The REEL with the right record length

Similar Questions

• Fetch the multi-record acquisitions takes too long

  Hello

  I need to improve the performance of my code in multi record acquisition on the following system.

  LabVIEW 2009, Niscope 3.5.2 map 5122 digitizer on the PXI-1042 with PXI-8106 controller connected to the host PC Dell Optiplex 380 with 4 GB of RAM by crossover cable.

  I tested the speed of transfer of my connection to the chassis using the niScope memory transfer Rate.vi Maximum flow, the result was 110,74 MB/s.

  I need to use the scanner to get the waveform of different seismic sensors and it should be as fast as possible to get different transducers in a reasonable time. I used the Multi files get VI to monitor the rate at which the code executes. I want to acquire 30 signals with 10,000 record length to 100 MECH sampling rate. / s.

  Extraction of 30 records with 10 000 record length takes about 300 ms, that is far too long for my experience. I tried different numbers Records and found that the code takes 10 milliseconds per registration type. I've found that extraction vi takes most of the time. I ran my code both recording Multi search vi. Two sleeves at the rate which is not satisfactory for my application. I appreciate if someone can help me solve the problem.

  Thank you

  Ahmad

  .

  I found that on the pulse generator FRP was set at 100 Hz, which means it sends the impulse evey 1/100 sec or each 10 m I think the program was waiting to acquire the signal. I changed the FRP at 1 K Hz, it became much more quickly.

  Thank you

  Ahmad

• How to record only recently added to the elements of the list on the right

  Dear Sir
  
  I have a shuttle with left and right bean drags lists.
  At some point I save the right drag the contents of the list to DB. Then I add additional items to the list on the right. Trying to save again I give oracle.jbo.TooManyObjectsException: Houston-25013: too many objects correspond to the primary key oracle.jbo.Key
  exception.
  What is the approach that I take only save newly added items from the shuttle?
  I wonder if I can put the additional logic (what logic that would I need to check the value PK that is already in the database?) in the method AM with which I save the shuttle like here (TicketID and ResponsibilityID are the primary key)
  ...
  If (items! = null)
  {
  Object [AI] = items.toArray ();
  for (int i = 1; i < ia.length; i ++)
  {
  Line rowApproval = vo.createRow ();
  vo.insertRow (rowApproval);
  rowApproval.setNewRowState (Row.STATUS_INITIALIZED);
  Line = vo.getCurrentRow ();
  row.setAttribute ("TicketId", items.get (0));
  row.setAttribute ("ResponsibilityId", items.get (i));
  row.setAttribute ("Status", items.get (i));
  }
  
  or do I have to do something in the OS?
  
  Thank you
  
  Anatoliy

  Hello

  Can you please clarify - do I have to make a loop? I mean for every record/element in the trailing list
  I run the VO (that I will create) VO.executeQuery?
  

  Yes, you do want to run the VO for each record... passing the different parameter at each iteration.

  Kind regards
  GYAN

• Help, please! Problem with QuickTime audio recording of the iPod?

  Before you start: I one day 32 GB 6th gen (newest) iPod Touch and uses a MacBook Pro with OS X Yosemite 10.10.5 early 2015. QuickTime Player is Version 10.4 (833.7).

  I have an iOS game and you want to record a video of my game using QuickTime. I want to record is just two things: the screen of my iPod (to show the gameplay of course) and iPod audio (to listen to the music of the gameplay, sound effects, etc.). I play with headphones plugged into my iPod, so, naturally, I want to listen to the game and have the video recording, the audio of game as well.

  Unfortunately, a problem arises however. I insert my iPod in my computer, ready to start game and the headphones plugged into the iPod. I open QuickTime, then click on "file > new Movie Recording. From the drop-down list next to the button REC / I click on "camera > iPod of [my] Touch" and "micro >" of [my] iPod Touch '.» Immediately I can't hear my headphones... ! However the emulation screen iPod appears perfectly on my MacBook.

  If I press the record button when even just to see what happens. I recorded about 20 seconds of the game and click on stop. Pretty funny his returned to my headphones right when I stopped recording! Nevertheless, I plugged my iPod headphones on my MacBook and played the video I just recorded. The 20-second video has audio PERFECT, everything in the video went extremely smooth and no audio/visual of all issues.

  I wanted to keep trying, then instead of having already my headphones for my iPod, I tried to open QuickTime with my headphones unplugged; and then plugged my iPod after QT has been opened. The emulation screen FROZEN unlock and then when I unplugged the headphones. Unplug and plug in any again gave the same results. I waited a few minutes later headphones, then plugged back in. Surprisingly, I could finally hear audio and emulation of the screen has not frozen, but when I pressed on the record, the record got stuck on "0:00"- and when I pressed the stop button, it gave me an error message saying "unable to save" try save again. " I tried everything several times for a few hours and nothing has changed. Is there something I'm missing... ?

  (TL; DR) so I have to ask. Why play video recording of my iPod QuickTime audio perfectly, but when recording, I don't hear any audio through the headphones of my iPod at all? Audio output when recording is stopped.

  Sorry for the long message and thank you very much for reading and any help!

  Why play video recording of my iPod QuickTime audio perfectly, but when recording, I don't hear any audio through the headphones of my iPod at all? Audio output when recording is stopped.

  Your recording QT X settings say the iPod Touch to divert temporarily the iPod Touch audio pipeline (normally sent to the internal speaker/headphone port) to the Lightning-USB connector to connect to the application of QT X reader when recording. When the registration process is complete, the iPod Touch will automatically reconnect the audio pipeline diverted to the internal speaker/headphone port.

  

• Burning a cd picture with photos in the right order

  I'm trying to burn a cd of photos using Windows Live Photo Gallery. I have no problem with the actual combustion, however they do not come out in the order I want what they. The record, that I choose to burn is in the right order by date, time, name, but one burned time and I play on my dvd player, they are not in the right order. How can I fix this?
  Thank you.

  I followed the instructions in the link you provided. Double checked them and they will be all renamed starting with the first image file Name.jpg according to numerical order, the 2nd picture of the group is the name of (1) .jpg file, 3rd picture is the name of the file (2) .jpg and so on. These were numbered automatically, but first of all, I made sure that they were displayed in the order that I wanted them. I have clicked on and highlight the first photo, press and hold the SHIFT key pressed, clicked on the last image in the file, once all selected / highlighted, right click on an image, choose 'RENAME', typed in the name of the file, press ENTER. The first image of thought would be (1), but was just .jpg and then all the other images were numbered. Have not had time to read everything in the directions of operation Panasonic Blu - ray, but see nothing on playback in random order for still images.

  =====================================
  If you are dialing as my example you will have better results.

  And no.... don't right click on 'everything' photo... the 'first' photo is
  one you want to right click on.

  If rename you batch and use the following number on the
  first file... the sequence should follow correctly when you press
  Come in...

  (10001) .jpg (you can enter a group name and a space
  before the number if you wish) summer vacation (10001) .jpg
  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• pen with the right button

  When I take the right-click/barrel-Elitepad 900 stylus button while clicking on the screen, it registers only as a standard left click.  In fact, I find no way to even check the barrel-button works.  I use it correctly?

  The stylus now seems (slightly) works correctly.  I don't know if it was the update of the firmware, or that I just realized it's very, very slow to respond.  If I deliberately pen tip firmly against the screen for a few seconds, the stylus (pen Executive HP) wakes up.  It seems to go to sleep again after a very short time.  Now if I do that first and then press and hold the barrel again before pressing the screen once more, it records the right-click correctly.

  I have to say it's the slower pen, that I never used.  I've owned two tablet PC (a Lenovo and HP one) I used frequently to annotate pdf documents. This pen is so slow that it is impossible to write with it, even if I try to write very slowly.  Unfortunately, I see now that there are a lot of other similar complaints, so it doesn't seem to be an issue with my pen Executive Elitepad/HP.

• Accidentally, I bought the Mac in December and contacted support which helped me to get the right version installed, but now the PC version is not in my account downloads and I need to add it to a new computer. I don't know how to get help with this.

  Accidentally, I bought the Mac in December and contacted support which helped me to get the right version installed, but now the PC version is not in my account downloads and I need to add it to a new computer. I don't know how to get help with this. I don't remember how I got the PC version, I think I have access to my computer remotely and she sent, but I can't find any record of it.

  Since this is an open forum, not Adobe support... you must contact Adobe personnel to help
  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)

  Creative cloud support (all creative cloud customer service problems)
  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• conversion of WMVs exported from the WebEx recording Editor, will hurt video encodes with SOUL 5.5 and 6

  I need to convert WMV files (which were created using Cisco WebEx recording Editor tool) to the h.264 format. This tool of the registration editor is the only tool that can get stuff on the native format of recording (.wrf) WebEx to WebEx meetings record that literally nothing includes. So I'm stuck with this WMV. That WMV has some odd properties. Media Encoder signals the WMV like 1680 x 1050 (1.0) 5 fps, unknown mono, 8 kHz,

  When I try to convert the WMV to MP4, the video becomes black during a long period beginning just around a point where the image has changed on the screen. I tried a lot of output parameters that are different including cadence mapping, and the use of standard frame rates and a quick attempt with CS6 CS5.5 and nothing helped.

  For what it's worth, I tried to download the trial of episode 6 and threw in that and claimed a h264 and he says, she does not have the decoder. But I'm not sure that the demo version of Telestream Episode opens WMVs.

  Someone out there has already solved this problem or got any ideas for replacing encoders that may well face WMVs is not quite compatible?

  Shayne - Weyker

  I found the solution. WebEx recording Editor allows you to choose from two different flavors of WMV9 to export to. And it is unclear that have selected it (I think that by default is bad) unless you open the menu drop down and watch because it truncates the name of the selected codec. The choices are

  Windows Media Video 9 Screen (BAD, problems of conversion)

  Windows Media Video 9 (good)

  Choose the right choice and export the WMV and then you can convert with Media Encoder.

• How to use the command the reel with Bind Variables

  For the next REEL, I want the GEN_DATE to be entered by the user at the time of execution of the SQL Script. Is this possible in the command of the COIL.
  
  
  the colsep value,-separate the columns with a comma
  set pagesize 1000 - get rid of disturbing - between pages
  set position-the title of column Print
  Set trimspool on - remove the spaces to the right. eliminating spaces until eol
  set linesize 700 - line size should be the sum of the column width
  coil spool_results.csv
  SELECT *.
  OF GUI_SITE_JOURNAL
  WHERE GENDATE_ BETWEEN ' 2012-11-01 00:00:00:00000' AND ' 2012 - 11 - 02 00:00:00:00000'* ORDER BY GEN_DATE;
  spool off;
  
  The reason is to give the opportunity to the user so that he can enter any beach without changing the code of the script.
  
  Can someone help me please.
  
  Published by: user10903866 on February 18, 2013 19:44

  Hello

  user10903866 wrote:
  For the next REEL, I want the GEN_DATE to be entered by the user at the time of execution of the SQL Script. Is this possible in the command of the COIL.

  Do you want user input in the command of the COIL, or want you she in the query?

  the colsep value,-separate the columns with a comma
  set pagesize 1000 - get rid of disturbing - between pages
  set position-the title of column Print
  Set trimspool on - remove the spaces to the right. eliminating spaces until eol
  set linesize 700 - line size should be the sum of the column width
  coil spool_results.csv
  SELECT *.
  OF GUI_SITE_JOURNAL
  WHERE GENDATE_ BETWEEN ' 2012-11-01 00:00:00:00000' AND ' 2012 - 11 - 02 00:00:00:00000'* ORDER BY GEN_DATE;

  What are the data type gen_date of the oif?
  If it is a string, it is a big mistake. Information about the dates in the DATE columns belongs.
  If it's a DATE, so don't try to compare strings, such as "2012-11-01 00:00:00:00000'."

  spool off;

  The reason is to give the opportunity to the user so that he can enter any beach without changing the code of the script.

  Can someone help me please.

  One way to do that is with substitution variables:

  ...
  SET     VERIFY  OFF
  
  ACCEPT  start_gen_date     PROMPT "Starting date (e.g., 2013-02-18 23:00:00.00000): "
  ACCEPT  end_gen_date     PROMPT "Ending date   (e.g., 2013-02-18 23:59:59.99999): "
  
  SPOOL  spool_results.csv
  
  SELECT    *
  FROM        gui_site_journal
  WHERE        gen_date  BETWEEN '&start_gen_date'
                  AND     '&end_gen_date'
  ORDER BY  gen_date;
  
  SPOOL  OFF
  

  There are security considerations. Variables substitution to the devious users the power to issue a SQL, such as DROP TABLE command. Users with SQL * Plus access already have this power, anyway.

• How to save a calendar I created with the photo and the dates recorded on separate pages?

  How to save a calendar I created in photoshop with the photo and the dates recorded in the form of two separate pages?  When I save in pdf or jpeg, they are automatically save 1 pg with dates and photos on a single page.  This is causing problems when I print.

  Hi there, in which case your printer is not very large, you can also trim down the two versions and print them as separate documents.

  (1) create a guide where you want to split the pages by clicking on the rule (hit control R if they are not displayed) and dragging to the desired location.

  Create the Guide to make it so be precise in the way which divide you your page, and so that no part of the image will be repeated or lost.

  

  (2) select the Cropping tool and adjust the area of culture at half top of your agenda, using the guide you have just made to align with the right place. Press return to complete the harvest.

  

  (3) go in file > save as the. Name the file something like calendar_top and select the desired file format. Press "Save".

  

  (4) once you return to your calendar file, go to the history Panel and select 'Guide to flirting This will bring you to step before you cropped the image.

  

  

  (5) repeat the steps as before to the bottom half of the schedule, once more, using the guide to help you make your growing area.

  

  

  

  Then you would just print each of the two pages individually. The images does not appear in a single document, but if you have Acrobat you could combine the files.

  I hope this helps!

• import with preset on the right codec

  hey im just a new and not very familiar with adobe products

  just to try, I got the demo version of cs5.5 (first pro)

  My problem is now I have now what predefined format I choose at the beginning of the creation of a project.

  my camera is the galxy s2 and I recorded in full HD with 1920 x 1080 at 30 images... what preset I must choose or is she not mather?

  I tried a few, but in some cases, it is verry big noise on the image in the preview window. in the media player (vlc player), he was not (maybe I might be because of my bad old pc with slow graphics card).

  hope you guys can help me and excuse my bad English German

  Thank you.

  When you create a new project you are presented

  with a setting of the sequence to the choice menu.

  You can skip this step by pressing "Cancel", then import your media

  and create the type of sequence that best adapts to your images.

  Try this:

  

  warning

  And to better understand what is happening, look at this:

  How to choose the right sequence settings?

• update with the duplicate record

  I'm working on my update page and I came across the problem where it allows to update the duplicate record. My code works for the second time when I tried to update the same name.
  
  For example, I have the user name A, B and C of the database.
  
  For the first time: update the username from B to A. This allowed me to do so given the A user name already in the table. (NOT RIGHT)
  
  Second step: update the C to A user name. He stopped me because of the duplicate record
  NOT QUITE RIGHT, IT SHOULD BE STOPPED ME FIRST?
  
  
  Thank you
  

  You should probably change the first query if a line with the same id is not considered:

  
  Select user_name
  users
  where trim (user_name) = ' #trim (form.user_name) #
  and user_id! = #user_id #.
  

  If all the rows are returned from get_dupecheck then you don't want to do the update.

• Does anyone else have a problem with the left speaker is much lower than the right?

  Any source that I use the left speaker is much lower than the left. If I put my finger on the right I can feel the pressure of air pushed but not by the left. Is it an iPhone defective 7?

  Hello, TopDog16!

  Welcome to congratulations on getting a new iPhone and Apple support communities 7.  From what I see in your post, you have any questions on the stereo speakers in your new iPhone.  I would be happy to help you with that!

  Indeed, your iPhone has holes on both right and left sides on the lower edge (on each side of the connector of the Lightning).  The holes on the right are only speaker on this edge of the phone, however.  The other speaker in the pair is at the top of the phone, where the cut is, just above the screen.  Check here to see if sound comes out.

  This page has a large diagram of the iPhone of 7 speakers (in the section entitled "Buttons and external connectors"): iPhone 7 - technical specifications

  Have a great rest of your week!

• I want to inhibit the launch of calendar app with a shot to the right of the screen.

  I want to inhibit the launch of calendar app with a shot to the right of the screen.

  I use my iPad to read, and drag to change pages drags the calendar to the irritating front... most!

  You can enable settings > general > multitasking > allow applications multiple 'off', which stops by scanning of the right border showing the other apps - you can just disable in iBooks

• When I click with the right button of the mouse on videos from facebook it shows no options for me to copy the link and etc.

  When I click with the right button of the mouse on videos from facebook it shows no options for me to copy the link and etc. It only shows the parameters for the flash player. How can I fix?

  You can find the URL of the thumbnail by following these steps:
  In the context menu, choose {inspect element}.
  Now, you can see the URL in the source down (perhaps you click the small arrow to the left of the line of seledted firstly to show).