The problem of Chinese mice.

Similar Questions

• Problem with the translation into Chinese of msgrte.txt

  With the help of LabWindows/CVI 2012 SP1.

  I am trying to create a Chinese version of one of our applications. I have a msgrte.txt that has been translated into Chinese, and I ran countmsg.exe on update magic numbers. Countmsg.exe reports of success, and the numbers are changed.

  I replaced the following files with the new msgrte.txt for testing purposes:

  C:\Windows\SYSWOW64\cvirte\bin\msgrte.txt

  C:\Windows\SYSWOW64\cvirte\bin\msgrt4.txt

  C:\Windows\System32\cvirte\bin\msgrte.txt

  When I run the application, it blocks (unrecoverable error) whenever I do anything that requires the text in this file, for example a FileSelectPopup.

  If I use the standard version of English to msgrte.txt, the application works OK (though of course the standard popup panels have English text).

  An inspection of the eyeball of the msgrte.txt translated shows anything special on the file.

  Locale system is set to Chinese (simplified, China).

  Anyone has any ideas to identify the problem?

  I promised to report when a solution is found, so here it is:

  It turns out the format of at least some of the messages in msgrte.txt is critical and will result in the application crash if it is not correct. In my case, the message:

  1331 ' __All files (*.) " *)... »

  has been translated with a missing space character, that is to say (the Chinese equivalent of):

  1331 «files __All...»

  This message appears to be used as a filter in FileSelectPopup (and FileSelectPopupEx) specifier, so the space between the description and the designation of generic character is important.

  So if you translate msgrte.txt, be careful! If, like me, you find it translated by a third party in a language you don't understand, be doubly careful

• The volume of the recorded sound is very low when played. I tried to solve the problems through Control Panel of configuration-sound options and increased the volume to 100 form my mic too. All the other volume options, it's 100 too. It has no effect. Hel

  The volume of the recorded sound is very low when played. I tried to solve the problems through Control Panel of configuration-sound options and increased the volume to 100 form my mic too. All the other volume options, it's 100 too. It has no effect. Help needed ASAP

  Hello

  Control Panel - SOUNDS - Audio peripheral devices configuration-manager

  Make sure you write down the description and model double click top - tab drivers - write version. Now
  Click on update drivers who cannot do anything like MS is far behind the certification of drivers. Then RIGHT
  CLICK above and UNINSTALL - REBOOT - this will rebuild the driver stack.

  If your driver shows 06 you have the default windows and part of the question.

  Go to the system manufacturer's website and get the latest Audio/Sound drivers - download - SAVE - go to the place where you
  Put them - right click on Reboot - RUN AS ADMIN -.

  Check the Version on the tab of the driver in the device as a sound Manager often restoring drivers, then install
  the current version. Restart and check after each try, not uncommon to have to run the pilot of 1 to 4 times or more.
  Just make sure that the version you have installed appears in the tab of the driver.

  Then navigate to the site of the manufacturer of the device and search for the drivers more recent and repeat the installation procedure.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  ---------------------------------------------------------

  After the updated driver.

  Click with the right button on the speaker near clock - recorders - right click in the box - check show disconnected devices
  and show disabled devices - check your micro - highlight them, then lower right properties. Do
  of course the appropriate injector is enabled and check that other settings - on the levels tab make sure MUTE is not checked
  and APPLY / OK changes.

  Also in the search for some Audio Manager Panel (perhaps named after the manufacturer of the sound driver). Mine
  is the RealTek Audio Manager, yours can be quite different name if you have one.

  How to activate Audio devices hidden in Vista
  http://www.Vistax64.com/tutorials/143447-audio-device-enable-hidden-devices.html

  Connect one microphone, music player or other audio device to your computer
  http://windowshelp.Microsoft.com/Windows/en-us/help/b0e3d7fb-1b4a-4926-8254-65da289209261033.mspx

  Problems with sound and audio or no sound - a Mr Fixit
  http://support.Microsoft.com/GP/NO_SOUND

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Why do the topics become Chinese when I access my email via Firefox but not Internet Explorer?

  Why do the topics become Chinese when I access my email via Firefox but not Internet Explorer?

  Hello, this is a display caused the extension Advisor default McAfee site - please try to disable or remove that in case you have now until there's a mcafee update that may resolve the problem.

  http://service.McAfee.com/faqdocument.aspx?ID=TS100162
  https://community.McAfee.com/thread/76071

• 2558 HP HC MONITOR DRIVERS for THE WEB CAM AND MIC AND the OTHER BUILD IN DEVICES CE WHO IS BUILT IN MS7 IS BAD, AND IT SHOWS the errors of devices

  It takes the right drivers for hp w2558hc monitor, is the web cam and microphone and other devices. Now what a windows MS7 is incorrect and when the pc doc runs it says it devive pilot problesm we tried to remove the drivers, that it doesn't always, the only way to solve this is unplu cable webcam, while the device driver goes.  It was working OK in vista and when hp gave me free ms7 upgrade, when the errors started. I still have the thing he had trouble even on vista because of the blue projection. MICROSOFT and HP has to happen to get together and put the correct drivers MS7 or update the old was the last time, she was last updated 2006.  They sstesm now I have is a 64-bit MS7, we tried everything. It works but it does not just because of the problem of driver and the only way to remedy to the webcam cable monitor unplu when not in service.  It gives you 3 errors and it organizations all the internal features of this monitor as a web cam, mic. any suggestions out there?

  CF. http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/33d7bcee-b0ed-489b-a15d-c087c421cb55 ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Microsoft will solve the problem of 'Wireless Mobile Mouse 4000'?

  Because the Microsoft Wireless Mobile Mouse 4000 scroll wheel is more fluid than the other mice, and is not "on the points of many applications (including Picture Viewer from Microsoft in Windows 7)" are not recording movement in the scroll wheel :(

  These applications will record the movement when you flick madly (exaggerate your move), but on the tread of the wheel normal, nothing happens.

  After research, I understand that this is because many applications read the signal coming to the "click" or "bump" a wheel of traditional scrolling to 120 units of movement.

  It seems that the fluid motion in the Microsoft Wireless Mobile Mouse 4000 sends in increments of 30 or 40 units and these programs don't scroll unless they get a signal of 120 (that's why you have to flip through wildly).

  It's sad because it means that I don't like the mouse and I won't buy Microsoft again unless they fix it!

  I recently bought Microsoft Wireless 4000 Mouse for my laptop DELL Latitude E6410. The laptop came with the default value to the pointing device setup application. I don't have Microsoft Intellipoint software. I have Win7 64 bit.

  Here are the problems with the scroll wheel I noticed when I bought a Microsoft Wireless Mouse 4000

  (o) the scroll wheel does not scroll through the items of the combobox when the combo did NOT fall down, but has the input focus.

  for example, control panel-> mouse-> pointers-> 'Plans' combobox.

  (o) the scroll wheel does not scroll the MS Office 2007 Ribbon.

  (o) in Word 2007, the Ctrl + wheel does not zoom out

  (o) the scroll wheel does not scroll the XML Notepad 2007

  Solution:

  This solution is not mine - it was on the internet already.

  It worked for me.

  I write this with additional measures for "how to get there."

  Go to the properties of the mouse-> Hardware tab

  Select the problematic mouse in the list "mouse HID-compliant".

  Click 'properties '.

  Go to the Details tab

  Select the "Device Instance path" in the combobox control.

  A value is displayed, for example: HID\VID_045E & PID_0745 & MI_01 & COL01\8 & 5538EC & 0 & 0000

  Note This value.

  Open the registry editor and navigate to:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\HID\VID_045E & PID_0745 & MI_01 & Col01\8 & 5538ec & 0 & 0000\Device Parameters

  The "Device Instance path" is the path of the "reg" key that corresponds to this instance of the mouse.

  In the device settings, add the following keys of reg DWORD (32 bit)

  HScrollHighResolutionDisable = 1

  VScrollHighResolutionDisable = 1

  Delta = 120 (decimal)

  Remove the radio and put it back (this type of re - initializes the driver). You can choose to restart the PC, too - no matter.

  It should work.

  Initially, I didn't put the key "Delta". But because of this, it was scrolling as if I pressed the keys 'Home' and 'End' - that is, all the way to the bottom or the top. After the 'Delta' key, it worked.

• Windows 7 Home Premium 64 Bit is not the display of Chinese characters

  I have not experienced this problem before. But over the past two weeks, windows 7 can not display Chinese characters, instead, it shows a little square. Here is a picture to get a better understanding of http://imageshack.us/photo/my-images/338/chinesecharacternotdisp.png/  
  Please let me know how I can solve this problem. Thanks in advance!

  Hello

  You did changes to the computer, before the show?

  Method 1:

  a. navigate to the following location.

  C:\Windows\Fonts

  b. right-click on Ming Liu fonts and select view.

  c. now check the issue.

  Method 2:

  a. changing the locale of the system of Chinese (simplified, PRC).

  b. restart the computer

  c. change of locale of the system return to English (United States).

  d. restart the computer and check.

  Reference:

  Modify the system locale

  http://Windows.Microsoft.com/en-us/Windows7/change-the-system-locale

• What is the problem with my Dreamweaver CS3?

  
  
  I just logined here and I think I met a problem when you use my Dreamweaver CS3. I can't use the 'draw the layout table (layout only model)' and 'Draw the layout cell (model layout only)' funtion. I am new to Dreamweaver, but I used Dreamweaver for several months... I can use these functions in Dreamweaver 8.0 to do the same work...
  
  I just need a few ideas you can support for me how I can use the funtion... maybe something wrong with my registration?
  But I don't know where I can find the problem. Maybe the components of the draw layout table and draw layout cell have been lost or broken?
  
  Help me!! Lack of these futions has troubled my work so long... I really need you help me to deal with these problems.
  
  Now I use a system of Windows Xp SP2 (Simplified Chinese). I am a Chinese, who now live in China. Maybe I can't use English to express what I mean, but I think I made clear my boredom...
  
  Thanks to my utmost sincerity. No matter you can help me or not ^ _ ^ or maybe you can give me some suggest that can help me.
  
  Glance! It does not work for me!
  http://BBS.rsdown.CN/1172434896/Mon_0706/53_1410_1e5729bb7c51cc3.jpg

  > I am new to Dreamweaver

  Yes, we can see that.

  > I can use these functions in Dreamweaver
  > 8.0 to do the same job...

  This is because you are working in table view Standard in DW8, but in
  CS3 page layout mode.

  Avoid mode layout completely. Try to VIEW | Table Mode > Standard Mode...

  --
  Murray - ICQ 71997575
  Adobe Community Expert
  (If you * MUST * write me, don't don't LAUGH when you do!)
  ==================
  http://www.dreamweavermx-templates.com - template Triage!
  http://www.projectseven.com/go - DW FAQs, tutorials & resources
  http://www.dwfaq.com - DW FAQs, tutorials & resources
  http://www.macromedia.com/support/search/ - Macromedia (MM) Technotes
  ==================

  "iSprite" wrote in message
  News:f5m6c9$T0E$1@forums. Macromedia.com...
  >
  >
  > I just logined here and I think I met a big problem during the use of my
  > Dreamweaver CS3. I can't use the "layout (layout only model) Draw table" and
  > Funtion "draw the layout cell (model layout only). I am new to Dreamweaver, but I
  > have
  > used Dreamweaver for several months... I can use these functions in
  > Dreamweaver
  > 8.0 to do the same job...
  >
  > I just need a few ideas you can support for me how can I use the
  > funtion... maybe something wrong with my registration?
  > But I don't know where I can find the problem. Maybe the components of the
  > Draw
  > table layout and the draw layout cell have been lost or broken?
  >
  > Help me! Lack of these futions has troubled my work so long... I really
  > need you help me to deal with these problems.
  >
  > Now, I use a system of Windows Xp SP2 (Simplified Chinese). I am a Chinese, now
  > live in China. Maybe I can't use English to express what I mean, but I
  > think
  > I clearly expressed my pain...
  >
  > I thank you with my utmost sincerity. No matter you can help me or not ^ _ ^.
  > Or maybe you can give me some suggest that can help me.
  >
  > http://bbs.rsdown.cn/1172434896/Mon_0706/53_1410_1e5729bb7c51cc3.jpg
  > http://bbs.rsdown.cn/1172434896/Mon_0706/53_1410_1e5729bb7c51cc3.jpg
  >

• Messages of the Sierra and the problems of continuity iMessage

  I took these communities to try to resolve a problem which, for me, is as old as the first day iMessage became available for Mac.

  I can't emphasize how incredibly boring, it is completely out of sync how both are. The problems are always the same:

  (1) never are conversations in the issue of order/same on both devices. For example, for a conversation that has been exploited to iMessage on my iPhone, when I open my Mac, it appears in the notifications, like new. All the answers are there.

  (2) a conversation that has been deleted from the iPhone suddenly appears on the opening on my Mac... seriously?

  (3) the conversations that are deleted on my iPhone does not disappear in the Messages and vice versa.

  To sum it all, pretty much the case is that both apps, while they expected to work simultaneously with fluidity to do what they want when they want.

  This has been a problem since iMessage became available on Mac OS for the first time (think it was Mavericks). I've been waiting for Apple to fix this with each software update to make OSX or iOS. But guess what...?

  My Mac running OS Sierra and my iPhone 6 s more running iOS 10.0.1. Everything that could be activated in so that they can work together has been activated and triple checked. I would really like to know if anyone has a way to fix this or if there is other people are having the same problem.

  Hello

  An excellent explanation of exactly how iMessages works on iPhone and Mac.

  It does the same thing, if you add in an iPad or and iPod Touch.

  iMessages are pushed, the Treaty is called, for devices that have been associated with (by adding the Apple ID on an iPhone).

  This means that it is not as Mail where are read from the server and in the case of a POP account you can choose to let the "message" on the server if other devices can read.

  IMAP accounts will be synchronized as you say but POP will be more like the Messages app with iMessages.

  The iMessages which is addressed to you are marked by the number of devices is in the opportunity to see it.

  He pushes the devices until they respond (Accept) once this device has accepted it is removed from signage and only devices that did not have a chance on seeing.

  There is a time limit on how long the iMessages is pushed to a device (such that being away from your Mac turned off everything on vacation or phone that died or was out of range of the carrier)

  Once the device have the iMessages it is removed from the server.

  A simpler view is that the iMessages is "copied" and sent to each device and that each device can not see the other "versions" and that each "copy" is deleted from the server that happens on the device.

  The news to "read" your comments, you might see comes that of the device, it was intended to (i.e. addressing a number only the iPhone to another end may, so together, to send the reply 'read').

  Same thing with sent.  This is why you get a response, when he showed even "Delivered" as someone can answer from a connected device.

  This means that the 'Sync' is really only show on all devices and nothing do you on one device will be the effect of the other.

  It is not broken, even if this isn't what you think that told you about the device.

  You can tell them http://www.apple.com/feedback/messages.html

  

  20:31 Saturday; October 1, 2016

   iMac 2.5 Ghz i5 2011 (El Capitan)
   G4/1GhzDual MDD (Leopard 10.5.8)
   MacBookPro (Snow Leopard 10.6.8) 2 GB
   Mac OS X (10.6.8).
   iPhone and iPad (2)

• The problem of mobile safari search engine

  If you set your iPhone like China location. The mobile safari will put like google.cn search engine. But Google has pull out of China.  If you are looking for something with google.cn. Google will give you a picture.  You must click on the image and go to the google.com.hk.

  The google.cn is no longer! We need google.com!

  Please edit the files:

  /Applications/MobileSafari.app/SearchEnginesFallback.plist

  TopLevelDomains CN = > COM

  Apple is not regularly monitor the discussions. These are mostly a user in discussions.

  Send feedback to Apple. They will not respond, but at least know that there is a problem or a suggestion for change. If enough people send feedback, it can get change / suggested the problem solved as soon as possible.

  Your comments

• Lost a lot of contacts after ios 10 update, don't know what the problem is?

  After update of ios 10 I lost many of my contacts who have been saved. Went into settings, everything's fine, having a lot of problems doing my business, can you please say how the problem will be solved? Impossible to do a lot of my regular work. The problem must be solved urgently.

  Where exactly to save your contacts? Have they synced via iCloud?

• What is the problem with my iMac mid-2011

  Hello

  Need help find out what is the problem with my iMac to mid-2011.

  Yesterday during a reboot it just never came to life.

  On turning the power on, I get the RINGTONE to start and that's it. The screen is totally black. Nothing behind tried with a torch.

  VRAM rearmament so far I tried repeatedly, unplug and plug, all kinds of combinations of keys in the carillon and nothing.

  Connected to an external monitor and shows nothing of too - no signal.

  Any way that I can know what is wrong with it before sending it to the service tech? I suspect bad graphics card but how do you ensure?

  From what you describe, it looks like a hardware issue that Apple will only be able to resolve, but not to despair immediately.

  Read it please get help with graphics issues on external displays connected to your Mac - Apple Support.

  I know that the title and subject are not suitable to your concern, but buried in this document is the following passage that contains three links describing the steps to follow.

  If you can not change the resolution of your screen because you see no image, restart your Mac in safe mode to reset the default display resolution.

  If booting safe mode doesn't resolve the problem, reset your Mac NVRAM and SMC to reset the video ports on your Mac to their default values.

  That first, then write again for additional suggestions if you are still having problems.

• Someone else has Apple Airplay jumping and drop outs when streaming music?  WiFi is not the problem, and there is nothing around the units of airtime to interference.  Impossible to listen to music.  Thanks for any advice.

  I've recently updated several broadcasts in my house from V1 to V2 in the hope of resolving a constant jumping and abandonment problem I always had when playing music with Airplay.  I have a unit of airtime plugged directly on my stereo receiver that feeds music throughout my house.  My WiFi connection is not the problem and there is nothing to cause interference.  Airplay modules are not more than 15 feet distance modem or range Extenders.  Someone else has this problem and, hopefully, a solution?   I'm tired of doing factory reset all the time.  Many thanks for any advice.

  I've recently updated several broadcasts in my house from V1 to V2 in the hope of resolving a constant jumping and abandonment problem I always had when playing music with Airplay.

  By "Airplays" what are you actually refers to... Base station airPort Express, Apple TV, or something else?

  ... and "V1 to V2" do you mean you replaced a 1st generation 802.11n AirPort Express with a 2nd generation?

  Airplay modules are not more than 15 feet distance modem or range Extenders.

  When steaming audio with AirPlay, the flow goes first to the device host to iTunes to the router Wi - Fi, this unit is connected to. From there, he will travel to the AirPlay "speaker". A president could be an AirPort Express, Apple TV or an AirPlay device ready another manufacturer. If you use line extensions, the flow must go through those as well... so there is potential bottlenecks between the host and the speaker. One of these could be the cause of the issue you found.

• The problem with Safari.

  Hello

  Sorry for my English (I'm Polish)

  they have not found a solution to my problem and I'd be hard pressed to describe precisely to throw a movie describing the problem.

  Namely, when I turn Safari on my dock Safari disappears and the bar settings at the top. I can't change the settings of Safari, I have no option to minimize the browser.

  The dock bar and comes when I click on the free field office.

  Feature film presented with a problem-> https://youtu.be/2p2sXrPq86A

  Can someone tell me how to change it, to make it like before?

  Thanks in advance for your help.

  Concerning

  The Safari menu bar looks like Safari is in the Mode full screen (no yellow button and the menu of the Finder and the Dock disappear), but the application does not have the entire screen. Never seen that before...

  A few suggestions:

  1. click on the green button several times.

  2. check your display settings to confirm your ID to monitor using the native screen resolution;

  3. restart your computer in Mode safe.

  DAJ znać co się dzieje.

  ------

  Start the Mac in Safe Boot mode by holding down the SHIFT key at startup. Secure boot is quite slow because the operating system does a lot of cleanup and verification tasks, so give it time. Once you're completely connected, restart normally.

• After updating my iPhone 6 (9.3.4) the WiFi signal becomes very low! I did everything, but the problem does not stop! I don't a not update my other devices & their very good WiFi signals. Please help me solve this terrible problem...

  After updating my iPhone 6 (9.3.4) the WiFi signal becomes very low! I did everything, but the problem does not stop! I don't a not update my other devices & their very good WiFi signals. Please help me solve this terrible problem...

  Here's a tip for the user on the problems of Wi - Fi. Suggest from the top and bottom. Maybe one of them will help you.

  (1) restart you device.

  (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

  (3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth). Channels 1, 6 or 11 are recommended for 2.4 band.

  (4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

  (5) disable the prioritization of device on the router if this feature is available. Also turn off all apps to VPN and retest the Wi - Fi.

  (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

  (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

  (8) backup and restore the device using iTunes. Try to restore as New first and test it. If ok try to restore the backup (the backup may be corrupted).

  https://support.Apple.com/en-us/HT201252

  (9) go to the Apple store for the evaluation of the material. The Wi - Fi chip or the antenna could be faulty.

  Council: https://discussions.apple.com/docs/DOC-9892