The recovery disk is lost

Similar Questions

• Satellite L30 - I lost the recovery disk

  Hi guys,.

  I have a Satellite L30 and need to completely reinstall Vista but I lost my recovery CD

  Help, please

  Hello!

  Are you sure it's the recovery disk?
  What is the content of the CD if you find Windows to display the contents of the CD/DVD?

  These messages appear normally if the CD is noisy and so it can t be read properly or in the worst cases the CD/DVD drive is faulty and should be replaced. :(

  Good bye

• How to recover the Satellite L30-140 - I lost the recovery disk

  Hello

  I have a Satellite L30-140 and I want to recover the windows on that.
  I lost the dvd recovery-. -.
  Is there a method to recover? as acers Alt + f10 recover menu?

  Thanks for your help :)

  Hello

  You need the recovery disc, either the clean Microsoft Windows disk in order to install the operating system gain.
  L30 being a little older, I doubt that you can order the recovery disk
  That's why you need a Microsoft Windows CD!
  You will need to buy this CD if you are not the owner of the Microsoft Windows CD.

  Welcome them

• Satellite A100-784 - I lost the recovery disk

  Satellite A100-784, I had, but I lost the recovery disk and I want to restore the PC

  What should I do?

  Pleas help me

  You should contact the ASP in your country if you wish to order a new.

  But if you want to restore only the operating system installed you can then also use a clean Windows CD.
  After installing Windows, you can download drivers Toshiba of the European driver Toshiba page!

  concerning

• Satellite Pro A210 - how to retrieve it with the recovery disk lost?

  I had some problems with my individual Pro A210 (AMD Athlon 64 x 2, Vista, 120 GB of HDD, 2 GB of RAM), and it seems that I did the recovery disks when new and you have misplaced them.

  What can I do?

  The hard disk should have a recovery Partition.

  Try holding down the zero (0) key when you turn on the laptop, this should start the recovery process.

  If this does not work, press F8 rapidly after the Toshiba start screen to enter in the Windows Start menu, where you can choose to run the recovery/restore.

• I have a hp compaq pressario c797ee, I not create recovery disk and lost data. Help, please.

  I not create recovery disks, in fact could not create because the DVD could not be the installation program appropriate for the burn. When I realized how do it, I had already deleted the recovery partition and had lost data recovery. The name of product HP Compaq pressario C797ee, the operating system is Windows Vista Home Basic Edition. Please tell me the link where I can download the recovery disks from which any alternative appropriate.

  Hello

  Please use this:

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?objectID=c00810334

  Kind regards.

• Get the recovery disk HP Pavilion DV7

  Drive HARD failure resulted in a new HARD drive. Now, I need the recovery disk. The laptop is running Vista & had a record of recovery only. Lost drive = lost recovery.

  Any help would be appreciated.

  See if it's the right place:

  http://support.HP.com/us-en/document/bph07143=

• Satellite L300-1BV you can file a copy of the recovery disks

  Hello
  Just out of curiosity.
  I have not tried, but I heréd you can make a copy of the recovery disks, using the toshiba disk creator.

  I just thought it would be faster posting this question, rarther than to try.
  I don't know it costs £30 for a copy of the recovery disks, which led me to think are for people who did not create recovery disks or people who lost it copy recovery disks.

  I myself only one copy

  No, you can do as much as you want. But it only works on the L300

• Re: Satellite A100-233 - where to get the recovery disk

  I have laptop Satellite A100-233.
  But I've lost my product recovery cd and I need format my computer now.

  How can I download on the internet.

  Can you help me?

  Thanks from now.

  Toshiba recovery image cannot be downloaded.
  The recovery disk for the new series of laptops can be ordered here and you will have to pay for it:
  https://backupmedia.Toshiba.EU/landing.aspx

  But if your laptop is a bit older so maybe an ASP in your country could help you order this disc

  In very rare cases you will not be able to order a disk if your computer laptop would be belongs to a series of abandoned

  In this case, you will need to install the OS from the MS Windows CD

• How to restart the Satellite 5200 801 without using the recovery disk?

  Hello
  I haven't used my Satellite 5200 801 for awhile and now it does not start. That's what I have on the black screen:

  Intel® Boot Agent Version 4.1.04
  Copyright © 1997-2002, Intel Corporation
  PXE - E61: Media test failure, check cable of
  PXE - M0F: Exit Intel Boot Agent.
  Insert system disk in drive.
  Press a key when tready.

  I have the product recovery disc, but which will erase all existing data and rebuild. Is there a way to boot my PC without the use of the recovery disk?

  Thanks for any help.

  > PXE - E61: Media test failure, check cable of

  This message means that laptop tried to boot from LAN.
  Given that this was not possible the PXE - E61: Media test failure, check cable appeared

  I guess that the HARD drive is defect and therefore, the laptop won't boot from the internal HARD drive.
  In this case also your internal data on the HARD disk are lost.

  But to be100% sure that you can remove the laptop HARD drive, could use a drive enclosure HARD 2.5 to connect the HARD drive to another computer just to check if you would be able to access data on the HARD drive

• Equium M50 cannot read the recovery disk

  I have a fairly old Toshiba Equium M50 - 164. I lost a few configuration etc files and wants to rest to factory settings.
  I have the recovery disk, however, the reader does not read it. I tried other discs and that they is not read.

  Any suggestions? Thank you

  And what is with the operating system?
  Different discs are readable on operating system?

• Re: Phone Pro U200 - where to get the recovery disk

  I lost my restore disks and ask them to reboot my system after son modified system and remove a large number of files main system without my knowledge.

  I tried a web site to buy one, but they can't find them.

  Can anyone help please so that running out of ideas on what to do.

  Thank you!

  Hello

  If I understand your question, you are not able to start than your laptop and operating system Windows doesn t start too.
  Is this good?

  If you are not able to start windows or using safe mode or normal mode.
  Is this good?

  Well, in this case you will need a Windows bootable disk.
  You must either the Toshiba Recovery disk or the original CD of Microsoft Windows.

  Usually, you can order the recovery disk Toshiba of the ASP. But in some cases it would not be possible if the device would be too old. However, you should ask the ASP.

  Good bye

• has had to use the recovery disk to restore all applications, including windows xp... trying to get windows update but get the error message. any idea on how to get the updates

  Drivers for computer laptop all corrupt had to reformat and do recovery disk.  lost all updates to windows xp.  try to get the updates, it will scan I get this message... can someone help.

  [Error number: 0 x 80244019] The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem. For self-help options: Frequently asked Questions Find Solutions Windows Update Newsgroup To support options: Microsoft online assisted support (no cost for Windows Update issues)

  I am pleased to have been of assistance.

  Tricky

• Windows recovery system cannot read the recovery disk

  I have Vista laptop computer model pavilion POS, when I bought it, I made a creation of recovery disks, but now when I put it in my PC to see contains I see an error that Sandra insert your disc and system cannot fix it and I also used microsoft fixed it Center but cannot fix it.

  Hello

  Here are all the HP information on different methods to recover back to factory settings

  Three ways to recover the PC to original operating status

  You have a choice of three ways to run a recovery and restore your computer to its original state. The recovery process may take an hour upwards or more and is not complete until the prompt to connect to the computer. When the recovery is complete, don't forget to run the update of Microsoft Windows and the HP health check to install all the drivers updated and software.
  1. If the computer can boot to the Windows desktop, start the Recovery Manager.
  2. At startup, press f11 to start Recovery Manager.
  3. Restore the PC to its original state with the HP Recovery Manager of in Windows Vista
     If the PC can be started and opens on the Windows desktop, you can use the HP recovery disk to restore the PC to original factory State by following the steps below.
     1. Click Start and enter the recovery in the field of research. Select Recovery Manager in the list, when it becomes available. Allow the action to proceed, if you are prompted. The HP Recovery Manager opens.
        Alternatively, click Start , all programs , Recovery Manager , and then Recovery Manager . Allow the action to proceed, if you are prompted. The HP Recovery Manager opens.
     2. Click Advanced options , System Recovery , and then click Next . The PC will restart and reopen the Recovery Manager.
        Alternatively, if the advanced options is disabled, click Next , and then System Recovery . The PC will restart.
     3. When the PC restarts, select the System Recovery option and click Next .
     4. If you are prompted to use the Microsoft System Restore , click No and then click Next .
     5. When you are prompted, select back up your files first (recommended) , and then click Next . Follow the on-screen instructions.
     6. When you are prompted to recover without backing up your files , please STOP before you click Next .

        CAUTION:

        It's the last chance to change your mind recovery PC and delete all the files and programs. Once you click Next , the restore process cannot be stopped

     7. If you are convinced that you want to start the recovery process, click Next . The PC immediately starts formatting the disk hard drive and destroy all data.
     The recovery process may take up to several hours and will return the PC to its original state. All custom, settings drivers, software and upgrades or hardware updates are lost and must be reinstalled.
     Restore the PC to its original state with the HP Recovery Manager if Windows Vista is not accessible

     If the PC does not start under Windows, it may still be possible to use the HP recovery disk to restore the computer to its original state. The Recovery Manager can be started during the boot process by following the steps below.

     1. Press on the button / stop to start the PC and press the f11 key when the standard BIOS guests appear on the black screen.

        NOTE:

        By pressing the f11 key at startup on a computer with an image factory HP will start the system recovery process, even if the message is not displayed.

        • If the HP Recovery Manager can access the hard disk recovery partition, a prompt to back up user files before you start the recovery
     . Follow the instructions.
     • If the HP Recovery Manager cannot access the hard disk to resolve system errors, you need to use the recovery disk custom that you created to recover the hard disk to its original state.
     • If you have not created the custom recovery disk, or disks are damaged, you can order a replacement of HP recovery CD.

  4. When the Recovery Manager starts, follow the instructions of recovery step by step , shown above.
  Solve a common problem of recovery.
  If the original operating system is changed to a non - Vista OS, the Recovery Manager cannot be launched either office or by pressing f11 at startup. You can use the recovery disk to restore the computer to the original state of Vista. If you are using a non - Vista OS, you can use a third-party partition management program to recover hard disk space.
  Restore the PC to its original state with the recovery discs

  If the PC cannot access the Windows desktop, and the Recovery Manager cannot be started by selecting the f11 at startup key, you can use either the recovery disc custom that you created, or you can order a recovery CD to replace HP, to boot the PC and restore the hard drive to its original operating state.

  NOTE:

  Run the recovery process by using the custom recovery disk you created can take less than an hour, while you use replacement discs ordered directly from HP can take four to six hours and includes several reboots.

  If the HP Recovery Disk Manager can access the hard drive, it will attempt to repair the recovery partition. If successful, a prompt to continue execution of the recovery using the Recovery Disk Manager.

  Use the recovery discs to restore the PC by following the steps below.

  1. Insert the recovery disc into the optical disc drive and start the computer.
     If the computer is running, insert the reinstallation disc and immediately click on Start and select restart to force the computer to boot from the recovery disc.
  2. When prompted, Press any key to boot from the CD or DVD, press any key on the keyboard.
  3. Leave the recovery disk boot and load the files required, while the Microsoft loading screen appears. It may take several minutes to load the required files.
  4. When the HP Recovery Manager window appears, click Advanced options , System Recovery , and then click Next to open the Recovery Manager.
  5. Follow the on-screen instructions and perform the necessary actions.

     NOTE:

     Do not interrupt the recovery process even though the computer may restart, and the Windows desktop can display at different times.

  • When you are prompted, follow the on-screen instructions to backup user files.
  • After completing the backup, when you are prompted, reinsert the recovery disk, and then click Next to continue the recovery process.
    A status box is displayed to indicate the State of the recovery and the estimated remaining time.
  • If you have used several disks when you created the custom recovery discs, follow the prompts to remove the first disc and insert requested discs.
  5. When you are prompted to Insert additional driver disk , take one of the following actions:
     • If you purchased a replacement of HP recovery disk and it included an extra driver disc, insert the disc, and then click OK or Next . The recovery program checks the additional drive and installs the necessary files.
       After you install the additional files, a prompt to remove extra disc and insert the original recovery disk.

     • If you bought a replacement at HP recovery disc, and he didn't get an extra driver disk, click ignore or Cancel . The recovery program will ignore the request and install the following file on the recovery disk.

     • If you have created a personal recovery disc, press Next to continue.

  6. Continue following the onscreen instructions to complete the recovery process.

  NOTE:

  If you have not created a personal recovery disk or the recovery disk will fail or corrupt, see HP - order recovery discs for Windows 7, Vista or XP laptops for more information.

  7. Error message on my Vista computer: missing or damaged file: C:/windows/system32/drivers/ATAPI.sys. (Status: OXC0000098). NO RECOVERY DISK! (lost).

     Missing or damaged file: C:/windows/system32/drivers/ATAPI.sys. (Status: OXC0000098). NO RECOVERY DISK! (lost). How can I recover my system, if possible? It does not even start.

     Do you know when this problem started?  Try a system restore to a point in time BEFORE the problem started.  Here is the procedure: http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/.  Don't forget to check the box to show more than 5 days of restore points.  If the first attempt fails, then try an earlier point or two.  NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.

     If the system restore does not work, do a startup repair, boot from the disk Installation of Windows Vista genuine (or one that you can borrow from someone) or a recovery disc.  Here is the procedure: http://www.bleepingcomputer.com/tutorials/tutorial148.html.  The Startup Repair tool can repair atapt.sys.  You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.

     If you do not have a floppy disk, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD.

     If this does not work, try to start in safe mode (click on the F8 key during startup and go into safe mode with network - or using the prompt from the disk, if necessary, several times).  Then we will check some of your system files:

     Go to start / all programs / accessories / command prompt and right click on command prompt, and then click Run as administrator (skip thiis step if you use the disk)...

     Type sfc/scannow, go and let it run.  It will scan and try to correct some of your system files.  If all goes well he comes complete with no corruption, it could not repair (if it has these post of corruption here or try to analyze it to find the problem or files using http://support.microsoft.com/kb/928228.  In a best-case scenario, he'll fix Atapi.sys.

     While in the command prompt, type chkdsk /f /r and enter and let it run.  It will scan and try to solve any corruption or bad sectors on your hard drive and remove especially as a cause.

     If it does not, then thanks for posting any repetitive error message in Event Viewer on startup (Start / Control Panel / administrative tools / event viewer - type eventvwr and enter, if do it from the command prompt).  Here's how to use Event Viewer: http://www.bleepingcomputer.com/forums/topic40108.html.

     I hope this helps.  Post back the results of the analysis and attempts to repair if these do not work.

     Good luck! Lorien - a - MCSE/MCSA/network + / A +.