The Sansa Clip firmware uninstall

Similar Questions

• Sansa clip firmware

  Hey!

  I just bought a sansa clip and let me know if the sansa clip firmware is the same as the sansa clip + a.

  Thank you!

  No - See the sticky thread above it (the video) forum for the firmware you need.

• The Sansa Clip - button / stop

  I think I have a similar problem to most of the people on this site, I have a sansa clip (2 GB) blue and the other day, that the girlfriend was listening, however, it turned off as usual but nevertheless I wanted to use it the next day, when I came to try to turn it on, but it would not accept.

  I tried all the options about resetting it, and also I have updated the firmware version I could access using the WEDGE + middle button Option while only connected via a USB cable. However, now that ive done it, im able to see the sansa clip as an element connected on the list 'my computer '. Everything I've had there been deleted. Then back to the factory settings.

  However when I have the camera connected to the computer and I'm going to turn off while its still connected, I can, and when I go to turn it back on again, it turns on.

  Its when I have the device disconnected from the computer and try the power button, it will not only she won't turn on and I thought it might be something to with me a fall, which, if I did, I don't remember because I the care normally in a safe place as I consider that my MP3 as my baby... lol.

  Anyway, hope you guys have a few suggestions that I'm totally distraught...

  Please get back to me as soon as POSSIBLE

  Thank you

  Concerning

  David

  Have you read the other threads on the same topic? If you are unable to turn on, you may need to get another, exchanging where you bought it, or have it replaced by SanDisk warranty.

  Insofar as all your music being gone, I doubt it. More likely is that in your update of the firmware, your device default to opposite USB mode you used to put the music on with. If you put the music in MSC mode, it does not display in MTP mode and vice versa. It is still there, but your computer only 'see' in the mode he was transferred in.

• Question on the sansa clip!

  The sansa clip there superscroll?

  Thank you

  SR

  SR - rox wrote:

  The sansa clip there superscroll?

  Thank you

  SR

  It don't you... Press the button, and it scrolls very fast.

• Windows 7 do not open the Sansa clip 2 GB

  Hello

  I have the Sansa clip 2 GB MP3 player. My Windows 7 detects it but do not open it. It is in the devices and printers, but is not in my computer. My laptop with Windows XP it opens but how to get to my files using Windows 7? And this is a problem with all the USB devices that I use in this computer.

  Can you help me?

  Thank you.

  Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should help

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/   (also works on Windows 8)

• Y at - he liked an update firmware for the sansa clip

  If I use the sansa updater it detects it as a normal element and gives me a firmware to install, one that ends in 32 I think, but if I install what I think ill ruin the clip, so I ask if a firmware update for the clip more were released, I got V01.01.05A firmware now

  No update firmware at the moment; you have the most recent.  If/when an update of the issues, it is likely is displayed as a sticky thread at the top of this forum.

• How to connect the sansa clip for PS3?

  Hello

  Is there a way to play music storge on my sansa with a PlayStation3 video?

  My sansa have the latest firmware and I have PS3 Slim.

  I tried to connect with USB. The PS3 shows the sansa, but it only shows the files, no files at all.

  Help, please.

  Try changing the clamp-Meteorological Service of Canada the USB mode.

  Moreover, if all the files have been transferred to the Clip in MTP mode, you may need to reload in MSC mode. I doubt that the PS3 can find files that have been loaded to MTP.

• Structure of the menu of the Sansa Clip +: change USB Mode no display

  Hey,.

  I have a Sansa Clip + with a display of death.

  I need to change the USB Mode of DPW, Meteorological Service of the Canada.

  Can someone please tell me the structure of the menu in order to change the USB Mode put down using the screen?

  Other clues would be appreciated.

  Thank you!

  I just found the solution:

  Sansa Clip +.
  1. turn off the device.
  2 press and hold the Center button while connecting the device to the computer.

  http://KB.SanDisk.com/app/answers/detail/A_ID/61/~/enabling-or-forcing-MSC-mode-on-your-Sansa-player

  So now I can install Rockbox and set up the clip + so that it displays all the entries menu...

• Computer does not display the Sansa Clip

  For about a week, my computer no longer displays my Sansa Clip when I plug upward with the USB cable. I can still hear the computer, the connection of detection, but it does not show in Windows Explorer, as before. I checked the setting on the clip and it sees - USB - Auto detection. If I change this meteorological service of the Canada, Windows Explorer displays the clip and folders, but the folders are empty. However, the files are still on the clip and play. Need to know what is happening, so I can add other files to my clip.

  Thanks for the inside. I just do what you say and everything works fine now. Thank you and Merry Christmas.

• audiobooks on the sansa clip +.

  I just got a sansa clip MP3 player +.  I joined audible.com and downloaded a book on my computer.  I thought that it was downloaded on my sansa.  Where are the files in the menu of the sansa?

  Help!  I'm not tech saavy.

  Have you used the Audible Download Manager?  I think that's the recommendation until the end of files in the Audible folder on the Clip + and show up under the music/Audiobooks section.

• What are the dimensions of the sansa clip 8 GB and 2 GB?

  Hello

  I would like to know if the 8 GB sansa clip is the same size as 2 GB clip. (the Player size)

  Thank you!

  All the Clips (1 GB, 2 GB, 4 GB and 8 GB) have the same dimensions.

• Stereo does not read the Sansa Clip after firmware update

  Hello

  I upgraded to the last 2.01.35a of the previous 32.

  Before that, my channel stereo would connect to the Clip and play songs using the USB connection, I can use the remote to change songs, now with the new update of the firmware it does not read the content of the Clip.  Clip said 'Connected', but the stereo repeat me 'Reading' forever.

  I came back to the previous version and it works again.

  Is there a problem with the latest version of the firmware?

  Also, since I was in Europe, Updater I updated the European version and this limited the volume a LOT.  So I downloaded the US version is now at normal volume.  The European version is too quiet and I can't hear a thing if there is a background noise. But still, the USB connection in the stereo works with version 2.01.32 and not 2.01.35.

  any ideas?

  Thank you.

  one.

  Hello

  I tried AutoDetect, MTP and MSC and none worked.

  Now everything works well again, and I will consider the reset factory settings to change the region for other times.

  Thank you.

• Play the Sansa Clip, and small stereo room

  I just got my Clip more today.  One of the things I wanted to really be able to do was play through the small stereo I have in my room.  I did a little research before you buy the video and found that what I had to do was to buy a cord that had the stereo mini plug plug at one end and two RCA plugs at the other end.

  I connected the Clip on my stereo in this way, ensuring that choose "line in" the energy input to the system, but in this stereo which, otherwise, has more volume I have ever NEEDED, I hear just whats playing in the Clip, even with the volume on the stereo completely maxed out and the choice of 'stronger' selected on in the clip.

  Any ideas?

  RandyMyers wrote:

  I just got my Clip more today.  One of the things I wanted to really be able to do was play through the small stereo I have in my room.  I did a little research before you buy the video and found that what I had to do was to buy a cord that had the stereo mini plug plug at one end and two RCA plugs at the other end.

  I connected the Clip on my stereo in this way, ensuring that choose "line in" the energy input to the system, but in this stereo which, otherwise, has more volume I have ever NEEDED, I hear just whats playing in the Clip, even with the volume on the stereo completely maxed out and the choice of 'stronger' selected on in the clip.

  Any ideas?

  The volume on the side of the clip must be turned up all the way, and the EQUALIZATION left on 'Normal' for a better result... but make sure that you turn the volume on your stereo first before you press play.

• How to get a list of all files/folders on the Sansa Clip +.

  Hello

  I have a lot of MP3s on my Clip +, but realize that I put there duplicates in different folders. My plan was to use a command prompt to get a list of all the files on the device, and then use a utility that shows me duplicate names and the locations of the files. I could then simply delete the Clip +.

  The problem, it is that the Clip + is simply presented as a 'portable' in Windows Explorer (Windows 7 Home) - there is no way to assign a drive letter :-( Which seems a bit odd, as it is, after all, plugged into one of my USB ports... I used the dir command on all drives assigned in my computer as "devices with removable storage". One of them must be the port to which the Clip + is attached, but they all say "device is not ready". So the Clip + is not identified in this way.

  Is it possible at all to get a list of the files that are on the Clip +?

  Thank you!

  That's how the Clip + shows when connected in USB MTP mode.  If you connect mode MSC (defined in the control panel), Clip + comes as a disk.

  But: the problem you have is, Windows displays only the files that have been transferred in the Clip + under USB mode then logged in as.  I don't know if this applies to designated offices, but - you could try and see.

  Another solution would be to copy all of your files on your computer, under MTP mode; Delete the files on the Clip +. move the Clip + mode MSC; and then transfer the files to the Clip +.  Now, you should be able to see the files under Windows (always connected in MSC mode) and can run the utilities that you had planned.

  I hope this helps.

• Sansa Clip: Loading screen saver: can manually enable us to extend the life of the screen?

  What charge the Sansa Clip: after an hour, the screen turns white (a screen saver, I guess).

  I would like to activate the screen saver immediately, to extend the duration of the display.  Is it possible to do?

  Or maybe in a version of firmware future, so a sequence button turn it on.

  Unless the life of the screen is much longer than the lifetime of the unit in general...

  Thanks for your time.

  As far as I know, you can't do it manually now.

  This is the reason why some people with an adapter for recharging: when charging via AC, the display shuts off after setting the time of the backlight of your display.

  Indeed, even if it bugs some of us, it is likely that display time of 1 hour during USB charging will not significantly affect the ultimate lifecycle of the screen, in the end; If I remember correctly, the screen has a life expectancy of 5000 hours or something like that (sorry, it's been a while) - it is 208 days of fulltime show all day/night long.  By the time you reach this point, probably, if ever, the battery life may have been reached, or you probably may have gone to another player, as technology improves over time.  But it's all unique to each user (if you are more rare than the user who guard 8 hours per day, life of the screen display will be reached about 1.7 years; if you use your player lot every day and are charging every day, charging via AC could save you 365 hours of projection of the time per year (, the equivalent of almost a month of 1.7 years screen time), and so you can recharge via AC just to cover as much as possible.  (More realistic, if your screen is on for 2 hours a day, which is still a lot, unless you really keep your screen on a lot, the screen should last for about 7 years or more - think where you will be and what technology you are using maybe at this time.)