The question of client and Clientless operations order

Similar Questions

• How do I configure the iPad2 to synchronize the iPad-Mailclient with Exchange 2010 via Active Sync using the certificate SSL client and name of user and password?

  Active Sync iPad ssl Client certificate

  How do I configure the iPad2 to synchronize the iPad-Mailclient with Exchange 2010 via Active Sync using the certificate SSL client and name of user and password?

  Hi Ewoki,

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the TechNet Exchange forum. Please post your question in the Forums TechNet in Exchange Server.

• I cannot locate the serial number of the question, I bought and have trouble to install on my computer

  I cannot locate the serial number of the question, I bought and have trouble to install on my computer

  Quickly find your serial number

  If you purchased a boxed version, there is a box in a box where the serial number.

• Have problems with the IPSec VPN Client and several target networks

  I use an ASA 5520 8.2 (4) running.

  My goal is to get a VPN client to access more than one network within the network, for example, I need VPN client IPSec and power establish tcp connections on servers to 192.168.210.x and 10.21.9.x and 10.21.3.x

  I think I'm close to having this resolved, but seems to have a routing problem. Which I think is relevant include:

  Net1: 192.168.210.0/32

  NET2: 10.21.0.0/16

  NET2 has several subnets defined VIRTUAL local network:

  DeviceManagement (vlan91): 10.21.9.0/32

  Servers (vlan31): 10.21.3.0/32

  # See the road

  Code: C - connected, S - static, RIP, M - mobile - IGRP, R - I, B - BGP

  D - EIGRP, OSPF, IA - external EIGRP, O - EX - OSPF inter zone

  N1 - type external OSPF NSSA 1, N2 - type external OSPF NSSA 2

  E1 - OSPF external type 1, E2 - external OSPF of type 2, E - EGP

  i - IS - L1 - IS - IS level 1, L2 - IS - IS IS level 2, AI - IS inter zone

  * - candidate by default, U - static route by user, o - ODR

  P periodical downloaded static route

  Gateway of last resort is x.x.x.x network 0.0.0.0

  C 192.168.210.0 255.255.255.0 is directly connected to the inside

  C 216.185.85.92 255.255.255.252 is directly connected to the outside of the

  C 10.21.9.0 255.255.255.0 is directly connected, DeviceManagement

  C 10.21.3.0 255.255.255.0 is directly connected, servers

  S * 0.0.0.0 0.0.0.0 [1/0] via x.x.x.x, outdoor

  I can communicate freely between all networks from the inside.

  interface GigabitEthernet0/0

  Description * INTERNAL NETWORK *.

  Speed 1000

  full duplex

  nameif inside

  security-level 100

  IP 192.168.210.1 255.255.255.0

  OSPF hello-interval 2

  OSPF dead-interval 7

  !

  interface Redundant1.31

  VLAN 31

  nameif servers

  security-level 100

  IP 10.21.3.1 255.255.255.0

  !

  interface Redundant1.91

  VLAN 91

  nameif DeviceManagement

  security-level 100

  IP 10.21.9.1 255.255.255.0

  permit same-security-traffic inter-interface

  NO_NAT list of allowed ip extended access all 172.31.255.0 255.255.255.0

  IP local pool vpnpool 172.31.255.1 - 172.31.255.254 mask 255.255.255.0

  Overall 101 (external) interface

  NAT (inside) 0-list of access NO_NAT

  NAT (inside) 101 192.168.210.0 255.255.255.0

  NAT (servers) 101 10.21.3.0 255.255.255.0

  NAT (DeviceManagement) 101 10.21.9.0 255.255.255.0

  static (inside, DeviceManagement) 192.168.210.0 192.168.210.0 netmask 255.255.255.0

  static (inside, servers) 192.168.210.0 192.168.210.0 netmask 255.255.255.0

  static (servers, upside down) 10.21.3.0 10.21.3.0 netmask 255.255.255.0

  static (DeviceManagement, upside down) 10.21.9.0 10.21.9.0 netmask 255.255.255.0

  access list IN LAN extended permitted tcp 192.168.210.0 255.255.255.0 any

  access list IN LAN extended permit udp 192.168.210.0 255.255.255.0 any

  LAN-IN scope ip 192.168.210.0 access list allow 255.255.255.0 any

  LAN-IN extended access list allow icmp 192.168.210.0 255.255.255.0 any

  access list IN LAN extended permitted tcp 10.21.0.0 255.255.0.0 any

  access list IN LAN extended permitted udp 10.21.0.0 255.255.0.0 any

  LAN-IN scope 10.21.0.0 ip access list allow 255.255.0.0 any

  LAN-IN extended access list allow icmp 10.21.0.0 255.255.0.0 any

  standard access list permits 192.168.210.0 SPLIT-TUNNEL 255.255.255.0

  standard access list permits 10.21.0.0 SPLIT-TUNNEL 255.255.0.0

  group-access LAN-IN in the interface inside

  internal VPNUSERS group policy

  attributes of the VPNUSERS group policy

  value of server DNS 216.185.64.6

  Protocol-tunnel-VPN IPSec

  Split-tunnel-policy tunnelspecified

  Split-tunnel-network-list value of SPLIT TUNNEL

  field default value internal - Network.com

  type VPNUSERS tunnel-group remote access

  tunnel-group VPNUSERS General attributes

  address vpnpool pool

  strategy-group-by default VPNUSERS

  tunnel-group VPNUSERS ipsec-attributes

  pre-shared key *.

  When a user establishes a VPN connection, their local routing tables have routes through the tunnel to the 10.21.0.0/16 and the 192.168.210.0/32.

  They are only able to communicate with the network 192.168.210.0/32, however.

  I tried to add the following, but it does not help:

  router ospf 1000

  router ID - 192.168.210.1

  Network 10.21.0.0 255.255.0.0 area 1

  network 192.168.210.0 255.255.255.252 area 0

  area 1

  Can anyone help me please with this problem? There could be a bunch of superfluous things here, and if you could show me, too, I'd be very happy. If you need more information on the config, I'll be happy to provide.

  Hello Kenneth,

  Based on the appliance's routing table, I can see the following

  C 10.21.9.0 255.255.255.0 is directly connected, DeviceManagement

  C 10.21.3.0 255.255.255.0 is directly connected, servers

  C 192.168.210.0 255.255.255.0 is directly connected to the inside

  And you try to connect to the 3 of them.

  Politics of Split tunnel is very good, the VPN configuration is fine

  The problem is here

  NO_NAT list of allowed ip extended access all 172.31.255.0 255.255.255.0

  NAT (inside) 0-list of access NO_NAT

  Dude, you point to just inside interface and 2 other subnets are on the device management interface and the interface of servers... That is the question

  Now how to solve

  NO_NAT ip 192.168.210.0 access list allow 255.255.255.0 172.31.255.0 255.255.255.0

  no access list NO_NAT extended permits all ip 172.31.255.0 255.255.255.0

  NO_NAT_SERVERS ip 10.21.3.0 access list allow 255.255.255.0 172.31.255.0 255.255.255.0

  NAT (SERVERS) 0 ACCESS-LIST NO_NAT_SERVERS

  Permit access-list no.-NAT_DEVICEMANAGMENT ip 10.21.9.0 255.255.255.0 172.31.255.0 255.255.255.0

  NAT (deviceManagment) 0-no.-NAT_DEVICEMANAGMENT access list

  Any other questions... Sure... Be sure to note all my answers.

  Julio

• BlackBerry Smartphones Forget the question of password and security for Blackberry Id

  I try to use my Blackberry Id and I realize that I forgot my password question and security.

  I can't find a solution, I have to do?

  Read this to get instructions to reset your password BlackBerryID:

  KB26361 How to reset a BlackBerry ID password

  *****
  It must be remembered the BlackBerryID password or secret answer to the question. Without either, you're stuck.
  Your choice is:
  -Use a different e-mail account to create a new BlackBerryID (with which you will lose access to all apps purchased using the 'forgotten' first BlackBerryID, or)
  -Find the initial email you have been sent to confirm the initial BlackBerryID and there are a link to click to cancel and delete the account. Click on this, delete the account and then you can use that same e-mail to create a new account.
  Good luck.

• Install PeopleTools 8,53 Linux question: Windows Client and server Linux

  People,

  
  Hello. I install PeopleTools 8,53 Internet Architecture. Database server is Dabase Oracle 11 GR 1 material. Operating system is Oracle Linux 5. I installed successfully JDK7, WebLogic Tuxedo 11 GR 1 material and PeopleTools 8,53 10.3.6, in Oracle Linux 5.

  
  Now, I'm going to implement database PeopleTools8.53. Because the Wizard installation problem, I created PeopleTools 8,53 database manually using Starter named PT853 Oracle database instance. We need run Data Mover script in a Windows Client computer to populate the PeopleSoft database instance in Linux Sever machine.

  Suppose that:

  VM1: Server - Oracle Linux 5 Machine
  VM2: Client - Windows XP

  Nicolas has this tutorial:

  http://Gasparotto.blogspot.com/2008/01/on-PeopleSoft-road-PeopleSoft-database_10.html

  Step 15 to step 23, Nicolas does not explain how to connect VM2 (client) with VM1 (server) and load some data from to VM1 VM2.

  My questions are:

  First of all, we need to install PeopleTools 8.53 Windows version on the Client Windows XP when installing PeopleTools 8,53 Linux version on the machine Oracle Linux 5 Server?

  Second, how to connect with VM1 VM2, and then load to VM1 VM2 data?

  
  Thank you.

  My computer's processor 64-bit, so 32-bit install PeopleTools or Oracle database server, there must be some mistakes!

  No errors. 32 applications and processes will be running on 64-bit Windows. PeopleTools client programs (PSIDE, etc.) require the Oracle 32-bit client

  What are the 'Oracle customer' in Windows machine?

  'Oracle customer' is the "connectedness agenda" used by Oracle to connect to the Oracle database.

  You mean besides install PeopleTools 8.53 in the Windows client computer, still need to install the Oracle database server in Windows client machine?

  No, not the database server Oracle, just the Oracle client. You can download it separately from delivery for your client operating system.

• The remote VPN Clients and Internet access

  I apologize in advance if this question has already been addressed. I am currently using a PIX Firewall Version 6.1 520 (2) running. I have several remote users that VPN for the PIX. Once the VPN tunnel is started, they are more able to connect to internet from their local computers. Is there a configuation on the PIX that allows remote users to have access to the internet when you are connected to the PIX.

  TIA,

  Jeff Gulick

  The Pix does not allow traffic enter and exit on the same interface. Therefore, a VPN user cannot access the Internet through the tunnel. If you use the Cisco client, enable tunneling split so that all traffic through the tunnel.

  If you use PPTP, you can turn off the option that makes the remote network, the default gateway. However, local routes should be added to these clients when they connect.

  Or you can use an additional interface on the firewall. One that puts an end to VPN tunnels and another providing for Internet connectivity. In this way the traffic is not enter/leave on the same interface.

  Of course, it is preferable if the customer Internet traffic does not go through the tunnel. It wastes your bandwidth and has security problems as well. I suggest you use the client to Cisco and the split tunneling.

• Install PeopleTools 8,53 Linux question: Windows Client and Linux Server suite

  People,

  Hello. I install PeopleTools 8,53 Internet Architecture. Database server is Dabase Oracle 11 GR 1 material. Operating system is Oracle Linux 5. I installed successfully JDK7, WebLogic Tuxedo 11 GR 1 material and PeopleTools 8,53 10.3.6, in Oracle Linux 5.

  I've been setting up of database PeopleTools8.53. Because the Wizard installation problem, I created PeopleTools 8,53 database manually using Starter named PT853 Oracle database instance. I have run the following scripts:
  (1) utlspace.sql
  (2) dbowner.sql
  (3) ptddl.sql
  (4) psadmin.sql
  (5) psroles.sql
  (6) connect.sql

  Then, we perform Data Mover script in a Windows Client computer to fill the PeopleTools PT853 database machine Linux Sever instance.
  I have installed Oracle Database 11 g 2 client for 32-bit Windows in my Windows XP 64-bit. The installed directories are below:

  Server Linux machine:
  Oracle_Home: / home/user/OracleDB_Home
  ORACLE_BASE: / home/user/OracleDB_Base
  PeopleTools 8.53: /Linux/PT8.53

  Windows XP Client computer:
  Oracle_Client: /OracleDB_Client_Install_Directory
  PeopleTools 8.53: /Windows/PT8.53

  
  What machine installed PeopleTools 8.53 in customer Windows, it is a step:

  Select the location of the connectivity program directory:

  What directory to select? We select the directory ' / home/user/OracleDB_Home "on Linux?
  Oracle Client tools in Windows XP "Start" menu is used to connect Windows XP with Linux?

  Thank you.

  The answer is «Yes, they use the tools of the Oracle Client installed on Windows XP.» The longer answer is that these client tools communicate with the Linux using TCP/IP database, etc., and exclusive Oracle TNS 'protocol '. This network communication usually occurs on port 1521, but you can configure your server to database for listening on different ports. Alternatively, you can do all kinds of fun things with forwarding port, tunnels, VPNs, etc. for the use of different ports and security protocols. There is much more than that, but basically these Oracle client tools provide utilities communication (drivers) used by PeopleSoft to connect to the database on Linux via the network.

• Need to re - format the hard drive of the constant problems marketing and stay operating in car

  Product: HP Pavilion Media Center M8200n

  Product # GN551AA #ABA

  Serial No. [edited personal product info]

  Operating system: XP upgraded to Windows 7

  Several months ago, I started getting blue screens and freezes and then start at the beginning, etc.. I finally got in a single day and immediately backed up everything on my remote hard drive. I think it would be better to re - format the hard drive and start over. Something keeps sending me blue screens and freeze me. Please help... an elderly person who is not completely computer illiterate, but not so tech savvy!

  W. b. Smith

  CONGRATULATIONS TO DAVE860... ALL THIS IS THANKS TO YOU!

  I remember you said something about Norton does not fully with upgrades. So I removed Norton System and replaced with Security Essentials and all worked fine for 4 weeks now underway.

  Your help so greatly appreciated. Ironically, according to my friends, they have been seen ice problems and I told her about Norton and upgrade system I have. Seems that they had upgraded from Vista to XP. They have deleted Norton and installed another security system and all is well.

  New big giant Bravo to you, Dave.

  Thank you.

• I forgot the questions of security and rescue by email.

  I tried to change my password iCloud, but they asked security questions. Honestly, I have it created a long time ago, how I could remember it. And then they ask for emergency e-mail, they gave me "t•••@yahoo.com", I have no email like that. How to change my password iCloud?

  You must ask security team account Apple to reset your security questions. To contact them, click here and choose a method; If this page does not list one for your country or if you are unable to call, complete and submit this form.

  (142384)

• The question posed, signed and cannot find an answer... all made a mouse need a battery?

  My mouse acts erratically, the Red below going market and sticks to the mouse.  Need a battery?  I can't find anything on the desktop link for "manual."

  If it's a wireless mouse - get a new battery and replace it and whether that suits him.

• Profile of user configuration / synchronize the profile between client and Server version

  We customize our domain (Windows 2008 R2). The domain user should have an opportunity to work as a local user and domain user. Profiles should be synchronized every time if the user is in the intranet. We have the following goals

  1 setting up a user profile to domain (Server version) for Windows XP, Vista and Windows 7

  2 coordinate the profiles of local with domain profiles

  Thank you very much for your support.

  HELMAT Amin

  You won't find many people who know the servers in a Windows Vista newsgroup. Best to find one of the newsgroups server TechNet or MSDN and after this kind of issue areas here.

  'helmat' wrote in the new message: * e-mail address is removed from the privacy... *

  We customize our domain (Windows 2008 R2). The domain user should have an opportunity to work as a local user and domain user. Profiles should be synchronized every time if the user is in the intranet. We have the following goals

  1 setting up a user profile to domain (Server version) for Windows XP, Vista and Windows 7

  2 coordinate the profiles of local with domain profiles
  Thank you very much for your support.

  HELMAT Amin

• SQLcl throws the Exception on start and stop operating within the scheduled task

  I'm on Windows Server 2012 R2 runs a script TakeCommand (jpsoft.com) as a task scheduled using SQLcl - 4.2.0.15.177.0246.

  The script is invoked, when the account (with administrative privileges) who runs the scheduled task is not connected to the machine.

  The scenario is as follows:

  • servers both windows ServerA and ServerB (virtual servers)
  • ServerA has a SAN connected directly (as E drive)
  • ServerB remotely accesses drive E on ServerA and maps in drive E (guest ServerB cmd > net use e: \\ServerA\e)
  • the problem occurs on server b.

  Corr 04/09/2015: the SAN is not the cause of the errors/exceptions - it's just that the user who runs the scheduled task is not logged on and therefore has no APPDATA

  When SQLcl is called, the following lines are recorded... (italics: private information, "BOLD": SQLcl output not visible when the user connects while work is carried out at the request)

  03/09/2015 12:16:41.979 to connect to the jdbc URL ... (this output is to the batch calling SQLcl - everything below is SQLcl or SQL script)

  Sep 03, oracle.dbtools.raptor.console.MultiLineHistory load 2015 12:18:05

  SEVERE: HIST-013 APPDATA is null

  Sep 03, oracle.dbtools.raptor.newscriptrunner.commands.net.NetEntries load 2015 12:18:55

  SEVERE: NET-013 APPDATA is null

  Sep 03, 2015 12:18:55 oracle.dbtools.raptor.newscriptrunner.commands.net.NetEntries save

  SEVERE: NET-013 APPDATA is null

  03.09.2015 12:18:56: updated information on what will be done

  0 lines merged.

  0 lines merged.

  03.09.2015 12:19:15: updated information on what will be done
  

  0 lines merged.

  Exception in thread "cleansing" java.lang.NullPointerException

  in java.io.File. < init > (File.java:277)

  at oracle.dbtools.raptor.newscriptrunner.commands.alias.Aliases.save(Aliases.java:132)

  at oracle.dbtools.raptor.newscriptrunner.commands.alias.Aliases.save(Aliases.java:128)

  to oracle.dbtools.raptor.scriptrunner.cmdline.SqlCli$ 1.run(SqlCli.java:356)

  In addition, that everything works fine... the script is executed as planned, as expected, the queued files are created...

  So what I am doing wrong?

  Best regards, Peter

  Message geändert durch stueckl - information server added

  Message geändert durch stueckl - information server deleted - it's a general problem

  If we were talking about developer SQL itself rather than SQLcl, then the solution is simple... you can always force your user settings to a folder accessible in arbitrary writing using the ide.user.dir environment variable just add something like this line to the file sqldeveloper.conf to your installation:

  AddVMOption - Dide.user.dir =

  SQLcl, however, is hard-coded dependency on APPDATA in Windows (and user.home on Linux).  May not be feasible in your case, but in some cases simple, APPDATA can be overridden in the script that launches the SQLcl and the NetEntries and xml SQL history files are read from / written to this file.

  For example: value APPDATA = C:\Temp

• The questions "By clicking and dragging" during the recording of training simulations

  I am trying to record a training simulation in which I want the user to be able to click (to select an object) and drag it out into the workspace of the application (all in a single movement). While the app saves me ok, performing the action when it comes to testing the finished result the user cannot imitate this gesture as the simulation just goes ahead and does it for them. This action and drag is fundamental for our software, the user must be able to do themselves. Sorry, I hope this makes sense - of help is welcome.

  I don't know if this will be useful for your purpose, but worth a try. Here are some tips: advice & glide - Captivate blog

• Install old HDD to the pc with the new HARD drive and operating system different?

  Hi, I recently ripped my old laptop that no longer works, after buying a newer laptop 4 years ago. The new laptop has Windows 7 Ultimate 64 bit installed while the old machine had Windows Vista installed. I want to put the old HDD in my new machine to extract some files that I want to keep and possibly use this particular drive as a disc of extra storage without having to turn it into a portable device. Would that work or would I meet problems with him? It would be just a plug & play this sort of thing (as the old HDD already has an operating system installed) or the old drive (vista) would cause the new drive (win7) fails at startup?

  And sorry if this has already been covered. I searched through the questions asked previously and has not really found a similar job.

  You can use your old drive, but you should check that the "Boot order" is the most recent Player listed before the old drive. If need be exit and save your BIOS boot becomes.

  Next

  After you have started since the new drive, you may need to take ownership of the files you need to copy.

  To take ownership of a file or folder

  1. open Windows Explorer and locate the file or folder you want to take charge.
  2. right click on the file or folder, click Properties, and then click the Security tab.
  3. click on advanced and then click the owner tab.
  4. click on edit and then do one of the following:
  To change the owner to a user or group that is not listed, click other users and groups and enter the object name to select (examples), type the name of the user or group and then click OK.

  To change the owner to a user or a group is listed in the change owner to box, click the new owner.

  5. (optional) to change the owner of all subcontainers / folders and objects in the tree view, select the Replace owner of subcontainers and objects check box.

  Then use 'Disk management' to delete all existing partitions and reformat the old drive.

  J W Stuart: http://www.pagestart.com