beside this mousepad, on a desktop (obviously), but the point being, unless I run the cursor at the very far right of my screen, the charms are hid...

  I have a business Web site, and all working on it, the charms have been constantly popping up as I tried to add images and descriptions. He took me seriously out of my mind... Everything took me twice as long to add, I don't waste time... I worked on it this morning using the wireless mouse and the charms bar jumped not once...

  Thank you Paul, but this link just tells me to do what I've already tried... When I tried to get responses on the Microsoft Windows site, it says that all laptops are different, and I would need to go the manufacturer of my laptop to tell me how to disable... So, I'm here, but nobody seems to know how to stop these things pretty darn... It is really ruining my experience with my new laptop... It's like the use of a laptop being shared with another person who constantly interrupts what I do...

  OPPS... while I was writing that I expect a person on the microsoft online chat to connect so I could ask them how to disable the...

  Rachel from Microsoft came... She sent me this link:

  http://winaero.com/blog/how-to-disable-the-edge-panels-charms-bar-and-switcher-in-Windows-8/

  I did what it said to do, and I'm typing this, no charms have jumped at me... Maybe it solves the problem (hope, hope).

• The search in a table 2d-coordinates for the point of click

  I'm doing a VI that creates a layer of 2d points on an image imported (as pictured). These points are generated by a Subvi, which simply draws points over and over again (based on the 3 selections of initial angle). All the coordinates of the points are stored in a data feed that is sent to a registry change for other future functions. Each coordinate corresponds to an electrode, labeled 0-255, goes into the lines first (although that could change, but I guess it would be easy to change). Labels are created through 2 loops (as seen in diagram 1).

  I would now like to click on a particular point and put it out in a different color, but also an indicator show me what electrode I clicked. I seem to be at a loss on how to do it! I need explore a table 2d-2 groups of the element, where she looks for the line first, then the corresponding column (or vice versa, it is not serious, but just for ease of understanding, let's say she is looking X first, where the columns first) and compare them to 2 elements (the mouse click coordinates).

  Here's what I've done so far. I need to search for the function in the following way; If find X, look no further columns and select that particular column where the X was found and begins to look for the values Y and and then stops when the value of Y is. Once the two values are found, take these out of the loops and throw them in a cluster and the function of drawing lots.

  Thank you!

  p.s. in case anyone is wondering why I have the function "in the range" in there, it's so that the user does not have to be exact pixel this allows the user to click within 2 pixels of the coordinate of the point.

  Hi Daniel!

  What do you think of this approach?

  

  We subtract just the mouse coordinates in the coordinated range 2D (Array stores the coordinates of the points on the image), the absolute value and look for the minimum. X and y the selected point index is returned in minutes or the index. You can replicate the fuction "in range" by ensuring min value is not too high.

  With regard to:

  Andrew Valko

  NOR Hungary

• Cannot move or leave the pointer to stop in a place using Microsoft Wireless Mobile Mouse 6000

  Original title:

  I can't find a way to get the mouse move or allow the pointer to stop in place so I can use the keyboard correctly.

  Hello

  1. what version of Windows is installed on the computer?

  2. what program are you using when the mouse starts to jump around?

  3 are you aware of any changes made to the computer, before the show?

  Assuming that you have installed on the Windows 7 computer, follow these steps.

  Method 1:

  Step 1: Safe Mode

  Start your computer in safe mode and check the number.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2: Clean boot

  If you are not facing the problem in safe mode, and then put your computer in a clean boot and search for the question.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: once you have determined the problem by using a clean boot procedure, follow step 7 in the article to restore your computer to normal startup.

  Method 2:

  Check out the following link.

  Troubleshoot a wireless mouse that does not correctly

  http://support.Microsoft.com/kb/321122

  See also,

  Change the settings of the mouse

  http://Windows.Microsoft.com/en-us/Windows7/change-mouse-settings

  I hope this helps.

• When I go to a web page, I can not select the button bar, tab or search on the page, type or select the place where I want to go? The pointer seems to be disabled for these functions.

  If Firefox blocks a page, I can't click on the allow button appears because the pointer of the mouse is disabled...

  Hello

  You should check with the Support of FireFox and their forums.

  Support for Firefox
  http://support.Mozilla.com/en-us/KB/

  Firefox - community and live Chat
  http://support.Mozilla.com/en-us/KB/ask

  Firefox - Forums
  http://support.Mozilla.com/en-us/questions

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Function editor does not support the pointer to the digital type

  Am I missing something or is it true that the CVI function Panel Editor does not support specifying a type parameter as a pointer of type number?

  I see no reason why he wouldn't or shouldn't.  It supports the pointer to char.  And it supports a table name (which, in C, is a pointer to the first element of the array).

  I guess I could use the array form as a pointer, but surely it's confusing when dealing with a simple pointer to a numeric scalar type.

  I am using the function Panel Editor only for the purpose of creating a dictionary of type so I can call functions DLL in VB.  Y at - he know somewhere how CVI types could are mapped to the VB types when you use the type dictionary?   for example, what happens if I use an unsigned int in a function parameter (VB does not support unsigned integers)?

  Menchar

  Hi Menchar,

  To create a pointer to an integer as a parameter to a function panel, you have two different options.

  First of all, all output parameters are defined as the default pointers.  So if you create an output parameter of type "int", he creates a ' int *' parameter.

  Second, if you want it to appear in the entry list, you can create a data type in CVI which will appear at the bottom of the list.  Data types to change your data types, go to the Options"(you must have a function Editor tab open and selected Panel to make this option available).  Enter the name of the type (in this case ' int * ') and click the Add button.  The new "int *" option should now appear at the bottom of the list.

  Third, you can use the array form (int []), but as you say, which can be confusing for other people looking at the code.  Or the other of the two first options are better choices.

  As for your second question, here's a link to a page MSDN showing types in Visual Basic and their representations .NET: http://msdn.microsoft.com/en-us/library/47zceaw7 (VS.80) .aspx.  This allows to make a comparison between VB and ANSI C data types.  For example, to ask on unsigned integers, and this site shows that Visual Basic has an Integer type (-2,147,483,648 through 2,147,483,64) and an unsigned return, UInteger (between 0 and 4 294 967 295).  From what I can tell, VB has signed versions of all its digital representations.  You can then take this with a list of ANSI C data types to convert between the two.  A list of ANSI C data types can be found here: http://www.exforsys.com/tutorials/c-language/c-programming-language-data-types.html

• How to keep the background to the point when shooting indoor basketball on a 18-135 mm t5i

  I'm new on this and so far I love my camera. However these shooting games is sometimes difficult.  How can I keep the background blur. Sometimes using autofocus, he catches someone has arms that more than the topic and I miss the shot. How to avoid that. Your help is appreciated.  Thank you

  When you look through the viewfinder, you will see 9 boxes arranged in a pattern.  These are the areas of focus.  When you use all the points the camera checks all the points and see if there is something that he can focus on at this time.  Then, he decides what is the topic and focus on that.  Sometimes it will jump back between something in the foreground and background.  But since the subject is usually at the forefront the camera will usually choose which background noise.  In your case, something happens in the foreground and the camera which is selected as the update since it is the closest.  Best way to remove is to be aware of all the AF points when shooting.  If things are too dynamic to keep all 9 free points from anyway, then move to a single point AF:

  If you want a specific choice of the update then change to read only the central point.  There should be a button in the upper right corner that allow this.  If you half press the shutter button, the camera will focus on what is at the center point.  You can then recompose (if you want) and take the picture.

• I lose the point of the mouse with a desktop in full screen with media center.

  I am running windows 7 64 bit. I have a graphics card 9800GT running a monitor and a LCD TV. I have the video installation of screens as extended desktop so that media center can run on the TV while I still have access to other functions of windows on the PC monitor. What happens is that when the library is running full screen on the TV I do not get a pointer on the other TV. When I close the Media Center or move it to full screen, the mouse pointer is still visible on both screens. It's really annoying. Does anyone know how to solve?

  I tried your suggestion and it did not work to retrieve the pointer of the mouse, BUT I don't have a partial solution. I bought a MCE remote and it allows me to control MCE well without the mouse. However, the downside is that I can't run other applications using the computer screen (the other view runs MCE) since I have no control of the mouse. Maybe you could help me out here. If I could remap a key on the remote control to switch in MCE mode while I run an app as I have everything that I need. Is there a key combination that will increase MCE from full screen to windowed mode?

  However, you must put in a bug report as I see quite a few others see mouse problems MCE running in mode full screen display.

• The scheme &lt; SOA &gt; _OPSS is already used for the safety of the point of sale. Please create a new scheme

  All,

  version: 12.1.3

  I am trying to create a new area where I wanted to use the same scheme used in the existing domain.  It failed with the below error

  com.oracle.cie.domain.security.external.ConfigSecurityException: oracle.security.opss.tools.lifecycle.LifecycleException: security of the store DB configuration error. Oracle.security.opss.tools.lifecycle.LifecycleException of exception: the SOA12C_OPSS schema is already used for the safety of the point of sale. Please create a new schema.

  Is it mandatory that the scheme (creating the UCR) used in a field cannot be used for the new domain?  or am I missing something? Please notify.

  Thank you

  Sen

  That's the point... So actually you were never more than one domain using the same patterns, you have never shared patterns on different fields... You had a domain which would sometimes... Not possible in 12 c but because of OPSS more... Maybe you could just the OPSS schema duplicated, but you would always use the platform so that it was not intended to...

• Replace with the point drag drop

  Hello

  I'm trying to find how to replace the base of the point drag is opposed to everything in the covering. I tried to use: Actions of the object - on accept: replace, but it does not work because the two are still visible and it looks bad!

  Have you tried with built-in States? 'Replace' you speak is supposed to allow the user to replace a drag by another source of drag source when it was already slipped to a drop target. The first drag source would return to the original location. This isn't what you want to do. I tried to explain these States included in this article:

  & Slipped in 2016 with Captivate 9 - Captivate blog

• What is the importance of the point size of track?

  I'm doing the follow-up of the camera. I have two very similar scenes and in one of them the track points are much smaller.

  I assumed it was supposed to represent the distance from the camera, but now I'm not sure.

  You are right. If the point of the track sizes (and relative triangulation targets) seem to fill the screen enough 'also' without a lot of overlap and without being absolutely tiny, it means you've got a good track and that the camera will be placed well enough in terms of focal length. When the track points are tiny or almost impossible to see, your camera will be placed ELSEWHERE far from there and you will probably end upward with a lot of focal distortion in your scene resulting. It is really no great way to get the AE to give you optimal results other than choosing the right type of camera movement and begins with images of good quality with a lot of visible depth and a good amount of movement. You can try to delete points to 'improve' on a track, but rarely have I found this method to produce better tracks. If you do a lot of follow-up camera, I strongly suggest you script "World Transform", which corrects many of the investments of a track weird camera. It allows you to 'fit' your entire scene, so if your track give a camera to Y =-20 000, you can scale the computer down by any percentage you need to get him back in a reasonable range of 1 000 to 2 000. It will make all the necessary corrections to ensure that your device is not set to zoom 15 000 pixels as well.  You can also offset your comp so that your null values or the fire is properly centered and easy to work in different orthogonal views. I find it a valuable tool when you use the tracker to the camera.

  Please note: once you use World Transform to correct your scene, you are no longer able to go back and set null values or the lights of your track of original film, since the positional link has been altered, so keep that in mind.

• What is the significance of the points/status in the forum

  I've worked with oracle since 1992, and yet I still have no idea how the thing of points in for a job. (Obviously it has not seemed to be of great importance or I would have asked this question early :-)  But ok, for what reason if points are awarded? I noticed that the forum now has a list of "participants" in the order of 'status' which seems to be random and not in the order of points or how much bling they have on their icon. The champion of the oppressed, said "good". So where people cash in their points? Just curious.

  From there:

  https://wikis.Oracle.com/display/Forums/Forums+FAQ

  What are the "reward points"?

  It is possible for you to reward an answering machine for a 'helpful' answer 5 points or 10 points for 'proper' (or not at all). Users who accumulate in certain amounts of points reached different levels of recognition (see legend). In this way, users who are always useful or appropriate answers raise their position in the community. (Note: in order to assign the points, you must identify your message as a "question" first, which is defined as the default value.)

  So where people cash in their points? Just curious.

  I'm also not sure right now. I threw myself by the last bar where I tried to pay with some of my points, and the coffee dispenser also constantly of my offer still ignores all my points for a small cup.

  Seriously, they are more valuable. With X points you get an another badge right display to your handle, and also if you are in the top X of a forum you are displayed in the list of participants top of page (very similar as with the message previously counter) forum. Others so that they do not have a lot of value.

  see you soon

• Restore to the point of backup with select for update

  I have I problem with my application I will try to post a simple test to demonstrate.
  The problem is that after rollack to backup session does not release lock if there is a sleep between.
  
  Here's a simple test case.

  create table t1 (a number);
  
  insert into t1 (a) values (1);
  
  commit;
  
  create or replace procedure xx_test_1 is
     dummy           number (1);
  begin
     savepoint mysavepoint1;
  
         select 0
           into dummy
           from t1
          where a = 1
     for update nowait;
  
     DBMS_LOCK.sleep (seconds => 10);
  
     rollback to mysavepoint1;
  end xx_test_1;
  
  create or replace procedure xx_test_2 is
  begin
     update t1
        set a = 2
      where a = 1;
  end;
  /

  In session 1 execute proc1.
  Session1 > exec xx_test_1;
  
  In session 2 perform procedure while the session 1 is "dormant".
  SESSION2 > exec xx_test_2;
  
  After some finite time of session and must release the lock on the record.
  But session 2 guard blocked by session 1.
  
  help apreciated.
  Thank you
  Miguel

  I don't think it's because you have a call to DBMS_LOCK. SLEEP. I think it's just a coincidence because it allows for enough time for you to launch a call for another session. Here's the relevant part of the SQL reference manual:

  Releases all table locks and line acquired from the point of backup. Other operations that have requested access to the lines locked once the save point must continue to wait until the transaction is committed or rolled back. Other operations who have not already requested the lines can request and immediately access lines.

  Source: ROLLBACK

• Dynamic action to set the value of the point of Application

  Hello
  I want to display a form button that sets a value of the point of Application. Can someone please help and guide how to proceed?
  
  The requirement is, the user will receive a report, they can change a record and a button will allow him to SET the record for the session. When it accesses a different page within the application, they will see that the data relevant to the record that is DEFINED.
  
  Thanks in advance
  Aali

  Hi, Estelle,.

  You can use the dynamic action 'Code from PL/SQL Execute' to fix your application. For example, your code might look like

  begin
      :G_DISPLAY_MODE := :P1_DISPLAY_MODE;
  end;
  

  Page items to submit: P1_DISPLAY_MODE

  P1_DISPLAY_MODE would be the element on your current page where you select the desired value.

  Hope that you give something to play with.

  Concerning
  Patrick
  -----------
  My Blog: http://www.inside-oracle-apex.com
  APEX Plug-Ins: http://apex.oracle.com/plugins
  Twitter: http://www.twitter.com/patrickwolf