The rule element attribute value

Similar Questions

• Workflow runtime do not receive updated the configuration element attribute value

  I added an attribute called "maintenanceMode.  At the beginning of the launch of a workflow I find the value of this (it's a Boolean value) and if it is set to true, the workflow sleeps for 5 minutes then wakes up and checks that the value again.  If it is false then the workflow must run the rest of the run.  The problem I have is that the workflow does not seem to raise the value of the attribute as it was during execution.  If I change the value that I do it manually does not seem to pick up the change.  Is there a discount of some sort I require before you archive it to clear any cached value?

  Paul

  To attract the attention of Paul on this post.

• LOVs using cascading on the Page elements with values exceeding 4000 characters

  A few days ago, I asked a question on the community, but it turned out that there was something wrong with my account and they have removed the item, so I'll just post the solution I found here now:

  Well, I found a way to use LOVs cascading on page elements with values exceeding 4000 characters:

  Let's say I have a shuttle named P1_ORGANISATIE with "List of values" box, a dynamic LOV named "Source: lists of values Query" containing the value:

  Select NAAM as display_value, ID like return_value

  of NINEHAM

  order by 1

  If the number of records-NINEHAM is insufficient, the length of the value of P1_ORGANISATIE, which is a list of concatenated with colon separated digital ID, can exceed 4000 characters.

  Now, suppose I have a list of selection called P1_TEST that is connected through "List of values"-> "Cascading LOV Parent article (s)" with P1_ORGANISATIE, using a named LOV dynamic with "Source: lists of values Query" containing:

  Select distinct TST. NAAM as display_value, TST.ID as return_value

  of the OTE NINEHAM

  Join the AFDELINGEN ADG ON (ADG. OTE_ID = OTE.ID)

  Join the DEELNEMERS DNR ON (DNR. ADG_ID = ADG.ID)

  Join TESTDEELNEMERS TDR WE (TDR. DNR_ID = DNR.ID)

  Join TESTEN TST ON (TST.ID = RDT. TST_ID)

  where instr (":" |: P1_ORGANISATIE |) '':'', '':'' || OTE.ID | :'') > 0

  order by 1

  In this case, when P1_ORGANISATIE exceeds 3998 characters, you'll get an "ORA-01704: string literal too long"-error and the P1_TEST will show an element called "undefined".

  A way around this is possible because for a named LOV, you can use a "function that returns a sql query" instead of a simple sql query. In other words, we can apply in the context of PL/SQL and thus have maximum for expressions of 32767 instead of 4000 characters. In addition, it is possible to use the two APEX_UTIL. STRING_TO_TABLE and APEX_COLLECTION.

  Setting "Source: lists of query values" on the LOV appointed to P1_TEST with the following code will work:

  DECLARE

  l_selected APEX_APPLICATION_GLOBAL. VC_ARR2;

  l_qry varchar2 (32767): =.

  "Select distinct TST. NAAM as display_value, TST.ID as return_value

  of the OTE NINEHAM

  Join the AFDELINGEN ADG ON (ADG. OTE_ID = OTE.ID)

  Join the DEELNEMERS DNR ON (DNR. ADG_ID = ADG.ID)

  Join TESTDEELNEMERS TDR WE (TDR. DNR_ID = DNR.ID)

  Join TESTEN TST ON (TST.ID = RDT. TST_ID)

  $1

  order by 1';

  BEGIN

  IF: P1_ORGANISATIE IS NULL

  OR LENGTH(:P1_ORGANISATIE) < = 4000

  THEN RETURN

  Replace (l_qry

  ,'$1'

  ,' where instr (":" |: P1_ORGANISATIE |) '':'', '':'' || OTE.ID | :'') > 0'

  );

  ON THE OTHER

  l_selected: = APEX_UTIL. STRING_TO_TABLE(:P1_ORGANISATIE);

  APEX_COLLECTION. CREATE_OR_TRUNCATE_COLLECTION (p_collection_name = > 'ORGANISATIE_COLLECTIE');

  FOR id IN 1.l_selected.count

  LOOP

  APEX_COLLECTION.add_member (p_collection_name = > 'ORGANISATIE_COLLECTIE')

  , p_n001 = > to_number (l_selected (id))

  );

  END LOOP;

  RETURN

  Replace (l_qry

  ,'$1'

  ,'join apex_collections ON APC (APC. COLLECTION_NAME = "ORGANISATIE_COLLECTIE" AND APC. N001 = OTE.ID)"

  );

  END IF;

  END;

  Andreas Groenevelt says:

  A few days ago, I asked a question on the community, but it turned out that there was something wrong with my account and they have removed the item, so I'll just post the solution I found here now:

  Something was wrong with the whole site: AP invoice tolerance

  I don't post anything substantive until we find out what is happening.

• How to get the VO groovy attribute value?

  Hello world
  
  I have an ItemsVO (with an entity behind it), a CompaniesVO and BusinessVO. CompaniesVO is filtered by an ExecuteWithParams and has an attribute of type with this attribute, I can filter BusinessVO used as LOV in ItemsVO. How can I pass the value using a groovy expression in the accessor to view? Can I do this?
  
  Thanks in advance.

  Take a look at this blog post that has a similar use case:
  http://jobinesh.blogspot.com/2011/03/initializing-bind-variables-in-query.html

  Thank you
  Nini

• In the editor element name-value pairs

  I'll put up a datagrid control that must be, in some areas, an itemEditor displaying a combobox with the name/value pairs:

  < mx:DataGrid height = "100%" width = "100%" id = "dgTaxa" editable = "true" >
  < mx:columns >
  < mx:DataGridColumn headerText = "Codice" dataField = "taxonCode" width = "60" / >
  < mx:DataGridColumn id = "colFamily" headerText = "Famiglia" dataField = "family" width = "80" >
  < mx:itemEditor >
  < fx:Component >
  
  < mx:ComboBox width = '80' labelField = dataProvider = "{parentDocument.families"familyId"}" > "
  
  < / mx:ComboBox >
  < / fx:Component >
  
  < / mx:itemEditor >
  < / mx:DataGridColumn >
  < / mx:columns >
  < / mx:DataGrid >

  This combobox has a dataprovider, it is this one:

  [Bindable]
  public var family: ArrayCollection = new ArrayCollection([) collection
  {familyId:1, name: 'cactacee'},
  {familyId:2, name: 'Lily'}
  ]);

  My problem is that I want to display name as labels of the combobox, but get familyId as combobox values to send to the Web service.

  Nobody knows how to help me?

  Thank you

  Paolo

  LabelField value = "name" and get the selectedItem.familyId

• How to get the rule metric count value into the FMS for the use of the dashboard?

  Hello

  In the FMS, I can see the results of rule firings in the FxV on the left side under end user-> FxV-> FxV Hit filters, but I'm not finding the same on the right under the data tab panel.

  I wish I could view 503 errror detected by a rule on the detectred FxV or errors of the FxM.

  Is this feasible?

  Thank you

  "mark".

  Try to do the following: Navigate to the dashboard which has the metric you want to and then open the right panel and create the new dashboard, then choose to base it on the current dashboard, it should give you access to data that was used for the original dashboard.

  

  Golan

• Get separate paths and the depth attribute value using the XQuery function

  Hi otn.
  I want to write the function XQuery that accept the following input document nodes.
  
  < counter Root = "8" >
  < has counter = "3" >
  < meter B '2' = >
  < C meter = "1" >
  < meter D = "1" / >
  / < C >
  < /B >
  < C meter = "2" >
  < counter E = "1" / >
  / < C >
  < /A >
  < meter B = "4" >
  < C meter = "3" / >
  < /B >
  < C meter = "6" >
  < counter E = "3" / >
  < counter D '2' = >
  < counter E = "1" / >
  / < d: >
  / < C >
  < meter D = "2" / >
  < counter E = "4" >
  < counter F = "1" / >
  < /E >
  < counter F = "1" / >
  < / root >
  
  Then returns many things at the same time as follows:
  1 - list of all of the separate paths
  2 - meter of the depth of each path element attribute value
  3 - the value of the previous counter in 2, is divided by the value of the attribute root counter.
  
  Thanks in advance :)))

  I'm sorry that not all xml input data correctly.

  You must use the {code} tag to enclose the code snippets. Formatting will be preserved and content not interpreted by the forum software.

  Here's an XQuery query that should work:

  declare function local:list-paths($d as element())
  as element()*
  {
    let $root := name($d)
    let $rootcnt := xs:integer($d/@counter)
    for $i in $d/descendant::*
    return element path
    {
      attribute value {
        substring-after(
          string-join(
            for $j in $i/ancestor-or-self::*
            return name($j)
          , "/"
          )
        , $root
        )
      }
    , attribute counter {$i/@counter}
    , attribute percentage {xs:integer($i/@counter) div $rootcnt}
    }
  };
  

• When you change an item type only display in hidden element its value changes from any value in value null. Why?

  
  Dear reading

  When to change a display one item type in the hidden element its value changes from null value any value . Why?

  I would like to use the result of the query in the hidden item, as well as to display it in report footer.

  shortly the displayed element can read footer bu area hidden point cannot be viewved in the footer box. Why?

  footer

  & P11_DISPLAY_ONLY_ITEM.

  footer

  & P11_HIDDEN_ITEM.  )

  (site of apex.oracle.com Application Express 4.2.5.00.08)

  concerning

  Enformatik wrote:

  in the part of the properties point setting its source type as query retune unique value;

  but when you set its value to the calculation (before header) it works correctly.

  It is the expected behavior. The values defined in the properties of the Source element / by default are only put in the controls of the page displayed in the browser, not in session state. To refer to a session-state item value (as in a & P11_HIDDEN_ITEM. substitution of static text) then the value must be set in session state in a calculation or process that runs before the substitution reference is returned.

  Setting the value using a calculation is the right way to do it.

• OIM11g: Event Notification, before and after the data elements

  Hello
  
  I have several notification events currently working properly. I would, however, create a new event notification containing the front and after the a modified attribute value.
  
  For example: If the user's e-mail address changes, the notification should be similar to:
  
  It is a notification that your email address has been updated correctly in the system. Old value: [email protected] new value: [email protected].
  
  Notifications appear to not be pulled as handlers process events, process tasks and scheduled tasks, is it possible to have both the front and after the data sets available for notification of each of these tasks?
  
  Thank you.

  If it's on a field of the user object, you can check if the attribute you are looking at is contained in the orchestration.getParameters (). If it is found, you can remove the old value out of the following:

  HashMap eventDataHashMap = orchestration.getInterEventData ();
  Identity currentUserState = eventDataHashMap.get ("CURRENT_USER") (identity);

  Then you can generate the notification by email/but you want to.

  -Kevin

• Select xml Noah attribute values

  I am trying to select the format of attribute value the xmltype column, I copied the xml data that contains the xmltype column.
  my select statement is this, I get value in the main_entry and in the fields of the case, but the field entity_id and entity_person is null.
  What I am doing wrong?
  
  
  SELECT extractvalue(COL1,'//MAIN-ENTRY') as main_entry,
  ExtractValue (col1, '//case-NUMBER') case,
  ExtractValue (col1, '//record/Data/suspect/Role-of-person-Reference/person/ @ID') AS entity_id
  ExtractValue (col1, '//record/Data/suspect/Role-of-person-Reference/person/ @Entity-PERSON') AS entity_person
  
  OF XML_TABLE;
  
  
  
  
  ACCOUNT <>
  < DATA >
  ENTRY <>555467782942 < / HAND-ENTRY >
  > < 1235467782942 CAS NUMBER < / CASE-NUMBER >
  LEXS < FILE TYPE > < / FOLDER-TYPE >
  < SUSPECT >
  < ROLE TO PERSON-REFERENCE >
  < entityType PERSON = 'ENTITY-PERSON' id '8817' = >
  < NAME of the PERSON - >
  < NAME-FULL-PERSON > EMIL SMITH < / FULL PERSON-NAME of the >
  < / NAMES of PERSONS >
  < PERSON-SSN-ID > < identification ID > 220 - 44 - 555 < / IDENTIFICATION ID >
  < / PERSON-SSN-IDENTIFICATION >
  < / PERSON >
  < / ROLE TO PERSON-REFERENCE >
  < / SUSPECT >
  < / DATA >
  < / RECORDING >

  Try this.

  
  
    555467782942
    1235467782942
    LEXS
  
    
       
       
           EMIL SMITH
       
           220-44-555
     
   
  
  
  
  
  

  Select extractvalue(COL1,'/RECORD/DATA/SUSPECT/ROLE-OF-PERSON-REFERENCE/PERSON/@entityType') IN the entity_person
  of xml_table

  Published by: alvinder on April 2, 2009 06:32

  Will get back to you as soon as I'm on my computer.

• Cannot set attribute of the param element value using javascript in setAttribute

  When adding the items param via createFragment the javascript in setAttribute function does not set the "value" attribute It is necessary to set the nodetext to add this attribute to the value of the param element.

  Second, when using the method of the generated html code defines the 'value' to the innerHTML. HTML code resulting in the display by "Inspect the system" looks like this.

  < parameter id = "myID" > myValue < / param >

  Note: [the element close text < / param > is displayed correctly using inspect, but when using file-> SavePageAs the end text is not saved correctly.] I reported this in another question of moz. support FF.]

  function setparamAttrs (parmID, parmVal)
  {

  var gData = document.createDocumentFragment();
  

   var newNode = document.createElement("param");
   var textStr = document.createTextNode(parmVal);
   newNode.appendChild(textStr);
  

   newNode.setAttribute("id", parmID);
   //newNode.setAttribute("value", parmVal);  // this does not work
   //newNode.setAttribute("innerHTML", parmVal);  //this does not work
  

   gData.appendChild(newNode);
   document.body.appendChild(gData);
  

  }

  However, I was able to retrieve the "value", once it has been added using:

  var val = document.getElementById("parm0").value;)

  getAttribute ("value") does not work either.

  Finally, I added the param elements to my HTML code like this.
  < parameter id = "myID" > myValue < / param >. Then I tried to extract the value using document.getElementById("myID").innerHTML. No text has been returned. When I looked at the HTML document with inspect my HTML param element is displayed as < param id = "myID" > myVal. The closing text of the element has not the same when I use SavePageAs which I mentioned previously.

  Yes, this is the correct way to this code and it works for me without any problem.

• The value "en - 029" attribute "language" in the "assemblyIdentity" element is invalid.

  Hello

  For one of our localization project we added support for the English locale Caribbean(en-029) in our windows desktop application. Deploy us this application using click once. But after adding of these resource files click once deployment manifest, we get the following error when launching the application

  Activation context generation failed for "C:\Users\dmoghe\AppData\Local\Apps\2.0\7L743ZTV. "DLK\JGMO494T.40E\onli... tion_c8ea7f7184136a36_000e.0001_4b5ae982e9ff8201\OnlineAVL2.exe.manifest". Error in manifest or policy file "C:\Users\dmoghe\AppData\Local\Apps\2.0\7L743ZTV. "DLK\JGMO494T.40E\onli... tion_c8ea7f7184136a36_000e.0001_4b5ae982e9ff8201\OnlineAVL2.exe.manifest" line 395. The value "en - 029" attribute "language" in the "assemblyIdentity" element is invalid.

  Does the click once activation framework supports en-029 as an attribute to an assembly language or should I use another language?

  We are using .NET framework 2.0

  Please let me know.

  Hi Darshan,

  Thanks for posting your query in Microsoft Community Forum. However, the question you posted would be better suited in the TechNet Forums.

  I would recommend posting your query in the TechNet Forums :

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Thank you.

• The element of Interaction of the user does not correct my Boolean attribute value

  Hello

  I'm just starting using the element of User Interaction. In my workflow, I set several attributes - some string and a Boolean value. I have a script task that makes treatment and eventually set these attributes. I then a piece of User Interaction that has these characteristics than external contributions. The Interaction of the user unit shows the correct values to strings, but the Boolean value is always shown as wrong - regardless of what I put the attribute in the script task immediately preceding.

  I'm confused. I plugged everything in the binding in the same way, but it does not seem to reflect the State of the attribute. I can switch the Boolean value in the Interaction of the user and the attribute is replaced as expected.

  Thank you

  Edit: I have reproduced this issue with a very simple affair. Make a new workflow and put only a part of the Interaction of the user in it. In the UI element, create an external of entry as a Boolean attribute of the workflow. Default font to True/Yes. When you run the workflow, the user interface element shows the value as a no.?

  Hello

  Looks like a bug in the client Java vRO (but works in vSphere client to Web). I am able to reproduce it in my environment, on the two vRO 6.x and 7.0.

  I'll open a PR in order to track and remedy in the future vRO releases.

  BTW, I vaguely remember there is a reported similar problem long time for vCO 4.x. It seems that the problem has reappeared again in silence

• I am reorganizing the attribute value using javascript. see code below

  Hi all

  I am reorganizing the attribute value using javascript. see code below and suggest me
  

  EX: id = "to THE:1" reorganize to id = "to THE:2"

  myDoc var = app.activeDocument;

  var myGlueCodePath = app.filePath + "/ Scripts/XML rules/glue code.jsx";

  var myFile = File (myGlueCodePath);

  app.doScript (myFile);

  If (app.documents.length! = 0) {}

  var myRuleSet = new Array)

  new findObjAttribute ("//auq")

  );

  {with (MyDoc)}

  var elements = xmlElements;

  __processRuleSet (Elements.Item (0), myRuleSet);

  }

  }

  else {}

  Alert ("you have no open documents!");

  Exit();

  }

  function findObjAttribute() {}

  myIdName = "findObjAttribute";

  This.XPath = ("[/ / auq[@id]");

  This.Apply = function (myElement, myRuleProcessor)

  {

  elmName = myElement var .markupTag .name;

  {with (MyElement)}

  try {}

  var myAttName = myElement .xmlAttributes .itemByName ("id") .value;

  SS var = myAttName.replace(/[A-Z]+\:/,""); "

  var SSS = ss - 1;

  myAttName = myAttName.replace(/[0-9]/,sss)

  $.writeln (myAttName);

  } catch (e) {};

  }

  }

  }

  Your code re - order the value correctly, but you don't have the update attribute in the element.

  Try this,

  myAttName = myAttName.replace(/[0-9]/,sss);

  myElement.xmlAttributes.itemByName("id").value = myAttName;

• [ADF, JDev12.1.3] SelectOneChoiche created from VO instance with 3 fields: how to retrieve the value of all the fields of the selected element?

  Hallo,

  I defined a VO with 3 fields (A, B and C) and I would like to create a SelectOneChoiche that shows only the field as options from this instance of VO.

  In a managed bean, I need to retrieve the values for all areas (A, B and C) of the item selected by the user.

  I started dragging the entire VO instance to UI to create a SelectOneChoiche (in which I have chosen to show only the to field).

  Then, I created a for the SOC ValueChangeListener read the values A, B and C of the selected element, but the only thing I've done is to get the displayed value:

  System.out.println((String) ((RichSelectOneChoice) FacesUtils.findComponent("MySoc")).getValue());
  

  You kindly help me?

  Thank you

  Federico

  Federico, sorry I didn't see your answer.

  As you use 12.1.3 you can do this more easily than the code that I posted before. You can use

  {} public void onCountrySelection (ValueChangeEvent valueChangeEvent)

  FacesContext will involve = FacesContext.getCurrentInstance ();

  Make sure that the selection change is processed and the current link lov line has the new selected line

  valueChangeEvent.getComponent () .processUpdates (contxt);

  BindingContext lBindingContext = BindingContext.getCurrent ();

  BindingContainer lBindingContainer = lBindingContext.getCurrentBindingsEntry ();

  List JUCtrlListBinding = lBindingContainer.get ("CountryId") (JUCtrlListBinding);

  the newindex in not necessary, but ok let's get it (must be equal to the CountryId, the pharmacokinetics of the binding of the lov

  String newindex = (String) valueChangeEvent.getNewValue ();

  get the selected value in the list that is the selected line of the binding of the lov

  Line lFromList = list.getSelectedValue () (line);

  now, we can get the attributes of the line of lov

  String s = (String) lFromList.getAttribute ("CountryId");

  System.out.println ("CountryId:" + s);

  String s2 = (String) lFromList.getAttribute ("CountryName");

  System.out.println ("CountryName:" + s2);

  BigDecimal s3 = lFromList.getAttribute("RegionId") (BigDecimal);

  System.out.println ("RegionId:" + s3.toString ());

  }

  The form that I use is based on the location of the HR DB schema table. The CountryId is configured in the view object to display a lov based on the campagneVoir. This view contains thre CountryId, CountryName and RegionId attributes.

  If you want to get to the attributes of an action listener you can use this code

  {} public void onGetSelectedCountryLov (ActionEvent actionEvent)

  BindingContext lBindingContext = BindingContext.getCurrent ();

  BindingContainer lBindingContainer = lBindingContext.getCurrentBindingsEntry ();

  List JUCtrlListBinding = lBindingContainer.get ("CountryId") (JUCtrlListBinding);

  get the selected value in the list that is the selected line of the binding of the lov

  Line lFromList = list.getSelectedValue () (line);

  now, we can get the attributes of the line of lov

  String s = (String) lFromList.getAttribute ("CountryId");

  System.out.println ("CountryId:" + s);

  String s2 = (String) lFromList.getAttribute ("CountryName");

  System.out.println ("CountryName:" + s2);

  BigDecimal s3 = lFromList.getAttribute("RegionId") (BigDecimal);

  System.out.println ("RegionId:" + s3.toString ());

  }

  You must add the valueChangeListener and at least add the lines

  FacesContext will involve = FacesContext.getCurrentInstance ();

  Make sure that the selection change is processed and the current link lov line has the new selected line

  valueChangeEvent.getComponent () .processUpdates (contxt);

  to ensure that the selected line is available when you click the button.

  And set autosubmit'= true for the field in the UI that displays the LOV.

  Timo