The power range of the value of HP8720C command
I have downloaded the HP87XX driver on the site of NOR, but it contains a range of power series that is only good for the 8720 D version. Do not have access to a manual, so nobody knows what the command is to set the range of power for the model of C?
Actually clicking on the link I gave you? That points you to the list of manuals for the 8720. The fourth link there is the Programming Guide. If you did then you would have been taken to this page which has the manual programming. If you downloaded then it would then have seen that the command is
Tags: NI Hardware
Similar Questions
-
How to get the value of a command prompt in OBIEE
Hello
I am looking for a method to store the select value for a command prompt in a variable.
Thank you
Variable can be used to capture the selected value in a command prompt. Please find below the links that uses variables of presentation for various applications in OBIEE.
https://blogs.Oracle.com/ExalyticsOBIEE/entry/how_to_pass_presentation_variable
Rittman Mead Consulting"invites OBIEE dashboard: required at least one
-
Get the value of the frequency of the power spectrum
I'm rather new to LabView and want to measure the frequency of the peak in a spectrum of power of a real signal. In addition, I want this value of frequency and amplitude to save to a file. Right now I am able to trace a spectrum of power using an express VI, which gives me the correct frequency value in the graph.
However, I'm not able to extract the value of the frequency with different screws, I found in LabView after browsing through the various discussions in this forum. Can someone tell me please in the right direction? I use a digitizer NI PXI-5124 to record the signal in a rack of NOR.
If it is the dominant frequency you are looking for you can use the vi extracted a single signal. You can also change this vi to include the details of the search if it isn't the dominant frequency, I have not included it in my example, but you can check it in the help file.
Ian
-
I tried to create an interface to change attributes of my camera during the acquisition. I created a cluster that has orders for BinningX & Y, cadence, exposure and position. When the VI running everything works fine except when changing the value binning more than once, I always get an error on the second attempt. The range is from 1 to 9 and at the beginning of the VI I can't change any value in this range, but if I try to change it to something else after that, even at 1, I get an error that the value is out of range. Any idea what could be the cause?
Is attached a screenshot of part of my VI which deals with changing the values.
Thank you!
Change the order in which you pass in parameters. I had this problem several times.
Indeed, if the return on investment that you describe is out of the detection area, you will get this error.
Do not forget that the X offset + width cannot be greater than the width of the sensor and Y Offset height cannot be greater than the height sensor.
Hope this helps
-
Change of automatic color fields for the range of different values?
Hi, I am a new user of Acrobat Pro and I am trying to understand if it is possible to have the color of the field changed when the calculated value is within a specific range. I have a box of calculated field, and I want it turns to yellow when it reaches a specific numeric range and red when it gets to the other. A change in font color would work too...
The correct code might be:
(function() {}
var v = + event.value;
If (v< 16)="">
event.target.fillColor = color.green;
return;
}
If (v< 27)="">
event.target.fillColor = color.yellow;
return;
}
Value is greater than 27
event.target.fillColor = color.red;
})();
In particular this line of code is invalid:
If (27 16
) {} Something like this would be:
If (v > = 16 & v)< 27)="">
that translated to English is: If the value of the variable v is greater than or equal to 16 and less than 27...
So another functionally equivalent script could be:
var v = + event.value;
If (v< 16)="">
event.target.fillColor = color.green;
} else if (v > = 16 & v)< 27)="">
event.target.fillColor = color.yellow;
} else {/ / value is greater than or equal to 27}
event.target.fillColor = color.red;
}
I don't know if it's exactly what you want, but you should be able to revise it accordingly.
-
Catch the range of Date values
Hi, guys.
I need to check the date range that my product was available. You can use as a basis the values in the table below, but this structure can be modified to add all the things that could support the solution:
ID_PRDCT DT_STRT DT_END
1 20/01/25 12/01/12
1 01/23/12-27/01/12
1 26/01/30 12/01/12
1 28/01/12-21/04/12
1 20/04/12-25/05/12
1 24/05/12-28/05/12
1 26/05/12 05/29/12
1 01/07/12-03/08/12
1 01/08/12-16/08/12
1 18/08/12-30/08/12
1 01/12/12-31/12/12
In this case, the result of my date range should be:
1 20/01/12-29/05/12
1 01/07/12-16/08/12
1 18/08/12-30/08/12
1 01/12/12-31/12/12Hello
An the Heres how:
WITH got_new_grp AS ( SELECT id_prdct, dt_strt, dt_end , CASE WHEN dt_strt <= MAX (dt_end) OVER ( PARTITION BY id_prdct ORDER BY dt_strt ROWS BETWEEN UNBOUNDED PRECEDING AND 1 PRECEDING ) THEN 0 ELSE 1 END AS new_grp FROM t ) , got_grp AS ( SELECT id_prdct, dt_strt, dt_end , SUM (new_grp) OVER ( PARTITION BY id_prdct ORDER BY dt_strt ) AS grp FROM got_new_grp ) SELECT id_prdct , MIN (dt_strt) AS grp_dt_strt , MAX (dt_end) AS grp_dt_end FROM got_grp GROUP BY id_prdct , grp ORDER BY id_prdct , grp ;
This assumes dt_strt<= dt_end="" on="" every="">=>
If you would care to post CREATE TABLE and INSERT statements for your sample data, then I could test it.You cannot use LAG or LEAD to see where each new group starts, because the order of the dt_strt is not the same as the order of the dt_end. In other words, if you ORDER BY dt_strt, two adjacent lines could be in the same group regardless of their values, because a previous line can have a dt_end, and as a result this line would be overlapp both of them. Similarly, if you ORDER BY dt_end, no matter what two adjacent lines contain, whether they are in the same group if som rank later has a sufficient dt_strt in advance.
-
Thus,.
I have three values in column K - 'A', 'B', 'C '. Column I is numeric values.
I am trying to create a formula that selects all rows in the K column with a specfic value (in this case 'A' 'B' or 'C'), then grab the corresponding value (on the same line) of column I, then add up all the results for a total.
IF rows in column K returns 'A', THEN take the VALUE of corresponding column I, and THEN SUM all the values returned.
Or something like that.
You can try something like this:
The formula in B2, filled to the bottom, is:
SUMIF (table 1::K, A2, table 1::L)
SG
-
Get the range of values such as the value of my line
Hello
I want one of my column in the table ("for example: column name = ' GVW") appears as below
{code}
PBV
----------------
0-> 5
5. > 10
10 > 15
{code}
The values of the line comes from the table, called report_range_parameters table and it looks like in below
{code}
ID group name min_value max_value
1 gvw_group 0 5 gvw_name
gvw_group 2 5 10 gvw_name
3 gvw_group 10 15 gvw_name
{code}
Here's my INSERT sample data.
{code}
INSERT INTO REPORT_RANGE_PARAMETERS (ID, GROUP, NAME, MIN_VALUE, MAX_VALUE)
VALUES ('1 ', 'SPEED_GROUP', 'SPEED_NAME', '0', 5')
INSERT INTO REPORT_RANGE_PARAMETERS (ID, GROUP, NAME, MIN_VALUE, MAX_VALUE)
VALUES ('2 ', 'SPEED_GROUP', 'SPEED_NAME', '5', 10')
INSERT INTO REPORT_RANGE_PARAMETERS (ID, GROUP, NAME, MIN_VALUE, MAX_VALUE)
VALUES ('3 ', 'SPEED_GROUP', 'SPEED_NAME', '10', 15')
{code}
How I write a query to get the values of line like below?
-----------------
GVW |
-----------------
0-> 5
5. > 10
10 > 15
Thank youHello
SELECT min_value || ' -> ' || max_value AS GVW FROM REPORT_RANGE_PARAMETERS;
Kind regards
Published by: Walter Fernández on 12 June 2009 20:45
-
Hello community, I have a problem when creating a function. The purpose of this function is to check the table of weather gave yesterday or not. We must check this on different tables on different sachems. We are creating a function with input variables.
CREATE OR REPLACE FUNCTION IN_SCHEMA.IS_YDAYDATA_TO_TABLE
(
in_schema IN VARCHAR2,
in_tablename IN VARCHAR2,
in_datefield IN VARCHAR2,
)
RETURNS INTEGER
AS
-Declaring variables
v_is_true INTEGER.
BEGIN
SELECT
CASE
WHEN MAX (in_datefield) = TRUNC(SYSDATE-1)
THEN 1
ON THE OTHER
0
END
IN
v_is_true
Of
in_schema.in_tablename
;
RETURN v_is_true;
END;
/
When creating, I got error: [error] ORA-00942 (44:19): PL/SQL: ORA-00942: table or view does not exist
How to use the values of the input variables on the table select statement names?
Hello
Here's a way you can use dynamic SQL statements for this task:
CREATE OR REPLACE FUNCTION IS_YDAYDATA_TO_TABLE
(
in_schema IN VARCHAR2,
in_tablename IN VARCHAR2,
in_datefield IN VARCHAR2,
in_first_date DATE DEFAULT SYSDATE - 1,.
in_last_date DATE by DEFAULT NULL
)
RETURNS INTEGER
AS
-IS_YDAYDATA_TO_TABLE returns 1 if in_schema.in_tablename.in_datefield
-contains all the dates in the in_first_date of the range through included in_last_date
- and it returns 0 if there is no such lines.
-If in_last_date is omitted, the search only the data on in_first_date.
-If in_first_date is omitted, it defaults to yesterday.
-Time parts of the in_first_date and in_last_date are ignored.
-Declaring variables
sql_txt VARCHAR2 (1000);
v_is_true INTEGER.
BEGIN
sql_txt: = 'SELECT COUNT (*).
|| 'FROM ' | in_schema | '.' || in_tablename
|| 'WHERE ' | in_datefield | ' > =: d1'
|| «AND» | in_datefield | '< > >
|| 'AND ROWNUM = 1';
dbms_output.put_line (sql_txt |) '= sql_txt in IS_YDAYDATA_TO_TABLE"); -For debugging
Sql_txt EXECUTE IMMEDIATE
IN v_is_true
With the HELP of TRUNC (in_first_date) - d1
TRUNC (NVL (in_last_date
in_first_date
)
) + 1 -- d2
;
RETURN v_is_true;
END is_ydaydata_to_table;
/
DISPLAY ERRORS
If you must use dynamic SQL statements, put all the SQL statement in a single string variable, such as sql_txt in the example above. In this way, you can easily see exactly what will be executed. Comment out the call to dbms_output under test is completed.
Try to write functions that will address not only the question that you have now, but similar questions that you may have in the future. For example, now that interest you only to the verification of the data of yesterday, but later, you might want to check another day or range of days. The above function combines the convenience of a function simple (looks like yesterday data if you don't tell him otherwise) with the power of a more complex function (you can use the same function to check any day or range of days).
-
calibrate the values of 12-bit ADC
I'd like to understand how to convert integer values of a 12-bit ADC in tensions. I use a box NI USB-6008 in differential input mode. It is 12 bits of resolution in differential mode. I use a simple VI to collect 100 samples of the differential analog input voltage 0 (AI0). When I connect AI0 + and -AI0, the tension between them must be zero. When I traced the number returned by the routine of the CQI data, I see-32768 values most of the time over a few jumps to + 32752. When to convert format I16 U16 format numbers. I see values ot + 32 768 for the most part, as well as a few jumps to + 32752.See attached shot of front block diagram of the display panel.
Looks like Labview add 4 zeros at the end of the right hand of the binary number 12 bit returned by CDA. Is there a simple way to make ADC return numbers like 0, + 1, -1, when the voltage is about zero? I could do the following:
1 convert the values returned by the ADC since I16 to U16.
2 divide by 16.
3 subtract 2048.
I teach students about the basics of analog digital conversion, and I don't want to have to explain this clumsy scheme, if I can avoid it.
Thank you.
Bill
Hi Bill,
Looks like you've discovered the complement representation two that LabVIEW uses to represent signed integers. Not adjusted data are drawn directly on the hardware registers and are represented as they are on the unit.
If you want to convert the values, you can convert as you have indicated. You can also take the opportunity to explain the complement to two of them if it's as part of your course, or you can just put the arithmetic in a VI if you want to hide.
If you look at the unsigned values, you could also explain to them that it is in the voltage range, the value is.
For example, 16-bit unsigned gives a range of 0-65535. If you have selected the voltage range is-10 to + 10 v. If you have 0V, so you should expect a reading around 32768.
Here's the wikipedia article on the complement of two for reference: http://en.wikipedia.org/wiki/Two's_complement
-
Button, which initializes the values then releases control of more Boolean values
I want to create a button that turns on a series of other buttons, but then releases the control to allow individual switching. The problem is that for my project I need to run the labview file continuously so when I change a control to true switch it keeps the value of the other true Boolean values. For example, I flick a switch to turn on all the lights at the same time but want to and then later have the power of the special lights individually. Then also have the option to turn off all the lights again with a click of a button. I can't understand this. I don't have much so far, sorry for that.
Like this?
-
Hi, I want to write a program that can turn on the LED when a range of value, this is the threshold and only when the value does not reach the threshold for a period of time, say 5 seconds, then the LED will turn off, otherwise it will remain. How can I achieve this in labview? Can someone help me? Really thanks!
I assume that you use a while loop to keep the updated value.
Add a record to offset to your looping it initialize with a U32 (time in ms)
Add the registry to offset to your loop that keeps the previous value of your bool
When your reaches the threshold value => the light and set the current time in your shift register.
In the next iteration of the loop weather check value is still above threshold
=> Y-online previous set to true?
=> Y-online the next iteration
-Online N => turn switch on and set the current time in your shift register.
-Online N => subtract the time current less time shift record-online more then 5 seconds?
=> Is => keep turning on
-Online N => turn given
-
To build the waveform.vi function how to calculate the value of dt
Dear all
Please guide me How to calculate the value of dt according to waveform.vi of construction
My sampling rate is 25000 and I take 200000 samples.
Kind regards
Muhammad Irfan
It's all simple arithmetic. The inverse of the sampling frequency power of samples is then the dt or the time between samples the number of samples is not relevant.
-
Build / assign the value of elements in the array
I have an array of size 600 x 600 pixels. In a circle of RADIUS given (say 50 pixels) and origin (given th line and column jeme), I want to draw the Gaussian distribution, i.e. giving pixels
the value of a Gaussian distribution of 2D with PEAK originally. How do I do that in labview?
Thank you.
You run your x and y values through the 2D Gaussian function, but do the origin 300 300 (for your given table of 600 x 600 pixels). Here is what I get on a given intensity chart a range of 10 and sigma = 100 pixels:
Here is the code example (quick and dirty):
-
Effective way to change the values of control?
Hello
I've been using LabVIEW a little by chance to work for the last two years and have read at least a number of times that there is generally a better way to use local Variables.
In this case, I have a configuration file with 10 different digital controls for different levels of power and frequency. By choosing a ring of text I want to automatically populate the values of 'default' for these digital commands for each value of the ring of text data.
The way that I implement now is that I just a structure dealing with multiple values. Based on the value selected in the ring of text I load 10 constants in ten local variable references.
Is there an easier and more efficient way to do?
Thank you
Steven
For me it seems to be 'the' valid approach.
References can offer more flexibility, but suffer from performance degradation. Performance will not be a problem for the 10 digits, only if you place large paintings (a typical graph with 100 points, you can see the loss of performance).
Only a terminal is faster than the local (assuming you need display the value, if not of course just use a wire). Some exotic use Val Set control invoke note showed a very good area, but I think it's a little too code for just initialization of controls.
Felix
Maybe you are looking for
-
M using a 38 mm iwatch sportsman. CNT connect bluthooth headset. It is to keep looking but no new showng device. What should I do?
-
Re: Optical drive on Satellite C850-1MC does not work correctly
Hello Optical drive on my Satellite C850-1MC is malfunctioning. The drive made all the right noises and will show the CD coming in the my computer window, it will show the different tracks of audio CD but with only 1 KB of data showing and will not p
-
My pc has no hdmi port, that my tv has no vga port, how can I connect
My pc has no hdmi port, that my tv has no vga port, how can I connect
-
Mail Express 6.0 of Outlook only reaching only no recipients
I have outlook express 6.0 I can receive emails, but for some reason any emails I send don't go out. They are not stcuk in the Outbox just don't know why they don't come out. Help, please
-
W500 TPM or Bitlocker question
Hello - I have a new W500 laptop. Win7 64 bit 8 GB RAM 300 GB HDD Processor 3.06 Ghz Dual Core When I restart or turn off the laptop is seems not stopped correctly. It does not restart. The only way I can get it lit again is to hold the button for 10