The schema Validation utility affect the metadata repository database?
HelloWe have a separate database for our portal repositories and metadata. I ran the SVU both in mode CLEANING and REPORT on our DEV environment without any problems.
Is what I can't understand, if running the SVU in CLEANING mode change anything in the database metadata repository. All validation controls and cleanups that SVU is as far as I understand are in the database of the portal.
My hypothesis is correct? Or is there anything on the metadata repository database that changes of the SVU?
Any help will be appreciated.
Thank you.
CV
Just follow the standard recommendation.
Have a backup of the comic before you run the SVU; even if you used probably have to use it.
AMN
Tags: Fusion Middleware
Similar Questions
-
Hi all
I want to install a test environment with the following software products:
WebLogic Server 10.3.6
WebCenter Capture 11.1.1.8.0
WebCenter Imaging 11.1.1.8.0
BPM 11.1.1.7.0
SOA Suite 11.1.1.7.0
Oracle Database Enterprise Edition Release 12.1.0.2.0 12 c
I use the remote 11.1.1.8.0 to create the database schemas.
When RCU checks the prerequisites, it comes up with a warning as follows:
«The database you connect to, is one newer than the supported version.» See the matrix of certification for the supported DB versions".
If I type 'ignore' on the message box, it stops the verification process will not continue. Also, if I type "Cancel" does the same thing.
The error message displayed in the Message box is both below:
UCR-6002: the database specified does not have the minimum requirement to load the metadata repository.
UCR-6080: Global check prerequisites failed - requirement of verification for the specified database
The database that you connect is a CDB that is not supported.
Action taken:
1. check again on the database character set and confirmed it is set up correctly for AL32UTF8
2. the databases are supported for WebCenter 11.1.1.8.0 + 12.1.0.1, so the database version is supported.
Hope someone knows what's going on.
Thanks in advance.
Try to create a plugable (PDB) database within the CBD and then rerun
the UCR.
May be restricted the RCU to install MDS and other schemas FMW the
CBD, but rather in the PDB.
More information on PDB and CBD you can find here
http://docs.Oracle.com/database/121/CNCPT/cdbovrvw.htm#CNCPT89235
Hope that helps,
Anatoli
-
10g - where the private connections are stored in the metadata repository
We use OAS 10.1.2.3 infrastructure and BI middle tier on Windows. SSO is enabled and the users are authenticated against OID. Users can create their own private connections. I would like to know: How can I query private in the OAS metadata repository connections? I would like to know the names of connection and who created them.
Thank you very much.
Georges NicksHi Hallie
Information about the connections are held in this table: wwsso_psex_user_info$This table is in the database of the infrastructure belonged to this user: orasso
app_id column has the following value:
If app_id = ' 1325 "is a private connection
If app_id = '1326', then there is a public link
Best wishes
Michael -
The installation for EM 12 c document indicates "Install Oracle Database 11 g Release 2 (11.2.0.3) software on the host computer, where you want to create the database". I want to use Oracle database 12 c. Is there a template to preconfigure the repository on a database of 12 c? Or is there a work around?
For the version EM Cloud control 12.1.0.5, which is the most recent version of the MA, the models for the 12.1.0.2 of the database version is available here.
Note that, although a DB template helps you to simplify the installation process, you can always install EM12c without one. If necessary, look at the manual below:
http://docs.Oracle.com/CD/E24628_01/install.121/e22624/install_em_exist_db.htm#EMBSC159
Kind regards
-Loc
-
Patches general PSU and SPU for the OEM repository database?
Em12c said my database of WHO should install 20299013: DATABASE PATCH UPDATE 11.2.0.4.6 SET (INCLUDES CPUAPR2015) but when I try to make a corrective plan, EM says
Target 'OEMPROD. UIT.NO' is the repository of this CMS. Patching this goal is not supported. Use the SGD Update Manager.
So this means that the db OEM should not have the General JAVA virtual machine to the UAP, UPE, patches installed and only the special who patches?
Hello
You can not use the Patch Manager to patch the current SGD.
Pls follow the doc to SGD Patch below and the repository.
http://docs.Oracle.com/CD/E24628_01/doc.121/e24473/opatchauto_oms.htm#EMADM13241
Patch management service Oracle and the repository
Concerning
Krishnan
-
Layer exception in the metadata Services.
Hello
I get an exception in the metadata Services layer when you deploy the Composite SOA SOA server.
The error logs are detailed below:
* [17: 42:23] error deployment archive sca_Test_EnquiryApp_rev1.0.jar to partition 'default' server soa_server1 [http://localhost:7011] *.
* [17: 42:23] HTTP error code returned [500] *.
* [17: 42:23] error message from the server: *.
There was a deployment of the composite on soa_server1 error: oracle.mds.transfer.TransferException:
MDS-00001: exception in metadata Services layer
* MDS-00522: default to save the document/deployed-composite/default/Test_EnquiryApp rev1.0/xsd/Request1. XSD for the metadata repository *.
ORA-01653: unable to extend table DEV_MDS. MDS_ATTRIBUTES by 1024 in the DEV_MDS tablespace
ORA-01653: unable to extend table DEV_MDS. MDS_ATTRIBUTES by 1024 in the DEV_MDS tablespace
* [17: 42:23] check server log for more details.*
* [17: 42:23] error deployment archive sca_ Test_EnquiryApp rev1.0.jar of ' default ' on the soa Server partitionServer1 [http://localhost:7011] *.
* [17: 42:23] # incomplete deployment. ####*
* [17: 42:23] error deployment archive/deploy/sca_ Test_EnquiryApp _rev1.0.jar Test_EnquiryApp file:/C:/JDeveloper/mywork/TestEnquiry/ *.
* (oracle.tip.tools.ide.fabric.deploy.common.SOARemoteDeployer) *.
As I was able to make the mistake that this is issue related to the tablespace but the tablespace defined by s/n is autoextendable with a maximum size of 8 GB and the size of the table space was currently 1 GB. Do you anticipate any problems here.
The version of the SOA Suite and JDeveloper is 11.1.1.5.0
Any help will be appreciated.
/ VMHello
See the explanation of the Oracle and the solution to this problem:
Cause
Running out of space in the MDS schema.This error does not necessarily indicate if or not you have enough space in the tablespace, it simply indicates that Oracle could not find an area large enough contiguous space where to fit the next measurement.
Solution
In SOA environment do firstly that all servers are down.1. start emctl console with command
cmd >. oraenv
cmd > emctl start dbconsole
2 read the site configuration with order returned by the return command, something like https://host:1158 / em
3. connect to the url in step 2 with credentials sys/eu1
4. click on the Server tab
5. click the storage on data files Section
6. read the parameters for MDS schema, (in my case PS3_MDS, used 45,625 MB)
7. click line MDS for your SOA Suite and then press Edit
8. increase the size of the data file and applyArik
-
OAS 10 g metadata repository creation Assistant &; database version question
Hello
I have to install Oracle Application Server 10.1.2.0.2 on a server that already has a database of Oracle 11 g running on it and I don't want to install a different database because of the load factor. I don't know if I could use this database
(version 11g) for the metadata repository. I know that we can use an existing database for the repository of metadata using the metadata Wizard, but I'm a little worried about the version of the 11 g database as the application server and the creation of metadata assistant, both are 10.1.2.x.
Your help is very appreciated.
See you soon,.
OmerOPNRRM 10.1.2.0.2 cannot be used to install a deposit in an 11g database. If you want to use OPNRRM with a 11g database 10.1.2.0.2, you will need to install a database 10g first, create the metadata repository and then upgrade the database to 11g. Not applicable in your environment as you already have an 11g database.
Kind regards
EJ -
How to be notified of the ftping file schema validation failure in XMLDB
Hi all
Oracle 10.2.0.4
We used RegisterSchema to register for an XSD. And we are ftp'ing the xml files in the database using port 2100 to load in the xmltype table.
How should we deal with the case where the XML file fails validation schema for the FTP "put" of the process, as with an enumeration error? We want to save the error and warn users that the file failed to load due to an error in xml validation.
Is there a log somewhere in Oracle who writes the error, as in the listener.log?
Can we have the FTP process will return the error ORA-31038 that gets triggered when a xml schema validation error occurs?
Thank you very much
TroyThis error is caught during the validation of light since we need to encode the value of the enumeration before we store. Therefore, it happens before any insert triggers fire. The only solution for this is 11.1.x using the repository event model.
-
ODI-1222: start failure on agent edge internal: logical schema was not found in the main repository. but when checked that all the logical schema is perfect
because of this session is failing.does anyone have the solution to this problem
Hello
Do you have the logical schema of the you configured for the respective physical server and assigned the same context. If not, please set up and re - test your work.
hope this can help you
Kind regards
Phanikanth
-
Schema validation fails on the transformed XML document
OK, this is weird.
I get XML files that are supposed to conform to a given XSD. There are dozens of different parties who send these files. To be more precise, I refer to the Ontario Energy Board (OEB) PIPE Documents.
I found that at least one sender sends invalid files. I can't that fixes to the source, so I'm working around that.
for example
Oracle is not like this:<?xml version="1.0" encoding="UTF-8"?> <PIPEDocument xmlns="http://www.oeb.gov.on.ca" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.oeb.gov.on.ca/ PIPEDocument.xsd" Version="4.0" DocumentReferenceNumber="xxx" CreationDate="20110825100008000ES"> <MarketParticipantDirectory> <Sender> ...
OK, so to work around this problem, before schema validation, I apply an XSLT transformation to clean the top-level element:ORA-31154: invalid XML document ORA-19202: Error occurred in XML processing LSX-00344: namespace values "http://www.oeb.gov.on.ca" and "http://www.oeb.gov.on.ca/" differ
Nice: the fact that it is intended for:<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns="http://www.oeb.gov.on.ca"> <xsl:output method="xml" indent="no"/> <xsl:template match="/"> <xsl:copy> <xsl:apply-templates/> </xsl:copy> </xsl:template> <xsl:template match="*"> <xsl:if test="local-name() = name()"> <xsl:element name="{local-name()}"> <xsl:apply-templates select="@*|node()"/> </xsl:element> </xsl:if> </xsl:template> <xsl:template match="@*"> <xsl:if test="local-name() = name()"> <xsl:attribute name="{local-name()}"> <xsl:value-of select="."/> </xsl:attribute> </xsl:if> </xsl:template> </xsl:stylesheet>
If I now the schema validate the above transformed XML, then it validates OK.<?xml version="1.0" encoding="UTF-8"?> <PIPEDocument xmlns="http://www.oeb.gov.on.ca" Version="4.0" DocumentReferenceNumber="50520110825080908VA0001.EBT" CreationDate="20110825100008000ES"> <MarketParticipantDirectory> <Sender> ...
Large? No, if I try to turn on the fly (i.e. without first transformation and followed by reading in the transformed data from the file), I get a strange error:
declare v_xml xmltype := xmltype(bfilename('ERS_FILE_LOAD_308', 'DecryptedFile-30873604.xml'), 0).transform(XDBURIType('/ERS_TEST01/PIPE/XSLT/V1.0/pre_validate_XSLT.xsl').getXML()); v_xsd_name varchar2(255) := 'PIPE/Power/V4.0/PIPEDocument.xsd'; begin if v_xml.isSchemaValid(v_xsd_name) = 1 then dbms_Output.put_line('valid'); else dbms_Output.put_line('invalid'); --in order to get specific error info for a non-schema message need to convert the XML to schema based v_xml := v_xml.createSchemaBasedXML(v_xsd_name); v_xml.schemaValidate(); end if; end; /
Exsqueeze me? What element in the schema?ORA-31043: Element '' not globally defined in schema ''
The transformation itself works very well. Specifically, if I run the following:
... I get the desired result. Of course, if I save the result file and validate the fact that it works:select xmltype(bfilename('ERS_FILE_LOAD_308', 'DecryptedFile-30873604.xml'), 0).transform(XDBURIType('/ERS_TEST01/PIPE/XSLT/V1.0/pre_validate_XSLT.xsl').getXML()).getclobval() from dual;
I would like to join example XML file, but it contains customer data so I can't do that. I would fix the XSD but it is the nest of a rat of 50 XSD with includes and a 300 script online registration scheme, so I can't do that.declare v_xml xmltype := xmltype(bfilename('ERS_FILE_LOAD_308', 'DecryptedFile-30873604_manually_saved.xml'), 0); v_xsd_name varchar2(255) := 'PIPE/Power/V4.0/PIPEDocument.xsd'; begin if v_xml.isSchemaValid(v_xsd_name) = 1 then dbms_Output.put_line('valid'); else dbms_Output.put_line('invalid'); --in order to get specific error info for a non-schema message need to convert the XML to schema based v_xml := v_xml.createSchemaBasedXML(v_xsd_name); v_xml.schemaValidate(); end if; end; /
What I'm missing here?
Looks like an Oracle bug for me at this isSchemaValid binds to a beginning of the XML instance and not to the instance transformed.
thoughts?
(using database Oracle 11 g Enterprise Edition Release 11.2.0.2.0 - 64 bit Production under linux)
Published by: Pollocks01 on October 18, 2011 16:11Hello
Looks like an Oracle bug for me at this isSchemaValid binds to a beginning of the XML instance and not to the instance transformed.
That wouldn't be surprising. There are "few" bugs on the XSL transformation.
Here's a recently posted: {: identifier of the thread = 2245703}The solution was to serialize the output and analyze again.
So, what you describe on 'reading of a works file' makes me think it's the same kind of problem.You can also view the contents of the variable just after that:
v_xml := v_xml.createSchemaBasedXML(v_xsd_name);
?
-
How to get the metadata for the selected tables of a schema
Hello
I need the metadata for the tables selected for an activity. The list of the table continues to change now. I get the list of tables just before the activity.
What I need is to know how to put the list of tables in the sub query dynamicallly
+++++++++++
exec dbms_metadata.set_transform_param (DBMS_METADATA. False SESSION_TRANSFORM, 'SEGMENT_ATTRIBUTES',);
exec dbms_metadata.set_transform_param (DBMS_METADATA. False SESSION_TRANSFORM, 'STORAGE',);
exec dbms_metadata.set_transform_param (DBMS_METADATA. SESSION_TRANSFORM, 'TABLESPACE', TRUE);
Select DBMS_METADATA. GET_DDL ('TABLE', '&') from user_tables where rownum < 2;
+++++++++++
What I need is something of the form where table_name in (< table1 >, < table2 >, < table3 >,..., etc.) in the query above, so that i access all the metadata
He doesn't hit me how I can write this query to single line. Can someone help here?
Regds,
MalikaHello
try using the name of the column to user_tables and owner of the table in the "DBMS_METADATA. GET_DDL' and the reel to reel for some files and run this file in turn exit.
coil
Select ' select DBMS_METADATA. GET_DDL ("' TABLE," ' | table_name |', "') double;' from user_tables
where;
spool off;@some_file - trying to spool output too.
-Pavan Kumar N
-
Associate the Migration repository SQLDev 4.0 EA1
Currently getting the following error when you run the Migration repository associated with DB12c:
SQL error on executing the Script
Try to delete the repository before the creation of repository
IT seems that the process is complete, because the database object is created. However I do not understand this in GR 2 11 or XE. Any ideas.
Made a DatabaseDiff and here are the results:
Types:
MIGR_REPORT_DETAIL_ROW
MIGR_REPORT_DETAIL_TABLE
MIGR_REPORT_SUM_ROW
MIGR_REPORT_SUM_TABLE
Index:
MD_STORED_PROGRAS_IDX2
MD_DERIVATIVES_PERF_IDX1
MIGRLOG_PERF_IDX
MD_ADDITIONAL_PROPERTIES_IDX
MD_DERIVATIVES_PERF_IDX3
MD_DERIVATIVES_PERF_IDX2
MD_TABLES_PERF_IDX2
MD_TABLES_PERF_IDX1
MD_DERIVATIVES_PERF_IDX4
MD_COLUMNS_PERF_IDX
MD_DERIVATIVES_PERF_IDX
Bouquets:
MIGRATION
MIGRATION_REPORT
MIGRATION_TRANSFORMER
Body of packages:
MIGRATION
MIGRATION_REPORT
MIGRATION_TRANSFORMER
Post edited by: dbcapoeira. Database diff report has been added.
Hi dbcapoeira
I would say that the database user has no privileges on tablespace space.
Something like:
delete and create the user from a sql command prompt then "Grant unlimited tablespace to
" DBA. then associate the repository (partner must do everything that creates it and inserts)
(Grant "resource", used to give privileges on tablespace space, not in 12 c).
You can create a table in the tablespace without data in 12 c as it is a metadata operation - no blocks are affected in the target tablespace.
An "empty" from repository has a few entries of data such as its version number.
-Turloch
Team SQLDeveloper
-
How to change the default repository and connect online
We have a new installation of OBIEE 11 g on Linux and the Admin Client on Windows 7 (64 bit) tool. I am unable to connect 'online' to anything except the sample App Lite DB. By reading the docs, they describe navigation to a file .rpd on a Windows machine and import of metadata. I want to change the default repository in the sample App Lite that we created before installation.
It's confusing because the step #1 installation for the server and the client was to have created the repository by using the remote control. This has been done, and the PB is on a Linux server. I'm confused by references to the creation of a repository at this stage, and/or importation of a repository. It is not on a windows machine to access to. am I right in thinking that the evolution of the 'default' repository via the EM console is the 1st step? Any tips will be appreciated.
We have created a DSN on the BI server. Who should be on the DB server instead? The PB is on a different server. Are DSN for Server BI and DB server required?
Thanks for any advice on this.
Published by: baggirom on June 4, 2012 13:08Hello
I think you're confused with multiple uses of the word repository. Here are the basic principles that can help you to distinguish
1 repository per RCU: this is a set of tables/views/schema of database that stores information in this installation of OBIEE. Should be details like the current version of OBIEE, host name, track information usage etc.
This is the place where the information would be stored related to most of the Fusion Middleware components. Yes, OBIEE, RTD, BIPublisher, weblogic, etc are part of Fusion middleware and so information connects to all of these components would be stored here so that they can easily be integrated, to communicate, to work seamlessly with each other.
2. filing of OBIEE (.rpd): this is the metadata that you create for your business needs. It would have connections to different physical sources, business logic/processes, presentation tables/fields, users would be able to see in their reports. Basically, this could help you create various management reports. Administration tool is used to create this and so you need to connect to it in the future. (SampleAppLite being the .rpd by default at installation, you are able to see that only now).
Hope this helps you understand the concept. I'm sorry, if I am wrong here.
Thank you
Diakité -
How to synchronize the metadata of LR to bridge
Hello. I have W7 64 bit, CS5 with ACR6.1 and LR 2.7. My Leica camera capturing in DNG natively. I use "Convert to DNG" import in order to take advantage of the lossless compression. I understand that the XMP sidecar files are not applicable and that the metadata is written into the header DNG. It's good for me, it should ensure that the metadata is always with my DNG, but I'm not sure how it affects the validity of any instructions, I found so far.
Currently I use ACR and LR to develop files to take advantage of the new features and treatment until I can get LR3.
I want to synchronize the development parameters. I learned to updated the metadata of files developed in ACR6.1 when I open them in LR2.7 but I can not work, how do the LR develop visible settings when I open the files in Bridge.
Any suggestions would be greatly appreciated. I was unable to find the information in the forums or help so far.
I'm also not sure if this is the best forum to post this, but he did not cross the. If I am better publish it on another forum, please excuse me and suggestions would be welcome.
If you want a set folder to update faster, go to tools/cache/purge cache for folder xxx. Let the inch rebuild foremost (in corner he'S spinning arrow).
-
Update the metadata of HFM 11.1.2.3
Hello
I update the metadata in HFM application. Version - 11.1.2.3 Classic application. I extracted the HFM workspace metadata and update dimension members by using the HFM desktop client.
What will be the impact on the data if I'm changing the hierarchy in the app metadata file (I'm not remove all members.) Just create new members and change the hierarchy of existing members)? It erases data from HFM applications after loading the metadata file updated through the workspace?
Thank you
Michel K
Hello. Your level of database will not be affected if you do not remove members at the basic level. For members of parent, if you change the descendants, it depends. If account or custom dimensions, everything is recalculated in the memory as requested, so the change is retroactive. For entities, it depends on if you help org by period and/or parent entities of locking. If one or both of those, entity hierarchy changes generally will not be affected. If you do not either of them, the hierarchy is affected, but you will need to rebind the data in order for the changes to be aggregated.
Eric
Maybe you are looking for
-
Question aboput using the recovery disk
If I use the recovery disk, it will remove the Toshiba assist installed on my pc? I don't have the tools and disk utilities. Thank you
-
Satellite A200 - 1 M 8 - Windows XP backup restore
Hey there. I currently own Toshiba Satellite A200 - 1 M 8. Windows XP Professional SP3I read your newsletter support and accordingly, I can see that you recommend backup of files and etc... through the integrated Windows XP Backup utility. 1. you say
-
HP2000 2B10NR: Cyberlink Media suite
My laptop was running 64-bit Windows 8 and then I updated to Windows 10 64 - bit. After a few additional updates. I ended up losing my Cyberlink Media Suite. I have the original recovery disks. But I really want to start all over again. Is anyway to
-
DC motor of control using the analog output of DAQ 6008
Hello Since the 6008 DAQ implements not good PWM, can I control the speed of the DC motor using outputs analog, protected by amplifiers? This will damage my DAQ?
-
I have download the 'theft' and get a 8007013dI error
I have download the 'flight without problem and when I go to activate the sim card I get a 8007013d error I also put the program on my computer in my office and when I turn it off my computer! help I am running xp pro. In 30 years with a program neve