DONGLE USB DVB - T is not recognized after 5 minutes of use.

Similar Questions

• Solution: The USB floppy drive is not recognized during installation of XP of RAID

  Hello

  This Solution is for notebooks Qosmio with RAID driver during (manual installation of windows)

  I found the Solution to this problem,

  [When you install Microsoft Windows XP by using a floppy drive USB on a player who]
  requires a driver during the installation, the USB floppy drive is not recognized in all
  installation. When Windows XP searches the driver of the second time, he will not be able to see
  the floppy USB drive drive and prompts the user for the driver (RAID) again.
  The installation will never reach this point. ]

  Solution:

  This is a limitation of Microsoft, the Floppy Drive are do not appear in the file Windows 'txtsetup.sif.

  Simply change the floppy drive in another brand and avoid Usb 2.0 external Usb floppy plus old 1 Try
  Also note the back of drive sometimes they write (no bootable) avoid this also

  I personally Test this and it does not work it is "IBM Portable floppy drive" drive silver
  P/N 27L 4226, FRU P/N 05K 9283 TEAC CORPORATION MODEL NO. FD-05PUB

  The following USB floppy drives are listed in the file "txtsetup.sif" and are supported:

  Device ID = VID: 057B and PID: 0000 for external floppy USB SONY drive, Sony 09K 9835 part number

  Device ID = VID: 0644 and PID: 0000 for floppy drive to the external USB, TEAC, IBM replacement part number (FRU) 13N6752

  USB\VID_03EE & PID_6901; Mitsumi USB floppy drive

  USB\VID_057B & PID_0000; Floppy drive USB YEData, Sony part number 09K 9835

  USB\VID_0644 & PID_0000; Floppy drive USB TEAC 27L 4226, FRU 05K 9283 IBM option part number

  The following USB floppy drives are not listed in the txtsetup.sif file and are not supported:

  USB\VID_03F0 & PID_2001; HP
  USB\VID_054C & PID_002C; Sony
  USB\VID_057B & PID_0001; YEData
  USB\VID_0409 & PID_0040; NEC
  USB\VID_0424 & PID_0FDC; SMSC

  If you want manual of Installation of Windows Xp Media Center Edition 2005
  then check out my discussion here

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=16498

  Thank you for the very interesting topic.
  I think that it s an enemy of information all of you who have the same problem.

  Thanks ;)

• Pavilion p6210t: CD/DVD HP Pavilion p6210t drive is not recognized after upgrade Windows 10

  HP Pavilion p6210t DVD/CD drive is not recognized after the upgrade to Windows.  DVD/CD material is: LightScribe16XmaxDVD + / R/RWSuperMultidrv.  I can't find an updated driver for this device, download and install. Thanks for any advice you can provide.

  Thank you for your response.  I can't find somewhere - it now despite a lot of research - I read on a very simple solution to this problem which is (was) affecting hundreds of users HP.  In essence, the solution said that the DVD drive has in fact been recognized [as evidenced by his appearance in the BIOS] but has been "identified" and how to fix this problem was to go into the DEVICE MANAGER and delete the incorrect identification reference - then restart the computer and Windows 10 would correctly identify the DVD player and correctly in the DEVICE MANAGER list.  I decided to try this simple fix before one of the more complex solutions that were offered.  The simple solutioon worked! 

• Fast user inop on vista switch. How to re - enable it. "gpedit.msc" is not recognized when I try to use it.

  original title: I see questions but no answers. Fast user inop on vista switch. How to re - enable it. "gpedit.msc" is not recognized when I try to use it.

  I have vista on my dell desktop pc. Some how I managed to disable the fast user switching and I wan't to reactivate. I see this same issue, and it implies that the answer to the question, but I see no real response. I see online that using 'gpedit.msc' will open a window to access the problem, but my computer can't find it. Can you please help.

  The Group Policy Editor is not included in the Home of Windows versions. You can use one of the other methods in this article:

  http://www.Vistax64.com/tutorials/89939-fast-user-switching.html

• Extremely slow start, IE will not load after 4 minutes

  Original title: extremely slow start, IE will not load after 4 minutes

  I have a disaster like now, I am unable to discover HIM, Fox, Chrome & need help as where to go for advice, thank you

  PFM

  Hello

  Thanks for the quick response.

  Have you checked the State of the issue in safe mode?

  You can start the computer in safe mode with network and check the status of the issue.

  Start your computer in safe mode.

  http://Windows.Microsoft.com/en-us/Windows/Start-computer-safe-mode#start-computer-safe-mode=Windows-7

  Please update the status of the issue, it will help us to help you more.

• Hi I bought Acrobat Pro a few years ago. now, I spent from the pc to the mac, but can't seem to reinstall Acrobat Pro. Can download the program, but the serial number is not recognized. Can I still use my Acrobat Pro purchased on my mac?

  Hi I bought Acrobat Pro for my pc a few years ago. now, I spent from the pc to the mac, but can't seem to reinstall Acrobat Pro. Managed to download the program, but the serial number is not recognized. Can I still use my Acrobat Pro purchased on my mac?

  probably not.

  you need a platform swap (Exchange a product Adobe of a different version of the language or platform) but which is only supported for the latest versions of adobe.

  You can get the upgrade pricing and exchange platforms, or use an abonnemement DC acrobat and use on both platforms.

• USB printer not recognized after Windows update

  OT: usb device not recognized

  After that suddenly stop, reboot, done, the device is plugged in where the printer indicates that it does not recognize the device. I said abattissent unplug it and reconnect it and if it doesn't work me to replace... I re install the driver for the Hpdeskjet940c but nothing works...

  Hello grasshopper.

  This problem may be caused mainly by broken printer drivers, this could have been caused when you installed the updates. I suggest that you start with a restoration of the system on the computer by choosing a restore point when it was working fine.

  a. Click Start, type system restore in the search box and then in the list click on the system restore program.

  b. If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  (c) in the System Restore dialog box, click on choose a different restore point and then click Next.

  d. in the list of restore points, click a restore point created before you started having the problem, and then click Next.

  e. click Finish.

  You can see the following article for reference:

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  You can also try driver restore on the computer and check if it helps.

  To roll back a driver in Windows send the driver to the version that was finally installed for the device. Restoring a driver is an easy way to return a driver for a working version when a driver update fails to fix a problem or maybe even a new problem.

  a. open the Device Manager. To do this, click Start, type device in the area Manager search and then click on Device Manager in the list programs.

  b. right click on the device for which the previous version of the driver is desired and then click Properties.

  c. click the tab drivers.

  d. click on Roll Back Driver.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

• USB-6009 not recognized after the blue screen of death

  I have two devices USB-6009, used with NOR-DAQmx and Labview to make some analogue simple analogue input and output.  The USB box - two 6009 were previously works very well on this PC.  Recently, I got a blue screen of death, associated with a different USB device to (non - OR) connected to the PC.  I not save the information of the blue screen of death.  When I restarted the computer, the USB-6009 devices were no longer recognized by Labview / MAX.  The Green LED on the USB - 6009 s do not come.  The USB - 6009 s appear in the Device Manager of Windows with a yellow exclamation point ("Windows cannot load the driver for this hardware device").  If I connect the USB-6009 case to another PC, MAX recognizes them on this PC, and I get the usual flashing green LED.  If I connect another USB-6009 (never connected to this PC), I get a green LED solid, and, says Windows cannot load the driver.

  I am running Vista, Labview 8.5 and NOR-DAQmx 8.9.  I rebooted 5 - 6 times, I tried disabling and the reactivation of the USB-6009 by windows Device Manager, I tried the options "update driver" in Device Manager.  Any advice on how else to solve it?  Thank you!

  The driver update and turn do nothing to the main driver - DAQmx. Reinstall or repair that.

• Constant pop up of the notice that says "USB device not recognized" after the device has been disconnected

  Trying to connect a Sony W760 to PC Suite and receive the notification as the "peripheral USB is not recognized. Clicked on the indications of alert and monitoring. The device is not installed. Computer restarted, but the alert keeps popping up every 10 to 15 seconds. How to stop?

  Found the answer to the problems by accident. I had turned off my Avast, during the installation of the programs, but did not know that the computer came with Norton already active. Nothing on the screen noted that it is there. The Sony site, under the heading troubleshooting USB and I saw it mentioned to disable McAfee. Became curious and went to control panel > programs and features looking around and found the Norton. Uninstalled, downloaded programs from Sony, install and everything works fine. Just a reminder, check all your security system before installing programs.

• My seagate backup more external hard drive not recognized after system restore

  I have a small sony vaio netbook running windows 7 starter edition. I did a system restore recently - saved on an external hard drive usb, nine 1 to seagate backup more - now after fighting with 124 updates hard disk is not recognized. Seagate has say the drivers are pre installed in windows. convenience stores never work - I find the trouble shooters are almost always useless - is this just me?

  It works on my laptop of friends - so im guessing it is the operating system reinstalled - what I do?

  Hello Neil,.

  First of all, we apologize for the late response.

  1. What happens, do not install the updates?
  2. What is the complete error message you get, when the update installs?
  3. What is the update kb article number?

  
  for problems with windows updates, run the tool in troubleshooting Windows Update:
  Open the Windows Update troubleshooting tool
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-Troubleshooter
   
  For the problem with the external hard drive
  Code 28 shows, the drivers for this device are not installed.
   
  Error codes in the Device Manager in Windows
  http://support.Microsoft.com/kb/310123/en-us
   
  Log in as administrator and then try to install the drivers
   
  How can I connect as an administrator?
  http://Windows.Microsoft.com/en-CA/Windows7/how-do-i-log-on-as-an-administrator

  S eaTools for Windows

  http://www.Seagate.com/in/en/support/downloads/item/SeaTools-win-master/

  Additional information:

  "Access denied" or other errors in the access to or work with files and folders in Windows

  http://support.Microsoft.com/kb/2623670/en-us

  I hope this helps. Please get back with the results.

• USB not recognized error message on the use of the memory card.

  Hi ALL,

  I have a question that my memory card is not supported in my phone. It shows the preparation to installation but after that, there is no progress as (media analysis) as do other smartphones.

  When I use this memory card on my laptop, it shows for a while, but on opening any file it is closed and shows USB device not recognized.

  Someone, please help, is possible to fix this or my memory card is corrupted (impossible to use now and further).

  Hello

  Other cards work properly on this computer?

  This card works fine on other computers (not to mention that the phone)?

  Remove the card from the computer - set aside for a bit (at least a few minutes) - pending
  Restart the computer - once it is running re - insert the card. Then - click right on the
  Lead check file - check for properties - tools - errors - drive Explorer.

  If this help not the card is probably defective (assuming that other cards work in the drive so
  the drive is not defective). In some cases the data can be retrieved from a card however is it expensive.
  Check with a real computer store and online.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Color LaserJet M277dw MFP: Cartridge not recognized after HP recently updated.

  I can use WIndows 10 if the fix is available for this OS.

  I recently updated my HP LaserJet, and after the update, he refused to print, scan or copy. The error message on the display says: "Cartridge not recognized" and it has a large image of the yellow and black cartridge, cyan and magenta those smaller, but below. The printer has a wireless connection to internet.

  Any help would be greatly appreciated.

  Thank you

  Hello

  Install the following firmware for your printer, and then look for a difference:

  http://support.HP.com/us-en/drivers/selfservice/swdetails/HP-Color-LaserJet-MFP-M277-series/7089945/model/7089949/swItemId/kJ-149905-2

  Kind regards

  Shlomi

• Time Capsule not recognized after the replaced logic board.

  Time capsule is not recognized

  I too am in the same "boat" as 'bruf' and 'Pitbullover' my Mac Book Pro had a card failure logic as well as graphics - warranty - replaced but now the MBP does not recognize Time Capsule.  Directly linked to the time via an adapter for MBP port capsule.  It was working OK before the Mac went to repair.

  I followed the great suggestions of LaPastenague (thanks for all the time and expertise you provide other users of Apple).  Tried the factory reset button, but no result. (By the way there is always a flashing amber light on the TC - is this usual?)

  Checked the Finder - showed the distance disc - but no mention of a time Capsule.

  The TC is never used as a return to the top.  I gave up trying to use it as a router, so there may be some vestige of the conflict still in the installation somewhere.

  I will follow this thread with interest in the hope that the wonderful 'gurus' out there can suggest a solution.

  With satisfaction!

  The TC is never used as a return to the top.  I gave up trying to use it as a router, so there may be some vestige of the conflict still in the installation somewhere.

  Even if it is not used as a router, it is usually easier to him have plugged into your router main and fulfilled.

  What model is the TC?

  This modem do you have? Brand and model please.

  the time Capsule.  Directly linked to the time via an adapter for MBP port capsule.

  Exact details... which adapter... has this crush on ethernet?

  Or Ethernet USB...?

  It could also be a USB wireless... but probably not.

  Have you tried the manual configuration method?

  https://discussions.Apple.com/message/29612657?ac_cid=sa123456#29612657

• Pavilion s5-1020: CD not recognized after Windows Installer 10

  I downloaded W10 and now my CD is not recognized.

  I did without success but then conducted a scan for malware with a program that I got with the support of HP.  After that this analysis completed and removed 38 items malware I rebooted and the CD is now recognized.  I don't know what effort did the trick, maybe both.  Thank you if it is your solution.

  Tim

• Laptop Toshiba DVD RD/CD RW ROM not recognized after Vista installed

  My Toshiba laptop which has Windows Vista cannot read my ODD.  A month ago I had the same problem which was worst, could recornize not WEIRD at all.  Now, it recornizes ODD, however, after the execution of this program to fixhttp://support.microsoft.com/gp/cd_dvd_drive_problems, still reads at all.  Please help me!

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  ============================================================

  If necessary check with the help of Toshiba, their drivers online (update or reinstall) and their forums.

  Toshiba - Forums
  http://laptopforums.Toshiba.com/

  Toshiba - Contacts
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  Toshiba - drivers - access your model
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba - Support
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.