The second instance to copy a single value of first instance.  All the following normal law.

Similar Questions

• ERROR: The specified parameter 'Rental' expects a single value, but your name criteria "PROD" corresponds to multiple values.

  Hello

  I am writing a script to create the new VM (base clone of a virtual machine) in a specific folder.

  When you run the script, I get an error:

  The specified parameter 'Rental' expects a single value, but your name criteria "PROD" corresponds to multiple values.

  Some research led me to a post of 2011, which describes the same error. The only thing is, I can find no trace of open connection and then a more...

  What I tried:

  I run the script on the server for vSphere, so I closed the open vSphere client.

  closing ('disconnect-viserver") all existing connections in the first line of the script-> an error because no connection is open.

  In several places in the script, add the following lines:

  ECHO ' - '.

  $DefaultVIServers <-as noted in the post of 2011

  ECHO ' - '.

  This shows that no connection is open until I do the "connect-viserver", subsequently, apparently, that a connection is established.

  the results and the (current) script are found in the files to attach.

  I also found an error on the "set-PowerCLIConfiguration that I can't explain.

  One last question... Is there a possibility to have the new virtual machine created through 3 hosts? the first on the first host, the second on the second, the third on the third, the fourth back on the first host,... and so on?

  Any help would be appreciated.

  Thank you.

  Johan

  Of course, you can provide the full path, for example see my post of folder by Path .

• How to call a second instance of the same VI?

  Hello

  I have a useful VI dealing with IO operations. To save some time, of what I would call the VI as a second instance do work at the same time. I created a sequence sub with the run option 'Use the new thread' and I called the Vi (a step of the sequence only). Execution time of the VI is about 20 seconds run Durin I called the subsequence and I carried on running my main sequence (parent). Since then 10 seconds to launch the subsequence (in the thread of sepatate I called the same VI as in the thought of subsequence the second instance will be created. However, instead of parallel work of the two instances of the same VI had to wait when mt subsequence end known call the VI th.

  So my question is, as in the topic: how to call a second instance of the VI even at the "same time"?

  Could you please tell me about the best approach to solve the problem?

  Any VI that you want to run in parallel must be paid also re-entrant, including screws.

• When I try to copy a single file (for example: size of 1 GB) drive hard to any what external memory device via the USB port, the copy process takes several hours to complete

  I use a DELL Studio 15 laptop computer. When I try to copy a single file (for example: size of 1 GB) hard drive to any external memory device (for example: USB key or external hard drive) via the port USB, the copy process takes several hours to complete. I have checked the viruses using McAfee Antivirus, but could not find. Can someone suggest me a solution?

  Hello

  ·          Were there any changes made to your computer before this problem?

  Step 1: Format the external device to the NTFS format and check if the problem persists.

  See: http://windows.microsoft.com/en-US/windows-vista/Convert-a-hard-disk-or-partition-to-NTFS-format

• Install the second instance with tns own

  Hello world

  I depending on the situation: we have Windows 2008 Server, I installed oracle 11g Standard Edition database. I want to install a second instance on this server.

  I try to use oracle database configuration manager and the installation was successful. But I can't connect to my trial because I got the error 'No TNS Listner'.

  So I create a second with the oracle network utilities. But I can not connect to the server, so I take a look at the service, there where two headphones started my new and TNSListener so I looked in the listener.ora there where only my new listener.

  After that, I restart the database but I sill got the error message and I could not service my trial dbconsole.

  So I remove the second instance.

  I want to ask if anyone has a tip for me or a best practice how to install a second instance with an own listener.

  Greetings

  How to install a second instance with an own listener.

  You need a listener of the second. Simply create the new database and your real listener is more than enough.

• travel-vmhost error - the destination of the specified parameter expects a single value

  I run in an error using Move-VMHost under PowerCLI version 5.5 R2 Patch 1 and 5.8 Release 1.

  There are 6 clusters in the data center.  To the host of the virtual machine between 5 of the clusters that I can run successfully:

  Get-VMHost vmhostname | Moving-VMHost Destination 'NOMCLUSTER '.

  But one group in particular always fails when it is specified as destination of the error message:

  The specified parameter "Desintation" expects a single value, but your criteria of name "cluster6" corresponds to multiple values.

  The only way I can get this working is to do:

  Get-VMHost vmhostname | -Move Destination VMHost (get-cluster | where {$_.name - eq "cluster6"})

  How 'cluster6' could correspond to several cluster names?  Is this just a bug in PowerCLI?  I started using PowerCLI more recently and noticed that some cmdlets can be a bit odd (for example had a few other problems with Get-VMHostStorage and found others have had similar problems with it).  I use this process of moving part of a more automated deployment script.  Prefer to make it as efficient as possible without having to insert the extra if possible Get-Cluster command.

  The Destination parameter on the Move-VMHost cmdlet accepts any VIContainer, not only the clusters.

  I suspect it could VIContainer one another with the same name.

  What this does?

  Get-inventory-name 'cluster6 '.

• Access to the second instance of the database on the same host (ORA-12514) problem

  Hello

  I had a database of what ICMDB installed on my machine. After that, I created a second instance of database (Service name: BI_APPS) using DBCA on the same machine. With the help of NETCA I also created a new OracleOraDb11g_home1TNSListenerBI_APPS_LISTENER listener on port 1522 on my machine. Then I configured this listener to listen to the connections to the service BI_APPS by adding the following to my tnsnames.ora:

  BI_APPS_LISTENER =

  (ADDRESS = (PROTOCOL = TCP) (HOST = 192.168.2.109)(PORT = 1522))

  Then I changed the port in my driveway tns to BI_APPS at 1522 as follows:

  BI_APPS =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP) (HOST = 192.168.2.109)(PORT = 1522))

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = BI_APPS)

  )

  )

  I then restarted the following services:

  OracleOraDb11g_home1TNSListener

  OracleServiceBIAPPS

  OracleOraDb11g_home1TNSListenerBI_APPS_LISTENER

  After that, when I try to access my first ICMDB DB through Toad, the connection is successful. However, when I try to access the service BI_APPS I get the following error:

  ORA-12514: TNS:listener is not currently of service requested in connect descriptor.

  What I am doing wrong? Here are the contents of my files:

  
  

  ----------------------------------------------
  

  TNSNAMES. ORA

  
  

  tnsnames.ora # Network Configuration file: D:\app\Oracle\product\11.2.0\dbhome_1\network\admin\tnsnames.ora

  # Generated by Oracle configuration tools.

  BI_APPS_LISTENER =

  (ADDRESS = (PROTOCOL = TCP) (HOST = 192.168.2.109)(PORT = 1522))

  BI_APPS =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP) (HOST = 192.168.2.109)(PORT = 1522))

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = BI_APPS)

  )

  )

  LISTENER_ICMDB =

  (ADDRESS = (PROTOCOL = TCP) (HOST = 192.168.2.109)(PORT = 1521))

  ORACLR_CONNECTION_DATA =

  (DESCRIPTION =

  (ADDRESS_LIST =

  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))

  )

  (CONNECT_DATA =

  (SID = CLRExtProc)

  (PRESENTATION = RO)

  )

  )

  ICMDB =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP) (HOST = 192.168.2.109)(PORT = 1521))

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = icmdb)

  )

  )

  -----------------------------------------------------------------------

  SQLNET. ORA

  sqlnet.ora # Network Configuration file: D:\app\Oracle\product\11.2.0\dbhome_1\network\admin\sqlnet.ora

  # Generated by Oracle configuration tools.

  # This file is actually generated by netca. But if customers can opt for

  # install 'Software Only', this file does not exist and without the native

  authentication #, they will not be able to connect to the database on NT.

  SQLNET. AUTHENTICATION_SERVICES = (NTS)

  NAMES. DIRECTORY_PATH = (TNSNAMES, EZCONNECT)

  ------------------------------------------------------------------------------------

  LISTENING PORT. ORA

  listener.ora # Network Configuration file: D:\app\Oracle\product\11.2.0\dbhome_1\network\admin\listener.ora

  # Generated by Oracle configuration tools.

  BI_APPS_LISTENER =

  (DESCRIPTION_LIST =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP) (HOST = 192.168.2.109)(PORT = 1522))

  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1522))

  )

  )

  ADR_BASE_BI_APPS_LISTENER = D:\app\Oracle

  SID_LIST_BI_APPS_LISTENER =

  (SID_LIST =

  (SID_DESC =

  (SID_NAME = CLRExtProc)

  (ORACLE_HOME = D:\app\Oracle\product\11.2.0\dbhome_1)

  (= Extproc PROGRAM)

  (ENVS = "EXTPROC_DLLS=ONLY:D:\app\Oracle\product\11.2.0\dbhome_1\bin\oraclr11.dll")

  )

  )

  ---------------------------------------------------------------------------------------------------

  Here's the lsnrctl status output

  LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 12 December 2013 16:17:01

  Copyright (c) 1991, 2010, Oracle.  All rights reserved.

  Connection to (ADDRESS = (PROTOCOL = tcp)(HOST=) (PORT = 1521))

  STATUS of the LISTENER

  ------------------------

  Alias LISTENER

  TNSLSNR for Windows 64-bit version: Version 11.2.0.1.0 - Production

  Start date December 12, 2013 10:34:35

  Uptime 0 days 5 h 42 min 26 s

  Draw level off

  Security ON: OS Local Authentication

  SNMP OFF

  Listener parameter File D:\app\Oracle\product\11.2.0\dbhome_1\network\admin\listener.ora

  D:\app\oracle\diag\tnslsnr\ICMDEVDB\listener\alert\log.XML log listener

  Summary of endpoints listening...

  (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=ICMDEVDB) (PORT = 1521)))

  (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=192.168.2.109) (PORT = 1521)))

  Summary of services...

  Service 'BIAPPSXDB' has 1 instance (s).

  'Biapps' instance, State LOAN, has 1 operation for this service...

  Service 'BI_APPS' has 1 instance (s).

  'Biapps' instance, State LOAN, has 1 operation for this service...

  Service 'icmdb' has 1 instance (s).

  'Icmdb' instance, State LOAN, has 1 operation for this service...

  Service 'icmdbXDB' has 1 instance (s).

  'Icmdb' instance, State LOAN, has 1 operation for this service...

  The command completed successfully

  OK I solved this.

  Apparently, the machine restart is necessary after the creation of the new instance. I have created a new instance, restarted Windows and Bingo!

• [4EA2] connecting to SQL Server with the second instance

  Connection to the early work of the Forum very well and I can choose the DB for this instance.

  There is a second instance... In the ODI driver, can I use this syntax

  JDBC:WebLogic:SQLServer://Server \instanceName_Reporting:1433

  I tried to enter the host name server\instanceName tab in SQL Server... It does not work... Does not the 3.2 Developer either.

  Any ideas?  I don't know what the custom jdbc url must be if I tried to use the Advanced tab.

  Found the answer

  In the port field enter

  1433/database; instance = second instance

  3.2 I did not change any how xml, it works as it is.

• Add the second instance in Enterprise Manager 10g database control

  Hello
  
  I have a server with an Oracle 10 g database instance and I
  set up local control of Enterprise Manager database for it.
  Now, I added a second instance on the server, using the same Oracle
  Homepage. Can I manage this new instance by using the existing database
  control or I have to configure a control second database help
  another port? The documentation is not too clear on that.
  
  Thank you
  Matthias

  You must configure another service of control of database for this on the other port.

  Better to use control grid to manage multiple instances.

• "expects a single value / corresponds to multiple values" error script New - vm in PowerCLI

  I have been responsible for creating some 800 + virtual desktops so, naturally, this is something I want to script.  After reading through the large bases of knowledge here, I was able to create what I thought, it was the correct code.  It worked when I was just "write-host" ing lines command to see if the variable creation/uasge worked well.  When I removed the lines of write-host and tried to use the actual orders new-vm, I started having different "of the specified parameter '$vmhost' expects only one value, but your criteria of name ' xxx - vm53.yyyyyyyyy.com' correspondingponds to several values." errors.  Here is my code, marked specificities:

  Add-PSSnapin VMWare.VimAutomation.Core # PowerCli add script environmen t
  $creds = get-vicredentialstoreitem-'c:\temp\credfile.xml' # chopped access file password to authentice with "sys" service account from the file
  connect-viserver-Server $creds.host-$creds.user username-password $creds.password
  $host1 = get-cluster "HVD1" | get-vmhost | Tri-objet "memoryusagemb" | Select-object - 1 first | foreach {$_.name} # get the VMWare hosts with less use of the memory of the cluster host "HVD1" registration
  $dstore = get-datastore ' vdi_ * ' | Tri-objet 'FreeSpaceMB' - descending | Select-object - 1 first | foreach {$_.name} # Get datastore disk with most freespace to be VDI_ *
  $VMBaseName = "XX-P01-HVD" # definition of trade names XenDesktop hosted
  $Template = get-model model-CBD-XD-XP | Select-object - 1 first | foreach {$_.name} # Setting for XenDesktop hosted Commercial model
  $OSCustSpec = "CBD - XD XP" hosted # Setting for hosted Commercial XenDesktop customization script
  $loc = 'Desktop' # configuration for XenDesktop folder
  $ResPool = get-resourcepool XX-P01-HVD | Select-object - 1 first | foreach {$_.name} # XenDesktop hosted Commercial resource pool setting
  [int] $FirstNumber = 0
  [int] $HostTotal = 0
  [int] $ctr = 0
  
  $FirstNumber = Read-Host "enter the first digit to the VMWare host range".
  $HostTotal = Read-Host "enter the quantity for the VMWare host range".
  $HostNumber = $FirstNumber
  $HostFinal = $HostNumber + $HostTotal
  
  do {}
  $vmname = $vmbasename + $HostNumber
  new-vm - vmhost $host1-name $VMName - $ResPool - $loc location ResourcePool - datastore - slim - DiskStorageFormat $dstore model $template - OSCustomizationspec $OSCustSpec # Execute the new VMWare host creation
  Start-vm $VMName # start the virtual machine to start the customization process
  $HostNumber ++
  $ctr += 1
  If ($ctr - eq 5) {write-host write-host "break 10 Minutes' sleep s 600; $ctr = 0; write-host} # sleep for 600 seconds every 5 VMs to avoid overloading ESX hosts
  } until ($HostNumber - eq $HostFinal)

  Here are my mistakes:

  
  New - VM: 23/03/2011-17:42:22 new-VM parameter specified "VMHost.
  expects a single value, but your criteria of name ' xxx - vm53.yyyyyyyyy.com' corresponding
  ponds to multiple values.
  To C:\temp\xx_deploy.ps1:31 character: 7
  + new-vm < < < <-vmhost $host1-name $VMName - $ResPool - $l location ResourcePool
  OC - datastore - slim - DiskStorageFormat $dstore model $template - OSCustomizat
  creating # ionspec $OSCustSpec of the new VMWare host Execute
  + CategoryInfo: InvalidResult: (System.Collecti... dObjectInterop)
  (]: List 1) [new-VM], VimException
  + FullyQualifiedErrorId: Core_ObnSelector_SelectObjectByNameCore_MoreResu
  ltsThanExpected, VMware.VimAutomation.ViCore.Cmdlets.Commands.NewVM
  
  New - VM: 23/03/2011-17:42:23 new-VM parameter specified ' Resourc
  ePool' expects a single value, but your name criteria is "XX-P01-HVD.
  multivalued.
  To C:\temp\xx_deploy.ps1:31 character: 7
  + new-vm < < < <-vmhost $host1-name $VMName - $ResPool - $l location ResourcePool
  OC - datastore - slim - DiskStorageFormat $dstore model $template - OSCustomizat
  creating # ionspec $OSCustSpec of the new VMWare host Execute
  + CategoryInfo: InvalidResult: (System.Collecti... dObjectInterop)
  (]: List 1) [new-VM], VimException
  + FullyQualifiedErrorId: Core_ObnSelector_SelectObjectByNameCore_MoreResu
  ltsThanExpected, VMware.VimAutomation.ViCore.Cmdlets.Commands.NewVM
  
  New - VM: 23/03/2011-17:42:23 new-VM parameter ResourcePool: could not
  t find any object specified by its name.
  To C:\temp\xx_deploy.ps1:31 character: 7
  + new-vm < < < <-vmhost $host1-name $VMName - $ResPool - $l location ResourcePool
  OC - datastore - slim - DiskStorageFormat $dstore model $template - OSCustomizat
  creating # ionspec $OSCustSpec of the new VMWare host Execute
  + CategoryInfo: ObjectNotFound: (VMware.VimAutom, ol ResourcePo)
  OL:RuntimePropertyInfo) [new-VM], ObnRecordProcessingFailedException
  + FullyQualifiedErrorId: Core_ObnSelector_SetNewParameterValue_ObjectNotF
  oundCritical, VMware.VimAutomation.ViCore.Cmdlets.Commands.NewVM

  I had multiple values for some of the entries, that's why I tried to analyze with the first '-1' and outside the script, the values return very well.

  Any help?
  

  And this is the cause of the problem.

  You feed the New - VM name in fact only 1, and the cmdlet, by OBN, tries to resolve the name into an object.

  But since there are 2 connections, it will get an object returned by each connection.

  Where the multiple value message.

  Check if you have several Connect-VIServers in the script and maybe close all connections before the script starts.

  Or switch to simple mode with the Set-PowerCLIConfiguration cmdlet.

• Retrieve a single value from a file .lvm

  I have a large batch of files of worksheet whose name is a timestamp. I am writing a program that will get the value of a specific cell (the same cell in each file), coupled with the timestamp and each of them as a pair of coordinates, then save in a master spreadsheet. The goal is to extract a point each of the 700 files I and compile them into a single file.

  However, I've never used Labview to read the files before. I saw some stuff on how to read an entire worksheet in a table, but I was wondering if there was a way to say to Labview to look into a file and extract a single value. I open .lvm in Excel files, so, in my mind, I would be taking, for example, cell D2. Is this feasible? Should I read the entire worksheet in an array and use the index to pick it up on the table? If I do, how I would specify cell J2 as an array index (I have no experience with the berries in Labview either). In addition, if you have any tips on how to record easily 700 pairs of coordinates, that came together in the order, to a single spreadsheet, that is my next task.

  Essentially- I need to extract a single value of a spreadsheet in, ideally, the simplest possible. In addition, pointers on how to save the numbers gathered at each iteration of a while loop to a single worksheet are welcome.

  Thanks in advance for the help!

  FYI I have LabView v8.6

  You can't say LabVIEW to 'out' a specific 'cell' more you can tell Notepad to do. the .lvm files are just text files. When you open them in Excel, the column separator (default tabs) show to put the values in columns. In LabVIEW measurement file VI reading to read .lvm files. It creates the dynamic data, wrong data type that is next to useless. You will need to convert this type of data in a table by using the function convert of DDT. Or, you can use the VI read spreadsheet file. This will give you a table directly. You can just remove the specific item using the table to Index.

• How to make the current value by default to all controls both

  Choose 'Data Operation'-> 'Do current Default value' to several controls requires a lot of clicking. Is it possible to do so with a single click?

  Yes.  If you select no control, he says 'Do the current default values' and it does all the controls at the same time.  If you have a control is selected, then it does so only the selected controls.

  Reset the current values default works in the same way.  Do not select anything, he does all the controls at the same time.

  Bob Schor

• How to write a single value in an excel spreadsheet

  Hello

  I use an excel spreadsheet, as if it were an external code module. He does a lot of calculations, all I do is write an individual value, let calculate what it should only then read a return value from this.

  I already have a structure able to read a table, but could someone help me with a piece of code that could write a single value?

  (To read a value unique too may be practical)

  Also, I have the new LabVIEW 2009, so while a fancy to drop some code here as one. PNG, it would be nice to see if this new feature works!

  Thank you, Alec

  Try this. There are 2 point methos (get) and point (put) to read and write the value respectively to a cell in excel.

  Good luck

• When Microsoft Excel loads the following error occurs: Error 1406 Setup cannot write the value in the \xlsx registry key.

  I have Windows XP on a PC, I bought at the beginning of 2009.  I have been using Microsoft Office applications with no problems until now.  When I try to open Excel, the following events occur: 1) a presentation box appears and poster - "Please wait while the window configures Microsoft Office Home and Student 2007.  Collection of the required information.   2nd) another box displays the following message: Error 1406 Setup cannot write the value in the \xlsx registry key.  Make sure you have sufficient permissions to access the registry or contact the Support Services technical Microsoft (PSS) for help.  For more information about how to contact PSS, see PSS10R. CHM.
  3rd, the next area said cancel, start over or ignore.   Retry and ignore just redisplays the same message box again.  When I click Cancel, the following error message is displayed - fatal error during installation.   I do not understand why this is happening since 1) I've been using Excel for quite a while and 2) I'm not trying to install office as it was installed on my PC when it came from the manufacturer (Dell).  Also, I have no problem with the opening of other Office programs.  I am the only user on this computer.  Help, please!  Thank you, Dennis

  Okie dokie.

  Well I dug on the web and found someone with the same problem, and they said that when they have disabled "McAfee VirusScan 8.5 Access Protection", this error has disappeared. If this applies to you, give it a whirl if you wish.

  But the best support that I found came from this website: http://support.microsoft.com/kb/838687. The jist of it is (trying to fix it yourself):
  Fix it myself to fix this problem yourself, follow these steps:

  1. Log the computer by using an administrator user account.
  2. Start Microsoft Windows Explorer.
  3. On the Tools menu, click Folder Options.
  4. Click the view tab.
  5. Under hidden files and folders, click Show hidden folders and files.
  6. Clear the Hide extensions for known file types check box, and then click OK.
  7. Open the following folder: C:\Documents and Settings\All Users\Application Data\Microsoft\Office\Data\
  8. If you are running Office 2003, right-click Opa11.dat, and then click Properties. If you are running Office XP, right-click Data.dat, and then click Properties.
  9. Click the Security tab.
  10. Click Advanced.
  11. Click the permissions tab.
  12. Click to select everyone in the list entered permissions and then click change.
  13. Click to select the full control check box.
  14. Click OK three times. If these steps do not resolve this issue, delete the Opa11.dat file or the Data.dat file in the following folder and then restart an Office 2003 program or an Office XP program:
      C:\Documents and Settings\All Users\Application Data\Microsoft\Office\Data

      If this does not work for you, I would take my installation CD< completely="" uninstall="" microsoft="" excel="" (or="" any="" other="" problems="" that="" are="" giving="" you="" this="" error),="" then="" install="" microsoft's="" windows="" installer="" cleanup="" utility="" (which="" completely="" removes="" all="" stuff="" pertaining="" to="" whichever="" program="" you="" delete,="" for="" you,="" excel)="" and="" then="" reinstall="" microsoft="" excel.="" this="" utility="" program="" is="" really="" powerful,="" and="" you="" can="" download="" your="" copy="" from="">http://support.microsoft.com/kb/290301.

      So, here are three options for you to try. I hope one works for you - let me know it to be.

  -Carson

  P.S. - KC Chiefs? Colts all the way! :)

• How can I open a second instance of Notepad ++?

  I'm trying to set up a training put in place with the my code in Notepad ++ on one screen and a second screen, for students to see, is to be an empty instancve of Notepad on which I can write the code to show HTML.

  I was told to activate him "never combine" option under properties int eh taskbar then I should be able to click the bat task to have the instance of secopne.  I tried this ob win 7 and win 8.1 but neither worked, I got a flashing task bar icon,.

  Let's see it, works well.

  Multiple Instances of Notepad ++

  With this, holding SHIFT and double-clicking the icon shortcut opens a second instance.