the property inspector does not

Similar Questions

• CC Dreamweaver property inspector does not

  Hi all

  I just started a new site, and after the installation of the text my PI remains empty. I can click on any part of the page and nothing shows upin the PI.

  the only time where the works of PI are when I place my cursor in front of the <>body.

  Never had this problem before.

  All of the suggestions.

  The position of your text is not valid. You must place your text in the body of your page.

  For now, you have it after and before departure

• Unexpected error in the property page. The VSS service uses the system restore does not work. Error (0 x 810000202). __

  original title: "there was an unexpected error in the property page. The VSS service uses the system restore does not work. For more information, see the journal of events (0 x 810000202). __

  "There was an unexpected error in the property page. The VSS service uses the system restore does not work. For more information see log of events (0 x 810000202).

  Please try the troubleshooting below to check the status of the shadow copy Volume service

  1. click on start > all programs > Accessories > run

  Type the following text in the run window, and then click ok:

  Services.msc

  You will get the Services window.

  2. Please check service Volume shadow copy service is "started" and "automatic".

  If these services are not set to "Started" and "Automatic", please, do a right-click on the service and select "Properties".
  On the window properties, please change the startup type to automatic, and use the Start button to start the service.

  Click on apply, click ok.

  Close the Services window

  Restart the computer and check if the problem occurs again.

  If the problem persists, start your computer in safe mode and try to do a restore of the system again. Temporarily disable your anti-virus protection

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  I hope this helps
  If this post can help solve your problem, please click the 'Mark as answer"If you find it useful, mark it as useful by clicking the 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Class not appearing CSS style is not in the property inspector

  Hello
  
  I'm building a new site in Dreamweaver 8 and started to format the text when entering new CSS Styles, but they may not appear in the property inspector. If I switch back to my other site, all right. Anyone encountered this?
  
  Thank you
  
  The head of Don Simpson

  Show us what you used to these new Styles CSS selectors? Only the class
  selectors will appear in the property inspector, since the type and ID
  the selectors are applied automatically.

  --
  Murray - ICQ 71997575
  Adobe Community Expert
  (If you * MUST * write me, don't don't LAUGH when you do!)
  ==================
  http://www.projectseven.com/go - DW FAQs, tutorials & resources
  http://www.dwfaq.com - DW FAQs, tutorials & resources
  ==================

  "Don Simpsons Head" wrote in message
  News:fuo0hr$N5$1@forums. Macromedia.com...
  > Hi,.
  >
  > I'm building a new site in Dreamweaver 8 and began to shape the
  > text
  > by entering new Styles CSS, but they may not appear in the property
  > Inspector. If I switch back to my other site, all right. A
  > someone running
  > in this?
  >
  > Thank you,
  >
  > The head of Don Simpson
  >

• text of the e-mail does not appear in hotmail or gmail in Firefox, but it does in internet explore

  A part of the text in e-mail from a particular sender does not at all appear in gmail or my hotmail in Firefox e-mail account. When I go to the same email using Internet Explorer, all the text is there. I tried the email viewing with disabled modules, and that did not fix the problem.

  Thanks for the message. The Inspector indicates that the message consists of a large number of tags nested inside of each other. (Screenshot attached)

  I don't see any purpose to have so many tags nested inside one another, because they are very repetitive, but many creation tools make no effort to write good HTML as long as it works in IE.

  The problem is that Firefox is not by not showing what it is rather than is not showing an image of plain text, as you saw when you paste into a word processing document. At least then you would know when something is missing. I don't know if/when that will be fixed, this is a known issue for some time.

  The redirect solution does not work on Gmail rich text/HTML mode, but if you switch to plain text mode, the list without style appears as a piece of text (screen attached). Not very useful, but it is there in a pinch.

  Sorry I don't have a good fix for the moment.

• Reset the default value does not

  'Reset to the default value' does not work for my ListBox multicolumn, but it works for my string flags.  Someone at - he never encountered this before?

  I tried to remove all the elements and setting "default value to', but after another execution of the program, still not reset to nothing.  I have to do it programmatically in my code, and I can't do using the server reference VI Reset at the same time.  I have to define arrays of strings individually to null.

  I use a large number of nodes of property in my loop of consumer to read/write the values in the front panel.  Not sure if this is related.

  Thank you.

  This occurs because the value of a multicolumn listbox is a digital scalar or table (depending on the selection mode of the control) Express which line or the currently selected cell.

  "Reset to default" only resets the values and no other properties. In this case, it is the property of ref that hosts that we consider intuitively the value of listbox mc, but it's not.

• IPM. The weblogic user does not exist in the policy store

  We cannot connect to the MPI with the error: the weblogic user does not exist in the policy store.

  I updated COE field to add the Capture and Imaging.

  We have 11.1.1.8 patched with more late installed environment

  Related to the AD and SSO configured (kerberos)

  Providers are:

  SSO - provider WebLogic negotiate identity Assertion

  OrangeAD - provider that performs LDAP authentication

  DefaultAuthenticator - WebLogic authentication provider

  DefaultIdentityAsserter - provider of assertion of identity WebLogic

  Control for OrangeAD and DefaultAuthenticator flag is SUFFICIENT

  There is no problem with Capture (include SSO)

  Refreshment of the IPM security not solved the problem

  In the discussion that I found said that weblogic user must be added to the provider (AD in my case):

  https://community.Oracle.com/thread/2615536

  Should I do this?

  Is that it can be cause of problems for rest UCM, Capture, Admin servers?

  Thank you

  Leon

  Let me explain here:

  The link that you pointed out only responds by me

  Connection IPM problems

  By default, the WebCenter JpsProvider calls / user role API to retrieve a list of roles that a user is a member. API/user role Gets a list of roles from the leading provider of authentication and ignores other authentication providers.

  The Weblogic jps can be configured so that the user/role API goes against all configured authentication providers. This by adding a property, virtualize and it's true

  From the Enterprise Manager domain

  1. in a browser, go to the page of Weblogic Enterprise Manager

  The URL will usually be something like: http://YourDomainSystem:7001 / em

  2 expand Weblogic domain

  3 right-click the field, and then select security--> security provider Configuration

  4. click on the box to extend the identity store provider.

  5. click on the button set up

  6. in the custom properties, click the Add button.

  7. in the name of property filed enter: virtualize

  8. in the value field, enter: true

  9. click on the OK button

  10 restart the Weblogic Admin Server and the server managed by WCC

  Please find below the Agency's response all risks

  http://www.Ateam-Oracle.com/WebCenter-content-imaging-and-multiple-identity-providers-the-virtualization-issue/

  Thank you

  Ranjan

• Table 'dbc_user' in the descriptor of the item: 'user' does not exist in a space of accessible table by the data source.

  In my development environment, when I run the production server, I get the following error in the server.log. I have configured the data source for the production. I use ATG 10.1. Please help solve this problem. Here are the logs

  22:46:45, 765 full repository INFO [ProfileAdapterRepository] SQL boot

  22:46:45, 988 full repository INFO [AdminSqlRepository] SQL boot

  22:46:45, 990 Initializing INFO [AdminAccountInitializer] account database/atg/dynamo/security/AdminAccountManager of/atg/dynamo/security/SimpleXmlUserAuthority

  22:46:46, 450 ERROR [ProfileAdapterRepository] Table 'dbc_user' in the descriptor of the item: 'user' does not exist in a space of accessible table by the data source.  DatabaseMetaData.getColumns returns without columns.  Catalog = null Schema = null

  22:46:46, 466 WARN [ProfileAdapterRepository] atg.adapter.gsa.GSARepository-> loadColumnInfo: SQLException in Table.loadColumnInfo.  Try again.

  com MySQL.JDBC.exceptions.jdbc4.MySQLSyntaxErrorException: Table 'atgcoredb.dbc_user' does not exist

  at sun.reflect.NativeConstructorAccessorImpl.newInstance0 (Native Method)

  at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:57)

  at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:45)

  at java.lang.reflect.Constructor.newInstance(Constructor.java:525)

  at com.mysql.jdbc.Util.handleNewInstance(Util.java:407)

  at com.mysql.jdbc.Util.getInstance(Util.java:382)

  at com.mysql.jdbc.SQLError.createSQLException(SQLError.java:1052)

  at com.mysql.jdbc.MysqlIO.checkErrorPacket(MysqlIO.java:3603)

  at com.mysql.jdbc.MysqlIO.checkErrorPacket(MysqlIO.java:3535)

  at com.mysql.jdbc.MysqlIO.sendCommand(MysqlIO.java:1989)

  at com.mysql.jdbc.MysqlIO.sqlQueryDirect(MysqlIO.java:2150)

  at com.mysql.jdbc.ConnectionImpl.execSQL(ConnectionImpl.java:2620)

  at com.mysql.jdbc.ConnectionImpl.execSQL(ConnectionImpl.java:2570)

  at com.mysql.jdbc.StatementImpl.executeQuery(StatementImpl.java:1476)

  to com.mysql.jdbc.DatabaseMetaData$ 7.forEach(DatabaseMetaData.java:3966)

  at com.mysql.jdbc.IterateBlock.doForAll(IterateBlock.java:51)

  at com.mysql.jdbc.DatabaseMetaData.getPrimaryKeys(DatabaseMetaData.java:3950)

  at atg.adapter.gsa.Table.loadColumnInfo(Table.java:1926)

  at atg.adapter.gsa.GSARepository.loadColumnInfos(GSARepository.java:7534)

  to atg.adapter.gsa.GSARepository$ 1.run(GSARepository.java:5431)

  at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1110)

  to java.util.concurrent.ThreadPoolExecutor$ Worker.run (ThreadPoolExecutor.java:603)

  at java.lang.Thread.run(Thread.java:722)

  22:46:46, 467 WARN [ProfileAdapterRepository] unknown JDBC type for property: businessAddress, element type: user. Make sure that the column names in the database and match model.  The business_addr column is not found in the set of columns returned by the database: {} for this table.

  22:46:46, 470 ERROR [ProfileAdapterRepository] Table 'dbc_buyer_billing' in the descriptor of the item: 'user' does not exist in a space of accessible table by the data source.  DatabaseMetaData.getColumns returns without columns.  Catalog = null Schema = null

  22:46:46, 470 WARN [ProfileAdapterRepository] atg.adapter.gsa.GSARepository-> loadColumnInfo: SQLException in Table.loadColumnInfo.  Try again.

  com MySQL.JDBC.exceptions.jdbc4.MySQLSyntaxErrorException: Table 'atgcoredb.dbc_buyer_billing' does not exist

  at sun.reflect.NativeConstructorAccessorImpl.newInstance0 (Native Method)

  at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:57)

  at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:45)

  at java.lang.reflect.Constructor.newInstance(Constructor.java:525)

  at com.mysql.jdbc.Util.handleNewInstance(Util.java:407)

  at com.mysql.jdbc.Util.getInstance(Util.java:382)

  at com.mysql.jdbc.SQLError.createSQLException(SQLError.java:1052)

  at com.mysql.jdbc.MysqlIO.checkErrorPacket(MysqlIO.java:3603)

  at com.mysql.jdbc.MysqlIO.checkErrorPacket(MysqlIO.java:3535)

  at com.mysql.jdbc.MysqlIO.sendCommand(MysqlIO.java:1989)

  at com.mysql.jdbc.MysqlIO.sqlQueryDirect(MysqlIO.java:2150)

  at com.mysql.jdbc.ConnectionImpl.execSQL(ConnectionImpl.java:2620)

  at com.mysql.jdbc.ConnectionImpl.execSQL(ConnectionImpl.java:2570)

  at com.mysql.jdbc.StatementImpl.executeQuery(StatementImpl.java:1476)

  to com.mysql.jdbc.DatabaseMetaData$ 7.forEach(DatabaseMetaData.java:3966)

  at com.mysql.jdbc.IterateBlock.doForAll(IterateBlock.java:51)

  at com.mysql.jdbc.DatabaseMetaData.getPrimaryKeys(DatabaseMetaData.java:3950)

  at atg.adapter.gsa.Table.loadColumnInfo(Table.java:1926)

  at atg.adapter.gsa.GSARepository.loadColumnInfos(GSARepository.java:7534)

  to atg.adapter.gsa.GSARepository$ 1.run(GSARepository.java:5431)

  at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1110)

  to java.util.concurrent.ThreadPoolExecutor$ Worker.run (ThreadPoolExecutor.java:603)

  at java.lang.Thread.run(Thread.java:722)

  22:46:46, 471 WARN [ProfileAdapterRepository] unknown JDBC type for the property: myBillingAddrs, element type: user. Make sure that the column names in the database and match model.  The addr_id column is not found in the set of columns returned by the database: {} for this table.

  22:46:46, ERROR 611 [ProfileAdapterRepository] Table 'dbc_org_billing' in the descriptor of the item: "organization" does not exist in a space of accessible table by the data source.  DatabaseMetaData.getColumns returns without columns.  Catalog = null Schema = null

  22:46:46, 611 WARN [ProfileAdapterRepository] atg.adapter.gsa.GSARepository-> loadColumnInfo: SQLException in Table.loadColumnInfo.  Try again.

  com MySQL.JDBC.exceptions.jdbc4.MySQLSyntaxErrorException: Table 'atgcoredb.dbc_org_billing' does not exist

  at sun.reflect.NativeConstructorAccessorImpl.newInstance0 (Native Method)

  at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:57)

  at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:45)

  at java.lang.reflect.Constructor.newInstance(Constructor.java:525)

  at com.mysql.jdbc.Util.handleNewInstance(Util.java:407)

  at com.mysql.jdbc.Util.getInstance(Util.java:382)

  at com.mysql.jdbc.SQLError.createSQLException(SQLError.java:1052)

  at com.mysql.jdbc.MysqlIO.checkErrorPacket(MysqlIO.java:3603)

  at com.mysql.jdbc.MysqlIO.checkErrorPacket(MysqlIO.java:3535)

  at com.mysql.jdbc.MysqlIO.sendCommand(MysqlIO.java:1989)

  at com.mysql.jdbc.MysqlIO.sqlQueryDirect(MysqlIO.java:2150)

  at com.mysql.jdbc.ConnectionImpl.execSQL(ConnectionImpl.java:2620)

  at com.mysql.jdbc.ConnectionImpl.execSQL(ConnectionImpl.java:2570)

  at com.mysql.jdbc.StatementImpl.executeQuery(StatementImpl.java:1476)

  to com.mysql.jdbc.DatabaseMetaData$ 7.forEach(DatabaseMetaData.java:3966)

  at com.mysql.jdbc.IterateBlock.doForAll(IterateBlock.java:51)

  at com.mysql.jdbc.DatabaseMetaData.getPrimaryKeys(DatabaseMetaData.java:3950)

  at atg.adapter.gsa.Table.loadColumnInfo(Table.java:1926)

  at atg.adapter.gsa.GSARepository.loadColumnInfos(GSARepository.java:7534)

  to atg.adapter.gsa.GSARepository$ 1.run(GSARepository.java:5431)

  at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1110)

  to java.util.concurrent.ThreadPoolExecutor$ Worker.run (ThreadPoolExecutor.java:603)

  at java.lang.Thread.run(Thread.java:722)

  22:46:46, 612 WARN [ProfileAdapterRepository] unknown JDBC type for the property: myBillingAddrs, element type: Organization. Make sure that the column names in the database and match model.  The addr_id column is not found in the set of columns returned by the database: {} for this table.

  You want to run the B2BCommerce module? If so, then you must run the $dynamo_home /... / B2BCommerce/SQL/db_components/MySQL/b2b_user_ddl. SQL ddl because you are missing the B2BCommerce tables. If this isn't the case, you will have to redo without the B2BCommerce module.

  Thank you

  Joe

• How do you get space V and H space appear in the property inspector.

  I use Dreamweaver CS6 and I can't align it, space V, H space appear in the property inspector when editing photos.  Anyone have any suggestions. ?

  Yes.  Use CSS.  Alignment, vertical space, and horizontal space are not valid in modern HTML.  Adobe them removed from the properties panel.

  Nancy O.

• the invocation service does not start automatically

  Hi, I set up call service starts automatically as below, however, it has not worked. And I need application code to get the service from CacheFactory.getService ("MyInvocationService") to start it... why it is so? Thank you.
  
  Henry
  
  < invocation-plan >
  < scheme name > example-invocation < / system-name >
  < service name > MyInvocationService < / service-name >
  < number > 10 threads < / thread count >
  < system-property autostart = "tangosol.coherence.invocation.autostart" > true < / autostart >
  < / invocation-plan >

  922963 wrote:
  Hi Robert,.

  Thank you. Yes, I have my own main class. In order to take advantage of the beginning and the monitor etc, already provided by DefaultCacheServer, my hand class should DefaultCacheServer? or a better way to do it?

  Henry

  Hi Henry,.

  Simply call DefaultCacheServer.start () which starts the services (but does not start the thread of analysis that restarts the services of consistency if the node was chased from the cluster automatically).

  If you want the thread of analysis, too, then, in my opinion, you can call DefaultCacheServer.startDaemon ().

  Stop the services and the thread of analysis is DefaultCacheServer.shutdown ().

  Best regards

  Robert

• InputText DataBound is showing the value but does not display inputtext contour

  Hello everyone,
  
  I am facing a problem when working with Oracle ADF. Here's the usecase for this problem.
  
  1 > I have created a simple bpel webservice that returns data from database
  2 > then created the datacontrol therefor in my adf application
  3 > once I dragged and spent attributes return webservice as "FirstName" and "LastName", etc on a page like jsff datacontrol
  inputText.Removed xml links unnecessary and kept as simple as:
  
  < af:inputText value = "#{bindings." FirstName.inputValue}"id ="it1.
  label = "name *" >
  But the problem is when I run the application, the Web service is called, also return values, but the inputText contour is not there. The values will appear as an outputText.
  
  I have this connection, I should mention that I'm using Windows XP 2002 professional version SP3 and JDeveloper is 11.1.1.3.0.
  
  I tried many things but could not obtain the success.
  
  Any solution to this problem will be highly appreciated. Thanks in advance.
  
  Please let me know in the case of any information on this.
  
  Kind regards
  Ayan

  Hello

  This is because Web Services are not editable, but rather ask you to explicitly call a method. To change this behavior, in the data control panel, select the node of the collection that contains the attributes that you have created the form of. Us ethe mouse right button and choose "EditDefinition. Select attributes and open the property inspector. In the property inspector, find "isUpdateable" and assign the value true to the attribute.

  Save the changes and update the Panel (refresh icon) DataControl. The entry field makes now editable

  Frank

• How can I display the properties in the standard view of the property inspector?

  Hello

  right now, I'm looking in the development of custom Flex components and skins.

  I've heard that the public and property fields are displayed automatically in the property inspector in Flash Builder.

  However, I can't get them to appear in the display of the categories.

  

  What should I do to display in Classic view?

  For each component of standard candle, there are different properties displayed in the standard display,

  so there must be a place where it is defined?

  

  And, so far I did not completely display style properties in Flash Builder, in standard or in category view.

  Can you give me any advice on these topics?

  You can consider the following blog useful:

  http://www.igorcosta.org/?p=186

  http://www.Morearty.com/blog/2008/11/19/extending-Flex-Builder-sample-code-for-designxml/

• &amp; quot; / &amp; quot; in front of link in the property inspector

  Hi-I'm having a problem and cannot figure out how to solve.
  Whenever I use the function 'point to the file"in the property inspector to create a link in the Source box or the link, DW (MX2004) automatically place one box" / "-forward slash-front link, forcing me to remove them manually to unlock the link. Is this a setting hidden somewhere I have not looked at?
  Thank you

  I'll answer my own question - the answer here is for anyone interested:
  Instead of root choose relative doc in the drop-down list box.

• the preview window does not show the document that I'm about to print in Sierra

  The preview window does not display the document that I'm about to print. This problem started as soon as I upgraded to Sierra. It occurs in many applications - including in Microsoft Excel 2011.

  

  

  Hello, David Bry1,.

  Thank you for using communities of Apple Support.

  I understand that when you try to print from a number of different applications, you do not see the preview of the document you are printing. I would like to assure you that I see the preview as well when I print. Let's see how we can get this resolved.

  I advise you to ensure that the printer software is up-to-date on your printer Brother DCP-7065DN. Please choose 'Available Software' brother printer and scanner software for macOS Sierra, El Capitan, Yosemite, and Mavericks

  If a software update is available, please install and then test and see if you get the same result.

  Have an amazing day!

• As I installed the latest OS 10.0.1 on my iPhone, the Pandora app does not work.

  As I installed the latest OS 10.0.1 on my iPhone, the Pandora app does not work.

  Have you installed the latest update of Pandora (version 7.6), posted on September 13, 2016?