The printer problem: showing the name of the file: directory: model: title: topic etc.

Similar Questions

• The missing files (NOT deleted) of the file/directory of the system drive NTFS

  Greetings!

  I have a WinXP SP3 system with a SATA 2 TB to the additional internal address as a data reader. This player has only the data (.mp3, video) files in a directory and has never been used for anything other than data files. There is only one directory for the files, and although it is four levels of subdirectories to the bottom, the tree is only these four subdirectories.

  A week ago, I noticed that the free disk space on this drive jumped from 350 GB up to 1.2 TB, leaving about 600 GB of data on the disc (about 2 500 files). After checking what is obvious (Rebreather, etc.), I noticed that the missing files were all from one file *. * to n *. * and [0-9] *. *. All files beginning with o *. * to z *. * are still there. So, essentially, Miss me about 9 000 files.

  I checked to see if the missing files could be cancelled or retrieved and downloaded several utilities 'undelete' recovery or data. All public services showed that there was no data to recover, that is, the files just disappeared or evaporated.

  Where did they go? I'm totally distraught about it.

  The files are not hidden, because the reduction of space disk; hidden files still take up the space.

  I didn't something in training in the hope of recovering the data. I thought that perhaps an index obtained corrupted or deleted because files deleted did not appear in the correct order of the directory index. I ran a chkdsk on the volume, he came to own, and the files were still missing. If the files have been deleted in alphabetical order, they would still be "deleted", recoverable files?

  I also tried to see if I could do a restoration of the system to the point in time before the files have disappeared, but my System Restore says there is nothing to not restore, no action to take.

  Any ideas appreciated.

  ....k

  R - Studio found the files missing, but only about 75% of them were really recoverable. Those who were not recovered was a length of zero byte. The advantage is that the names of the files were still intact, so at least I know which ones to re - create. The downside is that it's a few thousand files that need to be redone. That will take time, but a lot less time that I would have had to spend to recreate all missing files.

  R Studio also found entries previously deleted files, and I got these, too. However, the recovered files are damaged and unusable. Given that I didn't really need those, it wasn't a problem. I mention this simply as something that R-Studio accomplished (and the other tools do not have).

  The recovery is complete in terms of finding the missing files and restoring their readers to spare.  It took a lot of time, about three days I was doing piecemeal in bursts of 500 GB move the files recovered on spare disks. I'll move the files that I had not lost before out of the disc problem, as well, and then replace it. readers are cheap these days.   :-)

  Thanks for the help! Also, thanks for the recommendation R-Studio; This is a very useful tool and well worth the expense!

  ....k

• How to insert text in the middle of the file data model text in specific places?

  Hi all

  I need to add (text) data to specific model of existing text file locations and then rename the newly written file.

  This is a more compact and more efficient way to do it. You can optionally replace the recursive section of path with the file entry list VI. (the file IO - palette of functions of advanced files, take a look at the help file, you can search for a model in the name of the file and returns an array of the file found paths).

  Ben64

  

• copy the file directory into an Excel sheet

  How can I copy the file names in a directory/folder to an Excel spreadsheet? For example, I have 200 files in a folder. I want to copy the title of all the files in an Excel sheet to better management and add notes. Thank you

  I received an email go, but I can't respond to this e-mail address.
  Here is my supplementary question:
  "Thanks a lot for your help."
  It's one more step.
  But I want just the names of files on each cell in the Excel sheet, without the path. »

  Open the folder, and then select all the documents in question.

  Hold the shift key while clicking the right mouse button (shift + right click).
  Choose "copy as path".
  Return to the spreadsheet and choose "Paste" to paste the list of documents in the worksheet.
  This will paste the full path, including file name, of each document, as shown below.
  
  
  Is that what you meant? Please let us know.
  Best wishes
  BookwormDragon

• Delete the name of the file directory name

  Hello
  
  Col1 contain data as followins
  
  dir/Dir2/dir3/filename.ext
  dir/filename1.ext
  Dir2/dir5/filename4.ext
  dir6/filename8.ext
  
  I want to create a query that deletes the directory path all file name and returns as follows.
  
  filename.ext
  filename1.ext
  filename4.ext
  filename8.ext
  
  Wishes
  Aw j and d

  SQL> with t as(
    2  select 'dir/dir2/dir3/filename.ext' fname from dual
    3  union all select 'dir/filename1.ext' from dual
    4  union all select 'dir2/dir5/filename4.ext' from dual
    5  union all select 'dir6/filename8.ext' from dual)
    6  select regexp_substr(fname,'[^/]+$') fname from t;
  
  FNAME
  --------------------------------------------------------------
  filename.ext
  filename1.ext
  filename4.ext
  filename8.ext
  

• Internal error: failed to get the path of the file directory common 64-bit

  Help!

  I had the worst time trying to figure what to change my path to the registry to resolve this problem. What I discovered Google, I need to change the path to my shared files, it is currently

  C:\Program Files (x 86) \Common Files\

  (I added the------because I read somewhere it was causing problems with facilities)

  I have this problem with some keys:(que toute aide serait grandement appreicated!) plants

  Thank you all

  This is part of what I have listed in the register-

  http://CID-db58e4a03b3dccab.Office.live.com/self.aspx/public/current.jpg

  That matches your entries?

  Your currently connected user name can navigate at this location and records open to the breast?  They can create a .txt file empty which are there?

  C:\Program Files (x 86) \Common Files

  Is your current user have read permissions for this registry key?

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion

  Finally what programs you are trying to install?  They are compatible with Windows 7?

• Cannot delete the file/directory/app in Finder

  I tried to update WhatRoute but something went wrong. I rebooted the update and that worked well, app works.

  However, since that time I have a file in my trash, called 'WhatRoute.app' which cannot be deleted. Finder said "cannot be deleted because it is currently in use". Activity monitor shows nothing. Restarted several times, also I tried mode secure but nothing helped.

  Tried to use Terminal using the "sudo rm... / WhatRoute.app", but get an error message indicating that it was a directory that cannot be deleted.

  While it is now? an application in use or directory? And how do I get rid of him?

  Help, please!

  Make sure that Whatroute isn't in the login items, then restart the mac and try to empty the trash again.

• How to propagate the column names in the file engineering reverse to db table?

  Hello
  
  I have successfully reverse engineered column about 100 names on the first line of a file flat .cvs in a data store of file (technology) using ODI 11.1.1.
  
  Now I would like to imitate what I used to do with OWB: simply propagate these column names from my data file store flat source to my table (in the meantime) target store empty db.
  
  How can I do?
  
  ---
  
  I tried as much as one can intuitively: drag the columns in my store of source (depending on model) to my target db table that is open in the main view, but ODI Studio just opens as Inspector tabs for columns.
  
  In my loading interface, if I choose 'Temporary target', it behaves exactly as I want (rigth click .cvs file to map the tab 'Add a column to the target'), even the chains are transformed into Varchar2...
  ... only, it will not implement target as a permanent store if I uncheck 'Temporary' and I can't select and copy the entire grid to export elsewhere.
  
  Generating the DDL to create a target table db and reverse would still be acceptable to me but generating the DDL for a store file does not make sense to ODI.
  
  Any help?
  
  Thank you

  2 quick ways to do:

  1.) copies the file according to the data store and then move it to the Oracle based model.
  2.) use CFD (designer of common Format) and create a diagram in your model of Oracle based. Drag and drop the file based model in there.

• How to access the CSS files for the plugin Enkitec-database file directory navigation bar

  Apex 4.2.3.00.08

  Enkitec-NavBar-1-2-0-for-4-2

  Hi I am faced with the same question that: https://community.oracle.com/thread/2563229

  Enkitec vertical list Navbar appears momentarily until it is formatted by CSS and it seems OK.

  It is really annoying and makes pages look stupid. This problem is identified as a performance problem and can be solved by putting the support of Plugin files in directories of files instead of the database.

  I created a directory on the database server: D:\102175\Kav\Plugin

  I created a Directory pointing to the file directory database:

  CREATE or REPLACE directory PLUGIN AS "D:\102175\Kav\Plugin".

  GRANT READ THE PLUGIN DIRECTORY TO THE PUBLIC;

  GRANT READ THE PLUGIN DIRECTORY TO ANONYMOUS.

  GRANT READ THE PLUGIN DIRECTORY FOR UTVIKLING.

  I also copied the CSS etc support plugin files in the files directory.

  In the Apex plugin I changed the prefix 'file' #PLUGIN_PREFIX # D:\102175\Kav\Plugin

  Now all the Navbar formatting disappeared and now the navigation bar appears only in form of vertical list.

  I also tried to use the PLUGIN as 'File prefix' same thing.

  I'm not Apex or Web expert so I'm sure there is something that I misunderstood.

  Hope some of you are able to help out me.

  Sincerely

  Arild

  Hmmm, well it does not matter if you do the mapping. The embedded PL/SQL gateway is well integrated in the database in PL/SQL.  All your resources (images, CSS, javascript, etc.) are still be extracted from the base in order to be served to the client. Those in the file system are not in use after installation.

  This is going to be heavy.

  I think you may still be able to make some optimizations by moving the assets of plugin for a name that is mapped by the gateway.

  In your apex installation, take a look at apxldimg.sql see how records and assets are added.  You can then add the plugin files.

  See if that helps.

  In addition, you can follow the comments of Patrick on the post you are referencing and move the inclusion of files to the top of the page AND change the plugin so it does ' t add any more files.  Now in theory, you can skip the download folder and the image and add the plugin assets as standard apex post and reference them with #WORKSPACE_IMAGES # #APP_IMAGES, or # (if you add specifically for an application). But you still want to include them at the top of the page.

  Sorry... I know it's a lot of things to take and much heavier than expected.

  Thank you

  -Jorge

• Dreamweaver cs 5.5 does not not when saving the file.

  Dear Comunnity

  Kindly help if anyone knows

  Recently reinstalled Adobe Dreamweaver CS 5.5 and started having problems.

  When I work with Dreamweaver, and save the file, * .html, .php, *.css and etc. It just stop responding and I can't do anything, the Task Manager doesn't help not, cannot turn off the pc, it shows just "shutting down" and... nothing, only the power button helps me.

  It deletes the files that I am tring to save and creates * file *.tmp with code that were inside. And the problem that happens randomly, once I start and it does not respond within 2 stops, next time he responds simply does not after a whole day of work.

  Never had anything like this before.

  If anyone knows, looking forward for your support.

  Thank you!

  Try this-

  http://forums.Adobe.com/thread/494811

• The file extensions XMP and XMP for pdf and images

  I'm working on a mac software Aperture and it seems to do a very good job of handling and copy/import and export of metadata.

  I wonder two things:

  1. I know images have IPTC information elements and I wonder if there is a party any of image metadata which are the same as pdf and metadata if it may be possible to simply export the data of my images so that I can import it into my PDF. in many cases, the pdf file is created from my images (with the addition of text) so it would be very convenient to just take the metadata from my pictures and put it in the PDF files.

  2. is there a way to READ a xmp file I exported from a pdf file in Acrobat on my desk so I can see what's inside?

  Thank you

  There are three types of metadata in a PDF file:

  • Images can have their own metadata (copied from the original file when it was incorporated) - it is not visible in Acrobat, but can be eliminated with optimization PDF or disinfect.
  • The PDF file's properties (title, author, etc.) that are part of the PDF XMP schema, and you can add one of the desired (for example, using Adobe Bridge) XMP schemas.
  • The PDF file has other properties (language, print settings, etc.) that are part of the flow of content and not reflected in the XMP tree at all.

  There is nothing technical to stop integrate you anything in the XMP (including patterns IPTC Core and Extensions) stream, but they may not make sense in the context of a PDF file, especially if it contains more than one asset. For example the idea of a version of model ID is not valid unless the PDF file contains a single image.

  . The XMP files exported by Acrobat are just the XMP text files - you can open it in any text editor.

  To manage XMP metadata in PDF files, I strongly recommend the use of Adobe Bridge. Acrobat itself has very bad assumption for things like copy/paste and expansion patterns.

• Open the file sfw on a mac

  I found photo CD s of my father died from a company called PhotoWorks. It is labeled for PC use, but research in the file directory, it seems that the photos are in the .sfw format. I can't find any programs that will open. Any ideas?

  SFW or swf?

  If SFW, you can try to open it with

  graphic converter

  aData-and-more-on-your-Mac/ https://www.lemkesoft.de/en/image-Editing-slideshow-Browser-batch-conversion-met

  If SWF

  SWF is shockwave files.

  https://get.Adobe.com/Shockwave/

  or they can rarely be video integrated in what cases VLC player can open them.

  http://VideoLAN.org/VLC

• Select the files in the Ext drive to reload post reinstall

  I am back. hankbuck here with the question after complete reinstall on HP desktop D4650E windows XP Pro sp3. Very grateful for the help recently and you want to make sure that now I want to reload the files from an external drive WD My Book I do without all the garbage that caused the system to be erased with the installation. All I want are the files I want without damaged etc. Is there a way to do this? I have 1 partition on my PC after reinstall if it helps. Thank you

  hankbuck

  Hello hankbuck,

  It depends on what software you are using on the Western Digital. It seems quite a few different applications that Western Digital has and uses so to know what exact version can be beneficial.

  No matter what version you use that should have the option to do a selective restore or progress however.

  It is for example WD Backup app that works on some of my books

  How to restore data from a backup with the help of WD Backup to a hard drive WD My Book Premium Edition

• How to change the location of the file in first pro

  How can we change the file directory where your project files are stops for in first pro?  He invites you to choose when starting a new project, but the project if you want to change it how do you do?

  Hi James,

  How can we change the file directory where your project files are stops for in first pro?  He invites you to choose when starting a new project, but the project if you want to change it how do you do?

  Do it at the level Finder/Explorer. You should be fine.

  Thank you
  Kevin

• The output directory to scrub in ADF 11g BC

  Hi all
  
  I was wondering, JDeveloper cleans the output directory after deletion of an object? I ask this question because I decided to erase in one of my test applications, but the output directory (model/classes /...) always contains all the files that I never deleted.
  
  I don't know if it's important, either.
  
  Best regards
  
  Juan Manuel

  Hello

  No, it isn't. To clean the output path, select the project, and then choose Build--> Clean in the JDeveloper menu

  Frank