the pointer to int as a parameter in the dll, but the value of parameter variation doesnot

Similar Questions

• CVI 2013 SP1 - function calls repeated with pointer on a variable array parameter causes a shift of the index

  I have some functions will be pointers as parameter and CVI 2012 SP1, they work as before without problems but with CVI 2013 SP1 they are now incorrect.

  Here the description of what is happening - I found a cure, but a duty adopt the old code and I think it's clear that nobody don't "captures" all lines in a 'big old code' which are affected (maybe):

  I have functions

  'function_XYZ(int *p_paraArr) '.

  with 'p_paraArr' as pointers on a table (int).

  Suppose I have another function

  "fct_TOP (void)".

  where is a local array variable which is inizialized by

  "int TheArray [25] = {0};

  and inside of this "TOP"-function-body I call a function ".

  "function_XYZ (TheArray).

  There are no complains of the compiler (CVI 2012 or 2013) and the code works (but the CVI 2013 only once!).

  But if I put 'fct_TOP' loop I have a lag in the "TheArray' -memory.  (The loop surrounds the function "TOP"! "")

  This means that the result "TheArray" obtained from "function_XYZ (TheArray)" starts at index '1' not on the index '0' - as the first time that the function "function_XYZ (TheArray)" was performed. ".

  The solution is:

  I only replaced

  "function_XYZ (TheArray)" (<1>)

  by

  "function_XYZ (&(TheArray[0]))" (<2>)

  overall the program now works every time (in the whole loop)-the first time (in the loop).

  In the second version (<2>) everything is necessary to "work well":

  The '&' and parentheses "(...)", which contains the element that may be designated by the '& '.

  And I hope that you believe me: I've tested several times, it was only "little" change that solved the problem.

  So it seems that the ICB 2013 (SP1) is a kind of internal offset index by a repeated execution of the

  "function_XYZ (TheArray).

  but I don't know how or why but I see in debug mode by observing the expected against the values in the table received!

  At the first time the (implicit) internal index of 'TheArray' is '0', but the following times (during the execution of the loop) the internal index passes to '1' (seen in the debugger because that all the expected values were shiftet like that!).

  So there's an explicit index in the table ("function_XYZ (&(TheArray[0]))") necessary to make the first time of this clear code execution.

  There are some good improvements in 2013 CVI (SP1) and I like this environment more than the 2012 version - but:

  There are other "changes" also, in the compiler (or linker...?) that are more rigid than "in ancient times.

  The problem of this kind of error is always the 'old code '!

  It is expected of such behavior.

  The compiler/linker do not complain (a complaint would be good!) writing but he made this mistake (in a loop).

  By the way: my 'compilation Options' are set to 'Extended' (without change in the "..." ("- button - Options) and that all of the boxes, except the" OpenMP_support "-box are checked!"» So I think that I put the very rigid compiler - maybe there are some «...» ' - button - settings to get rid of this problem, but I have not found them/it.

  My request:

  -Check the stiffer compiler by the need of an explicit index

  - or switch to the 'old' behavior with "function_XYZ (TheArray)" always refers to implicit index '0' of the element "TheArray". "."

  Thank you for your messages, comments and suggestions.

  -As I wrote before - maybe it's the style of programming or error"self made"... maybe...
  .. But if I replace 'function_XYZ (TheArray)' by "function_XYZ (&(TheArray[0]))" and
  then it works... Why so and not, if bothe the same? ...

  But as long as I do not post sample code, nobody is going to accept - I accept it. So consider this post more as an allusion to the fact that of the LW/CVI 2012-2013 LW/CVI more changed than just the LW - GUI or certain features: the compiler changed its 'way to'... or almost.

  For this problem, I think that I will use the solution 'use no implicit and explicit pointers'.
  Who should be a good idea taking into account
      http://forums.NI.com/T5/LabWindows-CVI/fatal-run-time-error-dereference-of-out-of-bounds-pointer/TD-...

  mybe also only caused by wrong code... who knows... but for me it is a sufficient reason to act as I suggest above.

  Best regards,
  F.

• Please show or ask how to create the value of arrayOfValues of setValuesAtTimes parameter?

  Hello AEScriptComm,

  I have a few small scripts that use the method setValueAtTime successfully placing a keyframe on the existing layers of maskPath, but as you can see in the scripts below, results of setValueSatTimeS errors using IE: "Array is not of the correct type", "value is not an array" or "Null is not an object", depending on ,...

  (A) what variable is used as the value of parameter IE:

  .maskPath;

  . maskPath.value;

  . maskPath.value.vertices

  (B) what kind of table is used as the parameter value as in:

  var addTheseKeys = new Array ((1,2,3,4);    (as a parameter of the time)...

  (with either)

  var keyValues = new Array([10,10],[100,100],[15,50],[100,120]);             ...." ]) "

  (GOLD)

  var keyValues = [[10.10], [100 100], [15.50], [100 120]];                               ... (Array of arrays? RE: " ]] " )

  I just read a 'push' of the values in a table may be necessary?, but I was hoping someone who knew setValuesAtTimes could show it please...

  1) .. How to create the value of arrayOfValues of setValuesAtTimes parameter?

  1 (a): WORK setValueAtTime script...

  App.Project.Item (1) .layer (1).property("Masks").property ("mask 1");

  var app.project.item = myProperty (1) .layer (1) .mask (1) .maskPath;

  myShape = app.project.item (1) .layer (1) .mask (1).maskPath.value;

  myProperty.setValueAtTime(1.0,myShape);

  1 (b): If there is no script setValuesAtTimes...

  prop1 = app.project.item var (1) .layer (1).property("ADBE_Transform_Group").property ("ADBE Position");

  var fourKeys = 4;

  var addTheseKeys = new Array (1,2,3,4),

  var keyValues = new Array (10, [10], [100 100], [15.50], [100 120]);

  var app.project.item = myProperty (1) .layer (1) .mask (1) .maskPath;

  myShape = app.project.item (1) .layer (1) .mask (1).maskPath.value;

  var myVertices = app.project.item (1) .layer (1) .mask (1).maskPath.vertices;

  myProperty.setValuesAtTimes (keyValues, addTheseKeys);

  app.beginUndoGroup ("Keys");

  ~ for (var k = 0; k < fourKeys; k ++)

  //~ {

  ~ prop1.setValueAtTime (keyValues [k], addTheseKeys [k]);

  //~ }

  myProperty.setValuesAtTimes (keyValues, addTheseKeys);

  app.endUndoGroup ();

  .. Thanks for any advise\suggestions,

  J

  (A). maskPath.value; It's always a Shape(). (maskPath is a property, not of a shape on its own, and maskPath.value.vertices is only a part of the shape data).

  (B) nothing of what you propose... that is why your failed script fails.

  var keyValues = new Array([10,10],[100,100],[15,50],[100,120]); and

  var keyValues = [[10.10], [100 100], [15.50], [100 120]]; are just as good as arrays of points, the only thing is that keyValues are arrays of objects Shape().

  Read the guide and script for how to report a form of this post (just wrote it...): http://forums.adobe.com/thread/1419866?tstart=0

  Your keyValues array should look like this: [keyValues0, keyValues1, keyValues2, keyValues3], where each entry is a Shape().

  Xavier.

• Try to get the input parameter of a web service Yanick based on the value of the table

  Hello-
  
  I am new to ADF and Jdev 11 g (I'm a developer of forms). I had created a web service from a db stored pl/sql package. I can run a function with a parameter of the ADF faces.
  
  Instead of the input being entrable user parameter, I want to be based on a selected value of ADF table column. How to correlate the value of the selected row in the column as an input function parameter?
  
  I played with an ADF output text based on the table column ADF PartialTriggers the value set for the ADF... table that updates the output text based on the selected column. Can I use some kind of partial trigger on the input parameter?
  
  From a point of view of forms, I am looking for ownership of "Copy Item value" :)

  Two options:
  Declarative in tab link, as shown here:
  http://blogs.Oracle.com/Shay/2009/07/java_class_data_control_and_ad.html
  (its a method POJO but should be the same for a Web Service invoke).

  Or via code in your backing bean:
  http://blogs.Oracle.com/Shay/2009/06/setting_parameter_value_for_bi.html

• the procedure entry point GetFinalPathNameByHandleW could not be found in KERNEL32.dll dynamic link library

  Hello

  While trying to install a program, I see the following on the screen error message:

  The procedure entry point GetFinalPathNameByHandleW could not be found in KERNEL32.dll dynamic link library

  The I set him, is a Windows XP 32-bit environment.

  The I am installing, is a program, created by my own company, using a 32-bit self-extracting installer, which is also created by my own business using InstallAnywhere Flexera software.

  No changes were made on the environment of the installers.

  No change seems is done on the environment for creating installation programs (where the self-extracting installer is created): I checked the monitor of reliability/Action Center / Control Panel and no entries are present between a job and an installer without work.

  The file 'KERNEL32.dll' is mentioned in the error message, I checked his date of change, which is 11/30/2012, this should not be the cause of the problem either.

  Witnin the self-extracting installation program, a few changes were found, those who are considered at the moment, but there is no indication or not those who are causing the error message I see here.

  Does anyone have an idea what may cause the error message mentioned and how to cope?

  Thank you

  Dominique

  These types of error messages mean that the program is looking "inside" the file specified (in this case kernel32.dll) try to find a function/procedure to run called "GetFinalPathNameByHandleW" and find do not.

  The program calls the non-existent function badly or the library file is not in there.  Things do not match somewhere.

  A DLL is a library of dynamic links and files as kernel32.dll are sometimes just a bunch of procedures/functions/subroutines and all located in a single, portable file.

  In a primitive way, you can use a text editor to open the kernel32.dll file (make a copy if it your desire) and search for a string "GetFinalPathNameByHandleW" and you will not find.

  You can even search for "GetFinal", and you won't find it in the XP kernel32.dll file:

  

  But if you do the same thing on a Windows 7 + kernel32.dll you 'll find:

  

  If your program calls a function inside a DLL, but this feature does not exist in the Windows XP's kernel32.dll file.

  I think that GetFinalPathNameByHandleW was introduced in Windows Vista, so now here you would be fine.

  If who wrote your program is that it works on XP, they need to stick to the functions that are part of XP and GetFinalPathNameByHandleW isn't here, where the error.

• 'The procedure entry point DecodePointer could not be found in KERNEL32.dll dynamic link library '.

  ORIGINAL TITLE: How can I fix this please?

  I have an older version of Windows XP (Home edition) Version 5.1.  Trying to get updated with service packs, etc., I get the pop up message in the box below.  How can I fix the problem?

  'The procedure entry point DecodePointer could not be found in KERNEL32.dll dynamic link library '.

  Thank you for your help.

  The other post:

  We get an error "iexplore.exe - point of entry not found in KERNEL32.dll dynamic link library" so he was trying to use internet explore.

  In Firefox, I have automatic updates verified, but for some reason any I do not receive them.  I need all the service packs for Microsoft.

  When I try to use Internet Explorer to connect to the internet, I get a message that says "iexplore.exe - point of entry not found in KERNEL32.dll dynamic link library" How can I fix?  I get a lot of error messages related to the KERNEL32.dll dynamic link library.

  In addition, for some unknown reason, I lost my software of Microsoft - Word, Excel, etc.  I don't have the disc to recharge.

  Thanks for any help.  This kind of thing is frustrating and I really appreciate the availability of Microsoft Answers for assistance.

  Additional post:

  Im trying to update my computer with SP2 and Windows 7.  Even when I try to use I Tunes and do other things that I receive and message entry point (they vary).

  Here are a couple:
  1. the procedure for DecodePointer entry point could not be located in the line of the dynamic library KERNEL32.dll.

  2. the procedure entry point SHRRegGetValueW be found in the library of dynamic links SHLWAPI.dll.

  I have an old computer. Compaq Windows XP - Home Edition, 5.1.

  A month ago I lost my Microsoft Office software. Word and excel... it was all gone.   I have to reload the diskettes of origin provided with this computer which is about 7 years old.

  Is this thing?  I CAN go on the internet and move OK, but I can't download updates, or I Tunes or much else.

  * Original title: do not get the automatic updates.

  http://Windows.Microsoft.com/en-us/Windows/help/learn-how-to-install-Windows-XP-Service-Pack-3-SP3

  Tom Ferguson

• Re-sample a signal for the least points of data using the value average

  Hello

  I'm trying to resample a large wave to a smaller wave form. I want to use the average value of all data points in a time interval of the initial wave as the new value of the new waveform. For example I have want to resample a waveform of 100 points from k to a waveform with 1 k points, in the waveform again the value of each data point is the average of 100 data points in the old waveform. Is a convenient way to do this in labview? The VI of waveforms resample seems only provide coerce/linear/spline/FIR interpolation modes. Thank you very much for your help.

  Just use build a waveform is your decimated table, dt is climbed by the decimation factor and t0 can remain the same.

• 'The procedure entry point OpenVxDHandle could not be found in KERNEL32.dll dynamic link library '.

  'The procedure entry point OpenVxDHandle could not be found in KERNEL32.dll dynamic link library '.

  My computer was working fine, now I get this message & no matter what I try, I can't seem to solve the problem.
  If anyone knows how to fix this help please?

  Hello

  1. Once you get this error message? This error occurs when you run a specific program or out of order?
  
  2. What are the steps you tried to solve the problem?
  
  3. have you installed a recent hardware or software before the show?
   
  4. are you able to start the computer on the desk?
   
   
  Method 1:
  
  Step 1: Safe mode
  
  Start your computer in safe mode and check the number.
  
  To start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
  
  Step 2: start Clean
  
  If you are not facing the problem in safe mode, and then put your computer in a clean boot and search for the question.
  
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  
  Note: once you are done with the boot, follow step 7 of article to put your computer to normal startup.
  Method 2:
  
  Perform a SFC scan on your computer. Consult the following link:
  
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833
   
   
  
  It will be useful.

• The turning point of the value on and off under condition

  Oracle Forms 10G

  Hi gurus

  I'm quite new to forms, I have 1 requirement, I have 2 points (dot, dot XY) on the forms and the point x can be set to LOV or the user can also enter the value without LOV.

  The condition is that if the point x has received value = '03' part must be active, editable, and if the scope of the element X is set to any other value (or null), the item field there should be delivered to null, made inactive, cannot be changed.

  I'm really grateful if someone to guide me. Thank you

  Concerning

  Muzz

  
  

  Dear MUZZ

  in forms, if you disable or invisible something, its NAVIGABLE, INSERT_ALLOWED, UPDATE_ALLOWED properties were also defined as FALSE. So if you allow an element, you must set the other properties to True.

  So, your code will be

  IF :. = '03' THEN
    SET_ITEM_PROPERTY('.', ENABLED, PROPERTY_TRUE);
    SET_ITEM_PROPERTY('.', NAVIGABLE, PROPERTY_TRUE);
    SET_ITEM_PROPERTY('.', INSERT_ALLOWED, PROPERTY_TRUE);
    SET_ITEM_PROPERTY('.', UPDATE_ALLOWED, PROPERTY_TRUE);
    ELSE
    :. := NULL;
    SET_ITEM_PROPERTY('.', ENABLED, PROPERTY_FALSE);
    END IF;
  

  Manu.

• JavaScript input parameter should take the value of the element page Apex

  I have a JavaScript function which i dwonloaded ffrom net to generate bar codes

  DrawCode39Barcode(data,checkDigit).

  I call this function in the body of page attribute by using the following script

  < div id = "P5_X" > < / div >

  < script type = "text/javascript" >

  / * < ! [CDATA [* /]]

  function get_object (id) {}

  var object = null;

  If (document.layers) {}

  object = document.layers [id];

  } Else if (document.all) {}

  object = document.all [id];

  } else if (document.getElementById) {}

  object = document.getElementById (id);

  }

  Returns the object;

  }

  get_object('P5_X').innerHTML = DrawCode39Barcode('1-1-1111',0);

  < /script >

  When I run the page, the barcode for the value 1-1-1111' is generated. Please help so that when this page is running it will automatically take the value of the page item P5_X as parameter instead of hard coded value ' 1 - 1-1111'

  I think it would be simpler. You use the same id for the region and the order of the day, they must be different id

  JavaScript code can be in a dynamic action who sets fire to the loading of the page, or load Execute on the page of your page properties section.

  $('#barcode').html (DrawCode39Barcode ($v ('P5_X'), 0));

• Cannot access the value of parameter task flow when type java.lang.string

  Hi all

  I use Jdev 11.1.1.6.0 version.

  Here's the scenario. I enclose the workspace.

  A taskflow (testScope1TF) simply have 2 obligatory parameters corresponding type is String and ArrayList.

  This stubborn taskflow placed as a region in a pop up (p1) in a fragment (testScope2Fragment.jsff).

  Have a command to link to testScope2Fragment.jsff and from there, I'll put the value of the parameter.

  Pop until I can access the value of the ArrayList, but for string, it is show null. However all these setting set the same bean. What is the reason for the string parameter showing null?

  Can anyone help to understand this strange behavior.

  Here is the link to sample workspace

  https://drive.Google.com/file/d/0b-8Suq_hutEhNE01blZFUnlQdzQ/view?USP=sharing

  To run the example - ScopeTestPage.jspx run-> click on commandLink 1 -> press the commandButton control pop up 1.

  In output integrated wls console like below.

  ------------------------------------------------------------------------

  Table list size: 2

  String value parameter: null

  Here's the code-testScope2Fragment.jsff.

  <? XML version = "1.0" encoding = "UTF - 8"? >

  " < = xmlns:jsp jsp:root ' http://Java.Sun.com/JSP/page "version ="2.1" "

  ' xmlns:af = ' http://xmlns.Oracle.com/ADF/faces/rich "" "

            xmlns:f=" http://Java.Sun.com/JSF/core ">

  < af:panelStretchLayout id = "PSL1" >

  < f: facet name = "center" >

  < af:panelGroupLayout layout = "scroll".

                             xmlns:af=" http://xmlns.Oracle.com/ADF/faces/rich "" "

  ID = "pgl1" >

  < af:commandLink text = ' commandLink 1 ' id = 'cl1' partialSubmit = 'true '.

  actionListener="#{viewScope.TestScope2Bean.tesctScope2Method}"/ >

  < af:popup id = binding = "#{"p1"viewScope.TestScope2Bean.viewScopePopUp}" >

  < af:dialog id = "d1".

  title = "Pop of the scope on the view upwards the Value: #{viewScope.TestScope2Bean.testScopeView String}" >

  < af:region value = "#{bindings.testScope1TF1.regionModel}" id = "r1" / > "

  < / af:dialog >

  < / af:popup >

  < / af:panelGroupLayout >

  <!-id = "af_one_column_stretched"->

  < / f: facet >

  < / af:panelStretchLayout >

  < / jsp:root >

  public class TestScope2Bean {}

  String testScopeView = null;

  ArrayList < String > testScopeViewList = new ArrayList < String > ();

  Private RichPopup viewScopePopUp;

  public TestScope2Bean() {}

  Super();

  }

  public void tesctScope2Method (ActionEvent actionEvent) {}

  Add the code in the event here...

  this.setTestScopeView (In ViewScope Test");

  testScopeViewList.add ("sjdjshdsj");

  testScopeViewList.add ("cdsfdsfsf");

  RichPopup.PopupHints applyHoldspopUpHints = new RichPopup.PopupHints ();

  this.getViewScopePopUp () .show (applyHoldspopUpHints);

  }

  {} public void setTestScopeView (String testScopeView)

  this.testScopeView = testScopeView;

  }

  public String getTestScopeView() {}

  Return testScopeView;

  }

  {} public void setViewScopePopUp (RichPopup viewScopePopUp)

  this.viewScopePopUp = viewScopePopUp;

  }

  public RichPopup getViewScopePopUp() {}

  Return viewScopePopUp;

  }

  {} public void setTestScopeViewList (ArrayList < String > testScopeViewList)

  this.testScopeViewList = testScopeViewList;

  }

  public ArrayList < String > getTestScopeViewList() {}

  Return testScopeViewList;

  }

  }

  Thanks in advance.

  I took as look at your code. The problem is that you use a popup in the region and regions have a bit different (refer to http://www.oracle.com/technetwork/developer-tools/adf/learnmore/67-queryform-in-popup-253861.pdf) in the regions. Must be addressed the refreshment of the ifNeeded region to make your sample (see image below):

  

  Timo

• Reg. separated by commas of the values in the Text parameter

  Hello

  I tried to keep a text box parameter to contain multiple values by enabling the option 'field contains values separated by commas. But still, in my report, when I gave multiple values, I got the below error.

  ORA-00909: invalid number of arguments

  
  

  I have provided the values as below.

  001IB01141130003, 001IB01141170002

  
  

  use also all other special characters?
  

  
  

  Thanks in advance.
  

  Please try this

  Where (AC. TRN_REF_NO IN (: PM_REF_NO) OR LEAST(:PM_REF_NO) IS NULL)

• Is it possible a 0 is displayed after the decimal point when the value is rounded? (I get: 20-20, 1;) "I need 20, 0-20, 1).

  Using the effect of text "cursor", I am able to view replace "30 ° C" "35.5 ° C". My question is: is it possible a 0 is displayed after the decimal point when the value is rounded? (I get: 20-20, 1;) "I need 20, 0-20, 1). I use this code:

  Temp = effect ("Slider Control") ("Slider");

  sliderValue = Math.round(temp*10)/10;

  [sliderValue + ' ° C ' "']

  Here is the solution:

  numDecimals = 1;

  Temp = effect ("Slider Control") ("Slider");

  sliderValue = (Math.round(temp*10)/10).toFixed(numDecimals);

  sliderValue + "° C";

• Change the value of Point of Question Quiz in Captivate 9 sensitive?

  Maybe I'm missing the option, but I don't see the option to change the value of the point of a quiz question more. It used to be in the Quiz properties but I no longer see it. He moved elsewhere?

  Hmmm, I do not see the score, it is a responsive project:

  

  Have you installed the hotfix: Hot fix. Adobe Captivate 9 questions

• How to set the value of the point of application using pl/sql in the application process

  Hi guys,.

  I want a global variable (application point) whose value will be set to start when a user logs on to the application. The value will be retrieved from the database by using a sql query. I don't exactly know the syntax to set the value of the point of application in the application process. Also, I want to know what type of enforcement process should I use to set the value of the point of application, when a user starts a session. The value of the point of application varies from one user to the user.

  Help, please.

  I use apex 4.2

  Kind regards

  Waqas

  You can use the application element as a link with his name. That is to say. your point of application is named G_MY_APPLICATION_ITEM, then you can / set of access using: G_MY_APPLICATION_ITEM.

  For example

  BEGIN

  -assign as a variable

  : G_MY_APPLICATION_ITEM: = 'LARRY ';

  --

  -use in a SQL statement

  SELECT WHATEVER_COLUMN

  IN: G_MY_APPLICATION_ITEM

  FROM MY_TABLE

  WHERE USERNAME =: APP_USER

  ;

  END;

  Peter