Satellite 1110-Z12: CD-Rom drive will not play copy controlled CD

Hello

The CD-Rom drive in my Toshiba Satellite 1110-Z12 (bought 01/2003 in Holland) becomes completely unreadable when I insert a CD protected by "Controlled copy" (IFPI). And I mean, berserk, he upped power at an incredible speed of spinning - very strong - and afraid he will break down.

These are mainly EMI productions such as:
-Norah Jones: Feels Like Home
-Joss Stone: The soul Sessions.

I know that these copy protection systems can never break or damage the use on CD players (standalone or computer).

How can this be repaired? I never found the firmware update for the CD player on the Toshiba site.

As much as I m did know, is it possible that the General of music that are "Controlled copy" by IFPI do not work in the drive of your laptop.

Tags: Toshiba

Similar Questions

  • CD-ROM/DVD-rom drives will not play discs?... tried to be updated no joy... I tried the uninstall then re install just says code 39 error?. any suggestions?

    CD-ROM/DVD-rom drives will not play discs?... tried to be updated no joy... I tried the uninstall then re install just says code 39 error?. any suggestions?

    Try following the steps under "Windows XP" in the article following the MS KB:

    http://support.Microsoft.com/kb/982116

    These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.

    Create a System Restore Point beforehand and restart the computer later.

  • External DELL GP60N USB DVDRW drive will not play DVD

    Hello

    I have a new Dell Inspiron 3531 with Windows 8.1.  The laptop came with an internal DVD/CD drive, so I bought a Dell GP60N external USB DVD - RW Drive.

    When I put a DVD in the drive that the laptop recognizes it is there, but will not play regardless of how I set the automatic run settings.

    I also searched drivers see if mine was outdated, but not found to contribute to the situation.

    Any help from the community will be greatly appreciated.

    Thank you

    Heath

    Default Windows can not decode DVD video, so you will need some reading software...

    Usually, when you buy a DVD player/burner, you get with it, WinDVD or PowerDVD software for video playback and some other software if the device may also burn discs... UNLESS the material was an OEM version, which normally does not come in a box like the commercial version, then you normally get nothing...

    So for now the easiest thing is to connect the drive to the laptop and then insert a DVD into the drive. Go to the Explorer, and then right-click the DVD by selecting drive open. You should now see two folders AUDIO_TS and VIDEO_TS. This indicates that Windows sees DVD disc material correctly and that he also sees the files in the DVD itself... Nothing wrong up to now...

    Now, go into the VIDEO_TS directory where you should see a bunch of files, a bunch of. BUP. IFO and. VOB files. The. VOB files contain the video code CSS while the. IFO files contain orders for DVD to play appropriate video channel (flow). Normally, the. IFO and. VOB files will have an affair with some reading software and double click on the VIDEO_TS. VOB file will launch the player. If the player is associated. Can manage files IFO CSS encoded DVD, playback will begin and you will hear the sound and see some video... If you have a drive associated with these types of files, usually autoplay will kick and the reading starts automatically on insertion of the DVD in your drive... But if you double-click and there is no software associated with this file extension, so there is no software associated with these files and you can't watch your DVD...

    But as mentioned, Windows does not capable by default DVD playback software, so you will need to install a DVD playback software... One solution is to contact the company (Dell?) who provided the external DVD player and ask them why you do not have the comercial DVD reading and DVD software of engraving that you expected would come with your hardware, they can predict it you if she should have come in your package, or they will tell you where you can download it from...

    If they won't help or they say it was hardware OEM and that it did not come with software, then consider using VLC to play your videos, as the software is free open source of quality. This page explains how to use VLC to play DVDs in Windows 8... You can also use ImgBurn for burning CDs and DVDs (not blindly just click on the buttons of large download on this web site because they are advertisements for * you need not, simply the page to the section of news where you have a download link)...

  • Satellite M30X: DVD/CD rom drive does not work

    Hello
    I hope someone can help. The reader above will not now recognize any media inserted. He snores for awhile then stops. I cleaned the lens and cross also support and diagnostic tests and they cannot me more help.

    I also reinstalled the driver but no joy.
    This means a new DVD/cd drive is necessary?
    It is removable of the laptop and easily replaceable?
    Where I would get the part - M * a DVD ROM UJ-82OS?

    How much would it cost?

    Thank you all for your suggestions?

    Jim

    This looks like a simple material defect
    So what is the solution? I do think that a replacement device

    I think that different readers are compatible with this laptop. So I can t give you and advice how much it costs but the best answer you'll get the Toshiba service partner in your country

    But the slim laptop drives are usually a little more expensive than shared drives for desktop computers

  • Satellite L40 - 139 - CD-ROM drive does not

    My CD drive does not appear in my computer and when I use the Device Manager I see a yellow box with an exclamation point get this message when I go to its properties
    Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

    -What this means and how can it be solved?

    I think this question has been asked 100 times in the last two months and you can find the answer in two minutes only by using advanced search option.

    But once again for you - http://aps2.toshiba-tro.de/kb0/FAQ8101LA0000R01.htm

    Good luck!

  • Satellite M40-145: CD/DVD player will not play some DVD

    Hello!

    I am the owner of a Satellite M40-145 bought a little over a year; DVD driver worked perfectly until three days ago, but today I discovered something... strange. Still, it reads the DVD business and burned the DVD + r, but apparently it does not read the DVD - r serious more. I tried with different DVD - Rs, I burned the same DVD player, without success; trying to access the DVD gives a message "insert the disk in drive D:".

    In this case, I'm talking about movies on DVD. Please tell me there is a way to fix this without sending the computer to the customer service...
    I wouldn't think he fell down a few days after the expiry date of the guarantee.

    Hello

    Well, you can try to remove the Device Manager order form.
    After restarting again the reader should be recognized again. Then, check if it is possible to read the DVD - R, CD.

    But the question sounds like a lens calibration error. If you use different media, the lens must be calibrated again. But if this procedure fails, the drive is not able to read or write the DVD for example.
    Unfortunately, in this case only the replacement of the drive will resolve this problem.

  • Satellite M35x-s349 - DVD-ROM drive read not

    I have a Satellite M35x-s349. I got it around late 2004.

    He has had this problem for a few months and I had submitted to not being able to read or write cd / dvd because I couldn't find my recovery disks. When the computer was planted I renewed my efforts, found, restored with the help of an external HD enclosure, backed up and restored my computer. It was working fine. I burned the CD and watched movies without problems for a few months.

    He has now stopped read any kind of cd yet. I put the small drive flashes next to my cursor. I hear movement inside (ROAR and the eye moving) but after about 20 seconds, he gave up and claims that there is no disc in the drive. I don't want to have to do a system restore, but I can't even read the restore disk to reinstall the driver. Are there any ideas on why this happens if not all the solutions? Any way to reinstall the driver online? I am a user of level intermediary model so I can understand most tech jargon you throw my way. I can usually solve my own problems, but this one seems hopeless.

    Any help is very appreciated.

    -Tom

    I agree with Akuma. If the bootable CD/DVD cannot be read by the player are probably defective.

    It's old notebook and you can find replacement on eBay.
    Change the record is not complicated and if you need help let us know.

  • Satellite L300-1CU-DVD-rom drive does not work in Win7

    Hello

    I have IMPROVED MY TOSHIBA Satellite L300-1CU FOR WIN 7 NOW cd rom (MAST * one UJ880AS DVD RAM) quit working. DRIVE USED DOOR OPEN WHEN I CLICK ON THE DRIVE IN EXPLORER (DVD RW drive (D :)) MESSAGE SAYS "PLEASE INSERT a DISK INTO DRIVE D:" what I'VE DONE.))

    I DELETE THE UPPER & LOWER EDITORS IN THE REGISTRY AND UNINSTALLED THE DRIVER DVD AND STARTED RE! NOTHING HAS WORKED, PLEASE COULD YOU HELP?

    SO THAT THE UPGRADE OF THE SYSTEM OF THE UNITED NATIONS INSTALLED TO VARIOUS PROGRAMS OF TOSHIBA... !

    Did you upgrade using the Toshiba upgrade kit or you installed Win7 clean and clean installation?
    Can you confirm that the optical disc drive works well with factory settings (Vista preinstalled original)?

  • Satellite A660 - 11 M optical drive will not write to CD or DVD

    I got my A660 for about 9 months and it was burning without any problem but about a month ago, I tried to burn a DVD and the operation failed.

    Since then, I have tried a number of different CD & single layer / double layer DVD which all failed.

    I also ran the factory reset to recreate the image on the laptop, but the same problem persists.

    The drive seems to be written the drive normally until the end when it fails, then there is no visible trace on the disc and the machine will always be recognizes it as empty.

    There seems to be no problem in playing discs, just write down them.

    Does anyone know if there is an update of the firmware available for the reader?

    Which app to use for writing to the disc?

    To be honest I have think don firmware t update will change anything. I assume that there must be a problem with the calibration of the lens.

  • Samsung DVD - ROM SD - 616E driver will not play DVDs in Windows xp sp3 Home Edition

    Dear supporters, Im having problems playing movies on my Samsung DVD - ROM SD-616E installed on my Windows XP SP3 Home Edition Dell Dimension 2350..., a box of lil in the center of my watch windowsmedia player a message saying no compatible dvd decoder is not installed? Help, please? thanx.

    FWIW... Win XP cannot natively recognize Commercial
    DVD video... it requires a DVD decoder.

    If you could play before commercial video DVD...
    do a system restore to a time before this started
    may be your solution.

    Or you could buy a DVD decoder at the following link:

    (FWIW... it's always a good idea to create a system)
    Restore point before installing software or updates)

    Info about DVD decoders:
    Plug-ins for Windows Media Player
    http://Windows.Microsoft.com/en-us/Windows/downloads/Windows-Media-Player/plug-ins

    Or you can download and use one of the following freeware
    media players:

    VLC Media Player
    http://www.filehippo.com/download_vlc/
    (works on XP/Vista/7)

    Media Player Classic Home Cinema
    http://MajorGeeks.com/Media_Player_Classic_Home_Cinema_d6213.html
    (works on XP/Vista/7)

    Or... you can try to download and install one of the
    Following codec packs.

    (FWIW... it is always preferable, if you create a system restore
    point before installing any software or updates).

    * Proceed at your own risk *.

    (1) K-Lite Codec Pack (full)
    http://www.filehippo.com/download_klite_codec_pack/

    (2) information on CCCP (combined Community Codec Pack)
    http://www.CCCP-project.NET/wiki/index.php?title=Main_Page

    Good luck...

  • DVD / CD-Rom drive will not read disks.

    I don't know if it's a hardware problem or a software problem.

    When I put a disc in, it runs for 1-2 seconds, stops, turns for 1-2 seconds, stops, turns for like 1-2 seconds, stops (model repeats 3 times at once) and then silence.

    After trying several times to put in and taking the disc, it runs at full speed and I knew that it is a success that it's reading the disc to replay the video. But why it fails then back working again constantly. Solution?

    Also, when my computer is in "sleep" and I wake up, disk she could read his way 'sleep' cannot be detected anymore. Solution?

    The drive model is HP DVD Ram UJ8A2.

    I tried all the solutions software. None of them worked. I have actually used a piece of tissue paper to gently clean the DVD / CD lens a few times and now it works fine. I think the lens must attend a gentle cleaning. Resolved issues.

  • Satellite Pro A100: CD/DVD player will not play the audio CD or video DVD

    People,
    I have a Satellite Pro A100, with a RUG * a DVD-RAM UJ - 841 S Drive.
    It will read fine data disks, but refuses to play with the audio CD or video DVD.

    I tried to uninstall & Re-Installing DVD - RAM Driver;
    That got rid of the "IO error" that I received, unfortunately I don't notice the full error: S.
    He now just doesn't see the drive. Someone at - it ideas?

    I did a full windows update, and the Toshiba Diagnostic util tell me anything useful except "Fail" :(

    I found a thread in this forum that describes a similar theme:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=19747&MessageID=72404

    Sometimes this error is displayed because the player does not support the environment.
    Always it is every way is supported by readers and I think that in the user manual, you will find an index CDs or DVDs compatible

    Maybe the drive is defective and can not calibrate lens in the right position.
    But this laptop is not very old, and I can't imagine that the drive is defective
    However, nothing is impossible.

    What you can do is to carefully clean the lens and see that it will help.

  • Satellite A100 - video clips of TV will not play

    I can't see the video clips TV on my Toshiba Satellite A100 laptop, they just won't play.

    Any suggetions which part is missing please?

    Thank you very much BRIJOY

    Hello

    I think you should give us more details and explain the situation better.

    What OS do you have?
    What you mean with the video clips TV? Do you mean videos on YouTube for example, or videos stored on your computer?
    Which player do you use?

    If you want to watch videos on your computer, you should try another player. I prefer VLC media player. It can play audio and video files more.
    Check it!

    Good bye

  • Re: Blu Ray drive will not play Blu Ray

    Hello world

    I bought a HP Pavilion Slimline s5395a, with a blu - ray player. However when I tried to play Harry Potter and the relics of death part 1 blu ray using HP mediasmart dvd, he came with a message saying you want to search for updates. If I pressed no or Yes, nothing happens. I also tried to reinstall it to no luck and go to the settings icon on the bottom of program updates, where there is a critical update available, but nothing happens when I try to download it. Hope you can help me with this.

    Thanks, Luke

    Hi Luke,.

    This assumes that you are running Windows 7.

    Download and install Revo Uninstaller from the link below.

    http://www.revouninstaller.com/download-freeware-version.php

    Run revo and use it to uninstall your HP MediaSmart DVD software.  Make a right click on the program icon you want to remove and select uninstall.  During the process, that you may be asked to remove the registry entries, simply select all and then click on remove.  Do the same for any left over files and folders.  Once the uninstall is complete, reboot the PC.

    Then, download the latest installer for MediaSmart DVD on the link below and save it to your desktop.

    FTP://ftp.HP.com/pub/SoftPaq/sp50501-51000/sp50935.exe

    If you do not have an extraction utility installed, download and install 7-Zip.  Right click on the installation program you download, select Extract 7 - Zip, select the files, and then click Ok.  Open the newly extracted folder, open src and scroll down until you see the application setup ( 6th in the background with a size of 310 KB ).  This Application Configuration right click and select "Run as Administrator" to launch the installation.  Once the installation is complete, restart the computer and see if you can now read your Blu - ray discs.

    Kind regards

    DP - K

  • ThrustMaster driver on the internet will not play

    driver will not play iam get blinking green light help please

    We are not in a position to help unless you help by providing us with as much information as possible.

    Suggestions for asking for help on a site.

    http://support.Microsoft.com/kb/555375

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/what-information-to-post-in-the-Windows-Update/1467f44b-ee27-4F7D-98d7-f1c4b35b3395

    http://www.CatB.org/~ESR/FAQs/smart-questions.html

Maybe you are looking for

  • Can't play DVDs on flea market M300? I need drivers?

    I know that user: RachelClark has already posted on the same problem, but I want to know if rachelclark or everyone has understood, why I can't play DVDs on my portege M300? I need drivers? If yes where can I get them? any help/advice would be apprec

  • Length of the cable antenna WAP200E

    Does anyone know the maximum length of the cable rg-58 50 ohm for a WAP 200 E for an antenna HGA9N? I would use a length of 50-65 ft in the air. The room of 5 ' that comes with the antenna works well, something more provides no signal to the antenna

  • User account number

    I followed the instructions on a video on how to remove/delete and give permission to remove the back of the user. However, when I logged in as a guest, I change the Standard user account to administrator. I also changed the original file to c:/user/

  • Performance Windows 7 problem

  • New ssd format

    I have my windows 7 64-bit installed on a sad on my PC. I just installed a second ssd and it appears in disk management as expected. But I simply can't format. It starts, but I get an error message saying "Windows is unable to complete the format.".