The Satellite Pro 2100 wireless

Similar Questions

• With a Satellite Pro 2100 wireless network connection

  Even though my work laptop has a switch (power) wireless and DIRECTED on the side (under the floppy drive), it does seem to pick up a wireless connection, or have wireless options on the corresponding section of the control panel.

  Is it a hardware problem (that is to say he is ready wireless, but has not installed) or a Windows problem?

  Thank you

  Hello

  The WiFi card is optional on the Satellite Pro 2100.
  In this case, it is possible that your device has all switches but no card WLan.
  I recommend you to check the Device Manager. There you should find the WiFi card network card is installed.

• Help identify the Satellite Pro 2100 download driver

  I have a Satellite Pro (marked below as a PS210E-00C3G-EN and a P4 2000/256/30 G, 15XT, CDW, LW). I think it's a satellite Pro 2100, whatever.

  Problem I have is that when it comes to downloading the drivers, I can't find anything approaching this model of the selection process. I've searched the forums and there's not much on this machine otherwise than in this one, so I was hoping someone could help me identify this machine especially for driver downloads... Yes, guess who has reinstalled Windows XP without checking I had all the specific stuff Toshiba tucked away first?

  For now, I have a load of things works without drivers, and it is not at all optimal...

  Thanks in advance

  J

  Toshiba European driver on this page;
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU#

  and choose;

  The Satellite Pro Archive Satellite Pro Satellite Pro 2100 21xx archives *.

  Then you will find all drivers available for this machine Toshiba ;)

  Good bye

• Problem with the Satellite Pro 2100 and new modules of RAM

  Hello

  I have a Toshiba Satellite Pro 2100 and I have a problem with the memory upgrade.
  My notebook of startup only if a plug-in module to a ddr, but if I insert the two modules IN CC led orange flashing start when I try to turn on the pc. The stop led not blinking unless I take out the battery and the dc adapter.
  Here is the code of the modules:
  KTT3614/256 (original)
  KVR266X64SC25/256
  256 MB pc2100 both.
  Starting the PC with any of them, as well as the modules are both compatible.

  Any ideas?
  (Sorry for my English but I'm Italian: D)

  Post edited by: DaK_TaLeS

  Hello

  the second location of memory perhaps is the problem.
  Try to start with a module in the second slot, first an empty slot.

  Good bye

• How to install driver on the Satellite Pro L500 wireless?

  I have a Satellite Pro L 500 with Windows Vista but I m unable to connect to wireless internet.

  I know that the problem is that there are no installed wireless driver. I tried to update from the Device Manager, but it does not work.

  What can I do else?

  I put t know what model do you have exactly (L500-xxx) and cannot say what driver do you need exactly but the latest WLAN drivers, you can download from the Toshiba WLAN portal - http://aps2.toshiba-tro.de/wlan/

  Check it out.

• How to access the Satellite Pro 6100 wireless network card?

  I'm cleaning a Satellite Pro 6100 for a customer and noticed that it has built in wireless card (something they didn't know). However, I just can't work out how to access. I pushed the little switch on the side backwardsa and I rocked forward, Fn + F8 and everything else I can think. But nothing happens.

  I even found the Switch Device Network utility, but that is only to show the LAN card.

  Any ideas?

  First of all please check if Device Manager in the laptop has an integrated WiFi card. The switch WLan available on the website of the laptop does not. Laptops are delivered with different specifications, and the WLan card is optional.

  I think that the WLan card is not installed in your laptop and so you cannot use it.

• What HARD drive can I install the Satellite Pro 2100?

  I installed a second hand Toshiba 40 GB HDD in my Pro 2100, but he fails to recognize in the BIOS. Any ideas?

  Yes, I have an idea ;)
  Have you checked if the HARD disk is not corrupted?
  I think it's a first step to find out what's wrong.

  If you are sure that the drive is 100% damage not so in my opinion him BIOS is unable to manage the size of the HARD drive. It s just too big size.
  The BIOS supports multiple disk sizes but if HARD drive it too big the BIOS may not be able to recognize the HARD drive.

• How to remove the Satellite Pro 2100 BIOS password?

  Hi one of our former workers have our business sp2100 laptop and recently left, now we went to use the laptop and it has a password on it.

  We cannot get in touch with the ex-worker and now have a laptop useless?

  can anyone help?

  HEY Mac,

  Unfortunately, once a BIOS password is set, it is not a simple procedure to reset unless the original password is known. It is a simple but effective measure to protect the PC or laptop in case of theft, so obviously any widely known for the bypass procedure would make it inefficient.

  You will need to contact an authorized Toshiba Service partner who, after having completed the audit of the ownershipo re-flash of the BIOS chip to remove the current password, or replace the motherboard (including the BIOS chip) depending on the model.

  Good luck

• Satellite Pro 2100: How do I order the recovery CD

  Hi all...

  I tried to use the search function to find the answer to this, but so far, I've been unable to.
  I just had my laptop Toshiba Satellite Pro 2100 old friends, but the HARD drive is full of stuff I would never like games and old family photos that he told me to just delete.

  Unfortunately he hasn't his recovery disk and I tried to enter the serial number in the disk drive service replacing and he says he's too old...

  Anyone know where I can get one from?

  Hello

  Hmm... the Satellite Pro 2100 is the old series of laptop and I doubt it could be possible to order the CD from recovery for this unit. But to achieve this, I recommend contacting the local Toshiba ASP for some details.

  Another possibility to install the O on this old could be the use of the original CD of Microsoft Windows. After the installation of the own XP operating system you could visit the page of European disc of Toshiba and could download the necessary drivers.

  You can find the drivers in the ARCHHIVE region.

  Check it out

• What card WiFi could be compatible with Satellite Pro 2100 PS210E

  I have an old Satellite Pro 2100 PS210E-005ES-FR part number and trying to locate a Wifi card to fit.

  If someone can advise on such a map, can you?

  Hmm, the satellite Pro 2100 seems to bear the USB 1.1.
  There could be a slow data transmission using a USB WiFi key. So I advise to use a wireless network card internal minPCI as suggested above.

  I discovered that this Kit (PA3212U-1MPC) wireless LAN card could also be used too.

• Satellite Pro 2100: TEAC CD drive problem - cannot access CDs

  Hey

  I got my Satellite Pro 2100 for another few years.
  So far it has worked well.
  However, now the cd player is always displayed the yellow light just after trying to load a cd, followed a quiet thump. This means that I can not access the content of the cd (audio or data).

  The drive is still recognized by Device Manager, and I'm told it works well - I know better however, it most certainly isn't! the drive will still appear in my computer, and I can always try and discover the contents of the cd inserted, which is always empty!

  Ant help or advice would be most appreciated, because I really want to re-preparation of the system!

  Hi Simon

  The satellite Pro 2100 is an oldie ;) and I guess that you pointed out the CD/DVD drive all the time long.
  I would not be surprised if this player is dead. For me, it looks like the end of the device.

  Until it must be said that I'm afraid you need to replace the CD/DVD drive with a new m.

  Best regards

• Need new driver NVIDIA for my Satellite Pro 2100

  Hello

  Anyone know if there is a newer version of the NVIDIA graphics driver that comes with the satellite pro 2100? I looked on the Toshiba downloads section and on the NVIDIA site, I have not had any look to find everything. They simply stopped updating this driver?

  Any help will be thank you very much and I do a search before posting, but haven't found anything.

  Thank you

  Hello Steve

  Satellite Pro 2100 is fairly old unit. It is about 6 years old. Graphics card is NVidia GeForce4 420Go with 16 MB of memory only. Now the question: do you really want that Toshiba should support unit of 6 years with the latest NVIDIA driver? Please don't be crazy on me, but I really don't understand what you expect.

  A more interesting question to me is: for what purpose you need new driver? You want to use with newer games, or maybe you some graphic problems watching movies DSVD?

• Upgrade CPU on Satellite Pro 2100

  Hello world!

  This time my question belongs to the CPU in my Satellite Pro 2100. Currently under construction in an Intel Pentium 4-M GH 1.9, my question is, wether I could built in a processor (more powerful sense) "superior". Have seen CPU type Intel Pentium 4 M up to above 3.0 GH. Of course, this is related to the FSB, and due to the fact that I don't know what kind of motherboard I have, I just want to know if anyone here knows the maximum.

  I know there is Toshiba Satellite Pro Notebooks with 2.2 GH Intel Pentium 4 M processors inside.

  happy to all boards

  L0nestar

  I remember well the Satellite Pro 2100 was equipped with 5 different Intel Pentium 4 - M s CPU
  1.7 GHz, 1.8 GHz, 1.9 GHz, 2.0 GHz, 2.2 GHz

  So, theoretically, you can insert a 2.2 Ghz Intel Pentium 4 - M CPU.

  But please don't ask me if it is really possible because the CPU upgrade on laptops is different as an update on the desktop.
  On some older portable computers, the CPU has been fixed for the mobo and it was not easy to remove it.

  That's all I can say about this case.

  Good bye

• Satellite Pro 2100: Question about upgrade HARD drive

  Hello
  ICH have a Satellite Pro 2100 with a capacity of 40 GB HDD. Now I want wo upgrate with a 100 GB or 120 GB HARD drive. Is it supported? Where is the upper limit of the capacity of support? Is there something I need to look out? Are there special attributes that am I looking for?

  prior to thank you for your support

  Hello

  It is very unlikely that the 100 or 120 GB HARD drive works.
  I guess that the BIOS will not recognize these hard disks.
  I don't officials documents found on the hard drives supported, but I think that the 60 GB HARD drive is the biggest HARD drive that works on the Satellite Pro 2100.

• Satellite Pro 2100 - no wireless connection

  I have just acquired a Satellite Pro 2100, thin machine, but I installed a wireless 802.11 card Belkin g and he said he joined my wireless network and I can actually connect to the internet, but he refuses to see the other machines on my network or be seen.

  Any suggestions gratefully received.

  [Edited by: admin November 20 05 15:55]

  Hello

  As far as I know that you don't see other units on this path. You can see the other wireless units if you use some additional software like ConfigFree (latest version). On this way, you can communicate with other units (chat or Exchange different files).

  Perhaps another third party software can be useful for you.

  Good bye