Sansa clip firmware

Similar Questions

• The Sansa Clip firmware uninstall

  Hello

  Y at - it an option to uninstall the Sansa Clip firmware?

  I have firmware version 2.x.x.x. But I want to install the version of the frimware 1.x.x.x.

  Is this possible?

  Best regards

  Treqq

  Treqq wrote:

  Hello

  Y at - it an option to uninstall the Sansa Clip firmware?

  I have firmware version 2.x.x.x. But I want to install the version of the frimware 1.x.x.x.

  Is this possible?

  Best regards

  Treqq

  It is not possible.

• Sansa Clip CODEC used in original Firmware

  I want to know if sansa firmware using the mp3 decoder under license from Fraunhofer IIS, such as listed in the manual booklet.

  is this true?

  even with the iPod which using the same decoder...

  esgikey wrote:

  for as far as I know... quality of codec have an effect for sound quality produced by the device... the codec set the mapping of the frequency for each bit of data

  >

  No, this is not correct.  The choice of the decoder is not quality.  They all produce essentially the same result, without taking into account some rounding errors.  If you have a difference between the two firmwares, its probably not the codec.  Have you tried running RMAA to measure?

  esgikey wrote:

  so many people who, says codec BLADE are better than Fraunhofer IIS...

  Lame is typically used as an encoder, not a decoder.  It encodes more effectively files into MP3s, but that has nothing to do with actually reading a file.

  esgikey wrote:

  Oh there, when sansa will update its sansa Clip + firmware? the battery indicator is not linear measure, and I hope it will be fixed soon.

  My guess is that they will not update firmware Clip + still once.  But if the battery indicator is not linear that probably means that your battery is a little weird, and a software update is unlikely to fix it.

• Sansa Clip + starts charging fully charged once more again

  My Sansa Clip + has been completely cut and I plug it into the computer to charge it.

  He has been in charge for about 3 hours and the animated indicator said he was almost completely reloaded. I take a quick shower and when I came back, I noticed that the trial load has been started again. The indicator shows u completely discharged battery and charge process now...

  Bug is fixed in the new firmware! Sansa Clip + Firmware 01.02.09 update

  However, they say nothing about it in the notes, but it works for me!

• Sansa clip 2 GB trying to load but quit unexpectedly

  My Sansa Clip 2 GB begins to demand, but stops after about 20 seconds.  It remains always connected the rest empty battery icon.  For this reason, I can't keep the unit to perform all operations.  Help is appreciated.

  The problem was solved by Sandisk.  Their solution is shown below:

  If the player does not load, there may be more than one reason.

  First of all, your Sansa Mp3 player should be charged when connected to a computer that meets the system requirements:

  -Windows XP or Vista
  -Windows Media player 10 version 11 or

  Initial charge time is 3 to 4 hours. The State of the battery will be completely shaded when completely charged.

  Second, if your reader part or all memory is damaged, the player again to read the memory over and over again, so it drains the battery more quickly, to format your Sansa Mp3 player.

  Note: Set FORM WILL ERASE all DATA ON YOUR DEVICE. MAKE A BACKUP OF ALL YOUR FILES ON YOUR COMPUTER.

  1 turn off the player. You may need to slide up and hold the switch to completely turn off the player.
  2 Activate button (orange must be visible) and press on and hold the Center button while connecting the player to the computer. Don't let go no these key until you see connected status on the player.
  3. single right click workstation in your office. Choose 'Manage' in the menu. In simple window computer management - click on disk management in the left pane. Search for "Removable disk" icon with a drive letter in the right pane and right-click and select "Format".
  4 make sure these fields in the Format dialog box:

  System files = FAT32
  Quick format cannot be verified

  5. click on start. Confirm on the notification.

  6. test the device to transfer music to the player.

  Finally, this is due to the firmware corruption or failure. We need to upgrade the firmware of your player manually to delete this type of corruption.

  Sansa Clip Firmware download Update:

  1. turn off Mp3 player
  2 turn the unit on hold (move, hold down the button until it shows orange)
  3. press and hold the Center button
  4. connect the mini connector on the device (don't forget that the USB is connected to the computer)
  5. download and extract the .zip file to a folder on your desktop:

  Click here for the Sansa Clip Mp3 Player Firmware update file

  6. Once extracted, drag the file or copy the *. BIN file in the directory root of your Sansa Clip.
  7 disconnect the Sansa Clip and let it restart.
  8. the update of the firmware will now begin.
  9 once he finished finally make his update, it will start back upward. After his return to the main menu, go to 'Settings' > 'System Info' and check the 'Version' is now 01.01.30A.

  To completely register your product, please provide the following information:
  -What is the operating system running on your computer?
  -The computer make and model.

  You can also visit http://kb.sandisk.com, our keyword online searchable knowledge base questions, to easily find answers to your Technical Support and Service the customer for all SanDisk products. Simply enter your search terms and our knowledge base will search a vast database of frequently asked questions as well as our forums online at http://www.sandisk.com/forums for you to provide the most complete answers possible.

• Sansa Clip + Player ignores the titles with sound of frying after the last firmware update

  Hello

  My Sansa Clip + tracks audio playback stopped (same mp3 files it used to always play) after I updated to firmware 1.02.18A.

  The player jumps just all tracks with sound of frying one after the other.  No longer play.

  What's wrong??

  Is it possible to fix it?

  Is it possible to revert to the original firmware version 1.02.15 that worked well?

  Well,.

  I don't know what the problem actually was, but certainly it's associated BONE.
  I'm at home in my Windows 7 and everything works perfectly now.

  The problem I experienced was at work, where I have Windows XP SP3 OS.

  On Windows 7 home, I copy the MP3 files in MSC mode and don't play them no problem at all.

  Driver to work on Windows XP may be defective or unsuitable for copy files correctly on the drive using the MSC mode.

  I do not know. At least, everything works fine now.

  P.S. The funniest is that tech support lady told me that my drive is ruined and it is absolutely impossible to fix.

  She also said that it is impossible to install the previous version of firmware absolutelly and that it not there no previous version of the firmware available more she also said that the only way to "solve" the problem is for me to buy a new player

  Everything just great!

  Every1 thanks for your help.

• Sansa Clip 8 GB - Firmware Version 2.01.32 - all my files disappeared

  So, today I have updated the firmware on my Sansa Clip from 2.01.16 to 2.01.32 and now, therefore, when I connect my player to the PC any of my files stored on my drive are visible. I tried to use the options to display the hidden files and system files on my PC, but it does not work. All files are always visible and readable on my player, and my shows to PC where there is 5.58 GB of used space on my drive but when I search in the records of the player using my PC, they're all empty... not so much as a single byte in sight... What is going on? Where are my files stored now? (And especially) How can I access them through my PC?

  I read on a website that the deletion of the "MTABLE. SYS file' could solve this problem, but I have tried this 4 times now and the problem persists.

  A big thank you to all those who can help.

  Probably not a mistake but a MSC / outcome of the PSG. Go in the configuration of the element, and then select MTP. If still no files and select MSC.

  If still no removal follow the instructions in the FAQS on this site.

• I upgraded the firmware Sansa Clip & now I don't see the files I had previously in

  Hi guys, this is my problem: I have a sansa clip v2, it worked fine until yesterday, when I updated the firmware with sansa updater; the upgrade went smoothly, but now my windows xp sp3 detects the drive because it was a normal penstick/external hd and I cannot see the files I already had in it: I can still listen to their - players works as usual - but, as I don't see them, I can't delete them! I tried the "hidden and system files" in folder options, but it did not help. I think that after the upgrade of the internal structure of the file has changed a bit, now it is: sound, music, audio books, podcasts, record, WMPinfo.xml, MTABLE. SYS, RES_INFO. SYS, SYS_CONF. SYS, version.sdk. I try to put a few new files in the folder "music" and it works perfectly, they appear in the player, so the problem is only with the 'old'; in fact, I would not delete them mind these files if it is not necessary, because I have them on my hard drive).

  I hope someone can help me, thank you very much! (and please excuse my bad spelling & grammar, I'm Italian!  :-))

  1. pick up your player Sansa Clip - the physical drive you bought.

  2. activate.

  3. press the small 'home' button, the small button on the front of the item located at the top right of the Ferris wheel - it's the small button with the little house printed on it.

  4. press on the lower part of the wheel (at 06:00 position) until the screen shows the settings.

  5. press once on the right side of the wheel (at 03:00 position) to access settings options.

  6. press on the lower part of the wheel (at 06:00 position) until the display shows USB mode.

  7. press the right side of the wheel (at 03:00 position) once to enter USB mode options.

  8. tap up or down the Ferris wheel (at 12 and 06:00 positions) and select the USB setting menu is currently not checked (I think that this will be the PSG; ignore the setting "Auto", for the reasons I stated above), then select it by pressing the right side of the wheel (at 03:00 position).

  9. you have now set your video mode MTP USB drive.  Press the small home button twice to return to the regular game mode.

  And that's all.  Now when you connect your player to Clip on your computer, your files should appear on your computer.  If they don't, repeat the above, but set the USB to the MSC mode.

  I hope this helps.

  PS As I said earlier, the USB modes, the MSC mode (compared to the MTP mode) is more universal and will work on multiple computers.  If you use a video player on other computers, you can set your video player in MSC mode, to ensure that it will connect to other computers.  If this is the case and if your video player has been set to MTP mode so far, before changing the setting of mode USB mode MSC, to be able to see all files in the reader of your video on your computer, first copy the files from the drive of your music back to your computer delete them out of your video player, set the Clip Player USB Service mode weather of the Canada (see above) and then copy the files to your video player.  This ensures that you can see all the files of your video player when it is connected to your computer.

• New firmware Sansa Clip (1 GB) = no music file?

  I just upgraded my Sansa Clip (1 GB) with the new Firmware, and when I plug it in, it does not my music files, how to bring them back? The music is still playing and everything, just at the moment where I Plug and click on the folder, it is not show them.

  Firmware updates usually restore the unit to the default USB, Auto Vice mode. It will connect to the PSG most of the time. If the files have been transferred in MSC mode, you do not see them unless in this mode. Go to settings > system settings > USB mode and switch to the MSC. Then re - connect and see if these files now appear.

• The Firmware Update (Sansa clip 2 GB) support

  While he was trying to transfer my cell phone to my Sansa Clip audiobook, I get the following error during the file transfer:

  ""It is not possible to obtain the certificate of the device. " Contact the device manufacturer for a firmware update or other measures to address this problem. » » »

  When I try to down load the latest Sansa firmware using the "Sansa Updater 1.2 ' version, I get the following error:"

  «"" The following error has occurred: cannot download the selected files.»»» Please try again later. » » »

  I currently wear farm: 1.01.11 on my Sansa Clip (2.0 GB)

  Can offer you any advice on the correction of such? A firmware update will solve the problem of certificate? Any help would be appreciated...

  DLR

  There is a message at the top of this map with instructions for a manual update. use that to update the firmware, and then in the settings menu use the format command. Try once's done it charging books.

• Fully formatted my Sansa Clip, in any case I can reinstall the firmware from scratch?

  I've deleted some songs using a Mac but noted they were still playable from my sansa and when I plugged on a PC the files not found so I decided it would be a fine idea to format the thing and reinstall from scratch.

  I'm having a little trouble finding how do and now starting to worry that my pure idiocy has ruined my sansa clip for me.

  I was running Rockbox when this whole thing started, if that helps at all.

  When plugged into a computer screen 'Bootloader USB mode' bed and when unplugged it reads "File not found", then "USB Plug cable.

  Thank you!

  
  

• Can not record songs on a Sansa Clip +.

  I recently bought the Sansa Clip + and it has firmware version V01.01.05F and the song rate feature doesn't seem to work. I choose 1-5 stars and select the choice, but the note is not saved. Another poster asked a similar question and its solution involved affecting USB MTP mode, but this has not worked for me. Any suggestions?

  Thank you

  OK I thought about it, the new firmware fixed this problem for me.

• Sansa clip + does not see the audio books I have loaded

  I got my Sansa Clip MP3 player + for two years and it works very well, so far.  I only use it for audio books.  Recently, I reformatted the player and loaded new books in.  When I went to read, the audio books folder was empty.  I have connected the player to the computer again, and the books were in the audio books folder, where I had loaded.

  I've updated the firmware to the V01.02.16A Version, and there was no change.  I tried to reset by pressing the start button. No change.

  Memory has 3750 MB with 3135 free, indicating that there are books in memory, but the player does not see the.  What is going on?

  That's all!  I checked the format of audio files.  It is the AAFC, with suffix .m4a.

  The Sansa manual says:

  "The Sansa® MP3 Player will support MP3, WAV, WMA, secure WMA, FLAC, Ogg Vorbis and audiobook formats.  I guess that AAC is not one of the formats that they support.  So I have to convert .m4a to .mp3.  I guess there are a lot of tools to do it.  Any suggestions about which one is the best?

  Thanks a lot for this revelation.

• Help! My Sansa Clip + is no longer recognized by my PC when connected by USB port!

  Reading, the latter time, ' said, 'written' only when connected. Normally, he alternates between the 'Reading' and 'Writing' when it is connected to the PC and, therefore, it USED TO BE recognized by the PC in these conditions. The device is not recognized in Windows Explorer as a device or disk as usual. I use Windows 7. The device is not recognized by Windows Media Player synchronization purposes: I can't synchronize playlists of music more.

  You try to reset by pressing the power button / stop 20 seconds does not help.

  Using different USB ports does NOT help.

  The cable using different USB does not help.

  Another computer has NOT appeared.
  

  SOLVED BY TECH SUPPORT CHAT: Here is the conversation with the restorative troubleshooting following steps:

  Jonathan Bailey is me:

  Kyle Ahmed is the man of SanDisk tech support:
  

  
  

  Of the troubleshooting information for "not recognized by PC.
  ***************************************************************************

  Kyle Ahmed: Please tell me the exact model, color, and the ability of your Sansa player?
  Jonathan Bailey: black, Sansa Clip +.
  Kyle Ahmed: Please provide me with the ability as well?
  Jonathan Bailey: I think it's a 4 GB
  Kyle Ahmed: Please tell me when and where did you buy this drive?
  Jonathan Bailey: Citrus Heights, CA, Jan 2012 target
  Kyle Ahmed: If I understood you correctly, your drive is not getting recognized by the computer?
  Jonathan Bailey: No, it is not when connected by USB.
  Kyle Ahmed: Please tell me, are you using Windows 7?
  Jonathan Bailey: Windows 7
  Kyle Ahmed: I understand. Please connect the player to the computer.
  Jonathan Bailey: It should say READING and WRITING.
  Kyle Ahmed: very well. If you please, right click on computer and select manage.
  Kyle Ahmed: Click Device Manager in the left pane.
  Kyle Ahmed: Sansa player will be displayed in the right-hand of Device Manager: 1. USB mass storage device
  (if the player has MSC) 2. portable (if the player is set to MTP mode)
  Jonathan Bailey: he is profiled as a Portable device Sansa Clip + 4 GB
  Jonathan Bailey: a yellow exclamation point icon
  Kyle Ahmed: right click on the drive with the error indicator and choose uninstall.
  Jonathan Bailey: icon done, went
  Kyle Ahmed: In the top menu, click Action, and then select search the hardware changes.
  Jonathan Bailey: said device still WRITTEN in reading
  Jonathan Bailey: said ball driver software not properly installed
  Kyle Ahmed: very well. Please disconnect the player from the computer.
  Jonathan Bailey: ok, says still WROTE
  Kyle Ahmed: Please press on and press and hold power for 20 seconds to turn it off.
  Kyle Ahmed: Then, press and hold the Center button while connecting the device to the computer.
  Kyle Ahmed: It is on the first view the drive between the up/down/left/right button.
  Kyle Ahmed: This allows the computer to recognize the drive as a removable storage as well
  You should see it in the devices with removable storage section in the computer.
  Jonathan Bailey: it says CONNECTED then he says SAN Disk alternately
  Kyle Ahmed: Check if the drive is recognized by the computer.
  Jonathan Bailey: there is now a SANSA CLIPP (F): in my Windows Explorer navigation pane
  Kyle Ahmed: It seems that pilots of the PSG of your computer went corrupt due to which your
  Player is recognized not earlier. In this case, what you have to do is to reinstall Windows Media Player or
  change the USB mode of the player to MSC permanently solve the problem. But the MSC mode will not allow you
  by creating playlists with Windows Media player to transfer songs from your player.
  Jonathan Bailey: Windows Media Player Sync now recognizes "SANSA CLIPP"
  Jonathan Bailey: I need Windows Media Player synchronization capability or the Sansa is not good for me.
  Kyle Ahmed: Jonathan, please check if the player is displayed under the Portable devices or with
  Removable storage in the computer (Explorer)?
  Jonathan Bailey: It's showing under devices with removable storage in the computer (explore).
  Kyle Ahmed: Please disconnect the player from the computer.
  KKyle Ahmed: Please activate the drive.
  Kyle Ahmed: Then go to settings > system settings > USB mode.
  Kyle Ahmed: Then in the player's main menu, go to settings > system settings > USB mode.
  Kyle Ahmed: PSG and click the Center button to confirm.
  Kyle Ahmed: very well. Now, connect the drive to the computer and check if she gets recognized or not.
  Jonathan Bailey: OK now recognized as his former self again.
  Kyle Ahmed: If the player is now recognized and alos appear in Windows Media player, I'm wrong?
  Jonathan Bailey: I have not checked the media player yet
  Jonathan Bailey: it is recognized in Explorer
  Kyle Ahmed: Please disconnect the player from the computer.
  Kyle Ahmed: To check the version of the Firmware of the player.
  Jonathan Bailey: ok, it says REFRESHING YOUR MEDIA
  Kyle Ahmed: very well. I would like to know once you are in the main menu of the player.
  Kyle Ahmed: Go to settings > system settings > Info.
  Kyle Ahmed: Give Me the version of the firmware of the drive please.
  Jonathan Bailey: Version V01.02.16A, isn't it?
  Kyle Ahmed: It seems that the version is up-to-date.
  Kyle Ahmed: The reason why it took more time to update the media earlier must be because of the large amount
  songs that have been transferred, which can take the time to read.
  Jonathan Bailey: OK, for 2 500 songs, it usually takes about 15-20 minutes
  Kyle Ahmed: I understand.
  Kyle Ahmed: You have faced a temporary problem that was solved by resetting the player and refreshing the drivers of your computer.
  Kyle Ahmed: You should not face additional problems.

• Play OGG tracks, freezes my Sansa Clip Zip

  Hello

  I tried that twice add files ogg to my card 32 Gb microSDHC SanDisk Ultra that I use with my Sansa Clip Zip, and the two times my player froze when he tried to play.

  I simply copy/paste ogg files, so I did not use any software to manage the upload. When I download mp3, I usually use the Winamp player.

  Ogg files are soundtrack of games shipped with my purchase on www.gog.com.

  I do something wrong when I download ogg files? Music plays without problem in VLC media player.

  Thank you.

  The Ogg decoder in the sandisk firmware is pretty buggy and really inefficient power. I talked to them years sending a few corrections (they use the standard decoder open source, just a version older and without much optimization), but who worked all the time, they stopped really about adding new things never happened. If you use multiple Ogg files, you should probably watch using Rockbox. I think the battery life is 2 or 3 times longer due to optimizations, and compatibility is much better.