The reactivation of my stolen phone returned

Similar Questions

• Monitor the problem flashing on the reactivation of the computer.

  Monitor the problem flashing on the reactivation of the computer.

  I have a new HP laptop G60 - 243 CL of Costco and a new HP W2207h monitor. The screen flashes when the laptop wakes fashion "sleep" with the HDMI cable connected. It works very well with the VGA cable. Any assistance in finding the cause would be much appreciated. Here is my hardware spes and a newspaper detailed observations.

  Thanks in advance,

  Paul

  --

  HP W2207h monitor

  680 x 1050 hz @60

  Laptop:

  HP G60 - 243 CL

  AMD Turion X 2 RM - 72 2.1 GHz

  3 GB RAM DDR2

  320 GB SATA, 5400 RPM HARD DRIVE,

  NVIDIA GeForce 8200 M G, with up to 1407 MB total graphics memory (shared).

  16 "16:9 1366 x 768 display

  Drive x drive LightScribe 8 with support double layer
  HDMI

  Here is my log.

  25/01/09

  1 unpack the monitor. With mobile connection cables on: HDMI, USB, power Turn on the monitor. It flashes. Black for about 2 seconds, then the light for a split second, repeat, ongoing. Turn off monitor, the driver of the CD W2207h monitor, restart. Monitor works normally.

  The monitor HP w2207h Readme says driver using driver Nvidia 10.65 or later version.

  The Control Panel on the computer laptop G60, NVIDIA GeForce 8200 M g: Device driver 7.15.11.7614, 11/07/2008 (this is the latest driver from the HP support page. See on 27-01-08 below).

  Install W2207h Monitor driver CD and restart the computer. Control Panel, device, Manager I see two monitors, the two "monitor PNP generic", first Hardware ID "MONITOR\HWP26A8", the second "MONITOR\SEC314C", both with the 6.0.6001.1840 driver (longhortn_rtm.080118 - 1840), I wonder if, maybe, the pilot did not.

  2 put the laptop into sleep mode. Wake the portable computer and monitor flashes market, as described in (1). Image appears normally while the monitor is turned on for fraction of a second intervals. If reboot laptop, follow the work properly.

  Occasionally, flashing monitor heal without rebooting. Out of about 10-15 tent: once the monitor began to function properly while the computer shuts down. Once the monitor was OK on the reactivation of the laptop. Once, while the screen flashes, I removed the USB cable and the monitor started working. None of this is repeatable.

  3 removed the HDMI cable and started using the VGA cable and an audio cable. No more flashing on the reactivation of the computer. Very repeatable. About 7 7 times.

  01/26/09

  Control Panel, two monitors, Device Manager, the two "monitor PNP generic," first of all we have the Hardware ID "MONITOR\HWP26A8", second is "MONITOR\SEC314C", both with the 6.0.6001.1840 driver (longhortn_rtm.080118 - 1840), I wonder if, maybe, the pilot did not.

  27/01/08

  Download NVIDIA drivers

  Downloaded from Nvidia support: Version 179,28, 2008-12-18, 179.28_notebook_winvista_32bit_beta.exe Beta (attention: are not supported by the laptop to the manufacturer.)

  HP support: Version 7.15.11.7614 has, 2008-09-08, sp40385.exe (same version that is installed.

  Version of the driver installed is the same that the one on HP support site, so did not not update driver.

  w2207h monitor download driver

  Download and install A Rev 2.0, 4.0.100.1189, 2008-10-16

  Version of the file now reads 6.0.6001.18000 (longhorn_rtm.080118 - 1840), I think it's the same as the driver already installed.

  Flashing problem is unchanged.

  –

  end

  It was the monitor! I brought my laptop and a HDMI cable at Staples where I bought the monitor and tried on the w2207h on set. It has worked well. Took the phone in and out of fashion 'sleep' several times. I'm in the store week return policy 2 stables will replace it. The seller was very accomodating to let me try different monitors with HDMI and VGA cables and my laptop while I was there. I even brought in a large piece of cardboard to protect the ceiling :).

• Phone info of the device number differs from phone number

  The number which is located in the folder of device information into the Launcher has a different number than my cell phone number. How I found? Someone left me a voicemail so I pressed "1" to retrieve the message. However, my phone (Pixi) dialed a number that wasn't mine. How could it happen? I'm suspect that when my Pixi phone has been replaced at the Sprint store - it froze the second day and Palm support instructed me to return the unit for a new - they gave me a phone that had been used briefly by someone else (although the shop told me it was a new phone).

  So when the Sprint Store copied my data in the 'new' phone (which reproduces about 80 entries of contact), it doesn't have to change the phone number in the input of the unit. The only problem this causes is the speed dial, the call to voicemail. My real phone number appears in the outgoing calls and incoming calls reached my phone.

  I contacted the Palm and Sprint, and both have never run into this problem before. Then they tell me that I have to do a hard reset (groan). If - finally - my question: what happens to my data with a hard reset? I use CompanionLink to sync Contacts and calendar between Outlook and my google account - no problem here?

  What of my apps that I bought the app catalog?

  What of my entries to tasks, Memo and camera?

  What of my three E-mail accounts?

  What of my texts?

  You solved my problem! Thank you very much! I was going to pick up the phone to the service center of Sprint for the hard reset and restore process. After obtaining your response, I called Sprint and spoke with a person of advanced technical support. He played the reconfiguration of network and I now have my real phone number back on the phone. You save me a lot of time and effort - thank you again.

• Reinstalling windows 7 ultimate retail after changing the SSD, the motherboard and the processor. I'm having a problem with the reactivation?

  I'll upgrade my desktop PC, by changing the motherboard, processor and SSD drive with the OS on it to boot. I have a problem with the reactivation of windows, and should I turn it off, somehow first, or the previous version will be considered as-enabled automatically? It is a retail, windows 7 64 ultimate version. Please advise, thanks in advance.

  Just reactivate by phone:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

  Remember, if it is a retail upgrade license:

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

  You can skip to enter the product key and try the activation of the phone to work around this problem.

• Win7 in VM (VirtualBox) continues to request the reactivation

  ... I have an MSDN subscription, but at home I run Linux and I frequently distro hop.

  To simplify my life, I have a partition holding VirtualBox and a VM Win7 64 bit I get when I need to get into WINDOWS. Until very recently, since I started using Crunchbang, it always went without a hitch.

  Lately the WIN7 installation asked that I re - activate the license every two days.  I haven't added new hardware (real or virtual), and on the other that of the configuration records shared through virtualbox, I did change all the parameters of the virtual machine (if it is not broken don't fix).

  1. Is it just the WIN7 execution prices in a virtual machine?
  2. Is there than a more "compatible" Linux based VM Manager should I use?
  3. Is there a limit to how many times can I re-enable it?
  4. Is there a policy that says after support ends, the activations will be refused?
  1. If I use the phone method'm always limited by 10 activations (including any web activations)? or is it 10 re-activate by phone and by web 10 (total = 20)
     Ten of the reactivations by Internet without having to contact Microsoft. You can reactivate an unlimited number of times by phone.
  2. You said "on the same machine", which defines "the same machine?
     Which means, if it's the same machine you distro jump on and make constant changes.
  3. This limitation is for server installations?
     Yes, if they are retail.

• Smartphones blackBerry 9360: help! Stolen phone

  Hi, people and Hello Blackberry...
  I had a Curve 9360 and its been stolen about a month ago... I am currently borrow my friends Blackberry...

  The thief who stole my phone is currently using the blackberry... I know because when I send a message through PIN to a phone without BIS... It does not say "D" next to the message... However, to the phone that was stolen, says a "D" for delivered next to the PIN message...

  I have already mentioned the phone stolen from the police, they have evidance of the person... They just cannot identify the person

  I need Blackberry to look through the system and see who is registered on the device at the moment.

  Please help me!

  It is a community of users support forum. We are not employed RIM, but volunteers who enjoy helping other users. ON-BOARD staff rarely comment on queries posted here.

  Quite honestly, the police can get a result, they know how to work with mobile service providers to keep track of stolen devices.

  Grab giffgaff is your portal contact BlackBerry.

• I got the Beta version on my phone and now I HAV to change no update.

  I got the Beta version on my phone and now I HAV to change no update. Coz my phones says 10.0.1 and it is up to date. FYI, I deleted the profile end time. !

  < re-titled by host >

  Hello

  If it says 10.1 ios so it is like mine and up-to-date.

  See you soon

  Brian

• the camera shutter sound cannot be silent with the mute button on my phone i 6 s

  the camera shutter sound cannot be silent with the mute button on my phone i 6 s

  Depending on where you purchased your phone, this is not possible, because of legislation in these countries that regulate this feature.

  In all other cases, try to force reboot the phone by holding down the button sleep and home for 10 seconds, until the Apple logo comes back again. You won't lose data, but it can cure some problems after installing new software or applications.

  In the case where this does not work, restore the phone:

  Use iTunes to restore your device iOS to factory settings

• How can I display only the music downloaded to my phone

  My phone displays all the music in my library and not only the songs downloaded on my phone.  I've looked everywhere and the option to display only the songs in my iPhone seems to have disappeared.

  Click the Middle drop-down menu that says artists or Albums etc, and then select only downloaded music.

• can I erase all the data from my old phone with out damaging the data on my new phone?

  My old phone is disconnected from my iCloud, I want to know that the data on my new phone will not erase?

  Provided that you (a) save it to the top and (b) have signed, Yes.

• How to disable the option to find my phone, if I phone 4S dead?

  How to disable the option to find my phone, if I have Iphone 4S dead? I turned on Itunes and I wanted to restore it, but it's impossible because I find my iphone app is on. Synchronization is impossible

  If the iPhone is dead, how do you plan on catering?

  You can disable FindMyiPhone by logging iCloud.com.

  -> iCloud: remove your device to find my iPhone

• I have been deceived to give my Apple ID and password of my stolen phone. Is their ability to permanently disable this phone? -What is my Apple ID still safe?

  I have been deceived to give my Apple ID and password of my stolen phone. Is their ability to permanently disable this phone? -What is my Apple ID still safe?

  Immediately change your password Apple ID. Apple security contact. Freeze all your credit cards.

• Why can't save my new 6 s of a 5 on the cloud without setup assistant, phone was at the verizon store installation.

  Why can't save my new 6 s of a 5 on the cloud without setup assistant, phone was at the verizon store installation.

  This error message do you receive? is a new feature in iOS 9.3.1?

• Hi I want to erase all the data from my current phone if I erase content and settings would be deleted all the data off my sim card? Thanks for your help

  Hi I want to erase all the data from my current phone if I erase content and settings would be deleted all the data off my sim card? Thanks for your help

  Erase the data on your phone will not erase the data on the sim card.

• My previous photo library has now been replaced by the opening one. How to return to the photo library?

  When I double click on an Aperture library (the app is no longer installed on my computer) Photos repaired and opened it.  My previous photo library has now been replaced by the opening one. How to return to the photo library? Where at - it go?

  < re-titled by hosts >

  You should have several libraries - hold down the option key while launching Photos and check every library in the window select library - you should find the original it

  LN