The screen is empty, my used to start Satellite

Similar Questions

• Re: TV TOSHIBA 26EL800A - TV is on, but the screen remains empty

  Hi all

  I have a Toshiba TV 26EL800A purchased in May of this year. Tried to turn on the TV using the remote control mode standby (red light) to on (green light) that has the remote control - the screen remains empty (as there is no power) and after a few seconds the light changes again red - standby again.

  Tried this using the keys on the TV as well and the same thing (have checked batteries for remote control, checked PowerPoint (my dvd player works the same record 2 and it works) but don't know what else is causing the screen lights?)

  Any suggestions?

  I put t really know if you can find the solution here on the computer systems forum.
  What you can try is to unplug TV, leave for a while and check again.

  If the same thing will happen again and again I recommend to contact your local dealer and ask for help or contact the provider of Toshiba directly.

• my taskbar has moved to the top left corner how to bring back to the original position, which means at the bottom of the screen. I am using microsoft windows xp

  my taskbar has moved to the top left corner how to bring back to the original position, which means at the bottom of the screen. I am using microsoft windows xp

  Right-click on the taskbar and unlock it. Take an empty place and slide it downwards. Lock the taskbar.

• I had checked "extend my desktop to this monitor". I have only 1 monitor though. Now the screen is empty. I rebooted the pc in the hope to go in safe mode but the screen remained blank.__How can I go back to single screen? __

  I had checked "extend my desktop to this monitor". I have only 1 monitor though. Now the screen is empty. I rebooted the pc in the hope to go in safe mode but the screen remains blank.
  How can I go back to single screen?

  Hi Bilipino,

  You have more than one display card? Try to connect your monitor to the another card and see if you can get the display.

  Reference: http://www.microsoft.com/windowsxp/using/setup/hwandprograms/monitors.mspx

  I hope this helps...

• I have a Dell Inspiron 1545 and I can't download Adobe flash or Adobe acrobat reader, when I try to play my games it says upgrade from flash and when I try to download it on the screen comes empty

  I have a Dell Inspiron 1545 and I can't download Adobe flash or Adobe acrobat reader, when I try to play my games it says upgrade from flash and when I try to download it on the screen comes empty

  Try offline installers:

  • Flash Player ActiveX (Internet Explorer)
  • Flash Player plug-in (all other browsers)

  For Adobe Reader: http://get.adobe.com/reader/enterprise/

• all my icons disappeared completely, impossible to go to start... the screen is empty expect to connect to the internet

  fix Windows he had run, but still no visible icons

  Follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Regulation the screen showing empty in iphone 5 s

  My settings > General > regulatory screen showing empty (check screenshot below) is there someone tell me why it's like that

  

  It may be a bug or something like that. Try restarting/resetting your phone. This will not erase your data stored on that device.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

  If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

  Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

• Stuck on the screen of HP recovery and cannot start windows

  HP Pavilion
  Model: 17 - 1215dx
  
  If you need the serial number or the fn, just ask. I didn't post too much sensitive information.
  
  It was originally 10 64-bit windows... but now has 8.1 Windows 64-bit
  i5 8gig of RAM processor
  
  Literally just close the lid and open it upwards and it wouldn't boot windows. It is stuck at the screen HP saying it's diagnose my problem. Tried a soft reset and a hard reset when you remove the battery and put it again while it is unplugged. Did not help. I can't start in safe mode. I tried to do a restore which has been a success but it restarts when he says "there was a problem, restart your PC. I'm frustrated and reset a factory and the same factory reset was successful and was when he came back to 8.1 because it's the OS, I bought it with but then it still wouldn't let me in windows. I was going to try and start to repair, but if I had known this would require an administrator I'd never have done the factory reset. I know I've been reckless, but I just wanted to work. But yes, I don't know what the problem is. I feel like if it was a hardware problem is just something to keep windows to operate. Should I try a repair disk? Would that help?

  The SecretLight

  Hello;
  
  Let me welcome you on the HP forums!
  
  I read your post you need to grab your laptop and wanted to help - but we need more information.

  You said that your laptop came originally with Win10, but then later, you said you tried to go back to Win8.1, you can then said, it's the original OS.

  So, who was the original - Win8.1 or Win10?

  Ask because if it came with Win8.1 and you UPGRADED to Win10, while Microsoft tells you that there is no risk in the upgrade of Win10, because they allow you to believe that you can always go back to your original OS and setup within 30 days, the ugly matter faction is that the Win10 GoBack feature turned out to be unreliable - and when it fails She can let the machines in a corrupt State - which is not always the case, it happens often enough to be a problem, but you will get no warning beforehand that he goes to the trash your PC!
  
  The Win10 upgrade is known, in some cases, corrupt the partition of recovery that are stored by the OEM that built the original machine.  It's pretty much guarantee that no HP recovery will work.
  
  What will work restores your computer to its original factory state using HP recovery media. It is a set of DVD and a CD or a USB key, which will erase the hard drive (removing all data, applications and settings, reinstall the original OS, drivers and utilities for HP. In some cases, you will be able to order a USB instead of discs.  You must order at HP; they cannot be downloaded.
  
  You can look online for recovery from the paged media related: http://support.hp.com/us-en/drivers
  
  Once there, enter your product name or number. On your software page and download the drivers, select your operating system and version. Click on "Update".  If the HP recovery support is available for your computer, down near the bottom of the page, you will see an entry for the command Recovery Media-CD/DVD/USB. Click on the symbol '+' to expand this entty and click on order to press for more details.
  
  Or, if you prefer, you can do the same by contacting HP Customer Service:
  
  If you live in the United States or the Canada, details are on this page: http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1
  
  If you live elsewhere, contact details are on this page: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
  
  NOTE: once you get through, stay on the line until you are finally able to talk to someone ' one - it can take a while!

  Good luck
  ========================================================================
  I'm a volunteer and I do not work for, or represent, HP.
  ---------------------------------------------------------------
  If my post helped you, please click on the thumbs-up symbol to say thank you.
  If my posts resolved your issue please click "accept as a Solution.
  ========================================================================

• Cursor moves on the screen and without entrance music will start to play

  I have two dell - a desktop and laptop computers. We have ATT uverse service of broadband ISPS. My phone receives the signal of a wireless router. Several times, I looked down my laptop and noticed the cursor "darting on the screen. In addition, on occasion, without any input from anyone, audio advertising or music started playing. I have McAfee security and my wireless signal is supposed to be encrypted. Have you ever heard such a thing? It's a little scary!

  Original title: WEIRD ACTIVITY

  Hi, Bandaid99,

  To rule out malware, download the following tool and run a scan complete

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&id=16

  (1) is the own mouse?

  (2) is it a phone, cell phone, or come close to the mouse?  Their distance.

  (3) is it the humidity or lotion on your hands when you use the mouse?

  (4) the drivers are up to date?

  (5) can you test with another mouse?  Disable the touchpad and start again with the mouse.

  (6) open the Device Manager and uninstall the mouse driver.  Restart windows

  Right click on desktop

  Select customization

  Select the mouse pointers

  Uncheck the enhance pointer precision

  Click on apply, Ok

  Retry using the mouse

  When you hear the sound, you have a page (s) open where the sound may come from ads on the page?

  Update using Device Manager sound card drivers

• Change the screen of welcome/opening of session start on Satellite L500

  Hi - just bought laptop for my son (the Satellite L500 - 19 X with Win7 Home) preloaded and getting ready for Christmas.

  The logon screen is the Toshiba logo with a white background. This makes shaded police fall very hard to read which is used for usernames; and the "change user" list after < ctrl alt del > etc.
  What is the name of the file that produced this wallpaper of connection please so that I can replace to make the text legible?

  Note: the same question on the desktop, but this can be avoided by unchecking the box "shadow" in Visual effects & change the wallpaper.

  Thank you very much

  Hello

  I googled a little and found this:
  http://www.withinWindows.com/2009/03/15/Windows-7-to-officially-support-logon-UI-background-customization/

  The procedure is a little but delicate.
  You must change the registry.

  -Beginning of registry (Regedit.exe)
  -go to
  HKEY_LOCAL_MACHINE-Software-Microsoft-Windows-CurrentVersion------authentication------LogonUI------background

  -Create a new DWORD value named OEMBackground
  -Double-click OEMBackground and set its value data to 1
  -Access register

  This allows you to include the screen background image (jpg)

  In C:\Windows\System32\oobe\info\backgrounds, you could include the jpg file.
  The file should be named backgroundDefault.jpg + +.

  Note: info and background folders don't exist by default. You must manually create these records. In addition, the images must be less than 256 KB!

• Qosmio F60 - change the screen settings when you use the DVD player

  When I try to play a DVD using the DVD BD player a message that tell me to change the setting of the screen I followed their instruction to no availo. I am running Windows 7. The DVD plays on windows ok support.

  Any help would be appreciated

  Hi ametec.

  This DVD BD drive has been preinstalled on your computer?
  Which message get you exactly? Maybe you can download a copy of screen or something else

  In my opinion this problem is only related to this because the Media Player DVD player everything works
  For example, I use VLC media player for all my audio and video files. It s a small freeware player that can play most audio and video files. In addition it s not necessary to use a special DVD playback software.

• By specifying the screen coordinates in printf using LabView RT 2009

  According to the 2011 help in LabView documentation 'Printf (Manager of LabVIEW function)", the character of the conversion of 'q' is supposed to refer to a point. The actual help text is "q Point (passed by value) as %d, %d, representing the coordinates horizontal, vertical. It is a valid conversion for LabView RT 2009 character? If so, then someone has an example of using these characters to print at line 10, column 1 on the console? I tried a lot of combinations like: printf ("% dqTest Row", (10.1)), etc.

  LabVIEW Real-time has not intrinsically a "console" - it has an "output stream.  There is no API added to allow you to jump all over the console in native mode (don't cross the streams) - you can't even do it with the functions of Manager of LabVIEW (literally, it prints a point in this place of pixel, not text).

  Now, I tell you this, but if you happen to have a target with a video memory (like a PXI system, certainly NOT a cRIO or PCP) and you happen to know the address of where the video memory is on your 0x0B8000 system, you can directly write ascii characters on the screen specific areas - just as they did in the days of DOS.

  #include 
  #include 
  
  void VGAChar(unsigned int row, unsigned int col, char c, unsigned char attr) {
      static volatile char *video_mem = (char *)0x0B8000;
      unsigned int pos = ((row * 80) + col)*2;
  
      video_mem[pos] = c;
      video_mem[pos+1] = attr;
  }
  
  void VGAString( unsigned int row, unsigned int col, char * str, unsigned char attr) {
      int i = 0;
      while (str[i] != '\0')
      {
          VGAChar(row+(col+i)/80, (col+i)%80, str[i], attr);   /* print each character */
          i++;
      }
  }
  
  int main (void)
  {
      char buffer[ 100 ];
      sprintf( buffer, "Hello, my DOS world!" );
      VGAString( 10, 10, buffer, FOREGROUND_BLUE | FOREGROUND_RED );   // prints in PURPLE at ROW 10, COL 10.
  
      return 0;
  }
  

  Of course, I don't condone this and it is certainly NOT taken in charge (and only works on targets based on the PharLap with a video console), but there is a lot of fun.

  -Danny

• Pavilion: How can I stop the screen size change when using mouse pad

  I continue to adjust the size of the screen inadvertently when using the mouse pad - how to turn off this feature?

  Hello

  You can change this as follows.

  Open windows control panel and on the top right, next to the display by: select "large icons".  In the new page layout, select the entry of Synaptics.

  The option you're looking for is called "Pinch Zoom" - see image below.  Remove the checkmark against this article, click on close in this window, then apply then Ok in the previous window to save this change.

  

  Kind regards

  DP - K

• How to move around the screen (image) when you use a tool?

  I know there's a shortcut and I forgot, I am using the magnetic lasso tool and when I need to move the image on the screen because it's much bigger than what I see through a detailed selection. I know there are a few keys to insist the hand tool appears, someone knows what they are?

  Thank you!!

  Space bar.

• Can we build the dimensions in empty plan using "DynamicDimensionBuild" meth

  Hello... IAM trying to build the dimension in contour which is empty using 'dynamic dimension Build' method... is that the error is "outline of the database is empty.
  But every time contour contains one or more dimensions, then I can build another dimensions using the dynamic dimension build method... I doubt that is empty contour allows the dynamic dimension build method...?
  
  Thank you and best regards,
  Sri............
  
  Published by: Sri-Oracle on March 20, 2009 06:37

  Hi Sri,

  Empty contour allows the dynamic dimension build method, when your plan is empty, essbase juz get this message.

  Thank you
  Kishore