The PC stuck at 37% recovery

Similar Questions

• Satellite C660-15r stucks and without recovery possible

  Hello

  I hope someone can help me or who knows what to do. I have the Satellite C660-15r it been shut down correctly, but when put back come with start windows normally, as if it was interrupted, I clicked ok for that but instead of loading, let's make some kind of recovery only he was not able to complete this and rather said there is nothing to recover.

  It is stuck at it and will go no further, says administration system to log in however its not allowing to connect or to do anything about this or off farm then restart, I tried factory reset, but it will not work at all I've tried several attempts with 0 and other options, told me it does not work , but I can get up f2 and f8 loading up all that works well but I find no option to factory reset. It gives me options to recover, but they take the same screen with no improvement and safe mode does not work.

  I hope someone can help me I will be very grateful.

  Thank you in advance.

  Shell :)

  At first, I must say that recovery option is available if the laptop to factory settings. After reading your ad I n don't know if you still use OS install of origin that you got with your laptop or maybe the OS preinstalled on your own.

  I assume that you did not create a media recovery (DVD) use pre-installed Toshiba recovery media creator, right?
  In the use of your disk recovery situation could be simpler to solve this problem and install original recovery image.

  Can you please post model mobile exact?

• HP Envy 15-j139TX: the BIOS using external storage recovery does not work.

  My HP Envy 15-j139TX got stuck (frozen) and I force closure by long pressing the power button. I tried to start by pressing the power button, it shows a black screen (display off) and the capslock continues to Flash.

  I did research on the problem and discovered that the issue was "the BIOS corruption failure" according to the information on the link below:

  http://support.HP.com/us-en/document/c01732674/

  I tried to recover the BIOS using an external storage device by following the instructions at the link below:

  http://support.HP.com/us-en/document/c02693833

  But it did not work. The lights keep flashing. I have my files b.SC. thesis on the computer and their need for pronto. (If not my life is pretty well made)

  I also couldn't find the files for version 10 of Windows (64-bit) to my laptop, so I tried with one I downloaded from another site and I got a BIOS of Windows 8.1 HP site.

  Is there anyway I can fix it soon or get my files as soon as possible. Help, please!

  Have you ever updated the BIOS before?

  If you have, you should be able to recover the BIOS using the Windows key + key B method.

  All holding the key Windows + B button down, press the power button and wait to see if the laptop responds with a message of recovery of the BIOS on screen.

  As my wife continued his mastery, I insisted on his recording of his files periodically to our home network NAS.

  You can remove the hard drive and connect it to a desktop computer to get the files from it. You can connect the hard drive to a USB to sata cable to connect it to a laptop.   Instructions to access the disk by opening the back door are on page 42 of the maintenance and service guide. The hard drive is part replaceable by the user, so you don't have to worry about voiding the warranty.

  http://h10032.www1.HP.com/CTG/manual/c03943414

  Your notebook is new enough to have the recovery key enter BIOS update available. Use the F.65 version in the Windows 8.1 driver download section. the softpaq is at the following ADDRESS.

  http://ftp.HP.com/pub/SoftPaq/sp69501-70000/sp69886.exe

  You will need at least 256 MB usb key to create a USB rcovery to recover the BIOS with. BIOS update softpaq will offer the opportunity of creating a recovery USB. I used the method on multiple occasions and it worked for me.

• Why are the files "stuck" on the treatment of file?

  I downloaded two television shows that show the entire file is downloaded [i.e. 1.40 1.40 GB GB]. They each have the statement "processing file" and blocked at this point for days.  I tried to stop the process.  Each episode is then listed for download again.  I begin a new download, and the results are always the same - stuck to the processing of the file.

  Does anyone know how to complete the treatment, so the episode joined his brothers and sisters?

  TNX

  Mark

  You can try to use edition > Preferences > advanced > reset the Cache and also delete the contents of the download folder that you find in the iTunes Media folder. Temporarily disable all antivirus software and try again. Any change?

  TT2

• I can't do on the Satellite L505-GS5035 Toshiba Recovery

  Hello

  My L505 (GS5035) came with win 7 home recovery in a will get 10 GB partition is invisible in windows / my computer this version of windows by fault/recovery work properly... and I got it 2 times with the F8 Toshiba Recovery Wizard
  But I decided to set up win 7 ultimate CD... but I didn't like it
  So I now want to implement recovery House original win 7 with all the software Toshiba using F8 is not useful, because after installing win 7 ultimate CD... F8 does not show the Toshiba Recovery Wizard in the list.

  The recovery partition [10 GB] is not damaged or formatted or empty
  (when I insert any what CD windows it shows me all the hard drive partitions/spaces and I see the State of the recovery partition = 10 GB with free only 600 MB of space)

  But I can't open the recovery partition of my computer and F8 is not useful now... After installing the CD of win 7 ultimate... F8 does not show the Toshiba Recovery Wizard in the list.
  What should I do to re install the original win 7 home / with toshiba software?

  > But I decided to set up win 7 ultimate CD... but I didn't like it
  > So I now want to implement recovery House original win 7 with all toshiba using F8 software is not
  > useful because after installing win 7 ultimate CD... F8 does not show the Toshiba Recovery Wizard in the list.

  The point is that you have installed a clean Windows 7 on this laptop and the new OS has damaged or replaced the Toshiba Boot Manager where the recovery disc option have been mentioned.
  Now, you can grab the laptop using HARD drive recovery. In this case, you must take the recovery disk you created if all goes well

  If you didn t create disk recovery, then you will need to order for a small fee.

  https://backupmedia.Toshiba.EU/landing.aspx

  welcome them

• Re: How to recover the Equium A210 - is not recovery disc

  How can I do to make a recovery for my A210 (PSAFJE-003003KS) disc, according to pc world it should came with a disc, but it didn t, and although there is a hard disk I would like to have a physical that my laptop is upward lately.

  Hello

  I think that your laptop supports HARD drive recovery!
  Therefore, it should be possible to perform the recovery procedure, without the use of the Toshiba Recovery disk.

  Just press the F8 key immediately after the laptop has been turned on.
  Then choose fix my computer-> new window should open.
  There, you have to choose the last option called Toshiba Recovery and follow the instructions on the screen.

  Please note that this procedure will fix the laptop back to the factory settings and format the entire HARD drive!

  Concerning

• My wife has an i5 to 2.3 GHz MacBook Pro early 2011 and it worked like a slug.  Ran disk utility and verified that the disk needs repair using recovery HD.  What does this lead and what is the risk of losing all the data is there?

  My wife has an i5 to 2.3 GHz MacBook Pro early 2011 and it worked like a slug.  Ran disk utility and verified that the disk needs repair using recovery HD.  What does this lead and what is the risk of losing all the data is there?

  Even if it is very slow, you must make a return upwards before the race "repair disk". The risk of data loss is minimal, but do it anyway: Save and run to repair the disk.

  As for what it implies - most of the time nothing more than simply sitting and waiting to do his thing.

• Re: Can I use the other Satellite U400 series recovery disk

  I have Toshiba Satellite U400 121. My recovery disk does not work may be due the scratches that I see in it. I took the laptop to the Toshiba Center service and I got a negative support of them. They said, they can't put the Windows Vista because the recovery disk is not there, and they have put Windows XP inside and handed to me.
  later I got to know that Windows Xp is not Geninue one. :|

  I can still see one of the Partition 'D:' with folder HDDRecovery inside.

  So can I use Recovery Disk of all PC model Toshiba laptop other than the Toshiba Satellite U400 121 recovery disk.

  In fact, I tried with the other model recovery disk, that at boot with this disk, Recovery Wizard starts up, but since I'm not sure about this one I stopped there and brought out.

  Please one of you let me know if you have valuable contributions on this.

  suggestions are welcome!

  Thanks in advance.
  wassim :)

  Post edited by: Mikael

  Hello

  I don't know Mr. which series Satellite U400-121, it is, but you must use the recovery disc designed specifically for this series of laptop!

  Another recovery disc cannot be used because the drivers and tools that have been implemented in the image of Toshiba are not designed for this series of laptop!

  By the way; You can order the CD from recovery from here:
  https://backupmedia.Toshiba.EU/landing.aspx

  Good bye

• What is the recommended for El Capitan recovery process?

  What is the recommended for El Capitan recovery process?

  I just upgraded directly from Mountain Lion, and I see that my recovery disc has disappeared.  My recovery disk wizard is only good for Lion and Mountain Lion.  I searched Apple.com and found a complicated process by which I could use the Console and create a bootdisk with the option reinstall, but I can't believe that this is the recommended option for a common user?

  So is time machine bygones?  I noticed that it is dimmed in the Menu bar?

  Certainly, you can restore El Capitan as you would with any other version of OS X - using the HD Recovery. I have no idea why your Recovery HD disappeared. Usually this would cause by user error. However, you can create a standalone install OS X on a USB FlashDrive for emergency use. This has been an option because at least Mavericks:

  Do your own installation of El Capitan using the El Capitan tool flash drive:

  You can create an installer of flash of El Capitan via the Terminal drive. El Capitan has its own manufacturer Installer integrated that you use via the Terminal:

  You'll need a freshly partitioned and formatted at least 8GBs. USB flash drive leave the name of the flash drive on the system by default, "Untitled." Do not change this name. Wait as the full process that will take some time.

  Open the Terminal in the Utilities folder. Copy and paste the following line in its entirety in the Terminal window.

  sudo/Applications/Install\ OS\ El\ Capitan.app/Contents/Resources/createinstallmedia--volume/Volumes/Untitled--applicationpath X\ "/ Applications/install OS X El Capitan.app.

  Press RETURN, enter the admin password (will not resonate to the window) then press RETURN again.

  You must have setup in your Applications folder or change the paths in the command line above.

  You can do the same thing for Yosemite by making the appropriate substitute for the installer in the above command line:

  Make your own Yosemite flash Installer drive using the tool of Yosemite:

  You can create an installer of the Yosemite via the Terminal flash drive. Yosemite has its own manufacturer Installer integrated that you use via the Terminal:

  You'll need a freshly partitioned and formatted at least 8GBs. USB flash drive leave the name of the flash drive on the system by default, "Untitled." Do not change this name. Wait as the full process that will take some time.

  Open the Terminal in the Utilities folder. Copy and paste the following line in its entirety in the Terminal window.

  sudo/Applications/Install\ OS\ Yosemite.app/Contents/Resources/createinstallmedia--volume/Volumes/Untitled--applicationpath/Applications/Install\ OS\ Yosemite.app X\ X\

  Press RETURN, enter the admin password (will not resonate to the window) then press RETURN again.

  You must have setup in your Applications folder or change the paths in the command line above.

  In addition, to Yosemite and earlier you can try using DiskMaker X.

• When you try to run the system on gateway mx6453 recovery, recovery begins a box opens indicating the system restore is incomplete, please insert the cd or dvd

  try to run the system on gateway mx6453 recovery, opens the recovery page, but then appears a box that says system restore is incomplete, please insert the cd or dvd.  the recovery partition seems to agree.

  Hello

  · Why are you running the system recovery?

  · Are you able to perform system restore on the computer?

  I suggest contacting the manufacturer of the computer, the link you can check: http://support.gateway.com/support/default.aspx?cmpid=topnav_support

  For reference: Troubleshooting for problems when you try to use the System Restore tool in Windows XP: http://support.microsoft.com/kb/302796

• My computer windows vista laptop says that it is not enabled. When I try to 'reactivate' using the code stuck to the computer, it fails. What can I do?

  So, to my office, I have a laptop HP under Vista Home Premium x 86.  All of a sudden he says he is not enabled.  All my attempts to activate it using the code stuck on the PC itself did not work.  I need to get this computer to work properly, and I can't risk having a problem with him on the road.  My attempts to contact HP only ending with them telling me that they could remote virus scan and it would cost me over $ 100.

  I also bought a vista "anytime upgrade" and it won't let me even upgrade the system without the activation code.
  Help!

  How to activate Windows 7 or Vista manually (activate by phone)
  http://support.Microsoft.com/kb/950929/en-us

  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) explain your problem clearly to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  Activation and registration of a Microsoft product
  http://support.Microsoft.com/?kbid=326851
  Windows activation: (888) 571-2048
  (888) 725-1047 or 800-936-5700

  -Product key of letters and numbers-

  Not confused the letter B with the number 8, the letter Q with the letter O.
  the letter G and the number 6.

  A, E, I, O and u are not used.

  ----------------------------  Alternatives -------------------------------------

  To enable the use of the phone

  1. open Activation of Windows by clicking on the Start button, right click on computer, clicking Properties.
  then by clicking on activate Windows now. ?

  2. click on show me other ways to activate.

  3 type your Windows 7 product key, and then click Next.

  4. click on use the automated telephone and then click Next.
  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  5. click on the location nearest you from the drop-down list, and then click Next.

  6. call one of the available phone numbers listed. An automated system will guide you through the activation process.

  7. When prompted, enter the installation ID that is listed on your screen in your phone keypad.

  8 Note the confirmation ID the phone system gives you.

  9. under the terms of step 3, type the confirmation ID in the space provided, click Next, and then follow the instructions.

  10. If the activation is not successful, stay on the line to be transferred to a product activation agent who can help you.

  How to contact a Microsoft Product Activation Center by phone
  http://support.Microsoft.com/kb/950929

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Learn about Activation:
  http://TechNet.Microsoft.com/en-us/library/ff793423.aspx

  J W Stuart: http://www.pagestart.com

• Error message "the computer restarted unexpectedly or encountered an unexpected error" after starting the system on Windows 7 Recovery.

  While trying to reinstall Windows 7 on my Dell Inspiron 1545 of the reinstall DVD after you have installed a hard drive again, I got this message: error message "the computer restarted unexpectedly or encountered an unexpected error" after starting the system on Windows 7 Recovery. Tried F10, SHIFT F10 and nothing happened. Then I tried a suggestion of virtual Agent to press F8 to get to advance Boot Options, but this option does not appear! Help!

  For Dell cptrs, you will need to press F12 to access the unique Boot Order Menu(= a temporary setting), little after the Dell logo appears on the desktop. U hv only 5 seconds to do, b4 the cptr will automatically initialize to top with the internal HARD disk.

  ....... F12 is usually used to start the cptr since the DVD player or a plugged in USB-flash drive with a Win 7 install or recovery media.

  To permanently change the boot order, you must similarly press F2 to access the full Boot configuration Menu. The default boot device is the internal HARD drive, but this can be changed to DVD player, USB, disk, network drive, etc. F2 is usually used to start the cptr of an external hard drive(= USB HDD) that contains a bootable Linux operating system.

• where can I find the windows of the installation files on the hard disk of a machine that has the pre installed software and recovery software?

  where the windows installation files are stored on a disk hard if the software is preinstalled. My systrm broke down and will not restart, want to re window installation but do not have a disc, samsung refuse to number one, all I want to do is to reinstall windows 7. to access the command propt and can launch the 1st screen of the windows setup, but when it gets to step 2 his request that the drivers can be installed. any idea?

  If victory has been pre-installed by Samsung how to recover as long as the plant is a Samsung process, usually through the hidden restore partition.

  There is nothing on the drive on which the end user can use to reinstall other through instructions Samsung.

  On some PCs from Samsung, you press F10 as the PC starts to access recovery.

  Be aware that if the player does not, you will not be able to recover.

  Only Samsung can provide the recovery disks, or the means of recovery in the factory.

  Although there is an ISO official win7 download to create the installation win7 dvd for use with your Win Key.

  If you use this method about the utility Samsung provided will be installed and you will need to visit their drivers Samsung support

• 8024402C in the window update 8 error recovery and cant open in apps store...

  8024402C in the window update 8 error recovery and cant open in apps store...

  I got this error for 2 months, even after trying thousands of methods... including registry too
  then I realized that the problem is in my cuz IPS (Internet Service Provider), it could not find the server
  configure your own server-to-server of google
  for example, 8.8.8.8

  go to RUN
  Enter "ncpa.cpl".

  Right-click on the network you use for internet
  Go to the properties
  do not click on setting ipv4
  again go in properties
  Click "use the following DNS server addresses.
  Enter the preferred DNS server

  8.8.8.8

  than others

  8.8.4.4

  YOU'RE DONE!

• Install W xp on the drive from another computer recovery CD?

  Thanks to the help I received here W xp runs on the drive by using the Windows XP Mode :-)

  I wonder however if W xp might also have been installed on the VMware Player (or workstation) in the file 60GT290E. ACR on the W xp CD from recovery of one of my previous computers, Acer TM 290 E? This W xp installation would now be obiously on a different, more recent computer. For your information: in addition to the mentioned the same file recovery CD also contains some sort of "general" folder that contains:

  
  

  ; Windows XP Home Edition preloads for Acer TM290E series
  ; German Version 6.0.0
  ;
  ; RCD P/N: XX. T290E.60G
  ;
  [Hand]
  OS = Windows XP Home Edition
  Model = TM290E
  Lang = German
  Version = 6.0.0
  PN = XX. T290E.60G

  It is an OEM specific production disk, and can be installed only on the product, with that he came!