After these recent MS Update, Wireless will not connect XP PRO Dell Inspiron 510 M

Similar Questions

• My wireless will not connect WIN8/8.1/10

  I just want to start by saying it is a well known problem, but I looked and didn't see any patches for this, I checked tons of threads & messages on more than 10 Web sites & found nothing.

  I tried the following:
  I tried FN + F2, I tried F2
  (my airplane mode key is F3 so I tried FN + F3 & just F3)
  I entered my disabled & reactive Device Manager my driver wireless 3 times or more.  I restarted my laptop.

  I've been on WIN8.1 when I got this laptop & I did a factory reset in December was returned to WIN8 so about a week later I had a
  notification saying updated to WIN8.1 (I'm assured it was an official update) & I did. Once this happened, that I used it for a few days I noticed that my wireless was turned off. I therefore tried to turn it on using the settings & nothing happened. He froze in the off position. I then tried using airplane mode and nothing worked so I decided to upgrade to windows 10 to see if it would fix it. Nothing happened. I don't know what there is to do.     If you guys need my wireless network card information:

  Qualcomm-Atheros AR8151 PCI - E Gigabit Ethernet Controller (NDIS 6.30)<--- im="" guessing="" thats="" the="" ethernet="" one="">
  Qualcomm-Atheros AR85B125 wireless network adapter. They are updated & lit.
  I have a Gateway Laptop
  I found this information on the bottom, so I think this is the model & do or something
  Gateway EG70BZ NE71B06U

  NOTE: I don't think that there is a switch wifi on this laptop, I looked

  Hello

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that you can not connect to internet.

  This could be due to change in the settings.

  I suggest you to refer to the Microsoft Articles below and check if that helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-networking/connect-to-Internet-is-greyed-out-with-airplane/ca700c38-d9d9-48c1-ba8d-85d3456b1827

  http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-networking/unable-to-turn-on-the-Wi-Fi-connection/700468a4-963C-4815-9120-79ec97e6da6e

  You can also view;

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-81&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• Wireless will not connect winxp - sp3

  I just do a restore on a compaq presario v4000.  network cable and internet works fine.  Unable to get a wireless ip address.  have updated driver, bought an external wireless-card will get an ip address.  When I put a static ip address, it says it's connected, but still not recognized by the router or can not access the internet.  other devices on the network are very good.  Reset everything, adjusted the settings of the card, disabled wzc, reactivated, rebooted the router and laptop computer, uninstalled and reinstalled the wireless devices.  turned off the firewall and anti-virus-no joy.  congested DNS, winsock reset, rebooted... nothing.  It's driving me crazy.

  C:\>ipconfig

  Windows IP configuration

  Ethernet card 3 wireless network connection:

  The connection-specific DNS suffix. :

  ... Autoconfiguration IP address: 169.254.5.95

  ... Subnet mask: 255.255.0.0.

  ... Default gateway. :

  Ethernet connection to the Local network card:

  The connection-specific DNS suffix. : domain_not_set.i

  IP address...: 192.168.1.70

  ... Subnet mask: 255.255.255.0.

  ... Default gateway. : 192.168.1.1.
  I don't know what else to try... any suggestions?

  If disabling all security features on the router (encryption, MAC filters, etc.) does not work, then check the router use the same mode of wifi as your wireless adapter.  It is most frequently observed with older wireless-B adapters where the router is configured for wireless - g only, but it could also be that you have a new router Wireless N only the value and your wireless - g adapter.

• Why preferences will not respond on my dell Inspiron with vista OS?

  Screen savers or display settings did not rspond to settings to manipulate the Office of how I want it to be.

  Hello

  1. Have you logged as administrator?
  2. What version of Windows is installed on the computer?
  3. What exactly happens when you change the settings?
  4. You get the error message?

  I suggest you to follow these steps and check if that helps.

  Method 1:
  Try to perform the audit and the boot if it helps;
  http://support.Microsoft.com/kb/929135

  NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.

  Method 2:
  Try creating a new user account and check if this may help;
  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  Article I gave in these steps are for Windows 7, if you use another version of Windows, let us know so that we can help you.

  It will be useful.

• Smart keyboard will not connect to pro

  SMart keyboard worked ok first day.

  Now used to sync with iPad pro.

  The keyboard now works. I didn't set up properly this time.

  Instructions not clear, but everything is OK now. Overall very pleased with the pencil drawing as well.

• After the recent windows update August 16, 2012, my connection to Internet is not working...

  Hello

  I use a laptop HP Pavilion with Windows Vista. August 17, 2012, my connection Internet has stopped working. He was showing 'Local' only against the State of the connection, even if my cable internet and routers wireless work correctly. I have connected to the internet from another computer using Windows XP.

  After having tried many options to solve the problem of the internet for fews and realizing none of them solved my problem: (, I decided to restore the computer to the factory settings on August 19, 2012.) But to my surprise, system recommended to restore to an earlier date (before these recent automatic updates are made on August 16, 2012). I thought to try and to my surprise, my connection Internet started working :).  Which made me think that something that happens in the recent update that is causing my internet connection does not work.

  At the beginning I was in doubt, but now I'm fully convinced as next morning of day again my internet connection stopped working again. I checked Windows update history and realized again automatically updates performed on August 20, 2012. I restored my computer to the previous version before updates again and the Internet started working.

  Here's what I see in the history of the update for that day.

  Update of security suites for Microsoft Office 2007 (KB2596856)

  Cumulative security update for Internet Explorer 9 for Windows Vista Systems (KB2722913) based on x 64

  Update security for Windows Vista for x 64-based systems (KB2731847)

  Update security for Windows Vista for x 64-based systems (KB2712808)

  Update of security suites for Microsoft Office 2007 (KB2596615)

  Update security for Windows Vista for x 64-based systems (KB2705219)

  Windows x 64-August malicious software removal tool (KB890830) 2012

  Can anyone help answer more?

  -What day could cause this problem?

  -How can I just remove this one update which may cause a problem (I'd like to get the other automatic updates in the future, so don't want to disable the auto update)?

  The guys at Microsoft told me, problem is introduced by McAfee.  Here is the link for the solution to the problem.

  http://service.McAfee.com/FAQDocument.aspx?ID=TS101446

  I didn't try it myself, as my internet problem is automatically solved in a few days. I think that my version of McAfee must have automatically been updated, which may have solved the problem.

• My laptop Sony VAIO with Vista will not connect and stay connected to my wireless internet.

  My laptop Sony VAIO with Vista will not connect and stay connected to my wireless internet.  All other laptops in the House are perfectly.  Internet disconnects, says local only, then reconnects constantly making internet hard work.

  Hi Tinkerbellfancolorado,

  1. When is this last work fine?
  2. Do you receive an error message or error codes?
  3. Recent changes on the computer?

  There could be several causes for this problem.

  Try starting with these methods.

  Method 1

  Step 1

  1. Open Network Diagnostics by right-clicking the network icon in the notification area, and then click diagnose and repair.
  2. Make sure that all cables are connected (for example, make sure that your modem is connected to a working jack or cable phone connection, either directly or through a router).
  3. Reset your modem and router. Remove the power cord from the modem or router, wait at least 10 seconds, then plug in the modem and/or router back.

  Step 2

  Another reason may be windows disable your network adapter to save power. Turn off the power saving option in the properties of the network (wired network only cards) card:

  1. Open network connections by clicking the Start button, clicking Control Panel, clicking network and Internet, click network and sharing Center, and then clicking manage network connections.
  2. Right-click on the connection and then click Properties. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  3. On the Networking tab, click Configure.
  4. On the power management tab, clear the allow the computer to turn off this device to save power option, and then click OK.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Method 2

  Temporarily disable the firewall, and check the status.

  NOTE: To re-enable the firewall after check you the status. If you are connected to the Internet or a network during the time that your /firewall antivirus software is disabled, your computer is vulnerable to attacks.

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  Hope that was heloful.

  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think

• When I try to download my updates, they will not download

  Every time I have try and download my updates, which they continue to not download

  Hello

  Error messages or specific updates that are not download. Below will fix it many General
  issues however a better description of what you see could help us help you.

  Try to disable UAC and then make the bottom - reactivate later.

  Panel configuration-Classic view - user accounts - turn User Account Control Off

  How to turn User Account Control (UAC) on or off in Vista
  http://www.Vistax64.com/tutorials/48893-user-account-control-UAC.html

  THIS UTILITY MAKES IT EASY TO

  http://www.tweak-UAC.com/
  Tweak UAC utility - easily put UAC into Silent Mode or POWER

  ------------------------------------------------------

  After the foregoing:

  Try this 1st to see if it helps, and it should:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  ------------------------------------------------------

  If necessary :

  Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
  or the update itself - double click a view more information (or click top then discovers on the right)

  Those who will take you to a page where you can download the update.

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------
  Because these are all Office updates you might get more information if necessary in the Agency of those groups that
  may have experienced the same problem.

  Office newsgroups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Microsoft.public.office.misc discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Satellite 100-192: questions after the recent MS update...

  Satellite 100-192.

  After the recent MS update I had the problem with the Realtek sound card driver. I solved it by applying the hotfix provided MS.

  Now the problem is that the disk cleanup utility does not launch. Anyone any idea?

  I just found out that my disk cleanup utility would not work due to a free program called Photo Toolkit. Although it is a nice little program for quickly editing photos, apparently it causes such problems when it is loaded.

• I keep trying to run 2 updates that will not update. I get the error 646 with them. they are related to the KB976884 and KB976416. they are for Outlook and the pathfinder 2007. I'm not sure but I think they are for microsoft office 2007.

  Sorry if I'm repeating myself, but just trying to meet what is needed.  The only thing I have changed or done on my computer is run the defragmentation and tried to update each update separately but I am unable to get the updates for the update for Microsoft Office InfoPath 2007 (KB976416)

  Download size: 2.1 MB

  This update provides the latest fixes to Microsoft Office InfoPath 2007. Additionally, this update contains stability and performance improvements.

  More information:
  http://support.Microsoft.com/kb/976416

  and I am unable to get this update also: update for the junk e-mail in Microsoft Office Outlook 2007 (KB976884) filter

  Download size: 3.2 MB

  Update type: Important

  This update provides the filter of junk e-mail in Microsoft Office Outlook 2007 a more current definition of which e-mail messages should be considered junk e-mail.

  Hello

  Try this 1st to see if it helps, and it should:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  ------------------------------------------------------

  If necessary :

  Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
  or the update itself - double click a view more information (or click top then discovers on the right)

  Those who will take you to a page where you can download the update.

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------
  Because these are all Office updates you might get more information if necessary in the Agency of those groups that
  may have experienced the same problem.

  Office newsgroups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Microsoft.public.office.misc discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Several times after that I opened Google it does not connect to the internet. Has worked for a long time, and now it will not. Sometimes it opens if you "Refresh" sometimes not. Please help.

  Several times after that I opened Google it does not connect to the internet. Has worked for a long time, and now it will not. Sometimes it opens if you "Refresh" sometimes not.  Help, please. It has been stable over the years and now it will not work. I get no help when I diagnoise of problems, but I never. It has been checked and rechecked. PitStop does not even recognize a problem. I could change the homepage, but I prefer to use Google if it works. Frustrating.

  You may need to update your toolbar, google has made some changes just about everything and possibly that the page is not where it used to be.

• my laptop will not connect wireless

  my new hp laptop windows 8 will not connect to my wireless internet. It will be after I restart, but after a few minutes, it goes with limited access. How can I fix?

  Hello erobb14,

  We will try to remove your Wi - Fi card and let Windows to install it again. This will reset any options or configuration errors that may have been applied.

  Press and hold the Windows key and press W.
  In the search bar, type "Device Manager" (without the quotes) and press ENTER.

  Once inside the Device Manager, please find and unfold the group named "network adapters".
  From there, to identify your wireless card (it will very probably include the word "wireless" or "802.11".

  Now, right click on the wireless network device and click "Uninstall".
  If you're facing a check box asking if you want to remove the driver as well, please let it be empty.

  After the device has been uninstalled, restart your device and try to connect to the wireless again.

  I would like to know how that works for you.

• V525W printer will not connect wireless

  I just moved and had to change my ISP.  Now, my V525W printer which was working fine, will not connect wireless.

  When I try to reinstall the printer, the program stops after I connect the USB "put in place by cable".  The CONTINUE button dark rest.

  I tried every suggstion I find on the Board for more than three hours and still not get this piece of junk to work.

  I have an all-in-one Dell XPS running Windows 7 machine.

  Can someone please?

  Rick,

  After a few "cooling off" days, I decided to TANOE this problem again and it seems that I finally work!

  I went in the menu on the printer and restore the default settings.  I always had the same problem with the Installation of the Dell program I went into the Windows 7 Control Panel and clicked on "Add a wireless device to the network."  He immediately recognized the printer and I followed the steps until the light green enabled WiFi fixed.   Then, I went through the installation of Dell again and was able to print, scan, etc.

  Thanks again,

  Tom

• Get an error 'he cannot read the file' in Windows media player after the recent bios update

  * Original title: windows media player cannot play the files after the recent bios update

  I installed the latest update of the bios on my Hewlett Packard Windows 7 and now windows media player comes up with an error message saying that it cannot read the file for each file that he used to play.  Is it possible to uninstall and reinstall windows media player separately from windows?  or y at - it a file update or repair that I can download to make it work again.  I don't get a codec error.

  Hello

  1. What is the full error message?

  2. What is the number of KB of the update of the Bios?

  Please follow the steps below and get back to us with the results.

  Method 1: Open the troubleshooting Windows Media Player settings Troubleshooter

  http://Windows.Microsoft.com/is-is/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  Method 2: Uninstall and reinstall Windows Media Player.

  Step 1: Uninstall Windows Media Player.

  a. go to start and in the search type 'Turn Windows has or not'.
  b. click on "Turn Windows features on or off".
  c. find multimedia and uncheck the brand in the face of Windows Media Player.
  d. restart the computer

  Step 2: Reinstall Windows Media Player.

  a. go to start and in the search type 'Turn Windows has or not'.
  b. click on "Turn Windows features on or off".
  c. find the multimedia functions and place a check mark in front of Windows Media Player.
  d. restart the computer and check with the question.

  Turn on or off Windows features

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-features-on-or-off

  I would say that you can download the last packs of codec for Windows Media Player to the Internet and check out them. Make a search using your favorite search engine.

  Warning: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Let us know if it helps!

• HP Officejet 6500 a: printer will not connect to the wireless network.

  I got this HP printer for a while and it worked fine.  Our old router is out and we had to get a new one.  Installed perfectly and printer continued to work properly.  The password for the router was ridiculous, that's why I changed it to something much more simple to remember.  Since then, my printer will not connect to wireless internet.  I have a ~ and reinstalled the printer but still have the same problem.  I thought maybe to try the former password would, but who does not work either.

  Anyone has any ideas that might help before chuck it and go and get a new one altogether?

  Thank you.

  Easy things first.  Turn off the router and the printer.  Turn on the router and wait 3 minutes.  Turn on the printer and see if it connects to your router.  Status?

  If no joy, temporarily disable all security in the router.  Now try to connect the printer to your SSID not guaranteed without password.  Status now?

  If OK, go back and add WPA2-AES with your simple password.  Status now?