The paths not supported even mean?

Similar Questions

• connected as long as User1 I can only access the srv record (Explorer) - execute / run as he is denied (the path not found or insufficient rights)

  Original title: denied enforcement program

  Configuration:
  -Win server 2003 standard (in the Working Group)
  -Portable Acer Aspire 5100, Windowx XP Home Edition sp3

  Problem:
  On laptop, there are 3 users: administrator (administrators), (power user) User1 and User2 (user).
  Logged on as administrator or User2 I can access the server disk, run the executable SRV drive etc, but connected as
  User1, I can only access the srv record (Explorer) - execute / run as it is denied (the path not found or)
  insufficient rights). The same phenomenon occurs even if User1 receives administrator rights.
  On the server side there is no restriction or limitation to User1 (because it's in the group, where
  any member of this group (also User2) has no problem). Logging as User1 on others
  PC there is no problem.
  Grateful for any suggestions / help.
  Marjan

  Hello

  Try to take possession of the file or program and check.

• How to change the resolution of the screen when the "input not supported" message after reboot

  I need to change the display resolution to 1600 x 1024 after I changed my 1900 x 1200.
  the problem is,
  the "input not supported" message when I reboot the PC and does not allow me to do anything.
  He presents himself before the logon prompt.
  I restarted to fail safe with the command line with the id of the administrator and was able to change the resolution, but
  He returns to the State ("input not supported" and no prompt connection) after I restart the PC

  Mark,
  Thank you for your help,
  I tried in vain,
  I just used another monitor with a higher resolution, restore the previous resolution and swap the monitor again.

  Kind regards

  Claudio.

• When I use the Client for NFS provided by Windows 7, I'm unable to connect. The "mount \\ip address\share Z:" command fails with the error code "the path not found network".

  Identification of customer's Windows 7 NFS UID GID information

  I am trying to connect to the Windows 7 Client NFS on a server running on a computer (VxWorks) NFS.  I am able to properly connect Client NFS software by a 3rd party on the NFS server.  However, when I use the Client for NFS provided by Windows 7, I am unable to connect.  The \\ip address\share Z: mount"command fails with the error code"the path not found network ".  I can't do a ping of the computer running the NFS server.

  The NFS Client operating system: Windows 7 Ultimate, 64-bit

  Data captured by Wireshark

  MOUNT V1 EXPORT call 3rd party client
  Identification information Flavor: AUTH_UNIX (1)
  Length: 32
  Stamp: 0xc7065970

  Machine name: PC
  UID: 1000
  GID: 1000

  MOUNT V1 EXPORT appeal of the NFS client
  Identification information Flavor: AUTH_NULL (0)
  Length: 0

  It seems that the credentials of NFS Client are not correct.  How can I change the flavor of AUTH_UNIX and the UID and GID to 1000?

  Hello VDAEMP,

  As Eddie and Sudarshan has said, the Microsoft Answers community focuses on issues and problems related to the consumer environment. Please join the public IT pro TechNet forums below:
  TechNet - Windows Server
   
  Thank you

• Cannot run most of the apps and regedit by all means indicated by the path not specified not

  Original title: need help ASAP

  I can't run most applications and by all means regedit it says path not specified

  I tried to do some tinkering with regedit and install an application on another drive instead of C and ended up having failed, but kept a copy of the original registry values.

  set these registry values back and restarted after the problem I

  Hello

  See the second Option in the last link I posted in my last answer (and below here):

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  --------------------------------------------------------------------

  If you need to repair disks - these help repair Windows not re-install.
  Often, these records will help when the OEM recovery disk does not work.

  Download Windows 7 system recovery discs - charge now $9.75 for ISO
  images to make the discs. (It can be done on any computer running XP,
  Vista or Windows 7 which has a CD/DVD burner).
  http://NeoSmart.net/blog/2009/Windows-7-system-repair-discs/

  How create a Windows 7 system - free repair disc (must be made on a
  Windows 7 computer running the same 32-bit or 64-bit).
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  
  An installation disc is possible also to use for repair. Of course you would
  Use your own COST (product key).

  How to: What are my options for Windows 7 reinstall media?
  http://answers.Microsoft.com/en-us/Windows/wiki/Windows_7-system/how-to-what-are-my-options-for-obtaining-Windows-7/528163c1-0b2e-4AD2-a26d-7112851d1dc2

  Welcome to the recovery of Microsoft software
  http://www.Microsoft.com/en-us/software-recovery

  See MVP Andre Da Costa message in this thread.
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/how-can-i-download-gatewaywindows7recovery-disc/3c0ecd74-CFC1-4188-89c7-a6bbe8113ee1

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• Impossible to install Illustrator - operating system not supported even if it is on the list

  When I try to install Illustrator it says that I can not download it because Illustrator does not work on my operating system and verify the system requirements.

  I'm on Mac OS X 10.6.8 located on the list of supported operating systems. I updated the software and I restarted, without success. I also managed to install and run the trial version for a month without any problem.

  Help please!

  What version of Illustrator? If it's CC, then you need Adobe Application Manager, also called creative cloud. All of the CC downloads arrive via this application.

  Otherwise, there's always: http://helpx.adobe.com/contact.html

• HP Probook 440 2 How to change the BIOS to work around the memory not supported the start-up message

  Hi everyone, first I would like to say that I find the list of operating system for the less "interesting".

  Now, I bought a G2 to replace my 4441S.

  The problem is that the momory I had gave me a message as "memory not supported."

  very well, I bought new memory, same problem with 2 brands, so I it's maybe because I bought 'normal' memory and not DDR3l?

  The thing is that I need this memory quickly and I can't find DDR3L, now I use corsair Vengeance and I need more on the lan function but this message that allow me to use the computer if I press on enter, have no countdown with option by default and no BIOS settings so I want to change that and either add a timeout that starts the laptop or just disable this message , because it works, I use it now.

  I need that until I can find the DDR3L.

  Thank you.

  You don't seem to understand how it works with primary and secondary memory voltage settings schedule and bus. the laptop BIOS ROM file includes settings in its encoding of the memory modules that meet the compatibility requirements. If you install memory that has not been tested for compatibility, so it will not work or even it seems to work, it will be unstable.

  A BIOS of the laptop is quite unlike a BIOS that is present in a motherboard level amateur games. There are no timings adjustable and tensions to the timings of the memory or bus in a laptop BIOS BIOS standard voltages. It actually is to protect the owners from themselves.  You "do not 1.5 and 1.35. You can't change the setting of the voltage on the bus to do anything other than what is defined in the BIOS. If you install the module memory does not accept the voltage set by the BIOS code, then you are simply out of luck.

  Check out the BIOS Modding forums if you want to see what options may be made available.

• Presario CQ5320F: upgrade the processor 'not supported CPU.

  I was looking to upgrade the CPU on my Presario CQ5320F, for most popular processors in the list on the HP site for my computer. So I bought one, actually two, of the AMD Phenom II X 4 processors (Deneb). When I installed it, them, I get a message saying that the CPU is not supported. I don't know how I got it done, but it does not work. I bought two of the processors by mistake. The code on the processors that I bought is "HDZ955FBK4DGM", which seems to be the processor in the list of compatible processors on the HP website.

  -AMD Phenom II X 4 9xx/9xxe/8xx Quad-Core (Deneb)

  -AMD Phenom II X 3 Triple-Core (Heka) 7xx/7xxe

  -AMD Phenom II X 2 5xx (Callisto)

  -II AMD Athlon X 4 6xx/6xxe (undactylopodite)

  -AMD Athlon II X 3 4xx/4xxe (Rana)

  -AMD Athlon II X 2 2xx/2xxe (Regor)

  -AMD Sempron 1xx (Sargas)

  I'd appreciate any help.

  Thanks in advance,

  nashville_bill

  Thank you for giving me the answer. I guess it's time to look for a new motherboard now.

  No doubt, it would be nice if someone let HP know this, so people like me would not try to use this processor with the motherboard.

• Several State sites that my browser is not supported, even if I have version 3.6.3

  Mozilla/5.0 (Windows; U; Windows NT 6.0; en-US; RV:1.8.1.7; .NET CLR 2.0.50727) Gecko/20070914 Firefox/2.0.0.7

  I tried to reset: general.useragent.extra.firefox; Firefox/3.6.3 but "reset" is gray. Help, please. I updated FF once again, in the hope he could solve the problem, but the most up-to-date FF is, the more websites "" warn me to be outdated browser or not supported! Thanks much for any help!

  URL of affected sites

  http://www.docs.google.com, youtube.com, firefox add-ons

  It is preferred that you probably need to reset general.useragent.override, since its your useragent together and not only the part of Firefox, which is wrong.

  • Type of topic: config in the URL bar and press ENTER.
  • If you see a warning, you can confirm that you want to move forward.
  • Filter = general.useragent.
  • Preferences that are bold, one line at a time, right-click and select Reset.
  • Then restart Firefox

  Check out the Web sites or modules incorrectly report incompatible browser and find what version of Firefox you are using

• Monitor displays the frequency not supported

  work PC is windows 7 Enterprise

  I have a problem with the refresh before logon rate-

  I put my refresh at 60 hz, and once connected, everything is good)

  (I have several PC and use a KVM, the works of PC windows 7 very well once I'm connected, but sometimes the login screen reads the kvm evil and tries to go to a faster refresh.) Monitor says frequency not supported.)

  Where should I go to manually set the display at 60 hz for use before being connected.

  Hello

  Thanks for posting your question on the Microsoft community.

  Thank you for details on the issue.

  I suggest you to refer to this article and check if it helps.

  Reference:

  Flicker of the correct monitor (refresh rate)
  http://Windows.Microsoft.com/en-us/Windows/correct-monitor-flicker-refresh-rate#1TC=Windows-7

  If this does not help, you can ask your question on the TechNet forums to get help.

  TechNet Forum
  https://social.technet.Microsoft.com/forums/en-us/home?category=w7itpro

  I hope this information helps.

  Thank you

• Why brushes that I create with the application not supported by Photoshop? -Is this not the point of the whole of the cloud?

  I have created custom brushes that I need to use for a project and features works of great brush. However, these brushes are unusable in Photoshop.

  Wwhy is a brush under construction engine in an application that is not supported in your cloud applications? It makes no sense at all.

  HI Dave,.

  This is probably how the brush has been registered. History:

  None of the Adobe tools use the same rendering template, each has its own format of brush and the brush characteristic, so not every brush works in all applications.

  In other words, you cannot use brush in Illustrator into Photoshop or sketch, or a drawing brush in Photoshop or Illustrator. Photoshop rendering template just can't manage that made the sketch, it works in a very different way. That's why when you create a brush brush, you must choose which tool you will target. If you are ultimate goal is to use the brushes in Ps rather than in the skit, then you need to limit yourself to the brushes Ps targeted when you get to the Style section (look for the Ps icon in the upper left section, after the Sketch in Photoshop brushes).

  When you save a brush, you are redirected to a screen (see photo) where it can be edited/named. This is also where you can see which brush to work with each application. The first three are sketches of Photoshop. If you scroll down you will see the brushes for PS and AI. When you save, except for the application in which you will use it. Let me know if that clears things up for you.

  Try this with one of your brushes:

  Go to your library and choose a brush

  Tap the change (square with a pen). This will open a Visual list of brushes

  If you want to use a sketch brush, choose one of these brushes (tap the circle to check), name it and save it. It will save in your library as a brush drawing, and as soon as it syncs you should be able to open in the skit. Once on the sketch, now a pressure on the fifth brush in the toolbar and your library of brushes should be there. The same process works for brushes for Photoshop and Illustrator CC.

  Let me how things are going.

  Sue.

  

• You are using Safari on the mode not supported on the iPad with R17

  I have a customer who just bought for their sales of the iPad, and they try to use the 'Safari' or 'private' in a mode not supported. They have transformed the center of messages, but when they try and login after clicking on the message of no browser supported that they receive the following error message:
  
  Occam, update browser Servlet: Eception exception: and eception exception occurred while trying to render the page. Please try again later or contact customer service for more information.
  
  I know we have customers and sales advisers internal with CRM OD working on the iPad with the message off the power Center. Did anyone see this error when you are trying to connect with the iPad or the iPhone?
  
  Thanks for your help!

  Support of CRM On Demand using Safari on the iPad will be available in R19.

• BlackBerry Smartphones device they meet the requirements to download app but yet not supported (even free)

  Hello world! I m new to the forum...

  I have a

  BlackBerry 9700 (3 G, WiFi)
  V5.0.0.862 (package 1446, Plataforma 5.1.0.175)
  App World 2.0.1.12

  Carrier: Telecom Personal (Argentina)

  I was ve download and install free and paid apps with no problem, but today it is impossible to download anything from the PC or Smartphone.

  While I was looking at the download button and the buy button if necessary,

  and requirements where ok

  Supported devices
  This element supports all devices
  Required device software
  4.2.1 or higher
  Supported countries
  All countries
  Supported carriers
  All carriers

  
  

  but once I don't connect no more...

  My carrier doesn't have answers for these problems...

  I m still not able to use the web application (web appworld) to download and install the free or paid apps, but now I can do it through my phone and a paypal account

  So it's something...

  Thank you very much Xandrex!

  Concerning

  Gone

• While making a stop to a vista computer remotely, an error "the path not found network" takes place.

  I'm stopping distance this computer running Windows Vista Homp Premium from a Windows XP Professional computer. I ran shutdown.exe, but it says "the network path is not found." The network is working properly and I can't do a ping to this computer. I made sure that I ran the closure of an administrator account that has the same cridentials as an administrator on vista computer account (when I changed it, I got "access denied"). Quite simply, I know I have the privileges necessary to perform a remote shutdown.

  I found the solution. He has been to change the LocalAccountsTokenFilterPolicy by following the instructions here: http://support.microsoft.com/kb/942817

• Why is the Admiral of Motorola, who meets the conditions, not supported?

  Unless I'm mistaken, it has a resolution of 640 x 480, Qualcomm Snapdragon S2 MSM8655/1.2 GHz Scorpion which I believe uses ARMv7, Android OS v2.3.5, and 512 MB of RAM which seem to meet the listed requirements. Still listed as not compatible in the play therefore store it requires installation of the apk manually if you want to use. Have not had any problems with it and am looking into the causes of incompatibility.

  This tracking bug may be related?

  Bug 810971 - peripheral on Google marked as incompatible game despite recently supported - smallScreens manifest statement change?