the process does not meet a key
HelloI have a process in my application that is not responding to press the button all of a sudden, this happened several times and I used to create the page again and create each item individually as the copy of the page copy the same error as well.
I know that my problem is ambiguous, since I have no specific details, but I would like you help me find the reason of why the press button does not trigger the process.
Thank you
Hi Debbie,
have you checked your process conditions, i.e. If the button is always affected?
Maybe a stupid question, but I have had the experience of a missing assignment (point name of the button has changed to a random number in the section "when button pressed", the process was triggered is no longer) several times now, without any manual changes to APEX 4.0.2.00.07.
APEX what version are you on?
Thank you
Sandro
Tags: Database
Similar Questions
-
I have a Thinkpad T450s and I'm trying to update the BIOS version 1.19 to 1.20. I've created a live usb with the 'el tortio' - image extracted using linux "dd". Once I boot on the USB under Legacy-BIOS and select upgrade, it proceeds witht the error message "the process does not have this system. The process has been cancelled. "I have disabled the protection against theft, AMT (I think this is the option) and I'm sure that I use the correct .iso file from the downloads section. I don't have a Windows operating system installed, but I'm able to start in various linux distributions using Legacy and UEFI methods.
Here is my BIOS information.
"Manage 0 x 0031, DMI type 0, 24 bytes.
BIOS information
Seller: LENOVO
Version: JBET54WW (1.19)
Release date: 06/11/2015
Address: 0xE0000Runtime size: 128 kB
ROM size: 16384 KB
Features:
PCI is supported
PNP is supported
BIOS is extensible
BIOS shadowing is allowed
Boot from CD is supported
Selectable boot is supported
ACPI is supported
Legacy USB is supported
BIOS boot specification is supported
Targeted content distribution is supported
UEFI is supported
BIOS version: 1.19
Firmware revision: 1.2 "What could you suggest to get the update disc to recognize my system?
I think I've fixed the problem, I formatted FAT16 USB drive and not in FAT32 and also when you use the geteltorito command, it is preferable to use the-o option rather than a redirection ">"syntax. " An article said that it is best to drop in a DOS command line using the USB boot, then run dosflash.exe from there, however, I could not edit the .bat file, but it is an option however.
I hope this helps someone stuck in a similar situation.
-
1 LASERJET PRO CP1525nw
2. Windows XP
3 error: the system does not satisfy the installation requirements. the software does not support this version of Windows. Search hp.com for more information on this product compared to this error.
4. no change
Thanks, but I arrived on the support desk and the problem was that for XP, you use the printer Install "Option in the drop down box and then select the"TCP/IP"Port, if you choose the option 'Wireless'.
-
the keyboard connect Windows XP very well, but after the upgrade to Windows 7, I am unable to pair. I can generate a pairing code, but the keyboard does not respond. Suggestions?
Hi Amberlina,
This problem may be caused by damaged or incompatible drivers. I suggest you to consult the help articles and check if it helps.
Troubleshooting: keyboards
http://www.Microsoft.com/hardware/en-in/help/support/troubleshooting/keyboard/wireless-Bluetooth
I can't get my device to pair with my computer.
http://www.Microsoft.com/hardware/Bluetooth/en-us/default.mspx
Troubleshoot the incidents of the response to the mouse or wireless keyboard
http://support.Microsoft.com/kb/838398
Let us know the status of the issue. If you need help, please after return. We will be happy to help you.
-
I ran a copy of the diagnosis. How can I get this valid and stop the pop ups?
Diagnostic report (1.9.0027.0):
-----------------------------------------
Validation of Windows data-->
Validation status: sync clock error
Validation code: 10
Code of Validation caching: n/a
Windows product key: *-* - GD6GR - K6DP3-4C8MT
The Windows Product Key hash: s2kt66ZJWfV4nS1wFD5F9bxTSDw =
Windows product ID: 55277-OEM-2111907-00102
Windows product ID type: 2
Windows license Type: OEM SLP
The Windows OS version: 5.1.2600.2.00010300.2.0.hom
ID: {28757DCF-A530-43F8-83B8-02FB7564A74F} (3)
Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: Registered, 1.9.42.0
Signed by: Microsoft
Product name: n/a
Architecture: n/a
Build lab: N/A
TTS error: n/a
Validation of diagnosis: 025D1FF3-230-1_E2AD56EA-765-d003_E2AD56EA-766-0_E2AD56EA-134-80004005
Resolution state: n/aGiven Vista WgaER-->
ThreatID (s): n/a
Version: n/aWindows XP Notifications data-->
Caching the result: 10
File: Yes
Version: 1.5.532.2
WgaTray.exe signed by: Microsoft
WgaLogon.dll signed by: MicrosoftOGA Notifications data-->
Cached result: n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002
OGAExec.exe signed by: n/a, hr = 0 x 80070002
OGAAddin.dll signed by: n/a, hr = 0 x 80070002OGA data-->
Office status: 109 n/a
OGA Version: N/a, 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Office Diagnostics: 025D1FF3-230-1Data browser-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; INTERNET EXPLORER 6.0; Win32)
Default browser: C:\Program may Explorer\iexplore.exe
Download signed ActiveX controls: fast
Download unsigned ActiveX controls: disabled
Run ActiveX controls and plug-ins: allowed
Initialize and script ActiveX controls not marked as safe: disabled
Allow the Internet Explorer Webbrowser control scripts: disabled
Active scripting: allowed
Recognized ActiveX controls safe for scripting: allowedAnalysis of file data-->
Other data-->
Office details:{28757DCF-A530-43F8-83B8-02FB7564A74F} 1.9.0027.0 5.1.2600.2.00010300.2.0.hom x 32 *-*-*-*-4C8MT 55277-OEM-2111907-00102 2 S-1-5-21-2000478354-152049171-1060284298 Dell Computer Corporation ,Inspiron 8200 Dell Computer Corporation A11 20040107000000.000000 + 000 Dell, Dell Computer, Dell, Dell system system system 32083607018400D 2 0409 0409 Time(GMT-05:00) Standard is 0 3 109 License data-->
N/AWindows Activation Technologies-->
N/A--> HWID data
N/AActivation 1.0 data OEM-->
BIOS string matches: Yes
Marker of the BIOS string: A000:Dell Inc. | A000:Microsoft Corporation
Marker of OEMBIOS string. DAT: Dell, Dell Computer, Dell, Dell system system systemActivation 2.0 data OEM-->
N/APlease check your time system and date and region settings - your clock is too far from the server
-
I am on a site I visit every day, Facebook, for example. It has a link to a story or perhaps an invitation for something I want to know more. I click on the link that opens a new window but nothing happens I'm looking at a blank window. This same problem occurs with clicking on links in an email from trust. I did not have this problem with the previous version.
Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions of the origin of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).
- Makes no changes on the start safe mode window.
- https://support.Mozilla.com/kb/safe+mode
-
I use Windows Vista Home Basic on a Dell Inspiron 1501. I have recently accepted that some guest downloads Windows with terrible results. First downloads do not appear to have been accepted and the system of guard stop and startup trying to cancel. Second as I result, I seem to have lost access to a range of Windows tools. For example in Panel I can't open system icons or Windows Update. Nor can I access these services from any other avenue on the computer. Whenever I have find an icon or a file screen flashes a dialog briefly and then disappears. The effect of this is that I'm completely unable to access or to implement the recommended tools or services that could solve this problem. My ability to manage my computer has been reduced to zero. Dell were not receptive and I can't get a response from Microsoft
worm post private information such as numbers of mail or telephone!
Ideas:
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
One thing you can try try the system restore, safe mode.
Start the computer in safe mode with networking capabilities (hold DOWN F8 while the computer starts).
To start your computer in safe mode, you can check the link below:http://windowshelp.microsoft.com/Windows/en-US/help/323ef48f-7b93-4079-a48a-5c58eec904a11033.mspx>
-
I want to talk to a professional - not to anyone
To the link below, click on the still need help? option in the blue box below and choose the option to chat or by phone...
Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache. If it fails to connect, try to use another browser.Creative cloud support (all creative cloud customer service problems)
http://helpx.Adobe.com/x-productkb/global/service-CCM.html ( http://adobe.ly/19llvMN ) -
Develop the module does not meet all of the changes.
Version 5.7. Updated graphics driver. Program and SSD cache with 50% free space. When I hit the button crop, the image goes gray. all the adjustment knobs do not visually respond to any changes. Thought maybe it was a problem of use of disk, so I moved the program and the SSD cache, but always a problem. Previous versions uninstalled and reinstalled with the same results. Any suggestions?
Information system
GeForce GTX760
CPU i5-4670
16 GB OF RAM
2560 x 1440
Windows 7
The gray screen in development is often caused by a bad monitor profile, usually one that got installed by a graphics driver. How do calibrate you your monitor? You will need to recalibrate. If you calibrate your monitor (you really should!) go into the properties of your monitor pane and delete any profile see you associated with the Analyzer and restart Lightroom.
-
When published, the information on the project does not meet.
Have created many projects using captivate, but whatever the reason this particular problem, it is disconcerting. Imported a PP in Captivate 6 platform, when 'release' is selected the "Project Information" is empty. Result is a mistake by posting them in our Cornertone LMS system, as he says that there is an error "invalid file".
Check the settings against other projects and the parameters are the same. I tried to publish another computer and got the same results.
Operating system windows 7, however, this has not changed in relations to other projects that have been created.
Any suggestions?
Thank you in advance.
Hello
Please check if it happens on an empty project like this? If not, then it seems that the project is corrupted somehow. Try copying the project and paste it on the new blank project and see if it is Woking.
Kind regards
Mini,
-
APX1099 process does not respect the "output Destination.
Hi friends!
I have run the APX1099 process to print COPY B 1099 files and I'll put the 'output destination' until I run it:
P.S. I have administrative privileges for this directory.
But the files are generated in a different directory and I can not find where this directory has been created (\appserv\prcs\psdev\files\XMLP). The process does not have the 'output destination' that I put forward.
Does anyone have an idea what could be causing this problem?
P.S. The output location in report definition routine is defined as "all":
Thank you very much for your help!
Kind regards
Tarsio Alvares
Tarsio Alvares based on code, I see in the App Engine, writing of file is not managed.
You can see that OutDestType = 6 (Web) and % OutDestType = 3 (printer) are dealt with. Technically, should also have some code for % OutDestType = 2 (file) to cover for the file option.
You will need to write the following code to operate temporarily. Moreover, wear it like a SR with Oracle that this appears to be a delivered report and should be able to print to file.
If OutDestType = 2 Then %
& REPORT_DEFN. OutDestination = FilePath %;
End - If;
As follows:
Let us know if that helps. Once I added this code, it seems to work very well when I'm printing to a file. Thank you!
-
System (redirect) does not meet the requirements
I tried to install intel graphics 4000 hd in my system which is inspiron 15 but it shows me the error that the system does not meet the requirements. I don't know how to do it. And that's why another AMD Radeon 8730 M graphics card may not work correctly. So, what can I do?
It would seem that you have a laptop, then you better make this post in the portable computer Forum here:
http://en.community.Dell.com/support-forums/laptop/default.aspx
Bev.
-
Acer Aspire E5-511-P7SJ reinstalled with windows 7 32 bit. Brightness of the screen does not
I use Acer Aspire E5-511-P7SJ windows.81 preinstalled. The system had Intel HD Graphics. I formatted the system and load windows 7 32 bit. After windows 7 installed, I am not able increase or decrease brightness.
How can the problem be solved?
At present, the system has Standard VGA Graphics Adapter. I tried and it driver from this link https://downloadcenter.intel.com/ /23763/Intel-HD-Graphics-Driver-for-Windows-7-8-8-1-32bit HD graphics card
When installing, it says "the computer does not meet the minimum requirements to install the program.
What are the solutions? Please advice
Hello
Have you tried the Intel HD graphics driver for Pentium N3540:
J1750 processor Intel® Pentium® /J1850/J2850/N3510/N3520/N3540 N2805 / N2806 / 2810/N2815/N2820/N2910/N2920/N2940 n with Intel® HD Graphics
-
APEX process does not...
Hello
I need help with a problem of apex. The problem is that the process does not work.
Process header before
declare
P12_STANDARD_USER VARCHAR2 (15);
Begin
If P12_STANDARD_USER is not null then
insert into user_default
(employee_number, default_user)
values
(: P7_EMPLOYEE_NUMBER, 'Yes');
On the other
insert into user_default
(employee_number, default_user)
values
(: P7_EMPLOYEE_NUMBER, 'no');
end if;
end;
p12_standard_user is a page item yes/no on the same page (12) as the process. Does anyone know what I did wrong?
I use apex 4.2Thanks in advance
concerning
ELCOELCO
ORA-06550: line 1, column 29: PLS-00222: no function with name 'MESSAGE' does exist in this scope ORA-06550: line 1, column 7: PL/SQL: statement ignored
You get the error is because apex_debug.message is a procedure instead of a function that is expected.
Sorry for the confusion but I meant for you to put code debugging with your existing code. For example
apex_debug.message('P12_STANDARD_USER is '||:p12_standard_user); If :P12_STANDARD_USER is not null then insert into user_default1 (employee_number, default_user ) values (:P7_EMPLOYEE_NUMBER, 'Yes' ); Else insert into user_default1 (employee_number, default_user ) values (:P7_EMPLOYEE_NUMBER, 'No' ); end if;
Now, the entrance is zero, so it does not insert the employee_number more too.
If you take just the debug message then how did you come to the conclusion that the value of P12_STANDARD_USER is indeed empty.
Now, the entrance is zero, so it does not insert the employee_number more too.
Do you mean that no new record has been inserted. Seeing that your code is an if of another construction if the code is running there should be a new record.
What it is not record inserted new means that the code of you is not running for some reason any. Is there a condition on the process.
Display Yes/No
You don't mean that the page element is display yes/no type. Which displays a list of selection with two values.
Are you course there is no invisible characters in the value parameters that must be empty.
I have a button Save as submit.
Do you mean that the process should run when you click on the "Save" button. If so, any reason why the point process of the process is "Header" and not "submit"?
Nicolette
-
David Powers Lesson10 - "does not meet the requirements of an image.
Hello
I have a problem to download lesson10 image. It still shows the error message "not satisfying the requirements of an image" even the size of the image, the width and height to meet validation. This is upload_images.php
My download file size is 160K with 640 pixels wide and 480 pixels high. Help, please. Thank you.
upload_images.php
----------------------
<? PHP
$uploader = new Zend_File_Transfer_Adapter_Http();
$uploader-> setDestination ($destination);
$uploader-> setOptions (array ('ignoreNoFile' = > TRUE));
$files = $uploader-> getFileInfo();
$filenum = 1;
foreach ($files as $file = > $info) {}
$file = 'picture {$filenum} ";
$caption = $_POST ['caption {$filenum}"];
If (isset($_POST["place_id{$filenum}"])) {}
$place_id = $_POST ['place_id {$filenum}"];
} else {}
$place_id = NULL;
}
$filenum ++;
If ($uploader-> {isUploaded ($file))}
$filename = $uploader-> getFileName ($file, FALSE);
$uploader-> addValidator ('Size', FALSE, 500 kB');
$uploader-> addValidator ('MIME Type', FALSE, 'image');
$uploader-> addValidator ('ImageSize', FALSE, array ('minheight' = > 50, "minwidth" = > 100 "));
{If (! $uploader-> {isValid ($file))}
$errors [$filename] = "$filename does not meet the requirements of an image;
} else {}
$no_spaces = str_replace (' ', '_', $filename, $renamed);
$uploader-> addValidator ('Extension', FALSE, 'gif, png, jpg');
$recognized = FALSE;
If ($uploader-> {isValid ($file))}
$recognized = TRUE;
} else {}
$mime = $uploader-> getMimeType ($file);
$acceptable = array ('jpg' = > ' image/jpeg')
'png' = > ' image/png ',.
('gif' = > ' image/gif');
$key = array_search ($mime, $acceptable);
If (! $key) {}
$errors [$no_spaces] = "$filename is an unrecognized image type";
} else {}
$no_spaces = "$no_spaces." $key ';
$recognized = TRUE;
$renamed = TRUE;
}
}
If {($recognized)
get the names of existing files
$existing = rewinddir(3) ($destination);
check if the name of the downloaded file is in the table
If (in_array ($no_spaces, $existing)) {}
get the position of the last period
Use it to get the base name and extension
$dot = strrpos ($no_spaces, '.');
$base = substr ($no_spaces, 0, $dot);
$extension = substr ($no_spaces, $dot);
initialize a counter
$i = 1;
use a loop to add the counter after database name
check if the new name exists in the table
{}
$no_spaces = $base. '_' . $i++ . $extension;
} While (in_array ($no_spaces, $existing));
$renamed set to true
$renamed = TRUE;
}
$uploader-> clearValidators();
$uploader-> addFilter ('Rename', array ('target' = > $no_spaces, $info ['tmp_name']));
$success = $uploader-> receive ($file);
If (! $success) {}
$errors [$no_spaces] = implode('.) (', $uploader-> getMessages());
} else {}
$uploaded = '$filename downloaded successfully ';
If {($renamed)
$uploaded. = "and renamed $no_spaces.
}
$images [] = array ('name' = > $no_spaces,)
'caption' = > $caption,
('place_id' = > $place_id);
$messages [] = $uploaded;
}
}
}
}
}
I finally solved it. For your information, I use php version 5.4.3 and MAMP 2.2. Here are the changes:
(1) open the php.ini file
Search for "extension = php_fileinfo.dll" and delete.
(2) download the package files GNU for windows http://gnuwin32.sourceforge.net/downlinks/file-bin-zip.php.
Extract the zip file.
(3) copy 2 of the file in the extracted, folder/share/file/Magic and... /share/file/Magic.MGC and paste in the folder extra/php/magic
folder. (Create the magic folder in the new folder).
(4) stop MAMP all services and services to start.
It will work for you!
Maybe you are looking for
-
I want to hide my speaker notes from the hearing, but I want to see them in my mac. my version is 6.6.2 (2571). What is possible to do?
-
Hi, I updated windows xp with service pack 3 (in order to get Skype to work), but now that firefox does not open, it says that it cannot find a dll file. I tried to run into the mod for compatibility with earlier versions of windows, but it does not
-
Battery satellite click Mini L9W - B
I use Battery Bar to monitor the use of the battery and it is display 10% & 11% wear on both batteries after 3 weeks of use. Anyone else noticed high battery wear? Could be a software problem as the amounts of wear and tear up and down.
-
After these recent MS Update, Wireless will not connect XP PRO Dell Inspiron 510 M
After a recent Update MS, my wireless is not connecting to my home network. I've set up as a network secured using WEP. I checked that the key/password is correct. He gets in that the acquisition of the IP address, & goes no further. I downloaded w
-
Hello! I have a problem with my computer when it starts up, a blue screen appears, there is a message and an error code: STOP: 0X0000000A (0 X 0000000000000000, 0 X 0000000000000002, 0 X 0000000000000001, 0XFFFFF8000328097C) I tried to boot into safe