Add the second instance in Enterprise Manager 10g database control

Similar Questions

• Try to add the second DC to vCenter instance.

  All the:

  I am sure there is a way to add a second "Datacenter" in one instance of vCenter, when the second domain controller is managed by its own server vCenter. Our current situation is that we have two physically separated data centers, both running vSphere 5.0. We would like to make sure he say for example my vCenter instance can see the other DC and its resources, but that stay DC managed the instance of vCenter that is local, not mine.

  Is this possible? I forget something here? I have no problem creating the DC object, but when you add to this the host domain controller, he lets know me that they are currently managed by another instance of vCenter...?

  Thanks in advance for the help.

  Thank you.

  Sounds like Modes related.

• Install the second instance with tns own

  Hello world

  I depending on the situation: we have Windows 2008 Server, I installed oracle 11g Standard Edition database. I want to install a second instance on this server.

  I try to use oracle database configuration manager and the installation was successful. But I can't connect to my trial because I got the error 'No TNS Listner'.

  So I create a second with the oracle network utilities. But I can not connect to the server, so I take a look at the service, there where two headphones started my new and TNSListener so I looked in the listener.ora there where only my new listener.

  After that, I restart the database but I sill got the error message and I could not service my trial dbconsole.

  So I remove the second instance.

  I want to ask if anyone has a tip for me or a best practice how to install a second instance with an own listener.

  Greetings

  How to install a second instance with an own listener.

  You need a listener of the second. Simply create the new database and your real listener is more than enough.

• The second instance to copy a single value of first instance.  All the following normal law.

  SubFormA

  TableA

  DropDownList1

  DropDownList2

  TextName

  DateToday

  NumericAlpha

  NumericaBeta

  ButtonDelete

  . / TableA

  ButtonAdd

  / SubformA

  Each field (indicated in bold) is mapped to a schema.  All non-fat items have links 'None' TableA has a default binding of None and is set to repeat for each item of data with no count of min, no max and no initial count.

  When I click on my "ButtonAdd" I create a new instance of TableA via "_TableA.addInstance (true)"; and I remove the instances via ButtonDelete: "_TableA.removeInstance (this.parent.index)" "»

  Foreword pretty simple so far.

  The problem is this: when I add a second instance of TableA, DropDownList1 copies the value of the first instance.  Furthermore, if I take a new choice in both cases DropDownList1, the change is reflected in the other.  Any other value is implemented with mirror like that.  In addition, if I add a third, fourth, etc. instance these instances work independently as expected.  Finally, if I remove the first two instances via ButtonDelete, all remaining occurrences continue to act normally.

  I have no idea why this is happening.  Any ideas?

  TableA must be bound to the repeating node in your schema.

  Paul

• 10g to Oracle Enterprise Manager Application Server Control does not work

  Hello
  We have installed the application on 9.21.0.98 Server (solaris machine).
  For the server is woking, but the report server does not.
  
  Now I want to connect to Oracle Enterprise Manager 10 g Application Server Control
  to solve the problem
  
  In my PC (windows), I opened internet explorere (IE), and I entered the following URL
  http://9.21.0.98:7778 / (7778 is probably http port)
  Now I see a web page.
  
  Here I see the following on the right side of the page
  
  Oracle Application Server Logins
  
  To manage and monitor Oracle Application Server,
  
  Log on to Oracle Enterprise Manager 10g Application Server Control:
  username: ias_admin
  password: specified during installation
  
  When I click on this link http://9.21.0.98:1156 / URL has appeared on the IE and I get the following error
  Internet Explorer cannot display this webpage
  
  Now to see if any application is running on this port (1156), I logged the solaris machine where the application server is intalled and I exected netstat - a | grep 1156 command. But he didn't show me anything
  
  Could you please solve my problem?
  
  Concerning

  Is it possible to change the name of report server?

  See Paulo Esteves answer in How to change the name of the report server?

• Available to add the second internal hard drive to 17-e117dx

  Hello

  Can you let me know, if there is provision to add the second internal hard drive for HP Pavilion e117dx 17.

  If so, one) is there requirments or the specifications of the hard disk (any make or model); (b) what equipment will be needed and where I can get to and c) Finally will be doing so make sure the warranty of my laptop HP Sub

  HP Pavilion

  Product: F9J38UA #ABA

  Model: 17-e117dx

  Thank you

  Not in the way you probably do. Here is the Service Manual:

  Manual

  See Page 50. Unlike the Envy 17 and Pavilion dv7, Pavilion 17 has that a single hard drive Bay. The only way to add a second hard drive is to remove the DVD (optical drive) and insert a DVD to the hard drive bay adapter. The manual shows how to remove the DVD player and you can buy the adapter at amazon.com or jacobsparts.com. Note that this is a 9.5 mm thick disc, not a 12.7 mm. Both types are available. I do not recommend the adapter DVD player solution because you lose the use of the optical drive, and also because the interface of optical drive is usually not as fast as the main hard drive interface. Always fast enough for simple storage and you can run a video of her, but you do not want to edit the video of this disc, for example.

  https://www.jacobsparts.com/items/HDDBAY-02/

  If you decide to go the route of adapter DVD I would buy a large capacity 5400 RPM SATA 2.5 inches wide and drive hard thickness 9.5 mm. No sense in buying a reader more expensive high-performance.

  http://www.Newegg.com/product/product.aspx?item=N82E16822178006

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• management of the PDBs with Oracle Enterprise Manager Express

  Hello

  is 12 c, possible to manage the PDBs with Oracle Enterprise Manager Express?

  How to find the URL?

  When I run select dbms_xdb_config.gethttpsport (double); on a PDB file, it returns no rows.

  More tutorials

  https://Apex.Oracle.com/pls/Apex/f?p=44785:24:4833387311898:P24_CONTENT_ID, P24_PREV_PAGE:6282, 24

  I have not seen.

  Thank you.

  is 12 c, possible to manage the PDBs with Oracle Enterprise Manager Express?

  Yes - but you will not have the COMPLETE management functionality. See the FAQ doc:

  http://www.Oracle.com/technetwork/database/manageability/emx-CDB-1965987.html

  Can I Plug and unplug the PDBs with EM Express?

  No, EM Express does not all CBD management capabilities in DB 12.1.0.1.0.

  Review ALL sections of doc

  How to find the URL?

  When I run select dbms_xdb_config.gethttpsport (double); on a PDB file, it returns no rows.

  Have you set up EM and set the port to the PDB? Again - see the FAQ doc

  http://www.Oracle.com/technetwork/database/manageability/emx-intro-1965965.html#A5

  How can I configure EM Express on CBD and APB?

  Users can configure EM Express at the root and container of the PDB, with each container using another HTTP/HTTPS port.  When it is connected to the root container, the information displayed are the entire database, including all PDB files.  When it is connected to a PDB file, displayed information is limited to the PDB data.  For more information, see the section on EM Express on the CBD.

  http://www.Oracle.com/technetwork/database/manageability/emx-intro-1965965.html

• Advanced conditional action does not work when I add the second condition

  I use CP 8. I can't understand why I'm running on this problem. I have a series of If-Then conditional actions, but I am running into problems. I narrowed down it to this problem.

  It is a simple check box that must show either the box or not.

  

  As long as I have only one condition, it works fine. As soon as I add the second condition, it stops working.

  

  Any suggestions? I appreciate the help!

  Rick and I tried to explain that a conditional action is always executed completely. This is the reason that the second decision has been reset what had been done in the first in your first question. I have a lot of articles on my blog where I point out that bad sequence in the decision (or) is causing most of the problems with conditional advanced (shared) actions.

• Add the second NETWORK card to vSwitch

  I'm working on trying to add to install a second NIC physical to the vswitch which is installed by default when ESXi. I use the code below, but when I run it, it disconnects in fact the main physical network card and of course, I then lose connection. I tried different varients of this and even finished by adding a port of vmk, which I didn't do. I just want to add the second network card as a standby card network.

  #Add second NIC to the virtual switch
  $nic = Get-VirtualSwitch -VMHost $currentHost -Name "vSwitch0"
  Set-VirtualSwitch -VirtualSwitch $nic -Nic vmnic1
  

  The cmdlet Set-VirtualSwitch accepts a string array as the value of the parameter - Nic. So you should be able to:

  #Add second NIC to the virtual switch
  $nic = Get-VirtualSwitch -VMHost $currentHost -Name "vSwitch0"
  Set-VirtualSwitch -VirtualSwitch $nic -Nic vmnic1,vmnic2
  

  Best regards, Robert

• The right of way to access the users Page in Enterprise Manager?

  Using 11 GR 1 material Enterprise Manager Database Control
  
  I was looking for the instructions in the online help of Enterprise Manager, on how to change a password. The research has about 6 000 hits: big help that was.
  
  I finally found what I was looking for, BUT...
  
  I clicked on an entry in the online help which says "expires. Locking and unlocking accounts database". On this page, there are some very nice step-by-step instructions. Step 3 says "Schema click to display the Sub-page of scheme." It worked as expected. Step 4 says "In the section users and privileges, click on users." I studied this subpage of schema and same process to a search page Firefox and there is no section users and privileges anywhere on the subpage of schema. I could only access the page I was looking for because the word "Users" in the online help page is itself a link to the page I was looking for.
  
  I apologize for the blow of mouth here, but it's really frustrating and...
  
  OK, ' nough said. What I want to really know is how to get to the page of users without having to evade the online help to find a link that will take me to the page of users. Is there a way reasonably self evident to navigate users to Enterprise Manager Database Control?
  
  Thank you
  
  Gregory

  Gregory,

  Although I'm 11.2 running on my laptop but I have not installed EM top. Can you please confirm that looking for the oracle user password change? If so, there will be a Server tab. In this, you should find a link to the user . From there on, a list of users would come, and you can choose your username. Click Edit and change the password.

  That said, I'm not sure if the docs are confusing. In the 2-day DBA guide, I got it immediately.
  http://download.Oracle.com/docs/CD/E11882_01/server.112/e10897/users_secure.htm#CHDJEBDG

  And from there, I don't think it's hard to do what I understand you want to do. If this isn't the case, please be more specific.

  HTH
  Aman...

• Oracle Enterprise Manager Fusion Middleware control

  After installing SOA Suite 11.1.1.4, I can use Oracle Enterprise Manager Fusion Middleware control.
  If I install just stand-alone weblogic 10.3.5, where can I download Oracle Enterprise Manager Fusion Middleware control 11.1.1.4/5?
  
  Not Enterprise Manager 11 g Grid Control Release 1 (11.1.0.1.0) is equal to Oracle Enterprise Manager Fusion Middleware control?

  You must run the installation program of the Dev Runtime App on top of an installation of WLS. According to the blog, it seems that you also need the creation of repository (RCU), utility that creates a database schema. I don't know the proper documentation explains all of the minimum requirements.

  This is a blog about JDeveloper and JDeveloper is not mandatory.
  http://jdeveloperfaq.blogspot.com/2010/02/FAQ-11-how-to-install-and-configure.html

• How to remove the EM Oracle Enterprise Manager for database component.

  We have a database that someone used in the past as repository EM grid. It is no longer in use. You are looking for documentation on how the drop. If anyone knows please give me with link to open the document Oracle.
  
  Oracle 11 g version 1 material.
  
  Thank you.

  I think that if you can't find the instructions on how to remove EM you can drop the user cleaning sysman repositiry owner then the database parameters of database associated with EM.

  I think that the starting point would be the EM (Grid Control) installation manual for your version of Oracle and platform.

  10g list installation manuals
  http://OTN.Oracle.com/pls/db102/drilldown?levelnum=2&toplevel=b31288&method=like&chapters=0&book=&wildcards=1&preference=&expand_all=&result_id=&verb=installing&Word=Enterprise+Manager#b31288

  HTH - Mark D Powell.

• It is possible to add records to tables using Enterprise Manager?

  Can we add records to tables using Oracle Enterprise Manager web interface instead of the sqlplus commands? If not, is there an easy way to insert data into the table using a GUI?
  

  Yes, you can use the most common and free GUI tools like SQL Developer
  You can find more information about this
  http://www.Oracle.com/technology/products/database/sql_developer/index.html

  Francis

• HP compaq 8200 elite sff: Add the second hard drive to 8200 elite sff

  I installed a second hard drive, but the system does not reqagnize it.  I connected the blue sata port.  Any help?

  Well shit, now I have to retype my response... I typed in Notepad, but it seems that I can't copy and paste into this box.

  I agree with DFBonnett, the second disc will only work on the BLACK, not BLUE light connector.

  The way I Win-10 to see the second drive was to go to the management of the computer, and then under storage, click Disk Management: the drive is presented as a disc 1 but not show the program explores until I received a letter from the disk drive... MAGIC, the player will now display as the letter assigned to the I gave him 'E' with a backup label.

  I tried what erico posted but has not worked, but I thank all of you who have tried to help.

  I give credit to Umbutu, he saw the drive without having to do anything myself.

  Hey Microsoft, look at what Linux can do... lol

• Is it possible to add the second cooler to my QOSMIO

  I WOULD LIKE TO ASK IF IT IS POSSIBLE TO ADD THIS SECOND COOLER TO MY LAPTOP * (TOSHIBA QOSMIO - X 300 130) BECAUSE MY LAPTOP SHUTSDOWN WHEN I PLAY GAMES...
  * PIC ALL WHAT I want TO SAY... * http://www.irisvista.com/tech/laptops/Toshiba-Qosmio-X305/big/removing-laptop-motherboard-33.jpg

  AS I HAVE SEE YES BUT WHERE CAN I FIND ONE SUCH COOLER IN YM (BULGARIA)
  EVRYTHING STILL IN WARRANTY

  Post edited by: aloushi

  Hello

  No, it s not possible to add a second cooling fan to the motherboard notebook from the motherboard layout allows and the laptop does not have such extra part.

  But you can test some buffers cooling like this:
  [Photos of cooling pads: http://www.google.de/images?hl=de&q=cooling%20pads&wrapid=tlif130302876 790621 & um = 1 & ie = UTF-8 & source = og & his = N & tab = wi]