The ratios of tool and measurement scale

Similar Questions

• How can I remove Microsoft Download center of my office, I downloaded the malware removal tool and do not want to

  How can I remove Microsoft Download center of my office, I downloaded the malware removal tool and do not want to

  Have you checked in Add/Remove programs? --
  Gina Whipp
  2010 Microsoft MVP (access)

  Please post all responses on the forum where everyone can enjoy.

• I ran the system analysis tool and without result updates still won't work.

  * Original title: Windows 7 updates

  It seems I'm not the only one having problems with the updates of Windows 7. I ran the system analysis tool and without result updates still won't work. Is it possible miss me a the question .dll file not showing? I googled about it and still nothing.

  Appreciate any info someone might have on this

  Are there specific error messages or error report numbers given when it fails, or is it just apparently running, but does not find anything?

  If it is running, but apparently not finding anything, just leave it for a while 'loooooong. It was reported a few recent Wu take many hours to find anything, esp if she has a lot of updates to find and install.

  If its reports an error/message number, what (exactly) do report?

  Something to try:

  Update your anti-virus software and run a full scan. Then:

  If its doesn't work, check that service 'Windows Update' and 'Background Intelligent Transfer' are listed and running, according to the instructions of the ' how to check if services are running' section of this article - https://support.microsoft.com/en-us/kb/2730071 IF you have actually the error referred to in article, try the FixIt.

  If WU and BITS services are listed and running, try to reset the Windows Update components - https://support.microsoft.com/en-us/kb/971058

  If still no joy, run the update utility - http://windows.microsoft.com/en-US/windows7/Open-the-Windows-Update-troubleshooter what makes as that report?

• Hi, I am trying to install Adobe Creative Cloud and I get error 43. I tried to use the Adobe cleaning tool and uninstall but nothing has changed. What can I do?

  Hi, I am trying to install Adobe Creative Cloud and I get error 43. I tried to use the Adobe cleaning tool and uninstall but nothing has changed. What can I do?

  Hi carlottav39691716,

  Please see the following links:

  Error 43 - I can't download any adobe apps CC or creative cloud Manager

  Creative cloud, re-install-Dungeon error 43

  Error in downloading, installing or updating Adobe Creative Cloud applications

  Let us know if that helps.

  Kind regards

  Sandrine Bani

• When I'm accommodating the toolbar of the new option to arrange the icons on the toolbar toolbar change several tools come with the words "wrong tool" and have no icon associated with them. What are these missing tools 'bad '?

  When I'm accommodating the toolbar of the new option to arrange the icons on the toolbar toolbar change several tools come with the words "wrong tool" and have no icon associated with them. What are these missing tools 'bad '?

  I see you have fixed this now, but I was about to tell you that you could have accommodated in the 'Bad' by its shortcut "I" tool.

  

  To save a custom toolbar, get everything the way you want and click on the button space work, click new workspace

  

  Type a name for the workspace, and check all three options.

  

  If I have to use a single screen, I use a variant of the Essentials workspace with minor panels collapsed and dock for main panels.  I call this Essentials 2

  

  It also seems to me that with all these options, it's stupid not to take full advantage of them, so I separate my most used instruments for their own group and double column toolbar to adjust the screen.  I tried to drop in the groups for the most used tool near the document image (right). I love it, but it take some time remembering the new positions.

  

• My students use the filling and the signature on a package of .pdf tool I'm going to fill them, but when they record and open the next day their text boxes, that they created with the bucket fill tool and sign all went and many are overlapping.

  My students use the filling and the signature on a package of .pdf tool I'm going to fill them, but when they record and open the next day their text boxes, that they created with the bucket fill tool and sign all went and many are overlapping.

  Hi chbradshaw,

  Instead of filling & signature, tool, use the text comment comment tool, KB doc option. using comments in the PDF, Adobe Acrobat DC files (keyword: Add a text comment).

  Kind regards

  Nicos

• I've upgraded to 2015 CC Photoshop today.  However, the quick selection tools and brush do not appear in a circular/round shape.  I tried to use the support key to enlarge to see if that brings the circle/round view form, but does not work.  All the I

  I've upgraded to 2015 CC Photoshop today.  However, the quick selection tools and brush do not appear in a circular/round shape.  I tried to use the support key to enlarge to see if it carries the form circle/round in sight, but it does not work.  All I get is a focus.  Can anyone help with this please.  Thank you.

  Remove the caps lock

• I would like to cut out an object using the Quick Selection tool and drop the object into another image. Can anyone help

  I use background images and want to cut objects of other JPEG files using the Quick Selection tool and drop them in the background image. So if I have a banana and select the object, I need to copy the banana in the context on the other.

  Hope it makes sense.

  Gary

  Select the banana. Right click > copy layer. Move tool. Click and drag to the other file. Place on the image.

  GOLD: load history and banana in a stack (file > Scripts > load file in the stack). Select banana and layer for copy or create the layer mask.

  Benjamin

• Try learning the Roto Brush tool and I'm stumped.

  OK, I have watched videos, read the help but can't seem to get to the stage of learning Roto Brush tool. I have started a project, imported a video in a model and that's all there is in the project. highlite the window comp, click the Roto Brush tool and hover over the video to work. Show the video, the cursor changes to let you know the Roto Brush tool is activated and ready to go, but mine is just the cursor and if I click to draw, he thinks that I want the video and just grab it and it moves. What on earth am I wrong here? After effects CC, all this so far.

  OK, a new cloud just update and restarted his work... all of a sudden.

• Question on the paint bucket tool and the magic wand tool

  I try to learn Marie-illustration with PS

  I have a few question, since I'm new on this

  

  first on the paint bucket tool, theres you can see, first of all I do preview, then fill with the pot of paint, but as you can see it, theres always have white line

  so I have to manually paint to fill the white line, is theres no adjustment so the filling does not leave any white line?

  the 2nd issue is on the quick magic wand tool

  

  

  I make selection to expose and make new layer that fills with a color

  but as you can see, for example, I use red.

  theres a red leak, so I mus manually erasing who

  is there a setting too for wand of the tool, if you fill the selection with the color.

  the color didn't cross the contour line

  so I'm just curious as to what you can change with a few settings, or his normal procces, so whatever it takes, you need cleaning by yourself

  Thank you

  Photoshop is more (or less) a graphical editor hatched (with a handful of vector tools). Tools like the paint bucket tool work on the paradigm of raster. You can set the tolerance in the toolbar options also high he'll go (255) to select (or fill) all the pixels of the layer.

  If you haven't already done so, try looking at Illustrator, because it is a vector editor; You can change the contours and funds of works of art on the fly and evolve it without losing quality to boot.

• Where are the lines/margins of the Radial filter tools and Spot Removal?

  The lines/lines of the Radial filter and the spot removal tools have disappeared. What has gone wrong?

  I use Lightroom 5 and no update is necessary.

  Press the [H] key.

• Problem with the mouse and the network after the upgrade VMware Tools and hardware to virtual machine

  Hello world...

  I just upgrade my ESX 3.5 servers to vSphere 4.1. All this work is very well with the upgrade right now.

  After that, I tried to mise a niveau of VMware Tools and hardware of VM for my virtual machine and the problems started.

  I tried with two different VM (the two Windows 2003) and the problem appears for the two VM.

  I don't want to test another VM of the different operating system now, I'm afraid to go too far with update of Pentecost the problem I have now.

  I tried two VM to be sure that the problem is not only on a virtual machine.

  First of all, the mouse.

  My mouse has jerky movement. The button works, but sometimes I have to click several times to select what I want.

  I tried to uninstall the mouse in Device Manager and reinstall, but not really Pentecost improvement which (buttons works better, but... not so sure).

  Second problem.

  After you restart the server after VMmware tools and hardware virtual machine, the network link not working anymore.

  When I go to my network card configuration, IP settings are reset in DHCP mode.

  If I go again all my IP settings, Windows says:

  The IP address is hidden from the network and Dial-up connections

  folder because it is not physically in the computer or is a riser

  It does not work. If the same address is assigned to both adapters and

  they become active, only one of them will use this address. This may result

  in the incorrect system configuration. You want to enter a different IP address

  address of this adapter in the list of IP addresses for this card in the list

  Advanced IP address in the dialog box

  If I answer Yes to this, I have to enter a new IP address, and of course, this is not what I want to do.

  If I don't answer, the network working again.

  I think it is a strange message but the work of the vSphere maybe network now.

  Anyone have any idea why my work network and mouse as this upgrade after.

  All other VM that is not upgraded so far works great.

  Thanks in advance...

  (1) make sure that your hardware acceleration is safe enough. I got the upgrade down my hardware acceleration several times already.

  (2) sounds like the new drivers for your NIC cards took over and VMware is basically a new card NETWORK for you. Follow these steps to disable it:

  (a) open a command prompt

  (b) type (without quotes): 'set devmgr_show_nonpresent_devices = 1' and press ENTER.

  (c) type (without the quotes): "start devmgmt.msc"

• at the same time production and measuring the pulse

  Hello everyone,

  I'm generates a pulse for specific time. Now, I want to measure within the same daq card. I've done Vi for him but he has an error. I have USB daq-6343. I enclose my Vi here.

  The problem is I am able to get pulses generated at PIN 6 PFI but reading Vi watch time-out error.

  I plugged the wire between PFI 1 pin and PFI 6 pins on the DAQ card.

  So please suggest me what to do to eliminate this error.

  Thanks & best regards,

  I just looked at your original vi, I had looked only at the most distant (corrected) a previously.  I don't see a good reason to read timeout error you have immediately.  Record of an error timeout on your attempt reading suggests that the code was executed without error so far, including the beginning of the generation of pulses.  That would leave wondering on physical cable connection or possibly some undesirable side effects caused by your cleanup code when you three States a PFI lines.

  The other issue was my suggestion to leave DAQmx Timing.vi outside of the configuration string entirely for cases like this where you only want to build a single pulse.  To be honest, it's a habit & practice I adopted a long time ago.  I thought one of the reasons was that the finished pulse trains required a minimum of 2 samples.  A bit of test code showed me that it isn't true, if my memory tells me there was a time when it * used * to be true.  I don't remember if I have errors or if the task has chosen to generate 2 pulses with just a warning, or something.  I just remember that, while he was working on a module that was supposed to be able to produce any number of pulses from 1 to N, I found that I wasn't actually able to support the case of 1 pulse by asking just 1 sample over sample mode.

  * Anyway *, the other reason to avoid sampling over for a single pulse mode is that in the past, this would consume actually 2 counters on DAQ cards.  Generated the pulse (s) while the other was a help that triggered the first to control the number of generated pulses.  It was unnecessary as you could * also * generate a single pulse leaving the DAQmx Timing.vi out of the config, a method that used only 1 meter.

  X-series cards (like yours) don't consume over 2 programmable counters of the user to generate finite pulse trains, so the lesson I learned a long time ago and was trying to convey is perhaps not so important in your case.  I recommend it even if you know that you will always generate a single pulse, simply because he considered the standard way to generate a single pulse (as seen in examples of navigation).

  -Kevin P

• remove the button, al tools and on the side of the address bar

  How can I remove the favorite tools button (cog) and button (house) House (star) button on the right side of the address bar in IE9 Vista?  After the address at the top bar, there are three icons as shortcuts.

  Thank you.

  How can I remove the favorite tools button (cog) and button (house) House (star) button on the right side of the address bar in IE9 Vista?  After the address at the top bar, there are three icons as shortcuts.

  Thank you.

  These 3 are here to stay.

  I'm sorry.

• I accidentally deleted the bar bar tools and the command and all that is located above the tabs. How can I get that back?

  I accidentally deleted all located above the tabs: toolbar, command bar etc and now I have no idea how to get it back. Can someone help me please?

  User Agent

  Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.0; Trident/4.0; SLCC1; .NET CLR 2.0.50727; Media Center PC 5.0; OfficeLiveConnector.1.3; OfficeLivePatch.0.0; .NET CLR 3.5.30729; .NET CLR 3.0.30618; AskTB5.6)

  You can hide the menu bar in Firefox 3.6 on Windows, on "view > toolbars" or via the contextual right click menu on a toolbar.
  Press F10 or press and hold the Alt key to bring up the menu bar temporarily.
  Go to "view > toolbars", right click on the menu bar, or press Alt + V T to select to show or hide toolbars (click on an entry to switch from the State).

  See also what happened to the file, edit and view menus? and http://kb.mozillazine.org/Toolbar_customization